From 0fbf6104e3ffbfd42f3f84d713f84f397641718e Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Fri, 18 Sep 2015 13:30:13 +0100
Subject: [PATCH] ARM: dts: apq8064: remove redundant i2c pinctrl properties

This patch removes i2c pinctrl properties from board which which are now
mentioned in the SOC specific file. This will avoid redundant properties
across multiple board fiiles.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
---
 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 11 -----------
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts  |  5 -----
 arch/arm/boot/dts/qcom-apq8064.dtsi         |  4 ++++
 3 files changed, 4 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 47c0282bdfca7..80ab5b88b0f47 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -13,15 +13,6 @@
 	};
 
 	soc {
-		pinctrl@800000 {
-			i2c1_pins: i2c1 {
-				mux {
-					pins = "gpio20", "gpio21";
-					function = "gsbi1";
-				};
-			};
-		};
-
 		rpm@108000 {
 			regulators {
 				vin_lvs1_3_6-supply = <&pm8921_s4>;
@@ -96,8 +87,6 @@
 			i2c@12460000 {
 				status = "okay";
 				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
 
 				eeprom: eeprom@50 {
 					compatible = "24c02";
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index f3100da082b2a..b701f33436bb0 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -119,8 +119,6 @@
 			qcom,mode = <GSBI_PROT_I2C>;
 			i2c3: i2c@16280000 {
 				status = "okay";
-				pinctrl-0 = <&i2c3_pins>;
-				pinctrl-names = "default";
 			};
 		};
 
@@ -131,8 +129,6 @@
 			i2c@12460000 {
 				status = "okay";
 				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
 
 				eeprom: eeprom@52 {
 					compatible = "atmel,24c128";
@@ -148,7 +144,6 @@
 
 			serial@16540000 {
 				status = "ok";
-
 				pinctrl-names = "default";
 				pinctrl-0 = <&uart_pins>;
 			};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index d2e94d647c279..53d5311894335 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -213,6 +213,8 @@
 
 			i2c1: i2c@12460000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
 				reg = <0x12460000 0x1000>;
 				interrupts = <0 194 IRQ_TYPE_NONE>;
 				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
@@ -258,6 +260,8 @@
 			ranges;
 			i2c3: i2c@16280000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c3_pins>;
+				pinctrl-names = "default";
 				reg = <0x16280000 0x1000>;
 				interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 				clocks = <&gcc GSBI3_QUP_CLK>,
-- 
2.50.1