mmc: sdhci-msm: Enable delay circuit calibration clocks

mmc: sdhci-msm: Enable delay circuit calibration clocks

The delay circuit used to support HS400 is calibrated based on two
additional clocks. When these clocks are not available and
FF_CLK_SW_RST_DIS is not set in CORE_HC_MODE, reset might fail. But on
some platforms this doesn't work properly and below dump can be seen in
the kernel log.

  mmc0: Reset 0x1 never completed.
  mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
  mmc0: sdhci: Sys addr:  0x00000000 | Version:  0x00001102
  mmc0: sdhci: Blk size:  0x00004000 | Blk cnt:  0x00000000
  mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000000
  mmc0: sdhci: Present:   0x01f80000 | Host ctl: 0x00000000
  mmc0: sdhci: Power:     0x00000000 | Blk gap:  0x00000000
  mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x00000002
  mmc0: sdhci: Timeout:   0x00000000 | Int stat: 0x00000000
  mmc0: sdhci: Int enab:  0x00000000 | Sig enab: 0x00000000
  mmc0: sdhci: AC12 err:  0x00000000 | Slot int: 0x00000000
  mmc0: sdhci: Caps:      0x742dc8b2 | Caps_1:   0x00008007
  mmc0: sdhci: Cmd:       0x00000000 | Max curr: 0x00000000
  mmc0: sdhci: Resp[0]:   0x00000000 | Resp[1]:  0x00000000
  mmc0: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
  mmc0: sdhci: Host ctl2: 0x00000000
  mmc0: sdhci: ============================================

Add support for the additional calibration clocks to allow these
platforms to be configured appropriately.

Cc: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Cc: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Jeremy McNicoll <jeremymc@redhat.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>