From 4372c82dec4abea605d311df411a2788f33fdf8e Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Sun, 27 Jun 2021 17:16:16 +0530 Subject: [PATCH] arm64: dts: qcom: Fix usb entries for SA8155p adp board SA8155p adp board has two USB A-type receptacles called USB-portB and USB-portC respectively. While USB-portB is a USB High-Speed connector/interface, the USB-portC one is a USB 3.1 Super-Speed connector/interface. Also the USB-portB is used as the USB emergency download port (for image download purposes). Enable both the ports on the board in USB Host mode (since all the USB interfaces are brought out to USB Type A connectors). Cc: Bjorn Andersson Signed-off-by: Bhupesh Sharma Link: https://lore.kernel.org/r/20210627114616.717101-4-bhupesh.sharma@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 60 ++++++++++++++++++++---- 1 file changed, 51 insertions(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 0da7a3b8d1bf3..5ae2ddc65f7e4 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -307,10 +307,6 @@ status = "okay"; }; -&tlmm { - gpio-reserved-ranges = <0 4>; -}; - &uart2 { status = "okay"; }; @@ -337,6 +333,16 @@ vdda-pll-max-microamp = <18300>; }; +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en1_default>; +}; &usb_1_hsphy { status = "okay"; @@ -346,15 +352,51 @@ }; &usb_1_qmpphy { + status = "disabled"; +}; + +&usb_2 { status = "okay"; - vdda-phy-supply = <&vreg_l8c_1p2>; - vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; }; -&usb_1 { +&usb_2_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en2_default>; +}; + +&usb_2_hsphy { status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; }; -&usb_1_dwc3 { - dr_mode = "peripheral"; +&usb_2_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l8c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + usb2phy_ac_en1_default: usb2phy_ac_en1_default { + mux { + pins = "gpio113"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; + }; + }; + + usb2phy_ac_en2_default: usb2phy_ac_en2_default { + mux { + pins = "gpio123"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; + }; + }; }; -- 2.51.0