From e5b2a356dc8a88708d97bd47cca3b8f7ed7af6cb Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 30 Jan 2025 16:16:20 -0800 Subject: [PATCH 01/16] MAINTAINERS: include linux-mm for xarray maintenance MM developers have an interest in the xarray code. Cc: David Gow Cc: Geert Uytterhoeven Cc: "Liam R. Howlett" Cc: Lorenzo Stoakes Cc: Matthew Wilcox Cc: Sidhartha Kumar Cc: Tamir Duberstein Signed-off-by: Andrew Morton --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index f52a004982c9..ab7463b2f165 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -25729,6 +25729,7 @@ F: arch/x86/entry/vdso/ XARRAY M: Matthew Wilcox L: linux-fsdevel@vger.kernel.org +L: linux-mm@kvack.org S: Supported F: Documentation/core-api/xarray.rst F: include/linux/idr.h -- 2.51.0 From 2c4627c8ced77855b106c7104ecab70837d53799 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sun, 2 Feb 2025 10:43:02 -0600 Subject: [PATCH 02/16] tools/power turbostat: version 2025.02.02 Summary of Changes since 2024.11.30: Fix regression in 2023.11.07 that affinitized forked child in one-shot mode. Harden one-shot mode against hotplug online/offline Enable RAPL SysWatt column by default. Add initial PTL, CWF platform support. Harden initial PMT code in response to early use. Enable first built-in PMT counter: CWF c1e residency Refuse to run on unsupported platforms without --force, to encourage updating to a version that supports the system, and to avoid no-so-useful measurement results. Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 364a44a7d7ae..8d5011a0bf60 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -9559,7 +9559,7 @@ int get_and_dump_counters(void) void print_version() { - fprintf(outf, "turbostat version 2025.01.14 - Len Brown \n"); + fprintf(outf, "turbostat version 2025.02.02 - Len Brown \n"); } #define COMMAND_LINE_SIZE 2048 -- 2.51.0 From 2014c95afecee3e76ca4a56956a936e23283f05b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 2 Feb 2025 15:39:26 -0800 Subject: [PATCH 03/16] Linux 6.14-rc1 --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 4117cc79748b..9e0d63d9d94b 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 6 -PATCHLEVEL = 13 +PATCHLEVEL = 14 SUBLEVEL = 0 -EXTRAVERSION = +EXTRAVERSION = -rc1 NAME = Baby Opossum Posse # *DOCUMENTATION* -- 2.51.0 From e4d4648eac8b4ef39f412d07715eb26f1ccd7342 Mon Sep 17 00:00:00 2001 From: Fedor Pchelkin Date: Tue, 28 Jan 2025 00:02:01 +0300 Subject: [PATCH 04/16] platform/x86: ideapad-laptop: pass a correct pointer to the driver data MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit devm_platform_profile_register() expects a pointer to the private driver data but instead an address of the pointer variable is passed due to a typo. This leads to the crashes later: BUG: unable to handle page fault for address: 00000000fe0d0044 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 UID: 0 PID: 1284 Comm: tuned Tainted: G W 6.13.0+ #7 Tainted: [W]=WARN Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023 RIP: 0010:__mutex_lock.constprop.0+0x6bf/0x7f0 Call Trace: dytc_profile_set+0x4a/0x140 [ideapad_laptop] _store_and_notify+0x13/0x40 [platform_profile] class_for_each_device+0x145/0x180 platform_profile_store+0xc0/0x130 [platform_profile] kernfs_fop_write_iter+0x13e/0x1f0 vfs_write+0x290/0x450 ksys_write+0x6c/0xe0 do_syscall_64+0x82/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Found by Linux Verification Center (linuxtesting.org). Fixes: 249c576f0f9d ("ACPI: platform_profile: Let drivers set drvdata to the class device") Signed-off-by: Fedor Pchelkin Reviewed-by: Kurt Borja Link: https://lore.kernel.org/r/20250127210202.568691-1-pchelkin@ispras.ru Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/ideapad-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index dfb5d4b8c046..30bd366d7b58 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -1121,7 +1121,7 @@ static int ideapad_dytc_profile_init(struct ideapad_private *priv) /* Create platform_profile structure and register */ priv->dytc->ppdev = devm_platform_profile_register(&priv->platform_device->dev, - "ideapad-laptop", &priv->dytc, + "ideapad-laptop", priv->dytc, &dytc_profile_ops); if (IS_ERR(priv->dytc->ppdev)) { err = PTR_ERR(priv->dytc->ppdev); -- 2.51.0 From 583ef25bb2a094813351a727ddec38b35a15b9f8 Mon Sep 17 00:00:00 2001 From: Dmitry Kandybka Date: Fri, 24 Jan 2025 01:07:39 +0300 Subject: [PATCH 05/16] platform/x86/intel: pmc: fix ltr decode in pmc_core_ltr_show() MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit In pmc_core_ltr_show(), promote 'val' to 'u64' to avoid possible integer overflow. Values (10 bit) are multiplied by the scale, the result of expression is in a range from 1 to 34,326,183,936 which is bigger then UINT32_MAX. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Kandybka Reviewed-by: Rajneesh Bhardwaj Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20250123220739.68087-1-d.kandybka@gmail.com Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/pmc/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/intel/pmc/core.c b/drivers/platform/x86/intel/pmc/core.c index 10f04b944117..1ee0fb5f8250 100644 --- a/drivers/platform/x86/intel/pmc/core.c +++ b/drivers/platform/x86/intel/pmc/core.c @@ -626,8 +626,8 @@ static u32 convert_ltr_scale(u32 val) static int pmc_core_ltr_show(struct seq_file *s, void *unused) { struct pmc_dev *pmcdev = s->private; - u64 decoded_snoop_ltr, decoded_non_snoop_ltr; - u32 ltr_raw_data, scale, val; + u64 decoded_snoop_ltr, decoded_non_snoop_ltr, val; + u32 ltr_raw_data, scale; u16 snoop_ltr, nonsnoop_ltr; unsigned int i, index, ltr_index = 0; -- 2.51.0 From a787ab73e2e43c0a3df10bc8d9b9b7a679129d49 Mon Sep 17 00:00:00 2001 From: Jithu Joseph Date: Fri, 31 Jan 2025 12:53:15 -0800 Subject: [PATCH 06/16] platform/x86/intel/ifs: Update documentation with image download path MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The documentation previously listed the path to download In Field Scan (IFS) test images as "TBD". Update the documentation to include the correct image download location. Also move the download link to the appropriate section within the documentation. Reported-by: Anisse Astier Signed-off-by: Jithu Joseph Link: https://lore.kernel.org/r/20250131205315.1585663-1-jithu.joseph@intel.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/ifs/ifs.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/platform/x86/intel/ifs/ifs.h b/drivers/platform/x86/intel/ifs/ifs.h index 5c3c0dfa1bf8..f369fb0d3d82 100644 --- a/drivers/platform/x86/intel/ifs/ifs.h +++ b/drivers/platform/x86/intel/ifs/ifs.h @@ -23,12 +23,14 @@ * IFS Image * --------- * - * Intel provides a firmware file containing the scan tests via - * github [#f1]_. Similar to microcode there is a separate file for each + * Intel provides firmware files containing the scan tests via the webpage [#f1]_. + * Look under "In-Field Scan Test Images Download" section towards the + * end of the page. Similar to microcode, there are separate files for each * family-model-stepping. IFS Images are not applicable for some test types. * Wherever applicable the sysfs directory would provide a "current_batch" file * (see below) for loading the image. * + * .. [#f1] https://intel.com/InFieldScan * * IFS Image Loading * ----------------- @@ -125,9 +127,6 @@ * 2) Hardware allows for some number of cores to be tested in parallel. * The driver does not make use of this, it only tests one core at a time. * - * .. [#f1] https://github.com/intel/TBD - * - * * Structural Based Functional Test at Field (SBAF): * ------------------------------------------------- * -- 2.51.0 From 1046cac109225eda0973b898e053aeb3d6c10e1d Mon Sep 17 00:00:00 2001 From: Sybil Isabel Dorsett Date: Mon, 3 Feb 2025 16:33:15 +0000 Subject: [PATCH 07/16] platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit On ThinkPad X120e, fan speed is reported in ticks per revolution rather than RPM. Recalculate the fan speed value reported for ThinkPad X120e to RPM based on a 22.5 kHz clock. Based on the information on https://www.thinkwiki.org/wiki/How_to_control_fan_speed, the same problem is highly likely to be relevant to at least Edge11, but Edge11 is not addressed in this patch. Signed-off-by: Sybil Isabel Dorsett Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20250203163255.5525-1-sybdorsett@proton.me Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/thinkpad_acpi.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 1fcb0f99695a..e7778ea41478 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -7885,6 +7885,7 @@ static struct ibm_struct volume_driver_data = { #define FAN_NS_CTRL_STATUS BIT(2) /* Bit which determines control is enabled or not */ #define FAN_NS_CTRL BIT(4) /* Bit which determines control is by host or EC */ +#define FAN_CLOCK_TPM (22500*60) /* Ticks per minute for a 22.5 kHz clock */ enum { /* Fan control constants */ fan_status_offset = 0x2f, /* EC register 0x2f */ @@ -7940,6 +7941,7 @@ static int fan_watchdog_maxinterval; static bool fan_with_ns_addr; static bool ecfw_with_fan_dec_rpm; +static bool fan_speed_in_tpr; static struct mutex fan_mutex; @@ -8142,8 +8144,11 @@ static int fan_get_speed(unsigned int *speed) !acpi_ec_read(fan_rpm_offset + 1, &hi))) return -EIO; - if (likely(speed)) + if (likely(speed)) { *speed = (hi << 8) | lo; + if (fan_speed_in_tpr && *speed != 0) + *speed = FAN_CLOCK_TPM / *speed; + } break; case TPACPI_FAN_RD_TPEC_NS: if (!acpi_ec_read(fan_rpm_status_ns, &lo)) @@ -8176,8 +8181,11 @@ static int fan2_get_speed(unsigned int *speed) if (rc) return -EIO; - if (likely(speed)) + if (likely(speed)) { *speed = (hi << 8) | lo; + if (fan_speed_in_tpr && *speed != 0) + *speed = FAN_CLOCK_TPM / *speed; + } break; case TPACPI_FAN_RD_TPEC_NS: @@ -8788,6 +8796,7 @@ static const struct attribute_group fan_driver_attr_group = { #define TPACPI_FAN_NOFAN 0x0008 /* no fan available */ #define TPACPI_FAN_NS 0x0010 /* For EC with non-Standard register addresses */ #define TPACPI_FAN_DECRPM 0x0020 /* For ECFW's with RPM in register as decimal */ +#define TPACPI_FAN_TPR 0x0040 /* Fan speed is in Ticks Per Revolution */ static const struct tpacpi_quirk fan_quirk_table[] __initconst = { TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1), @@ -8817,6 +8826,7 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = { TPACPI_Q_LNV3('R', '0', 'V', TPACPI_FAN_NS), /* 11e Gen5 KL-Y */ TPACPI_Q_LNV3('N', '1', 'O', TPACPI_FAN_NOFAN), /* X1 Tablet (2nd gen) */ TPACPI_Q_LNV3('R', '0', 'Q', TPACPI_FAN_DECRPM),/* L480 */ + TPACPI_Q_LNV('8', 'F', TPACPI_FAN_TPR), /* ThinkPad x120e */ }; static int __init fan_init(struct ibm_init_struct *iibm) @@ -8887,6 +8897,8 @@ static int __init fan_init(struct ibm_init_struct *iibm) if (quirks & TPACPI_FAN_Q1) fan_quirk1_setup(); + if (quirks & TPACPI_FAN_TPR) + fan_speed_in_tpr = true; /* Try and probe the 2nd fan */ tp_features.second_fan = 1; /* needed for get_speed to work */ res = fan2_get_speed(&speed); -- 2.51.0 From 9cff907cbf8c7fb5345918dbcc7b74a01656f34f Mon Sep 17 00:00:00 2001 From: Mark Pearson Date: Thu, 6 Feb 2025 14:39:41 -0500 Subject: [PATCH 08/16] platform/x86: thinkpad_acpi: Support for V9 DYTC platform profiles MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Newer Thinkpad AMD platforms are using V9 DYTC and this changes the profiles used for PSC mode. Add support for this update. Tested on P14s G5 AMD Signed-off-by: Mark Pearson Link: https://lore.kernel.org/r/20250206193953.58365-1-mpearson-lenovo@squebb.ca Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/thinkpad_acpi.c | 34 ++++++++++++++++++---------- 1 file changed, 22 insertions(+), 12 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index e7778ea41478..99cdea723d32 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -10331,6 +10331,10 @@ static struct ibm_struct proxsensor_driver_data = { #define DYTC_MODE_PSC_BALANCE 5 /* Default mode aka balanced */ #define DYTC_MODE_PSC_PERFORM 7 /* High power mode aka performance */ +#define DYTC_MODE_PSCV9_LOWPOWER 1 /* Low power mode */ +#define DYTC_MODE_PSCV9_BALANCE 3 /* Default mode aka balanced */ +#define DYTC_MODE_PSCV9_PERFORM 4 /* High power mode aka performance */ + #define DYTC_ERR_MASK 0xF /* Bits 0-3 in cmd result are the error result */ #define DYTC_ERR_SUCCESS 1 /* CMD completed successful */ @@ -10351,6 +10355,10 @@ static int dytc_capabilities; static bool dytc_mmc_get_available; static int profile_force; +static int platform_psc_profile_lowpower = DYTC_MODE_PSC_LOWPOWER; +static int platform_psc_profile_balanced = DYTC_MODE_PSC_BALANCE; +static int platform_psc_profile_performance = DYTC_MODE_PSC_PERFORM; + static int convert_dytc_to_profile(int funcmode, int dytcmode, enum platform_profile_option *profile) { @@ -10372,19 +10380,15 @@ static int convert_dytc_to_profile(int funcmode, int dytcmode, } return 0; case DYTC_FUNCTION_PSC: - switch (dytcmode) { - case DYTC_MODE_PSC_LOWPOWER: + if (dytcmode == platform_psc_profile_lowpower) *profile = PLATFORM_PROFILE_LOW_POWER; - break; - case DYTC_MODE_PSC_BALANCE: + else if (dytcmode == platform_psc_profile_balanced) *profile = PLATFORM_PROFILE_BALANCED; - break; - case DYTC_MODE_PSC_PERFORM: + else if (dytcmode == platform_psc_profile_performance) *profile = PLATFORM_PROFILE_PERFORMANCE; - break; - default: /* Unknown mode */ + else return -EINVAL; - } + return 0; case DYTC_FUNCTION_AMT: /* For now return balanced. It's the closest we have to 'auto' */ @@ -10405,19 +10409,19 @@ static int convert_profile_to_dytc(enum platform_profile_option profile, int *pe if (dytc_capabilities & BIT(DYTC_FC_MMC)) *perfmode = DYTC_MODE_MMC_LOWPOWER; else if (dytc_capabilities & BIT(DYTC_FC_PSC)) - *perfmode = DYTC_MODE_PSC_LOWPOWER; + *perfmode = platform_psc_profile_lowpower; break; case PLATFORM_PROFILE_BALANCED: if (dytc_capabilities & BIT(DYTC_FC_MMC)) *perfmode = DYTC_MODE_MMC_BALANCE; else if (dytc_capabilities & BIT(DYTC_FC_PSC)) - *perfmode = DYTC_MODE_PSC_BALANCE; + *perfmode = platform_psc_profile_balanced; break; case PLATFORM_PROFILE_PERFORMANCE: if (dytc_capabilities & BIT(DYTC_FC_MMC)) *perfmode = DYTC_MODE_MMC_PERFORM; else if (dytc_capabilities & BIT(DYTC_FC_PSC)) - *perfmode = DYTC_MODE_PSC_PERFORM; + *perfmode = platform_psc_profile_performance; break; default: /* Unknown profile */ return -EOPNOTSUPP; @@ -10611,6 +10615,7 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm) if (output & BIT(DYTC_QUERY_ENABLE_BIT)) dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF; + dbg_printk(TPACPI_DBG_INIT, "DYTC version %d\n", dytc_version); /* Check DYTC is enabled and supports mode setting */ if (dytc_version < 5) return -ENODEV; @@ -10649,6 +10654,11 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm) } } else if (dytc_capabilities & BIT(DYTC_FC_PSC)) { /* PSC MODE */ pr_debug("PSC is supported\n"); + if (dytc_version >= 9) { /* update profiles for DYTC 9 and up */ + platform_psc_profile_lowpower = DYTC_MODE_PSCV9_LOWPOWER; + platform_psc_profile_balanced = DYTC_MODE_PSCV9_BALANCE; + platform_psc_profile_performance = DYTC_MODE_PSCV9_PERFORM; + } } else { dbg_printk(TPACPI_DBG_INIT, "No DYTC support available\n"); return -ENODEV; -- 2.51.0 From fc22b06fbd2afefa1eddff69a6fd30c539cef577 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Tue, 11 Feb 2025 09:28:39 +0200 Subject: [PATCH 09/16] platform/x86: int3472: Use correct type for "polarity", call it gpio_flags MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Struct gpiod_lookup flags field's type is unsigned long. Thus use unsigned long for values to be assigned to that field. Similarly, also call the field gpio_flags which it really is. Signed-off-by: Sakari Ailus Reviewed-by: Hans de Goede Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20250211072841.7713-2-sakari.ailus@linux.intel.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/int3472/discrete.c | 39 ++++++++++--------- 1 file changed, 20 insertions(+), 19 deletions(-) diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c index 31015ebe20d8..b891b064fbf7 100644 --- a/drivers/platform/x86/intel/int3472/discrete.c +++ b/drivers/platform/x86/intel/int3472/discrete.c @@ -55,7 +55,7 @@ static void skl_int3472_log_sensor_module_name(struct int3472_discrete_device *i static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry, struct acpi_resource_gpio *agpio, - const char *func, u32 polarity) + const char *func, unsigned long gpio_flags) { char *path = agpio->resource_source.string_ptr; struct acpi_device *adev; @@ -70,14 +70,14 @@ static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry, if (!adev) return -ENODEV; - *table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], func, polarity); + *table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], func, gpio_flags); return 0; } static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472, struct acpi_resource_gpio *agpio, - const char *func, u32 polarity) + const char *func, unsigned long gpio_flags) { int ret; @@ -87,7 +87,7 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347 } ret = skl_int3472_fill_gpiod_lookup(&int3472->gpios.table[int3472->n_sensor_gpios], - agpio, func, polarity); + agpio, func, gpio_flags); if (ret) return ret; @@ -100,7 +100,7 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347 static struct gpio_desc * skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472, struct acpi_resource_gpio *agpio, - const char *func, u32 polarity) + const char *func, unsigned long gpio_flags) { struct gpio_desc *desc; int ret; @@ -111,7 +111,7 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472, return ERR_PTR(-ENOMEM); lookup->dev_id = dev_name(int3472->dev); - ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, func, polarity); + ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, func, gpio_flags); if (ret) return ERR_PTR(ret); @@ -122,32 +122,33 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472, return desc; } -static void int3472_get_func_and_polarity(u8 type, const char **func, u32 *polarity) +static void int3472_get_func_and_polarity(u8 type, const char **func, + unsigned long *gpio_flags) { switch (type) { case INT3472_GPIO_TYPE_RESET: *func = "reset"; - *polarity = GPIO_ACTIVE_LOW; + *gpio_flags = GPIO_ACTIVE_LOW; break; case INT3472_GPIO_TYPE_POWERDOWN: *func = "powerdown"; - *polarity = GPIO_ACTIVE_LOW; + *gpio_flags = GPIO_ACTIVE_LOW; break; case INT3472_GPIO_TYPE_CLK_ENABLE: *func = "clk-enable"; - *polarity = GPIO_ACTIVE_HIGH; + *gpio_flags = GPIO_ACTIVE_HIGH; break; case INT3472_GPIO_TYPE_PRIVACY_LED: *func = "privacy-led"; - *polarity = GPIO_ACTIVE_HIGH; + *gpio_flags = GPIO_ACTIVE_HIGH; break; case INT3472_GPIO_TYPE_POWER_ENABLE: *func = "power-enable"; - *polarity = GPIO_ACTIVE_HIGH; + *gpio_flags = GPIO_ACTIVE_HIGH; break; default: *func = "unknown"; - *polarity = GPIO_ACTIVE_HIGH; + *gpio_flags = GPIO_ACTIVE_HIGH; break; } } @@ -194,7 +195,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, struct gpio_desc *gpio; const char *err_msg; const char *func; - u32 polarity; + unsigned long gpio_flags; int ret; if (!acpi_gpio_get_io_resource(ares, &agpio)) @@ -217,7 +218,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, type = FIELD_GET(INT3472_GPIO_DSM_TYPE, obj->integer.value); - int3472_get_func_and_polarity(type, &func, &polarity); + int3472_get_func_and_polarity(type, &func, &gpio_flags); pin = FIELD_GET(INT3472_GPIO_DSM_PIN, obj->integer.value); /* Pin field is not really used under Windows and wraps around at 8 bits */ @@ -227,16 +228,16 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, active_value = FIELD_GET(INT3472_GPIO_DSM_SENSOR_ON_VAL, obj->integer.value); if (!active_value) - polarity ^= GPIO_ACTIVE_LOW; + gpio_flags ^= GPIO_ACTIVE_LOW; dev_dbg(int3472->dev, "%s %s pin %d active-%s\n", func, agpio->resource_source.string_ptr, agpio->pin_table[0], - str_high_low(polarity == GPIO_ACTIVE_HIGH)); + str_high_low(gpio_flags == GPIO_ACTIVE_HIGH)); switch (type) { case INT3472_GPIO_TYPE_RESET: case INT3472_GPIO_TYPE_POWERDOWN: - ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, func, polarity); + ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, func, gpio_flags); if (ret) err_msg = "Failed to map GPIO pin to sensor\n"; @@ -244,7 +245,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, case INT3472_GPIO_TYPE_CLK_ENABLE: case INT3472_GPIO_TYPE_PRIVACY_LED: case INT3472_GPIO_TYPE_POWER_ENABLE: - gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, func, polarity); + gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, func, gpio_flags); if (IS_ERR(gpio)) { ret = PTR_ERR(gpio); err_msg = "Failed to get GPIO\n"; -- 2.51.0 From 569617dbbd06286fb73f3f1c2ac91e51d863c7de Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Tue, 11 Feb 2025 09:28:40 +0200 Subject: [PATCH 10/16] platform/x86: int3472: Call "reset" GPIO "enable" for INT347E MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The DT bindings for ov7251 specify "enable" GPIO (xshutdown in documentation) but the int3472 indiscriminately provides this as a "reset" GPIO to sensor drivers. Take this into account by assigning it as "enable" with active high polarity for INT347E devices, i.e. ov7251. "reset" with active low polarity remains the default GPIO name for other devices. Signed-off-by: Sakari Ailus Reviewed-by: Hans de Goede Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20250211072841.7713-3-sakari.ailus@linux.intel.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/int3472/discrete.c | 52 +++++++++++++++++-- 1 file changed, 48 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c index b891b064fbf7..092252eb95a8 100644 --- a/drivers/platform/x86/intel/int3472/discrete.c +++ b/drivers/platform/x86/intel/int3472/discrete.c @@ -2,6 +2,7 @@ /* Author: Dan Scally */ #include +#include #include #include #include @@ -122,10 +123,53 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472, return desc; } -static void int3472_get_func_and_polarity(u8 type, const char **func, - unsigned long *gpio_flags) +/** + * struct int3472_gpio_map - Map GPIOs to whatever is expected by the + * sensor driver (as in DT bindings) + * @hid: The ACPI HID of the device without the instance number e.g. INT347E + * @type_from: The GPIO type from ACPI ?SDT + * @type_to: The assigned GPIO type, typically same as @type_from + * @func: The function, e.g. "enable" + * @polarity_low: GPIO_ACTIVE_LOW true if the @polarity_low is true, + * GPIO_ACTIVE_HIGH otherwise + */ +struct int3472_gpio_map { + const char *hid; + u8 type_from; + u8 type_to; + bool polarity_low; + const char *func; +}; + +static const struct int3472_gpio_map int3472_gpio_map[] = { + { "INT347E", INT3472_GPIO_TYPE_RESET, INT3472_GPIO_TYPE_RESET, false, "enable" }, +}; + +static void int3472_get_func_and_polarity(struct acpi_device *adev, u8 *type, + const char **func, unsigned long *gpio_flags) { - switch (type) { + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(int3472_gpio_map); i++) { + /* + * Map the firmware-provided GPIO to whatever a driver expects + * (as in DT bindings). First check if the type matches with the + * GPIO map, then further check that the device _HID matches. + */ + if (*type != int3472_gpio_map[i].type_from) + continue; + + if (!acpi_dev_hid_uid_match(adev, int3472_gpio_map[i].hid, NULL)) + continue; + + *type = int3472_gpio_map[i].type_to; + *gpio_flags = int3472_gpio_map[i].polarity_low ? + GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH; + *func = int3472_gpio_map[i].func; + return; + } + + switch (*type) { case INT3472_GPIO_TYPE_RESET: *func = "reset"; *gpio_flags = GPIO_ACTIVE_LOW; @@ -218,7 +262,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, type = FIELD_GET(INT3472_GPIO_DSM_TYPE, obj->integer.value); - int3472_get_func_and_polarity(type, &func, &gpio_flags); + int3472_get_func_and_polarity(int3472->sensor, &type, &func, &gpio_flags); pin = FIELD_GET(INT3472_GPIO_DSM_PIN, obj->integer.value); /* Pin field is not really used under Windows and wraps around at 8 bits */ -- 2.51.0 From b3e127dacad60a384c92baafdc74f1508bf7dd47 Mon Sep 17 00:00:00 2001 From: Mark Pearson Date: Tue, 11 Feb 2025 12:36:11 -0500 Subject: [PATCH 11/16] platform/x86: thinkpad_acpi: Fix registration of tpacpi platform driver MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The recent platform profile changes prevent the tpacpi platform driver from registering. This error is seen in the kernel logs, and the various tpacpi entries are not created: [ 7550.642171] platform thinkpad_acpi: Resources present before probing This happens because devm_platform_profile_register() is called before tpacpi_pdev probes (thanks to Kurt Borja for identifying the root cause). For now revert back to the old platform_profile_register to fix the issue. This is quick fix and will be re-implemented later as more testing is needed for full solution. Tested on X1 Carbon G12. Fixes: 31658c916fa6 ("platform/x86: thinkpad_acpi: Use devm_platform_profile_register()") Signed-off-by: Mark Pearson Reviewed-by: Kurt Borja Link: https://lore.kernel.org/r/20250211173620.16522-1-mpearson-lenovo@squebb.ca Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/thinkpad_acpi.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 99cdea723d32..72a10ed2017c 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -10668,8 +10668,8 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm) "DYTC version %d: thermal mode available\n", dytc_version); /* Create platform_profile structure and register */ - tpacpi_pprof = devm_platform_profile_register(&tpacpi_pdev->dev, "thinkpad-acpi", - NULL, &dytc_profile_ops); + tpacpi_pprof = platform_profile_register(&tpacpi_pdev->dev, "thinkpad-acpi-profile", + NULL, &dytc_profile_ops); /* * If for some reason platform_profiles aren't enabled * don't quit terminally. @@ -10687,8 +10687,15 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm) return 0; } +static void dytc_profile_exit(void) +{ + if (!IS_ERR_OR_NULL(tpacpi_pprof)) + platform_profile_remove(tpacpi_pprof); +} + static struct ibm_struct dytc_profile_driver_data = { .name = "dytc-profile", + .exit = dytc_profile_exit, }; /************************************************************************* -- 2.51.0 From 1be4e29e94a6be77de3bc210820b74f40814f17a Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Thu, 27 Feb 2025 11:03:06 -0600 Subject: [PATCH 12/16] platform/x86/amd/pmf: Initialize and clean up `cb_mutex` MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit `cb_mutex` was introduced in commit 9e0894d07072e ("platform/x86/amd/pmf: Enable Custom BIOS Inputs for PMF-TA") to prevent conccurrent access for BIOS inputs. It however isn't initialized and so on use it may lead to a NULL pointer dereference. Add code to initialize on probe and clean up on destroy. Reported-by: Yijun Shen Cc: Richard Gong Fixes: 9e0894d07072e ("platform/x86/amd/pmf: Enable Custom BIOS Inputs for PMF-TA") Signed-off-by: Mario Limonciello Tested-By: Yijun Shen Acked-by: Shyam Sundar S K Link: https://lore.kernel.org/r/20250227170308.435862-1-superm1@kernel.org Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/amd/pmf/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/platform/x86/amd/pmf/core.c b/drivers/platform/x86/amd/pmf/core.c index 764cc1fe90ae..a2cb2d5544f5 100644 --- a/drivers/platform/x86/amd/pmf/core.c +++ b/drivers/platform/x86/amd/pmf/core.c @@ -452,6 +452,7 @@ static int amd_pmf_probe(struct platform_device *pdev) mutex_init(&dev->lock); mutex_init(&dev->update_mutex); + mutex_init(&dev->cb_mutex); apmf_acpi_init(dev); platform_set_drvdata(pdev, dev); @@ -477,6 +478,7 @@ static void amd_pmf_remove(struct platform_device *pdev) amd_pmf_dbgfs_unregister(dev); mutex_destroy(&dev->lock); mutex_destroy(&dev->update_mutex); + mutex_destroy(&dev->cb_mutex); kfree(dev->buf); } -- 2.51.0 From 2738d06fb4f01145b24c542fb06de538ffc56430 Mon Sep 17 00:00:00 2001 From: Dmitry Panchenko Date: Thu, 20 Feb 2025 17:39:31 +0200 Subject: [PATCH 13/16] platform/x86: intel-hid: fix volume buttons on Microsoft Surface Go 4 tablet MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Volume buttons on Microsoft Surface Go 4 tablet didn't send any events. Add Surface Go 4 DMI match to button_array_table to fix this. Signed-off-by: Dmitry Panchenko Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20250220154016.3620917-1-dmitry@d-systems.ee Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/hid.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/platform/x86/intel/hid.c b/drivers/platform/x86/intel/hid.c index 927a2993f616..88a1a9ff2f34 100644 --- a/drivers/platform/x86/intel/hid.c +++ b/drivers/platform/x86/intel/hid.c @@ -139,6 +139,13 @@ static const struct dmi_system_id button_array_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"), }, }, + { + .ident = "Microsoft Surface Go 4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Surface Go 4"), + }, + }, { } }; -- 2.51.0 From d0d10eaedcb53740883d7e5d53c5e15c879b48fb Mon Sep 17 00:00:00 2001 From: Mingcong Bai Date: Sat, 22 Feb 2025 00:48:24 +0800 Subject: [PATCH 14/16] platform/x86: thinkpad_acpi: Add battery quirk for ThinkPad X131e MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Based on the dmesg messages from the original reporter: [ 4.964073] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error [ 4.964083] thinkpad_acpi: Error probing battery 2 Lenovo ThinkPad X131e also needs this battery quirk. Reported-by: Fan Yang <804284660@qq.com> Tested-by: Fan Yang <804284660@qq.com> Co-developed-by: Xi Ruoyao Signed-off-by: Xi Ruoyao Signed-off-by: Mingcong Bai Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250221164825.77315-1-jeffbai@aosc.io Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/thinkpad_acpi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 72a10ed2017c..1cc91173e012 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -9972,6 +9972,7 @@ static const struct tpacpi_quirk battery_quirk_table[] __initconst = { * Individual addressing is broken on models that expose the * primary battery as BAT1. */ + TPACPI_Q_LNV('G', '8', true), /* ThinkPad X131e */ TPACPI_Q_LNV('8', 'F', true), /* Thinkpad X120e */ TPACPI_Q_LNV('J', '7', true), /* B5400 */ TPACPI_Q_LNV('J', 'I', true), /* Thinkpad 11e */ -- 2.51.0 From f317f38e7fbb15a0d8329289fef8cf034938fb4f Mon Sep 17 00:00:00 2001 From: "David E. Box" Date: Wed, 26 Feb 2025 13:47:27 -0800 Subject: [PATCH 15/16] platform/x86/intel/vsec: Add Diamond Rapids support MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Add PCI ID for the Diamond Rapids Platforms Signed-off-by: David E. Box Link: https://lore.kernel.org/r/20250226214728.1256747-1-david.e.box@linux.intel.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/vsec.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/platform/x86/intel/vsec.c b/drivers/platform/x86/intel/vsec.c index 8272f1dd0fbc..db3c031d1757 100644 --- a/drivers/platform/x86/intel/vsec.c +++ b/drivers/platform/x86/intel/vsec.c @@ -404,6 +404,11 @@ static const struct intel_vsec_platform_info oobmsm_info = { .caps = VSEC_CAP_TELEMETRY | VSEC_CAP_SDSI | VSEC_CAP_TPMI, }; +/* DMR OOBMSM info */ +static const struct intel_vsec_platform_info dmr_oobmsm_info = { + .caps = VSEC_CAP_TELEMETRY | VSEC_CAP_TPMI, +}; + /* TGL info */ static const struct intel_vsec_platform_info tgl_info = { .caps = VSEC_CAP_TELEMETRY, @@ -420,6 +425,7 @@ static const struct intel_vsec_platform_info lnl_info = { #define PCI_DEVICE_ID_INTEL_VSEC_MTL_M 0x7d0d #define PCI_DEVICE_ID_INTEL_VSEC_MTL_S 0xad0d #define PCI_DEVICE_ID_INTEL_VSEC_OOBMSM 0x09a7 +#define PCI_DEVICE_ID_INTEL_VSEC_OOBMSM_DMR 0x09a1 #define PCI_DEVICE_ID_INTEL_VSEC_RPL 0xa77d #define PCI_DEVICE_ID_INTEL_VSEC_TGL 0x9a0d #define PCI_DEVICE_ID_INTEL_VSEC_LNL_M 0x647d @@ -430,6 +436,7 @@ static const struct pci_device_id intel_vsec_pci_ids[] = { { PCI_DEVICE_DATA(INTEL, VSEC_MTL_M, &mtl_info) }, { PCI_DEVICE_DATA(INTEL, VSEC_MTL_S, &mtl_info) }, { PCI_DEVICE_DATA(INTEL, VSEC_OOBMSM, &oobmsm_info) }, + { PCI_DEVICE_DATA(INTEL, VSEC_OOBMSM_DMR, &dmr_oobmsm_info) }, { PCI_DEVICE_DATA(INTEL, VSEC_RPL, &tgl_info) }, { PCI_DEVICE_DATA(INTEL, VSEC_TGL, &tgl_info) }, { PCI_DEVICE_DATA(INTEL, VSEC_LNL_M, &lnl_info) }, -- 2.51.0 From 9ba93cb8212d62bccd8b41b8adb6656abf37280a Mon Sep 17 00:00:00 2001 From: Shyam Sundar S K Date: Wed, 5 Mar 2025 10:28:41 +0530 Subject: [PATCH 16/16] platform/x86/amd/pmf: Propagate PMF-TA return codes MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit In the amd_pmf_invoke_cmd_init() function within the PMF driver ensure that the actual result from the PMF-TA is returned rather than a generic EIO. This change allows for proper handling of errors originating from the PMF-TA. Reviewed-by: Mario Limonciello Co-developed-by: Patil Rajesh Reddy Signed-off-by: Patil Rajesh Reddy Signed-off-by: Shyam Sundar S K Link: https://lore.kernel.org/r/20250305045842.4117767-1-Shyam-sundar.S-k@amd.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/amd/pmf/tee-if.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c index 8c88769ea1d8..b404764550c4 100644 --- a/drivers/platform/x86/amd/pmf/tee-if.c +++ b/drivers/platform/x86/amd/pmf/tee-if.c @@ -323,7 +323,7 @@ static int amd_pmf_start_policy_engine(struct amd_pmf_dev *dev) } else { dev_err(dev->dev, "ta invoke cmd init failed err: %x\n", res); dev->smart_pc_enabled = false; - return -EIO; + return res; } return 0; -- 2.51.0