From 57ab1757f68d605597bd1bccdd15b06e5cc2edf2 Mon Sep 17 00:00:00 2001 From: Manikandan Muralidharan Date: Wed, 14 Aug 2024 11:43:14 +0530 Subject: [PATCH] ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node The driver data specific to each pinctrl GPIO bank compatible nodes are not the same and declaring additional compatible string as fallback has no specific purpose, hence, removing the "atmel,at91sam9x5-gpio" compatible from sam9x60 SoC DT. Note: The at91 pinctrl driver uses "atmel,at91rm9200-gpio" compatible string to find the number of active GPIO banks and identify the pinmux nodes.It should used as a constant across all DT for GPIO node banks that uses PIO3 based pinctrl driver Signed-off-by: Manikandan Muralidharan Acked-by: Linus Walleij Link: https://lore.kernel.org/r/20240814061315.112564-4-manikandan.m@microchip.com Signed-off-by: Claudiu Beznea --- arch/arm/boot/dts/microchip/sam9x60.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi index afd3086c98fc..76d467cc2892 100644 --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi @@ -1262,7 +1262,7 @@ >; pioA: gpio@fffff400 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1273,7 +1273,7 @@ }; pioB: gpio@fffff600 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1285,7 +1285,7 @@ }; pioC: gpio@fffff800 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1296,7 +1296,7 @@ }; pioD: gpio@fffffa00 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; -- 2.50.1