From bd3f57f45a7029e29e0466e0645ed8b60ddc903a Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw@amazon.co.uk>
Date: Sat, 28 Sep 2024 10:24:59 +0100
Subject: [PATCH] BK7231 IPv6 support, hbridge, and BL0942 fixes

---
 tongou.yaml | 33 ++++++++++++++-------------------
 1 file changed, 14 insertions(+), 19 deletions(-)

diff --git a/tongou.yaml b/tongou.yaml
index eb8fb44..99b578a 100644
--- a/tongou.yaml
+++ b/tongou.yaml
@@ -17,6 +17,12 @@ packages:
 logger:
   level: DEBUG
 
+network:
+  enable_ipv6: true
+
+#syslog:
+#  ip_address: !secret syslog_ip
+
 mqtt:
   on_connect:
     then:
@@ -55,35 +61,24 @@ binary_sensor:
 
 switch:
   - platform: gpio
-    internal: true
-    pin: P24
-    id: relay_on
-    restore_mode: ALWAYS_OFF
-  - platform: gpio
-    internal: true
-    pin: P26
-    id: relay_off
-    restore_mode: ALWAYS_OFF
-  - platform: gpio
+    id: relay_led
     pin:
       number: P9
       inverted: true
+    internal: true
+  - platform: hbridge
+    on_pin: P24
+    off_pin: P26
     id: relay
     name: Relay
     # On by default should be fine as this is not a safety device
     restore_mode: RESTORE_DEFAULT_ON
     on_turn_on:
       then:
-       - switch.turn_off: relay_off
-       - switch.turn_on: relay_on
-       - delay: 100ms
-       - switch.turn_off: relay_on
+        - switch.turn_on: relay_led
     on_turn_off:
       then:
-       - switch.turn_off: relay_on
-       - switch.turn_on: relay_off
-       - delay: 100ms
-       - switch.turn_off: relay_off
+        - switch.turn_off: relay_led
 
 uart:
   id: uart_bus
@@ -101,6 +96,7 @@ sensor:
     line_frequency: 50Hz
     address: 0
     update_interval: 20s
+    reset: false
     current:
       name: ${tongou_name} Current
     voltage:
@@ -113,7 +109,6 @@ sensor:
       name: ${tongou_name} Energy
     frequency:
       name: ${tongou_name} Frequency
-      accuracy_decimals: 2
     voltage_reference: ${voltage_ref}
     current_reference: ${current_ref}
     power_reference: ${power_ref}
-- 
2.49.0