]> www.infradead.org Git - users/jedix/linux-maple.git/shortlog
users/jedix/linux-maple.git
2016-03-16 Sumit Saxenamegaraid_sas: Make tape drives visible on PERC5 controllers
2016-03-16 sumit.saxena... megaraid_sas : Remove debug print from function megasas...
2016-03-16 sumit.saxena... megaraid_sas : Driver version upgrade
2016-03-16 sumit.saxena... megaraid_sas : SMAP restriction--do not access user...
2016-03-16 sumit.saxena... megaraid_sas: Make PI enabled VD 8 byte DMA aligned
2016-03-16 sumit.saxena... megaraid_sas: Initialize tasklet before setting up...
2016-03-16 sumit.saxena... megaraid_sas: Indicate online firmware upgrade support...
2016-03-16 sumit.saxena... megaraid_sas: Update OCR capability on controller prope...
2016-03-16 sumit.saxena... megaraid_sas: Do not use PAGE_SIZE for max_sectors
2016-03-16 sumit.saxena... megaraid_sas: Support for Cutlass (12 Gbps) controller
2016-03-16 sumit.saxena... megaraid_sas: Support for Intruder (12 Gbps) controller
2016-03-16 sumit.saxena... megaraid_sas: Remove PCI id checks
2016-03-16 sumit.saxena... megaraid_sas: Expose TAPE drives unconditionally
2016-03-16 sumit.saxena... megaraid_sas: Version update
2016-03-16 sumit.saxena... megaraid_sas: Code refactor for use of requestorId
2016-03-16 sumit.saxena... megaraid_sas: Fix validHandles check in I/O path
2016-03-16 sumit.saxena... megaraid_sas: Print critical firmware event messages
2016-03-16 sumit.saxena... megaraid_sas: Chip reset if driver fails to get IOC...
2016-03-16 sumit.saxena... megaraid_sas: Support for max_io_size 1MB
2016-03-16 sumit.saxena... megaraid_sas: Code cleanup-use local variable drv_ops...
2016-03-16 sumit.saxena... megaraid_sas: JBOD sequence number support
2016-03-16 sumit.saxena... megaraid_sas: Increase timeout to 60 secs for abort...
2016-03-16 sumit.saxena... megaraid_sas: Synchronize driver headers with firmware...
2016-03-16 Bjorn Helgaasmegaraid_sas: fix whitespace errors
2016-03-16 Bjorn Helgaasmegaraid_sas: use dev_printk when possible
2016-03-16 Suthikulpanit... megaraid_sas: fix TRUE and FALSE re-define build error
2016-03-16 Tomas Henzlmegaraid: fix irq setup process regression
2016-03-16 Sawan Chandakqla2xxx: Update driver version to 8.07.00.33.40.0-k.
2016-03-16 Chad Dupuisqla2xxx: Set relogin flag when we fail to queue login...
2016-03-16 Himanshu Madhaniqla2xxx: Enable T10-DIF for ISP27XX
2016-03-16 Harish Zunjarraoqla2xxx: Provide mbx info in BBCR data after mbx failure
2016-03-16 Joe Carnuccioqla2xxx: Avoid side effects when using endianizer macros.
2016-03-16 Harish Zunjarraoqla2xxx: Add support for Private link statistics counters.
2016-03-16 Sawan Chandakqla2xxx: Add support for buffer to buffer credit value...
2016-03-16 Sawan Chandakqla2xxx: Add support for online flash update for ISP27XX.
2016-03-16 Himanshu Madhaniqla2xxx: Allow fw to hold status before sending ABTS...
2016-03-16 Joe Carnuccioqla2xxx: Seed init-cb login timeout from nvram exclusively.
2016-03-16 Chad Dupuisqla2xxx: Remove unneeded link offline message.
2016-03-16 Andrea Arcangelifirmware: dmi_scan: Fix UUID endianness for SMBIOS...
2016-03-10 Rajmohan Manixhci: Workaround to get Intel xHCI reset working more...
2016-03-10 Don Bracehpsa: fix rmmod issues
2016-03-10 shane.seymourhpsa: fix issues with multilun devices
2016-03-10 Scott Beneshhpsa: add in new offline mode
2016-03-10 Don Bracehpsa: add in new controllers
2016-03-10 Don Bracehpsa: cleanup update scsi devices
2016-03-10 Joe Handzikhpsa: add sysfs entry path_info to show box and bay...
2016-03-10 Don Bracehpsa: add PMC-Sierra to copyright
2016-03-10 Don Bracehpsa: correct static checker warnings on driver init...
2016-03-10 Don Bracehpsa: correct decode sense data
2016-03-10 Don Bracehpsa: Correct double unlock of mutex
2016-03-10 Don Bracehpsa: change driver version
2016-03-10 Don Bracehpsa: add in new controller id
2016-03-10 Don Bracehpsa: dont meddle with hw which isn't ours
2016-03-10 Webb Scaleshpsa: cleanup reset
2016-03-10 Robert Elliotthpsa: propagate the error code in hpsa_kdump_soft_reset
2016-03-10 Robert Elliotthpsa: use scsi host_no as hpsa controller number
2016-03-10 Webb Scaleshpsa: use block layer tag for command allocation
2016-03-10 Robert Elliotthpsa: add interrupt number to /proc/interrupts interrup...
2016-03-10 Robert Elliotthpsa: create workqueue after the driver is ready for use
2016-03-10 Robert Elliotthpsa: fix try_soft_reset error handling
2016-03-10 Robert Elliotthpsa: cleanup for init_one step 2 in kdump
2016-03-10 Robert Elliotthpsa: skip free_irq calls if irqs are not allocated
2016-03-10 Robert Elliotthpsa: call pci_release_regions after pci_disable_device
2016-03-10 Webb Scaleshpsa: performance tweak for hpsa_scatter_gather()
2016-03-10 Webb Scaleshpsa: refactor and rework support for sending TEST_UNIT...
2016-03-10 Webb Scaleshpsa: don't return abort request until target is complete
2016-03-10 Webb Scaleshpsa: use helper routines for finishing commands
2016-03-10 Stephen Cameronhpsa: add support sending aborts to physical devices...
2016-03-10 Robert Elliotthpsa: do not print ioaccel2 warning messages about...
2016-03-10 Robert Elliotthpsa: clean up some error reporting output in abort...
2016-03-10 Robert Elliotthpsa: clean up driver init
2016-03-10 Robert Elliotthpsa: correct return values from driver functions.
2016-03-10 Robert Elliotthpsa: do not check cmd_alloc return value - it cannnot...
2016-03-10 Joe Handzikhpsa: add more ioaccel2 error handling, including under...
2016-03-10 Webb Scaleshpsa: add ioaccel sg chaining for the ioaccel2 path
2016-03-10 Robert Elliotthpsa: refactor freeing of resources into more logical...
2016-03-10 Robert Elliotthpsa: clean up error handling
2016-03-10 Robert Elliotthpsa: break hpsa_free_irqs_and_disable_msix into two...
2016-03-10 Joe Handzikhpsa: Get queue depth from identify physical bmic for...
2016-03-10 Joe Handzikhpsa: use ioaccel2 path to submit IOs to physical drive...
2016-03-10 Robert Elliotthpsa: print accurate SSD Smart Path Enabled status
2016-03-10 Webb Scaleshpsa: factor out hpsa_ioaccel_submit function
2016-03-10 Stephen Cameronhpsa: try resubmitting down raid path on task set full
2016-03-10 Stephen Cameronhpsa: do not ignore return value of hpsa_register_scsi
2016-03-10 Stephen Cameronhpsa: factor out hpsa_init_cmd function
2016-03-10 Robert Elliotthpsa: make function names consistent
2016-03-10 Stephen Cameronhpsa: allow lockup detected to be viewed via sysfs
2016-03-10 Stephen Cameronhpsa: hpsa decode sense data for io and tmf
2016-03-10 Stephen Cameronhpsa: decrement h->commands_outstanding in fail_all_out...
2016-03-10 Stephen Cameronhpsa: clean up aborts
2016-03-10 Webb Scaleshpsa: rework controller command submission
2016-03-10 Webb Scaleshpsa: clean up host, channel, target, lun prints
2016-03-10 Stephen Cameronhpsa: add masked physical devices into h->dev[] array
2016-03-10 Jesse Brandeburgi40e/i40evf: Bump i40e to 1.4.25 and i40evf to 1.4.15
2016-03-10 Mitch Williamsi40e: let go of the past
2016-03-10 Pandi Kumar... i40e: suspend scheduling during driver unload
2016-03-10 Shannon Nelsoni40e: Use the new rx ctl register helpers. Don't use...
2016-03-10 Shannon Nelsoni40e: implement and use Rx CTL helper functions
2016-03-10 Shannon Nelsoni40e: add adminq commands for Rx CTL registers
2016-03-10 John Underwoodi40e: add check for null VSI
next