From b23285e93bef729e67519a5209d5b7fde3b4af50 Mon Sep 17 00:00:00 2001 From: Da Xue Date: Fri, 25 Apr 2025 15:20:09 -0400 Subject: [PATCH] net: mdio: mux-meson-gxl: set reversed bit when using internal phy This bit is necessary to receive packets from the internal PHY. Without this bit set, no activity occurs on the interface. Normally u-boot sets this bit, but if u-boot is compiled without net support, the interface will be up but without any activity. If bit is set once, it will work until the IP is powered down or reset. The vendor SDK sets this bit along with the PHY_ID bits. Signed-off-by: Da Xue Fixes: 9a24e1ff4326 ("net: mdio: add amlogic gxl mdio mux support") Link: https://patch.msgid.link/20250425192009.1439508-1-da@libre.computer Signed-off-by: Jakub Kicinski --- drivers/net/mdio/mdio-mux-meson-gxl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/mdio/mdio-mux-meson-gxl.c b/drivers/net/mdio/mdio-mux-meson-gxl.c index 00c66240136b..3dd12a8c8b03 100644 --- a/drivers/net/mdio/mdio-mux-meson-gxl.c +++ b/drivers/net/mdio/mdio-mux-meson-gxl.c @@ -17,6 +17,7 @@ #define REG2_LEDACT GENMASK(23, 22) #define REG2_LEDLINK GENMASK(25, 24) #define REG2_DIV4SEL BIT(27) +#define REG2_REVERSED BIT(28) #define REG2_ADCBYPASS BIT(30) #define REG2_CLKINSEL BIT(31) #define ETH_REG3 0x4 @@ -65,7 +66,7 @@ static void gxl_enable_internal_mdio(struct gxl_mdio_mux *priv) * The only constraint is that it must match the one in * drivers/net/phy/meson-gxl.c to properly match the PHY. */ - writel(FIELD_PREP(REG2_PHYID, EPHY_GXL_ID), + writel(REG2_REVERSED | FIELD_PREP(REG2_PHYID, EPHY_GXL_ID), priv->regs + ETH_REG2); /* Enable the internal phy */ -- 2.50.1