From 91a7088096a49eb413ca11a9d80bc8ba60695c18 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Niklas=20S=C3=B6derlund?= Date: Thu, 21 Nov 2024 14:41:05 +0100 Subject: [PATCH] media: dt-bindings: Add property to describe CSI-2 C-PHY line orders MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Each data lane on a CSI-2 C-PHY bus uses three phase encoding and is constructed from three physical wires. The wires are referred to as A, B and C and their default order is ABC. However to ease hardware design the specification allows for the wires to be switched in any order. Add a vendor neutral property to describe the line order used. The property name 'line-orders', the possible values it can be assigned and there names are taken from the MIPI Discovery and Configuration (DisCo) Specification for Imaging. Signed-off-by: Niklas Söderlund Reviewed-by: Rob Herring (Arm) Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- .../bindings/media/video-interfaces.yaml | 21 +++++++++++++++++++ include/dt-bindings/media/video-interfaces.h | 7 +++++++ 2 files changed, 28 insertions(+) diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml index 26e3e7d7c67ba..038e85b45befa 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.yaml +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml @@ -210,6 +210,27 @@ properties: lane-polarities property is omitted, the value must be interpreted as 0 (normal). This property is valid for serial busses only. + line-orders: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + enum: + - 0 # ABC + - 1 # ACB + - 2 # BAC + - 3 # BCA + - 4 # CAB + - 5 # CBA + description: + An array of line orders of the CSI-2 C-PHY data lanes. The order of the + lanes are the same as in data-lanes property. Valid values are 0-5 as + defined in the MIPI Discovery and Configuration (DisCo) Specification for + Imaging. The length of the array must be the same length as the + data-lanes property. If the line-orders property is omitted, the value + shall be interpreted as 0 (ABC). This property is valid for CSI-2 C-PHY + busses only. + strobe: $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 0, 1 ] diff --git a/include/dt-bindings/media/video-interfaces.h b/include/dt-bindings/media/video-interfaces.h index 68ac4e05e37fa..88b9d05d80750 100644 --- a/include/dt-bindings/media/video-interfaces.h +++ b/include/dt-bindings/media/video-interfaces.h @@ -13,4 +13,11 @@ #define MEDIA_BUS_TYPE_PARALLEL 5 #define MEDIA_BUS_TYPE_BT656 6 +#define MEDIA_BUS_CSI2_CPHY_LINE_ORDER_ABC 0 +#define MEDIA_BUS_CSI2_CPHY_LINE_ORDER_ACB 1 +#define MEDIA_BUS_CSI2_CPHY_LINE_ORDER_BAC 2 +#define MEDIA_BUS_CSI2_CPHY_LINE_ORDER_BCA 3 +#define MEDIA_BUS_CSI2_CPHY_LINE_ORDER_CAB 4 +#define MEDIA_BUS_CSI2_CPHY_LINE_ORDER_CBA 5 + #endif /* __DT_BINDINGS_MEDIA_VIDEO_INTERFACES_H__ */ -- 2.50.1