From c72ede1c24be689733bcd2233a3a56f2478429c8 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 2 Apr 2025 23:04:46 +0200 Subject: [PATCH] ARM: dts: at91: at91sam9263: fix NAND chip selects NAND did not work on my USB-A9263. I discovered that the offending commit converted the PIO bank for chip selects wrongly, so all A9263 boards need to be fixed. Fixes: 1004a2977bdc ("ARM: dts: at91: Switch to the new NAND bindings") Signed-off-by: Wolfram Sang Reviewed-by: Alexandre Belloni Link: https://lore.kernel.org/r/20250402210446.5972-2-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea --- arch/arm/boot/dts/microchip/at91sam9263ek.dts | 2 +- arch/arm/boot/dts/microchip/tny_a9263.dts | 2 +- arch/arm/boot/dts/microchip/usb_a9263.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/microchip/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts index 471ea25296aa..93c5268a0845 100644 --- a/arch/arm/boot/dts/microchip/at91sam9263ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts @@ -152,7 +152,7 @@ nand@3 { reg = <0x3 0x0 0x800000>; rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/microchip/tny_a9263.dts b/arch/arm/boot/dts/microchip/tny_a9263.dts index 3dd48b3e06da..fd8244b56e05 100644 --- a/arch/arm/boot/dts/microchip/tny_a9263.dts +++ b/arch/arm/boot/dts/microchip/tny_a9263.dts @@ -64,7 +64,7 @@ nand@3 { reg = <0x3 0x0 0x800000>; rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/microchip/usb_a9263.dts b/arch/arm/boot/dts/microchip/usb_a9263.dts index 6af450cb387c..8e1a3fb61087 100644 --- a/arch/arm/boot/dts/microchip/usb_a9263.dts +++ b/arch/arm/boot/dts/microchip/usb_a9263.dts @@ -84,7 +84,7 @@ nand@3 { reg = <0x3 0x0 0x800000>; rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt; -- 2.50.1