From 10b4593ba0f8b410d946d587828e6cae8f7cc78b Mon Sep 17 00:00:00 2001 From: Prashanth K Date: Tue, 31 Dec 2024 13:41:07 +0530 Subject: [PATCH] arm64: dts: qcom: sdm630: Disable USB U1/U2 entry Disable U1 and U2 power-saving states to improve stability of USB. These low-power link states, designed to reduce power consumption during idle periods, can cause issues in latency-sensitive or high throughput use cases. Over the years, some of the issues seen are as follows: 1. In device mode of operation, when UVC is active, enabling U1/U2 is sometimes causing packets drops due to delay in entry/exit of intermittent these low power states. These packet drops are often reflected as missed isochronous transfers, as the controller wasn't able to send packet in that microframe interval and hence glitches are seen on the final transmitted video output. 2. On older targets like SM8150/SM8250/SM8350, there have been throughput issues seen during tethering use cases. Disabling these intermittent power states enhances device stability without affecting power usage. Signed-off-by: Prashanth K Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20241231081115.3149850-10-quic_prashk@quicinc.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 19420cfdadf1..a2c079bac1a7 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1300,6 +1300,8 @@ snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; snps,parkmode-disable-ss-quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; phys = <&qusb2phy0>, <&usb3_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; @@ -1505,6 +1507,8 @@ interrupts = ; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; /* This is the HS-only host */ maximum-speed = "high-speed"; -- 2.50.1