From fd64dda48f7e3f67ada1e1fe47e784ab350da72e Mon Sep 17 00:00:00 2001 From: Pratyush Yadav Date: Fri, 23 Feb 2024 13:53:01 +0530 Subject: [PATCH] media: cadence: csi2rx: configure DPHY before starting source stream When the source device is operating above 1.5 Gbps per lane, it needs to send the Skew Calibration Sequence before sending any HS data. If the DPHY is initialized after the source stream is started, then it might miss the sequence and not be able to receive data properly. Move the start of source subdev to the end of the sequence to make sure everything is ready to receive data before the source starts streaming. Signed-off-by: Pratyush Yadav Fixes: 3295cf1241d3 ("media: cadence: Add support for external dphy") Tested-by: Julien Massot Tested-by: Changhuang Liang Reviewed-by: Julien Massot Reviewed-by: Changhuang Liang Signed-off-by: Jai Luthra Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil --- drivers/media/platform/cadence/cdns-csi2rx.c | 26 +++++++++++--------- 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c index 2d7b0508cc9af..6f7d27a48eff0 100644 --- a/drivers/media/platform/cadence/cdns-csi2rx.c +++ b/drivers/media/platform/cadence/cdns-csi2rx.c @@ -239,10 +239,6 @@ static int csi2rx_start(struct csi2rx_priv *csi2rx) writel(reg, csi2rx->base + CSI2RX_STATIC_CFG_REG); - ret = v4l2_subdev_call(csi2rx->source_subdev, video, s_stream, true); - if (ret) - goto err_disable_pclk; - /* Enable DPHY clk and data lanes. */ if (csi2rx->dphy) { reg = CSI2RX_DPHY_CL_EN | CSI2RX_DPHY_CL_RST; @@ -252,6 +248,13 @@ static int csi2rx_start(struct csi2rx_priv *csi2rx) } writel(reg, csi2rx->base + CSI2RX_DPHY_LANE_CTRL_REG); + + ret = csi2rx_configure_ext_dphy(csi2rx); + if (ret) { + dev_err(csi2rx->dev, + "Failed to configure external DPHY: %d\n", ret); + goto err_disable_pclk; + } } /* @@ -291,14 +294,9 @@ static int csi2rx_start(struct csi2rx_priv *csi2rx) reset_control_deassert(csi2rx->sys_rst); - if (csi2rx->dphy) { - ret = csi2rx_configure_ext_dphy(csi2rx); - if (ret) { - dev_err(csi2rx->dev, - "Failed to configure external DPHY: %d\n", ret); - goto err_disable_sysclk; - } - } + ret = v4l2_subdev_call(csi2rx->source_subdev, video, s_stream, true); + if (ret) + goto err_disable_sysclk; clk_disable_unprepare(csi2rx->p_clk); @@ -312,6 +310,10 @@ err_disable_pixclk: clk_disable_unprepare(csi2rx->pixel_clk[i - 1]); } + if (csi2rx->dphy) { + writel(0, csi2rx->base + CSI2RX_DPHY_LANE_CTRL_REG); + phy_power_off(csi2rx->dphy); + } err_disable_pclk: clk_disable_unprepare(csi2rx->p_clk); -- 2.49.0