Using gcov with the Linux kernel

gcov profiling kernel support enables the use of GCC’s coverage testing tool gcov with the Linux kernel. Coverage data of a running kernel is exported in gcov-compatible format via the “gcov” debugfs directory. To get coverage data for a specific file, change to the kernel build directory and use gcov with the -o option as follows (requires root):

# cd /tmp/linux-out
# gcov -o /sys/kernel/debug/gcov/tmp/linux-out/kernel spinlock.c

This will create source code files annotated with execution counts in the current directory. In addition, graphical gcov front-ends such as lcov can be used to automate the process of collecting data for the entire kernel and provide coverage overviews in HTML format.

Possible uses:

  • debugging (has this line been reached at all?)

  • test improvement (how do I change my test to cover these lines?)

  • minimizing kernel configurations (do I need this option if the associated code is never run?)

Preparation

Configure the kernel with:

CONFIG_DEBUG_FS=y
CONFIG_GCOV_KERNEL=y

and to get coverage data for the entire kernel:

CONFIG_GCOV_PROFILE_ALL=y

Note that kernels compiled with profiling flags will be significantly larger and run slower. Also CONFIG_GCOV_PROFILE_ALL may not be supported on all architectures.

Profiling data will only become accessible once debugfs has been mounted:

mount -t debugfs none /sys/kernel/debug

Customization

To enable profiling for specific files or directories, add a line similar to the following to the respective kernel Makefile:

  • For a single file (e.g. main.o):

    GCOV_PROFILE_main.o := y
    
  • For all files in one directory:

    GCOV_PROFILE := y
    

To exclude files from being profiled even when CONFIG_GCOV_PROFILE_ALL is specified, use:

GCOV_PROFILE_main.o := n

and:

GCOV_PROFILE := n

Only files which are linked to the main kernel image or are compiled as kernel modules are supported by this mechanism.

Files

The gcov kernel support creates the following files in debugfs:

/sys/kernel/debug/gcov

Parent directory for all gcov-related files.

/sys/kernel/debug/gcov/reset

Global reset file: resets all coverage data to zero when written to.

/sys/kernel/debug/gcov/path/to/compile/dir/file.gcda

The actual gcov data file as understood by the gcov tool. Resets file coverage data to zero when written to.

/sys/kernel/debug/gcov/path/to/compile/dir/file.gcno

Symbolic link to a static data file required by the gcov tool. This file is generated by gcc when compiling with option -ftest-coverage.

Modules

Kernel modules may contain cleanup code which is only run during module unload time. The gcov mechanism provides a means to collect coverage data for such code by keeping a copy of the data associated with the unloaded module. This data remains available through debugfs. Once the module is loaded again, the associated coverage counters are initialized with the data from its previous instantiation.

This behavior can be deactivated by specifying the gcov_persist kernel parameter:

gcov_persist=0

At run-time, a user can also choose to discard data for an unloaded module by writing to its data file or the global reset file.

Separated build and test machines

The gcov kernel profiling infrastructure is designed to work out-of-the box for setups where kernels are built and run on the same machine. In cases where the kernel runs on a separate machine, special preparations must be made, depending on where the gcov tool is used:

  1. gcov is run on the TEST machine

    The gcov tool version on the test machine must be compatible with the gcc version used for kernel build. Also the following files need to be copied from build to test machine:

    from the source tree:
    • all C source files + headers

    from the build tree:
    • all C source files + headers

    • all .gcda and .gcno files

    • all links to directories

    It is important to note that these files need to be placed into the exact same file system location on the test machine as on the build machine. If any of the path components is symbolic link, the actual directory needs to be used instead (due to make’s CURDIR handling).

  2. gcov is run on the BUILD machine

    The following files need to be copied after each test case from test to build machine:

    from the gcov directory in sysfs:
    • all .gcda files

    • all links to .gcno files

    These files can be copied to any location on the build machine. gcov must then be called with the -o option pointing to that directory.

    Example directory setup on the build machine:

    /tmp/linux:    kernel source tree
    /tmp/out:      kernel build directory as specified by make O=
    /tmp/coverage: location of the files copied from the test machine
    
    [user@build] cd /tmp/out
    [user@build] gcov -o /tmp/coverage/tmp/out/init main.c
    

Note on compilers

GCC and LLVM gcov tools are not necessarily compatible. Use gcov to work with GCC-generated .gcno and .gcda files, and use llvm-cov for Clang.

Build differences between GCC and Clang gcov are handled by Kconfig. It automatically selects the appropriate gcov format depending on the detected toolchain.

Troubleshooting

Problem

Compilation aborts during linker step.

Cause

Profiling flags are specified for source files which are not linked to the main kernel or which are linked by a custom linker procedure.

Solution

Exclude affected source files from profiling by specifying GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the corresponding Makefile.

Problem

Files copied from sysfs appear empty or incomplete.

Cause

Due to the way seq_file works, some tools such as cp or tar may not correctly copy files from sysfs.

Solution

Use cat to read .gcda files and cp -d to copy links. Alternatively use the mechanism shown in Appendix B.

Appendix A: gather_on_build.sh

Sample script to gather coverage meta files on the build machine (see 6a):

#!/bin/bash

KSRC=$1
KOBJ=$2
DEST=$3

if [ -z "$KSRC" ] || [ -z "$KOBJ" ] || [ -z "$DEST" ]; then
  echo "Usage: $0 <ksrc directory> <kobj directory> <output.tar.gz>" >&2
  exit 1
fi

KSRC=$(cd $KSRC; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
KOBJ=$(cd $KOBJ; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)

find $KSRC $KOBJ \( -name '*.gcno' -o -name '*.[ch]' -o -type l \) -a \
                 -perm /u+r,g+r | tar cfz $DEST -P -T -

if [ $? -eq 0 ] ; then
  echo "$DEST successfully created, copy to test system and unpack with:"
  echo "  tar xfz $DEST -P"
else
  echo "Could not create file $DEST"
fi

Appendix B: gather_on_test.sh

Sample script to gather coverage data files on the test machine (see 6b):

#!/bin/bash -e

DEST=$1
GCDA=/sys/kernel/debug/gcov

if [ -z "$DEST" ] ; then
  echo "Usage: $0 <output.tar.gz>" >&2
  exit 1
fi

TEMPDIR=$(mktemp -d)
echo Collecting data..
find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
tar czf $DEST -C $TEMPDIR sys
rm -rf $TEMPDIR

echo "$DEST successfully created, copy to build system and unpack with:"
echo "  tar xfz $DEST"