The neighbour table establishes bindings between protocol addresses and link layer addresses for hosts sharing the same physical link. More...

Functions
int	rtnl_neigh_parse (struct nlmsghdr n, struct rtnl_neigh *result)

Neighbour Object Allocation/Freeage
struct rtnl_neigh *	rtnl_neigh_alloc (void)

void	rtnl_neigh_put (struct rtnl_neigh *neigh)

Neighbour Cache Managament
int	rtnl_neigh_alloc_cache (struct nl_sock sock, struct nl_cache *result)
	Build a neighbour cache including all neighbours currently configured in the kernel. More...

struct rtnl_neigh *	rtnl_neigh_get (struct nl_cache cache, int ifindex, struct nl_addr dst)
	Look up a neighbour by interface index and destination address. More...

Neighbour Addition
int	rtnl_neigh_build_add_request (struct rtnl_neigh tmpl, int flags, struct nl_msg *result)
	Build netlink request message to add a new neighbour. More...

int	rtnl_neigh_add (struct nl_sock sk, struct rtnl_neigh tmpl, int flags)
	Add a new neighbour. More...

Neighbour Deletion
int	rtnl_neigh_build_delete_request (struct rtnl_neigh neigh, int flags, struct nl_msg *result)
	Build a netlink request message to delete a neighbour. More...

int	rtnl_neigh_delete (struct nl_sock sk, struct rtnl_neigh neigh, int flags)
	Delete a neighbour. More...

Neighbour States Translations
char *	rtnl_neigh_state2str (int state, char *buf, size_t len)

int	rtnl_neigh_str2state (const char *name)

Neighbour Flags Translations
char *	rtnl_neigh_flags2str (int flags, char *buf, size_t len)

int	rtnl_neigh_str2flag (const char *name)

Attributes
void	rtnl_neigh_set_state (struct rtnl_neigh *neigh, int state)

int	rtnl_neigh_get_state (struct rtnl_neigh *neigh)

void	rtnl_neigh_unset_state (struct rtnl_neigh *neigh, int state)

void	rtnl_neigh_set_flags (struct rtnl_neigh *neigh, unsigned int flags)

unsigned int	rtnl_neigh_get_flags (struct rtnl_neigh *neigh)

void	rtnl_neigh_unset_flags (struct rtnl_neigh *neigh, unsigned int flags)

void	rtnl_neigh_set_ifindex (struct rtnl_neigh *neigh, int ifindex)

int	rtnl_neigh_get_ifindex (struct rtnl_neigh *neigh)

void	rtnl_neigh_set_lladdr (struct rtnl_neigh neigh, struct nl_addr addr)

struct nl_addr *	rtnl_neigh_get_lladdr (struct rtnl_neigh *neigh)

int	rtnl_neigh_set_dst (struct rtnl_neigh neigh, struct nl_addr addr)

struct nl_addr *	rtnl_neigh_get_dst (struct rtnl_neigh *neigh)

void	rtnl_neigh_set_family (struct rtnl_neigh *neigh, int family)

int	rtnl_neigh_get_family (struct rtnl_neigh *neigh)

void	rtnl_neigh_set_type (struct rtnl_neigh *neigh, int type)

int	rtnl_neigh_get_type (struct rtnl_neigh *neigh)

Detailed Description

The neighbour table establishes bindings between protocol addresses and link layer addresses for hosts sharing the same physical link.

This module allows you to access and manipulate the content of these tables.

Neighbour States: NUD_INCOMPLETE

NUD_REACHABLE

NUD_STALE

NUD_DELAY

NUD_PROBE

NUD_FAILED

NUD_NOARP

NUD_PERMANENT

Neighbour Flags: NTF_USE

NTF_PROXY

NTF_ROUTER

Neighbour Identification

A neighbour is uniquely identified by the attributes listed below, whenever you refer to an existing neighbour all of the attributes must be set. Neighbours from caches automatically have all required attributes set.

interface index (rtnl_neigh_set_ifindex())
destination address (rtnl_neigh_set_dst())

Changeable Attributes

state (rtnl_neigh_set_state())
link layer address (rtnl_neigh_set_lladdr())

Required Caches for Dumping

In order to dump neighbour attributes you must provide the following caches via nl_cache_provide()

link cache holding all links

TODO

Document proxy settings
Document states and their influence

1) Retrieving information about configured neighbours: // The first step is to retrieve a list of all available neighbour within

// the kernel and put them into a cache.

struct nl_cache *cache = rtnl_neigh_alloc_cache(sk);

// Neighbours can then be looked up by the interface and destination

// address:

struct rtnl_neigh *neigh = rtnl_neigh_get(cache, ifindex, dst_addr);

// After successful usage, the object must be given back to the cache

rtnl_neigh_put(neigh);

2) Adding new neighbours: // Allocate an empty neighbour handle to be filled out with the attributes

// of the new neighbour.

struct rtnl_neigh *neigh = rtnl_neigh_alloc();

// Fill out the attributes of the new neighbour

rtnl_neigh_set_ifindex(neigh, ifindex);

rtnl_neigh_set_dst(neigh, dst_addr);

rtnl_neigh_set_state(neigh, rtnl_neigh_str2state("permanent"));

// Build the netlink message and send it to the kernel, the operation will

// block until the operation has been completed. Alternatively the required

// netlink message can be built using rtnl_neigh_build_add_request()

// to be sent out using nl_send_auto_complete().

rtnl_neigh_add(sk, neigh, NLM_F_CREATE);

// Free the memory

rtnl_neigh_put(neigh);

3) Deleting an existing neighbour: // Allocate an empty neighbour object to be filled out with the attributes

// matching the neighbour to be deleted. Alternatively a fully equipped

// neighbour object out of a cache can be used instead.

struct rtnl_neigh *neigh = rtnl_neigh_alloc();

// Neighbours are uniquely identified by their interface index and

// destination address, you may fill out other attributes but they

// will have no influence.

rtnl_neigh_set_ifindex(neigh, ifindex);

rtnl_neigh_set_dst(neigh, dst_addr);

// Build the netlink message and send it to the kernel, the operation will

// block until the operation has been completed. Alternatively the required

// netlink message can be built using rtnl_neigh_build_delete_request()

// to be sent out using nl_send_auto_complete().

rtnl_neigh_delete(sk, neigh, 0);

// Free the memory

rtnl_neigh_put(neigh);

4) Changing neighbour attributes: // Allocate an empty neighbour object to be filled out with the attributes

// matching the neighbour to be changed and the new parameters. Alternatively

// a fully equipped modified neighbour object out of a cache can be used.

struct rtnl_neigh *neigh = rtnl_neigh_alloc();

// Identify the neighbour to be changed by its interface index and

// destination address

rtnl_neigh_set_ifindex(neigh, ifindex);

rtnl_neigh_set_dst(neigh, dst_addr);

// The link layer address may be modified, if so it is wise to change

// its state to "permanent" in order to avoid having it overwritten.

rtnl_neigh_set_lladdr(neigh, lladdr);

// Secondly the state can be modified allowing normal neighbours to be

// converted into permanent entries or to manually confirm a neighbour.

rtnl_neigh_set_state(neigh, state);

// Build the netlink message and send it to the kernel, the operation will

// block until the operation has been completed. Alternatively the required

// netlink message can be built using rtnl_neigh_build_change_request()

// to be sent out using nl_send_auto_complete().

rtnl_neigh_add(sk, neigh, NLM_F_REPLACE);

// Free the memory

rtnl_neigh_put(neigh);

Function Documentation

int rtnl_neigh_alloc_cache	(	struct nl_sock *	sock,
		struct nl_cache **	result
	)

Build a neighbour cache including all neighbours currently configured in the kernel.

Parameters

sock	Netlink socket.
result	Pointer to store resulting cache.

Allocates a new neighbour cache, initializes it properly and updates it to include all neighbours currently configured in the kernel.

Returns: 0 on success or a negative error code.

Definition at line 527 of file neigh.c.

References nl_cache_alloc_and_fill().

Here is the call graph for this function:

struct rtnl_neigh* rtnl_neigh_get	(	struct nl_cache *	cache,
		int	ifindex,
		struct nl_addr *	dst
	)

read

Look up a neighbour by interface index and destination address.

Parameters

cache	neighbour cache
ifindex	interface index the neighbour is on
dst	destination address of the neighbour

Returns: neighbour handle or NULL if no match was found.

Definition at line 540 of file neigh.c.

References nl_addr_cmp(), and nl_object_get().

Here is the call graph for this function:

int rtnl_neigh_build_add_request	(	struct rtnl_neigh *	tmpl,
		int	flags,
		struct nl_msg **	result
	)

Build netlink request message to add a new neighbour.

Parameters

tmpl	template with data of new neighbour
flags	additional netlink message flags
result	Pointer to store resulting message.

Builds a new netlink message requesting a addition of a new neighbour. The netlink message header isn't fully equipped with all relevant fields and must thus be sent out via nl_send_auto_complete() or supplemented as needed. tmpl must contain the attributes of the new neighbour set via rtnl_neigh_set_* functions.

The following attributes must be set in the template:

Interface index (rtnl_neigh_set_ifindex())
State (rtnl_neigh_set_state())
Destination address (rtnl_neigh_set_dst())
Link layer address (rtnl_neigh_set_lladdr())

Returns: 0 on success or a negative error code.

Definition at line 627 of file neigh.c.

Referenced by rtnl_neigh_add().

Here is the caller graph for this function:

int rtnl_neigh_add	(	struct nl_sock *	sk,
		struct rtnl_neigh *	tmpl,
		int	flags
	)

Add a new neighbour.

Parameters

sk	Netlink socket.
tmpl	template with requested changes
flags	additional netlink message flags

Builds a netlink message by calling rtnl_neigh_build_add_request(), sends the request to the kernel and waits for the next ACK to be received and thus blocks until the request has been fullfilled.

The following attributes must be set in the template:

Interface index (rtnl_neigh_set_ifindex())
State (rtnl_neigh_set_state())
Destination address (rtnl_neigh_set_dst())
Link layer address (rtnl_neigh_set_lladdr())

Returns: 0 on sucess or a negative error if an error occured.

Definition at line 651 of file neigh.c.

References nl_send_auto_complete(), nlmsg_free(), and rtnl_neigh_build_add_request().

Here is the call graph for this function:

int rtnl_neigh_build_delete_request	(	struct rtnl_neigh *	neigh,
		int	flags,
		struct nl_msg **	result
	)

Build a netlink request message to delete a neighbour.

Parameters

neigh	neighbour to delete
flags	additional netlink message flags
result	Pointer to store resulting message.

Builds a new netlink message requesting a deletion of a neighbour. The netlink message header isn't fully equipped with all relevant fields and must thus be sent out via nl_send_auto_complete() or supplemented as needed. neigh must point to an existing neighbour.

Returns: 0 on success or a negative error code.

Definition at line 688 of file neigh.c.

Referenced by rtnl_neigh_delete().

Here is the caller graph for this function:

int rtnl_neigh_delete	(	struct nl_sock *	sk,
		struct rtnl_neigh *	neigh,
		int	flags
	)

Delete a neighbour.

Parameters

sk	Netlink socket.
neigh	neighbour to delete
flags	additional netlink message flags

Builds a netlink message by calling rtnl_neigh_build_delete_request(), sends the request to the kernel and waits for the next ACK to be received and thus blocks until the request has been fullfilled.

Returns: 0 on sucess or a negative error if an error occured.

Definition at line 706 of file neigh.c.

References nl_send_auto_complete(), nlmsg_free(), and rtnl_neigh_build_delete_request().

Here is the call graph for this function:

Functions

Neighbour Object Allocation/Freeage

Neighbour Cache Managament

Neighbour Addition

Neighbour Deletion

Neighbour States Translations

Neighbour Flags Translations

Attributes

Detailed Description

Function Documentation