From 063fc4d0434791384da13c1a25814dd37c94c129 Mon Sep 17 00:00:00 2001 From: "Mintz, Yuval" Date: Sun, 19 Mar 2017 13:08:15 +0200 Subject: [PATCH] qed: Correct default VF coalescing configuration Orabug: 25933053, 26439680 When starting the VF's vport, the PF would first configure the status blocks of the VF and then reset them. That would cause some of the configured information to be lost - specifically it would mean that all the VFs queues would use the Rx coalescing state-machine of the status block. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller Signed-off-by: Brian Maly --- drivers/net/ethernet/qlogic/qed/qed_sriov.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c index e9d534af224f..486a1c06a27e 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c @@ -1752,6 +1752,8 @@ static void qed_iov_vf_mbx_start_vport(struct qed_hwfn *p_hwfn, vf->state = VF_ENABLED; start = &mbx->req_virt->start_vport; + qed_iov_enable_vf_traffic(p_hwfn, p_ptt, vf); + /* Initialize Status block in CAU */ for (sb_id = 0; sb_id < vf->num_sbs; sb_id++) { if (!start->sb_addr[sb_id]) { @@ -1765,7 +1767,6 @@ static void qed_iov_vf_mbx_start_vport(struct qed_hwfn *p_hwfn, start->sb_addr[sb_id], vf->igu_sbs[sb_id], vf->abs_vf_id, 1); } - qed_iov_enable_vf_traffic(p_hwfn, p_ptt, vf); vf->mtu = start->mtu; vf->shadow_config.inner_vlan_removal = start->inner_vlan_removal; -- 2.50.1