From 8f4c834d89150e9b1c6c3e006668ed6fd9ee2b15 Mon Sep 17 00:00:00 2001 From: Tomasz Maciej Nowak Date: Thu, 22 Aug 2024 20:41:02 +0200 Subject: [PATCH] ARM: tegra: Wire up two front panel LEDs on TrimSlice Pins responsible for controlling these LEDs need to have tristate control removed if we want them as GPIOs. This change aligns with pinmux configuration of "dte" pin group in downstream kernel[1]. These LEDs had no function assigned on vendor kernel and there is no label on the case, the only markings are on PCB which are part of node names (ds1 marking is on power LED controlled by PMIC), so generic term is assigned as the function. 1. https://github.com/compulab/trimslice-android-kernel/blob/upstream/arch/arm/mach-tegra/board-trimslice-pinmux.c#L45 Signed-off-by: Tomasz Maciej Nowak Signed-off-by: Thierry Reding --- .../arm/boot/dts/nvidia/tegra20-trimslice.dts | 30 +++++++++++++++---- 1 file changed, 25 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts b/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts index 7cae6ad57544..4caeeb9f1e1d 100644 --- a/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts @@ -2,6 +2,7 @@ /dts-v1/; #include +#include #include "tegra20.dtsi" #include "tegra20-cpu-opp.dtsi" @@ -201,16 +202,17 @@ conf_ata { nvidia,pins = "ata", "atc", "atd", "ate", "crtp", "dap2", "dap3", "dap4", "dta", - "dtb", "dtc", "dtd", "dte", "gmb", - "gme", "i2cp", "pta", "slxc", "slxd", - "spdi", "spdo", "uda"; + "dtb", "dtc", "dtd", "gmb", "gme", + "i2cp", "pta", "slxc", "slxd", "spdi", + "spdo", "uda"; nvidia,pull = ; nvidia,tristate = ; }; conf_atb { nvidia,pins = "atb", "cdev1", "cdev2", "dap1", - "gma", "gmc", "gmd", "gpu", "gpu7", - "gpv", "sdio1", "slxa", "slxk", "uac"; + "dte", "gma", "gmc", "gmd", "gpu", + "gpu7", "gpv", "sdio1", "slxa", "slxk", + "uac"; nvidia,pull = ; nvidia,tristate = ; }; @@ -408,6 +410,24 @@ }; }; + leds { + compatible = "gpio-leds"; + + led-ds2 { + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_LOW>; + }; + + led-ds3 { + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_LOW>; + }; + }; + poweroff { compatible = "gpio-poweroff"; gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; -- 2.50.1