From 461f24bff86808ee5fbfe74751a825f8a7ab24e0 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 12 Feb 2025 21:28:04 +0200 Subject: [PATCH] usb: dwc3: gadget: Avoid using reserved endpoints on Intel Merrifield MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Intel Merrifield SoC uses these endpoints for tracing and they cannot be re-allocated if being used because the side band flow control signals are hard wired to certain endpoints: • 1 High BW Bulk IN (IN#1) (RTIT) • 1 1KB BW Bulk IN (IN#8) + 1 1KB BW Bulk OUT (Run Control) (OUT#8) In device mode, since RTIT (EP#1) and EXI/RunControl (EP#8) uses External Buffer Control (EBC) mode, these endpoints are to be mapped to EBC mode (to be done by EXI target driver). Additionally TRB for RTIT and EXI are maintained in STM (System Trace Module) unit and the EXI target driver will as well configure the TRB location for EP #1 IN and EP#8 (IN and OUT). Since STM/PTI and EXI hardware blocks manage these endpoints and interface to OTG3 controller through EBC interface, there is no need to enable any events (such as XferComplete etc) for these end points. Signed-off-by: Andy Shevchenko Tested-by: Ferry Toth Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20250212193116.2487289-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-pci.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 052852f80146..54a4ee2b90b7 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -148,11 +148,21 @@ static const struct property_entry dwc3_pci_intel_byt_properties[] = { {} }; +/* + * Intel Merrifield SoC uses these endpoints for tracing and they cannot + * be re-allocated if being used because the side band flow control signals + * are hard wired to certain endpoints: + * - 1 High BW Bulk IN (IN#1) (RTIT) + * - 1 1KB BW Bulk IN (IN#8) + 1 1KB BW Bulk OUT (Run Control) (OUT#8) + */ +static const u8 dwc3_pci_mrfld_reserved_endpoints[] = { 3, 16, 17 }; + static const struct property_entry dwc3_pci_mrfld_properties[] = { PROPERTY_ENTRY_STRING("dr_mode", "otg"), PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"), PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"), PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"), + PROPERTY_ENTRY_U8_ARRAY("snps,reserved-endpoints", dwc3_pci_mrfld_reserved_endpoints), PROPERTY_ENTRY_BOOL("snps,usb2-gadget-lpm-disable"), PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"), {} -- 2.50.1