From f9d418552ba1e3a0e92487ff82eb515dab7516c0 Mon Sep 17 00:00:00 2001 From: Suraj Kandpal Date: Mon, 16 Dec 2024 23:45:54 +0530 Subject: [PATCH] drm/i915/cx0_phy: Fix C10 pll programming sequence According to spec VDR_CUSTOM_WIDTH register gets programmed after pll specific VDR registers and TX Lane programming registers are done. Moreover we only program into C10_VDR_CONTROL1 to update config and setup master lane once all VDR registers are written into. Bspec: 67636 Fixes: 51390cc0e00a ("drm/i915/mtl: Add Support for C10 PHY message bus and pll programming") Signed-off-by: Suraj Kandpal Reviewed-by: Ankit Nautiyal Link: https://patchwork.freedesktop.org/patch/msgid/20241216181554.2861381-1-suraj.kandpal@intel.com --- drivers/gpu/drm/i915/display/intel_cx0_phy.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c index 142de06818a7..5ebc90d210d4 100644 --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c @@ -2117,14 +2117,6 @@ static void intel_c10_pll_program(struct intel_display *display, 0, C10_VDR_CTRL_MSGBUS_ACCESS, MB_WRITE_COMMITTED); - /* Custom width needs to be programmed to 0 for both the phy lanes */ - intel_cx0_rmw(encoder, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CUSTOM_WIDTH, - C10_VDR_CUSTOM_WIDTH_MASK, C10_VDR_CUSTOM_WIDTH_8_10, - MB_WRITE_COMMITTED); - intel_cx0_rmw(encoder, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1), - 0, C10_VDR_CTRL_UPDATE_CFG, - MB_WRITE_COMMITTED); - /* Program the pll values only for the master lane */ for (i = 0; i < ARRAY_SIZE(pll_state->pll); i++) intel_cx0_write(encoder, INTEL_CX0_LANE0, PHY_C10_VDR_PLL(i), @@ -2134,6 +2126,10 @@ static void intel_c10_pll_program(struct intel_display *display, intel_cx0_write(encoder, INTEL_CX0_LANE0, PHY_C10_VDR_CMN(0), pll_state->cmn, MB_WRITE_COMMITTED); intel_cx0_write(encoder, INTEL_CX0_LANE0, PHY_C10_VDR_TX(0), pll_state->tx, MB_WRITE_COMMITTED); + /* Custom width needs to be programmed to 0 for both the phy lanes */ + intel_cx0_rmw(encoder, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CUSTOM_WIDTH, + C10_VDR_CUSTOM_WIDTH_MASK, C10_VDR_CUSTOM_WIDTH_8_10, + MB_WRITE_COMMITTED); intel_cx0_rmw(encoder, INTEL_CX0_LANE0, PHY_C10_VDR_CONTROL(1), 0, C10_VDR_CTRL_MASTER_LANE | C10_VDR_CTRL_UPDATE_CFG, MB_WRITE_COMMITTED); -- 2.50.1