]> www.infradead.org Git - users/dwmw2/esp32-pool.git/shortlog
users/dwmw2/esp32-pool.git
2025-04-07 David Woodhousepool: Add frost protection master
2025-03-31 David WoodhouseMake encoder direction a parameter
2025-03-09 David WoodhouseFix up "production" motor direction and GPIO for reed...
2025-02-27 David Woodhousemore cleanups and parameterisation for blinds
2025-02-12 David Woodhouseparameterise voltage
2025-02-12 David WoodhouseGo slower when rehoming
2025-02-12 David Woodhousereset home once tension is gone
2025-02-12 David Woodhousemore stall testing
2025-02-12 David Woodhouseparameterise current/speed/stallguard
2025-02-12 David WoodhouseStop motor *after* the part that depends on which way...
2025-02-12 David WoodhouseOnly reset home on stall if travelling upwards
2025-02-12 David WoodhouseAdd reed switch, log all stop calls, device-specific...
2025-02-11 David WoodhouseReinstate Home command, adjust speed and stallguard...
2025-02-11 David WoodhouseCan go a little faster
2025-02-11 David WoodhouseRound cover percentage so it reaches closed
2025-02-11 David WoodhouseReduce current, set microsteps to 1, speed to 500 steps/s
2025-02-11 David WoodhouseIf sunrise is before 07:30, we don't want to know
2025-02-11 David WoodhouseFixed 50ms poll for encoder, to make open/close detecti...
2025-02-11 David WoodhouseReport opening/closing/idle
2025-02-11 David WoodhouseSet timezone explicitly
2025-02-11 David WoodhouseAdd absolute humidity
2025-02-11 David Woodhouseshort motor coils at standstill
2025-02-11 David WoodhouseFirst mostly working version of blind control
2024-12-28 David Woodhouserecalibrate softener balance
2024-12-15 David WoodhouseFix thermostat restart for UFH
2024-12-15 David WoodhouseMove clamp filter to ntc_resistance not temperature
2024-12-15 David WoodhouseKitchen UFH calibration
2024-12-09 David WoodhouseUse unified ufh.yaml for kitchen
2024-12-08 David WoodhouseTurn off UFH when no valid temperature readings to...
2024-12-08 David WoodhouseTurn on at estimated time instead of actually ramping up
2024-12-08 David WoodhouseSplit out underfloor heating / NTC logic to ufh.yaml
2024-12-02 David WoodhouseAdd kitchen unit
2024-12-02 David WoodhouseNo reboot on MQTT/WiFi outage
2024-12-02 David WoodhouseCorrect docs.
2024-10-20 David WoodhouseSet up MQTT AD for the smart meter
2024-10-18 David WoodhouseReport 90 min max (to avoid trigging notifications...
2024-10-18 David WoodhouseAvoid rewriting flow temp
2024-10-17 David WoodhouseRamp up flow temp slowly
2024-10-16 David WoodhouseMake auto flow temp properly optional
2024-10-16 David Woodhouseless noise
2024-10-15 David Woodhousefeed to Emoncms
2024-10-14 David WoodhouseFeed EmonCMS
2024-10-14 David Woodhouseadd support for feeding to Emoncms
2024-10-14 David WoodhouseMore smoothing
2024-10-03 David WoodhouseKill local globals and just use climate
2024-10-03 David WoodhouseAdd climate thermostat
2024-10-03 David WoodhouseUnderfloor heating for bathroom
2024-09-28 David Woodhousesend COP every time
2024-09-28 David WoodhouseCompute COP
2024-09-28 David WoodhouseAdd heishamon
2024-09-28 David Woodhouserename power-light3
2024-09-28 David Woodhouseclean up faikin
2024-09-28 David WoodhouseBK7231 IPv6 support, hbridge, and BL0942 fixes
2024-09-06 David Woodhouseoldsoftener bl0942 test
2024-09-06 David WoodhouseUse cbu for Tongou units
2024-09-06 David Woodhouseupdate other devices
2024-09-06 David WoodhouseAdd debug
2024-09-06 David WoodhouseUpdate power unit names
2024-09-06 David WoodhouseIPv6 support for bk72xx
2024-09-06 David Woodhouserough calibrations
2024-09-06 David WoodhouseSeparate MQTT log streams
2024-08-15 David WoodhouseAdd Tongou power meters
2024-08-11 David WoodhouseFix uniq_id for duplicate sensors
2024-08-11 David WoodhouseFix fan timeout if turned on via HA MQTT
2024-08-09 David WoodhouseFaikin finally working (with external pullup on RX)
2024-08-08 David WoodhouseHost mode ecodan support
2024-08-08 David Woodhouseesp-idf for Faikin too
2024-08-07 David Woodhouseupdate from MQTT
2024-08-07 David WoodhouseUpdate paper to use base.yaml
2024-08-07 David WoodhouseConvert pool to esp-idf and base.yaml
2024-08-07 David WoodhousePackage for humidity common code too
2024-08-07 David WoodhouseUse base package for softener
2024-08-07 David WoodhouseMove common config to base.yaml package
2024-08-07 David WoodhouseUse AtomS3 Lite for softener
2024-08-06 David WoodhouseUse dimmer switch for hum threshold, harmonise bathroom...
2024-08-05 David WoodhouseAdd humidity fan controller for toilet, tweak bathroom...
2024-07-31 David WoodhouseAdd esphome-ecodan-hp
2024-07-30 David WoodhouseAdd faikin module
2024-07-30 David WoodhouseStop turning the damn pump off!
2024-05-15 David WoodhouseOpen bypass valve when turning pump on even when the...
2024-05-13 David WoodhouseDocumentation
2024-05-13 David WoodhouseForce bypass valve open before timed pump switch-on...
2024-05-13 David WoodhouseTurn pump on in the morning when roof temp above 20°C
2024-05-10 David WoodhouseFix pump off time
2024-05-10 David WoodhouseAdjust on/off thresholds for valve
2024-05-09 David WoodhouseInput temp offset to 0.1°C; there's too much hysteresis...
2024-05-09 David WoodhouseRetain switch settings across reboot
2024-05-09 David WoodhouseTurn pump off when it gets cold after 5pm
2024-05-09 David WoodhouseDebug pump auto-on
2024-05-09 David WoodhouseAdjust delta for new input sensor
2024-05-08 David WoodhouseForce bypass valve open before turning pump on in the...
2024-05-08 David WoodhouseNew solar_in sensor in new pipework
2024-02-14 David WoodhousePaper working now
2024-01-26 David WoodhouseBUSY pin is inverted, not RESET
2024-01-26 David WoodhouseAlways turn the LEDs on
2024-01-14 David WoodhouseAdd epaper board
2023-11-27 David WoodhouseAdd water softener measure
2023-11-10 David WoodhouseAdd bathroom humidity sensor and fan control unit
2023-11-10 David WoodhouseFilter out zero temperatures too
2023-09-08 David WoodhouseMake it 0.2°C adjustment
next