From 06feac15406f4f66f4c0c6ea60b10d44775d4133 Mon Sep 17 00:00:00 2001 From: MD Danish Anwar Date: Tue, 5 Aug 2025 23:08:12 +0530 Subject: [PATCH] net: ti: icssg-prueth: Fix emac link speed handling When link settings are changed emac->speed is populated by emac_adjust_link(). The link speed and other settings are then written into the DRAM. However if both ports are brought down after this and brought up again or if the operating mode is changed and a firmware reload is needed, the DRAM is cleared by icssg_config(). As a result the link settings are lost. Fix this by calling emac_adjust_link() after icssg_config(). This re populates the settings in the DRAM after a new firmware load. Fixes: 9facce84f406 ("net: ti: icssg-prueth: Fix firmware load sequence.") Signed-off-by: MD Danish Anwar Reviewed-by: Andrew Lunn Message-ID: <20250805173812.2183161-1-danishanwar@ti.com> Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/ti/icssg/icssg_prueth.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c index 2b973d6e2341c..6c7d776ae4eed 100644 --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c @@ -50,6 +50,8 @@ /* CTRLMMR_ICSSG_RGMII_CTRL register bits */ #define ICSSG_CTRL_RGMII_ID_MODE BIT(24) +static void emac_adjust_link(struct net_device *ndev); + static int emac_get_tx_ts(struct prueth_emac *emac, struct emac_tx_ts_response *rsp) { @@ -229,6 +231,10 @@ static int prueth_emac_common_start(struct prueth *prueth) ret = icssg_config(prueth, emac, slice); if (ret) goto disable_class; + + mutex_lock(&emac->ndev->phydev->lock); + emac_adjust_link(emac->ndev); + mutex_unlock(&emac->ndev->phydev->lock); } ret = prueth_emac_start(prueth); -- 2.51.0