From c62f6e2755aa2aa165997f3cdf8a1323e27a5155 Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Mon, 16 Dec 2024 12:07:22 +0800 Subject: [PATCH] ARM: dts: imx6qdl-sabresd: add dr_mode to usbotg Currently there are 3 type of boards (imx6q|imx6qp|imx6dl-sabresd) based on imx6qdl-sabresd.dtsi, they all do not set the dr_mode for usbotg device node. The chipidea usb driver will configure it to otg mode by default if the dr_mode is not set, but some testcases need to parse the dr_mode from DT and decide the follow-up test strategy, here set the dr_mode to otg explicitly for these 3 imx6qdl-sabresd based boards. Signed-off-by: Hui Wang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi index 7fac1d2aa199..960e83f5e904 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi @@ -804,6 +804,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; + dr_mode = "otg"; status = "okay"; }; -- 2.50.1