From bb94a157b37ec23f53906a279320f6ed64300eba Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Wed, 31 Jul 2024 13:05:28 +0200 Subject: [PATCH] arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma In commit 91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch on rk3399"), an additional pinctrl state was added whose default pinmux is for 8ch i2s0. However, Puma only has 2ch i2s0. It's been overriding the pinctrl-0 property but the second property override was missed in the aforementioned commit. On Puma, a hardware slider called "BIOS Disable/Normal Boot" can disable eMMC and SPI to force booting from SD card. Another software-controlled GPIO is then configured to override this behavior to make eMMC and SPI available without human intervention. This is currently done in U-Boot and it was enough until the aforementioned commit. Indeed, because of this additional not-yet-overridden property, this software-controlled GPIO is now muxed in a state that does not override this hardware slider anymore, rendering SPI and eMMC flashes unusable. Let's override the property with the 2ch pinmux to fix this. Fixes: 91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch on rk3399") Cc: stable@vger.kernel.org Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20240731-puma-emmc-6-v1-1-4e28eadf32d0@cherry.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index ccbe3a7a1d2c..a782e614d9bb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -409,6 +409,7 @@ &i2s0 { pinctrl-0 = <&i2s0_2ch_bus>; + pinctrl-1 = <&i2s0_2ch_bus_bclk_off>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; status = "okay"; @@ -417,8 +418,8 @@ /* * As Q7 does not specify neither a global nor a RX clock for I2S these * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO. - * Therefore we have to redefine the i2s0_2ch_bus definition to prevent - * conflicts. + * Therefore we have to redefine the i2s0_2ch_bus and i2s0_2ch_bus_bclk_off + * definitions to prevent conflicts. */ &i2s0_2ch_bus { rockchip,pins = @@ -428,6 +429,14 @@ <3 RK_PD7 1 &pcfg_pull_none>; }; +&i2s0_2ch_bus_bclk_off { + rockchip,pins = + <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>; +}; + &io_domains { status = "okay"; bt656-supply = <&vcc_1v8>; -- 2.50.1