From 3202ca221578850f34e0fea39dc6cfa745ed7aac Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Tue, 17 Dec 2024 10:51:01 +0100 Subject: [PATCH] PCI: Honor Max Link Speed when determining supported speeds MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The Supported Link Speeds Vector in the Link Capabilities 2 Register indicates the *supported* link speeds. The Max Link Speed field in the Link Capabilities Register indicates the *maximum* of those speeds. pcie_get_supported_speeds() neglects to honor the Max Link Speed field and will thus incorrectly deem higher speeds as supported. Fix it. One user-visible issue addressed here is an incorrect value in the sysfs attribute "max_link_speed". But the main motivation is a boot hang reported by Niklas: Intel JHL7540 "Titan Ridge 2018" Thunderbolt controllers supports 2.5-8 GT/s speeds, but indicate 2.5 GT/s as maximum. Ilpo recalls seeing this on more devices. It can be explained by the controller's Downstream Ports supporting 8 GT/s if an Endpoint is attached, but limiting to 2.5 GT/s if the port interfaces to a PCIe Adapter, in accordance with USB4 v2 sec 11.2.1: "This section defines the functionality of an Internal PCIe Port that interfaces to a PCIe Adapter. [...] The Logical sub-block shall update the PCIe configuration registers with the following characteristics: [...] Max Link Speed field in the Link Capabilities Register set to 0001b (data rate of 2.5 GT/s only). Note: These settings do not represent actual throughput. Throughput is implementation specific and based on the USB4 Fabric performance." The present commit is not sufficient on its own to fix Niklas' boot hang, but it is a prerequisite: A subsequent commit will fix the boot hang by enabling bandwidth control only if more than one speed is supported. The GENMASK() macro used herein specifies 0 as lowest bit, even though the Supported Link Speeds Vector ends at bit 1. This is done on purpose to avoid a GENMASK(0, 1) macro if Max Link Speed is zero. That macro would be invalid as the lowest bit is greater than the highest bit. Ilpo has witnessed a zero Max Link Speed on Root Complex Integrated Endpoints in particular, so it does occur in practice. (The Link Capabilities Register is optional on RCiEPs per PCIe r6.2 sec 7.5.3.) Fixes: d2bd39c0456b ("PCI: Store all PCIe Supported Link Speeds") Closes: https://lore.kernel.org/r/70829798889c6d779ca0f6cd3260a765780d1369.camel@kernel.org Link: https://lore.kernel.org/r/fe03941e3e1cc42fb9bf4395e302bff53ee2198b.1734428762.git.lukas@wunner.de Reported-by: Niklas Schnelle Tested-by: Niklas Schnelle Signed-off-by: Lukas Wunner Signed-off-by: Krzysztof Wilczyński Reviewed-by: Jonathan Cameron Reviewed-by: Ilpo Järvinen --- drivers/pci/pci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 0b29ec6e8e5e..661f98c6c63a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -6232,12 +6232,14 @@ u8 pcie_get_supported_speeds(struct pci_dev *dev) pcie_capability_read_dword(dev, PCI_EXP_LNKCAP2, &lnkcap2); speeds = lnkcap2 & PCI_EXP_LNKCAP2_SLS; + /* Ignore speeds higher than Max Link Speed */ + pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap); + speeds &= GENMASK(lnkcap & PCI_EXP_LNKCAP_SLS, 0); + /* PCIe r3.0-compliant */ if (speeds) return speeds; - pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap); - /* Synthesize from the Max Link Speed field */ if ((lnkcap & PCI_EXP_LNKCAP_SLS) == PCI_EXP_LNKCAP_SLS_5_0GB) speeds = PCI_EXP_LNKCAP2_SLS_5_0GB | PCI_EXP_LNKCAP2_SLS_2_5GB; -- 2.49.0