From f47eba045e6cb97f9ee154c68dbf7c3c756919aa Mon Sep 17 00:00:00 2001 From: Abel Vesa Date: Thu, 12 Dec 2024 19:37:43 +0200 Subject: [PATCH] usb: typec: ucsi: Set orientation as none when connector is unplugged The current implementation of the ucsi glink client connector_status() callback is only relying on the state of the gpio. This means that even when the cable is unplugged, the orientation propagated to the switches along the graph is "orientation normal", instead of "orientation none", which would be the correct one in this case. One of the Qualcomm DP-USB PHY combo drivers, which needs to be aware of the orientation change, is relying on the "orientation none" to skip the reinitialization of the entire PHY. Since the ucsi glink client advertises "orientation normal" even when the cable is unplugged, the mentioned PHY is taken down and reinitialized when in fact it should be left as-is. This triggers a crash within the displayport controller driver in turn, which brings the whole system down on some Qualcomm platforms. Propagating "orientation none" from the ucsi glink client on the connector_status() callback hides the problem of the mentioned PHY driver away for now. But the "orientation none" is nonetheless the correct one to be used in this case. So propagate the "orientation none" instead when the connector status flags says cable is disconnected. Fixes: 76716fd5bf09 ("usb: typec: ucsi: glink: move GPIO reading into connector_status callback") Cc: stable # 6.10 Reviewed-by: Bryan O'Donoghue Reviewed-by: Heikki Krogerus Reviewed-by: Neil Armstrong Signed-off-by: Abel Vesa Reviewed-by: Johan Hovold Tested-by: Johan Hovold Link: https://lore.kernel.org/r/20241212-usb-typec-ucsi-glink-add-orientation-none-v2-1-db5a50498a77@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/ucsi_glink.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c index 90948cd6d297..fed39d458090 100644 --- a/drivers/usb/typec/ucsi/ucsi_glink.c +++ b/drivers/usb/typec/ucsi/ucsi_glink.c @@ -185,6 +185,11 @@ static void pmic_glink_ucsi_connector_status(struct ucsi_connector *con) struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(con->ucsi); int orientation; + if (!UCSI_CONSTAT(con, CONNECTED)) { + typec_set_orientation(con->port, TYPEC_ORIENTATION_NONE); + return; + } + if (con->num > PMIC_GLINK_MAX_PORTS || !ucsi->port_orientation[con->num - 1]) return; -- 2.50.1