From 80b1c9aff8ad450839859e4a29559f6bdc481891 Mon Sep 17 00:00:00 2001 From: Shivasharan Nagalikar Date: Fri, 21 Feb 2025 16:33:37 +0530 Subject: [PATCH] tcl/board: Add TI AM261 launchpad config Add basic connection details with AM261 Launchpad. For further details, see https://www.ti.com/tool/LP-AM261 Signed-off-by: Shivasharan Nagalikar Change-Id: Ibf1270a8e470cc6ab5846dc3da64e451a8a769fd Reviewed-on: https://review.openocd.org/c/openocd/+/8793 Reviewed-by: Antonio Borneo Tested-by: jenkins Reviewed-by: Nishanth Menon --- tcl/board/ti_am261_launchpad.cfg | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 tcl/board/ti_am261_launchpad.cfg diff --git a/tcl/board/ti_am261_launchpad.cfg b/tcl/board/ti_am261_launchpad.cfg new file mode 100644 index 000000000..c6c4609ed --- /dev/null +++ b/tcl/board/ti_am261_launchpad.cfg @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/ +# +# Texas Instruments AM261 Launchpad +# https://www.ti.com/tool/LP-AM261 +# + +# AM263 Launchpad has an xds110 onboard. +source [find interface/xds110.cfg] + +transport select jtag + +# default JTAG configuration has only SRST and no TRST +reset_config srst_only srst_push_pull + +# delay after SRST goes inactive +adapter srst delay 20 + +if { ![info exists SOC] } { + set SOC am261 +} + +source [find target/ti_k3.cfg] + +adapter speed 250 -- 2.49.0