From 64c7f0e513de1293179dd168a439d43e39cdeed9 Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Tue, 13 Aug 2024 15:42:21 +0800 Subject: [PATCH] arm64: dts: imx8mq: Add dbi2 and atu reg for i.MX8MQ PCIe EP Add dbi2 and iatu reg for i.MX8MQ PCIe EP. For i.MX8M PCIe EP, the dbi2 and atu addresses are pre-defined in the driver. This method is not good. In commit b7d67c6130ee ("PCI: imx6: Add iMX95 Endpoint (EP) support"), Frank suggests to fetch the dbi2 and atu from DT directly. This commit is preparation to do that for i.MX8MQ PCIe EP. These changes wouldn't break driver function. When "dbi2" and "atu" properties are present, i.MX PCIe driver would fetch the according base addresses from DT directly. If only two reg properties are provided, i.MX PCIe driver would fall back to the old method. Signed-off-by: Richard Zhu Reviewed-by: Frank Li Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index e03186bbc415..d51de8d899b2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -1819,9 +1819,11 @@ pcie1_ep: pcie-ep@33c00000 { compatible = "fsl,imx8mq-pcie-ep"; - reg = <0x33c00000 0x000400000>, - <0x20000000 0x08000000>; - reg-names = "dbi", "addr_space"; + reg = <0x33c00000 0x100000>, + <0x20000000 0x8000000>, + <0x33d00000 0x100000>, + <0x33f00000 0x100000>; + reg-names = "dbi", "addr_space", "dbi2", "atu"; num-lanes = <1>; interrupts = ; interrupt-names = "dma"; -- 2.50.1