From 751e2676ee9272a0fbde6566afde33c1106d7da1 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 6 Mar 2014 14:54:39 +0100 Subject: [PATCH] drm/imx: imx-ldb: add drm_panel support This patch allows to optionally attach the lvds-channel to a panel supported by a drm_panel driver using of-graph bindings, instead of supplying the modes via display-timings in the device tree. This depends on of_graph_get_port_by_id and uses the OF graph to link the optional DRM panel to the LDB lvds-channel. The output port number is 1 on devices without the 4-port input multiplexer (i.MX5) and 4 on devices with the mux (i.MX6). Before: ldb { ... lvds-channel@0 { ... display-timings { native-timing = <&timing1>; timing1: etm0700g0dh6 { hactive = <800>; vactive = <480>; clock-frequency = <33260000>; hsync-len = <128>; hback-porch = <88>; hfront-porch = <40>; vsync-len = <2>; vback-porch = <33>; vfront-porch = <10>; hsync-active = <0>; vsync-active = <0>; ... }; }; ... }; }; After: ldb { ... lvds-channel@0 { ... port@4 { reg = <4>; lvds_out: endpoint { remote_endpoint = <&panel_in>; }; }; }; }; panel { compatible = "edt,etm0700g0dh6", "simple-panel"; ... port { panel_in: endpoint { remote-endpoint = <&lvds_out>; }; }; }; [Fixed build error due to missing select on DRM_PANEL --rmk] Signed-off-by: Russell King Signed-off-by: Philipp Zabel --- .../devicetree/bindings/drm/imx/ldb.txt | 62 +++++++++++++------ drivers/gpu/drm/imx/Kconfig | 1 + drivers/gpu/drm/imx/imx-ldb.c | 48 +++++++++++++- 3 files changed, 90 insertions(+), 21 deletions(-) diff --git a/Documentation/devicetree/bindings/drm/imx/ldb.txt b/Documentation/devicetree/bindings/drm/imx/ldb.txt index 443bcb6134d5..9a21366436f6 100644 --- a/Documentation/devicetree/bindings/drm/imx/ldb.txt +++ b/Documentation/devicetree/bindings/drm/imx/ldb.txt @@ -44,23 +44,30 @@ Optional properties: LVDS Channel ============ -Each LVDS Channel has to contain a display-timings node that describes the -video timings for the connected LVDS display. For detailed information, also -have a look at Documentation/devicetree/bindings/video/display-timing.txt. +Each LVDS Channel has to contain either an of graph link to a panel device node +or a display-timings node that describes the video timings for the connected +LVDS display as well as the fsl,data-mapping and fsl,data-width properties. Required properties: - reg : should be <0> or <1> + - port: Input and output port nodes with endpoint definitions as defined in + Documentation/devicetree/bindings/graph.txt. + On i.MX5, the internal two-input-multiplexer is used. Due to hardware + limitations, only one input port (port@[0,1]) can be used for each channel + (lvds-channel@[0,1], respectively). + On i.MX6, there should be four input ports (port@[0-3]) that correspond + to the four LVDS multiplexer inputs. + A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected + to a panel input port. Optionally, the output port can be left out if + display-timings are used instead. + +Optional properties (required if display-timings are used): + - display-timings : A node that describes the display timings as defined in + Documentation/devicetree/bindings/video/display-timing.txt. - fsl,data-mapping : should be "spwg" or "jeida" This describes how the color bits are laid out in the serialized LVDS signal. - fsl,data-width : should be <18> or <24> - - port: A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - On i.MX5, the internal two-input-multiplexer is used. - Due to hardware limitations, only one port (port@[0,1]) - can be used for each channel (lvds-channel@[0,1], respectively) - On i.MX6, there should be four ports (port@[0-3]) that correspond - to the four LVDS multiplexer inputs. example: @@ -73,23 +80,21 @@ ldb: ldb@53fa8008 { #size-cells = <0>; compatible = "fsl,imx53-ldb"; gpr = <&gpr>; - clocks = <&clks 122>, <&clks 120>, - <&clks 115>, <&clks 116>, - <&clks 123>, <&clks 85>; + clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, + <&clks IMX5_CLK_LDB_DI1_SEL>, + <&clks IMX5_CLK_IPU_DI0_SEL>, + <&clks IMX5_CLK_IPU_DI1_SEL>, + <&clks IMX5_CLK_LDB_DI0_GATE>, + <&clks IMX5_CLK_LDB_DI1_GATE>; clock-names = "di0_pll", "di1_pll", "di0_sel", "di1_sel", "di0", "di1"; + /* Using an of-graph endpoint link to connect the panel */ lvds-channel@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; - fsl,data-mapping = "spwg"; - fsl,data-width = <24>; - - display-timings { - /* ... */ - }; port@0 { reg = <0>; @@ -98,8 +103,17 @@ ldb: ldb@53fa8008 { remote-endpoint = <&ipu_di0_lvds0>; }; }; + + port@2 { + reg = <2>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; + /* Using display-timings and fsl,data-mapping/width instead */ lvds-channel@1 { #address-cells = <1>; #size-cells = <0>; @@ -120,3 +134,13 @@ ldb: ldb@53fa8008 { }; }; }; + +panel: lvds-panel { + /* ... */ + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; +}; diff --git a/drivers/gpu/drm/imx/Kconfig b/drivers/gpu/drm/imx/Kconfig index 33cdddf26684..2b81a417cf29 100644 --- a/drivers/gpu/drm/imx/Kconfig +++ b/drivers/gpu/drm/imx/Kconfig @@ -36,6 +36,7 @@ config DRM_IMX_TVE config DRM_IMX_LDB tristate "Support for LVDS displays" depends on DRM_IMX && MFD_SYSCON + select DRM_PANEL help Choose this to enable the internal LVDS Display Bridge (LDB) found on i.MX53 and i.MX6 processors. diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index cd062b11a102..4286399590c3 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -19,10 +19,11 @@ #include #include #include +#include #include #include -#include #include +#include #include