media: atomisp: improve sensor detection code to use _DSM table
Instead of keep hardcoding device-specific tables, read them
directly from the ACPI BIOS, if available.
This method is know to work with Asus T101HA device. the
same table is also visible on EzPad devices. So, it seems
that at least some BIOSes use this method to pass data about
ISP2401-connected sensors.
media: atomisp: get rid of an iomem abstraction layer
The hive_isp_css_custom_host_hrt.h code, together
with atomisp_helper.h, provides an abstraction layer for
some functions inside atomisp_compat_css20.c and atomisp_cmd.c.
There's no good reason for that. In a matter of fact, after
removing the abstraction, the code looked a lot cleaner
and easier to understand.
So, get rid of them.
While here, get rid also of the udelay(1) abstraction code.
There are several parts of the driver that could produce
a "dfs failed!" message. Change the texts, in order to help
identifying from where they're coming.
media: atomisp: change the detection of ISP2401 at runtime
Instead of having a static var to detect it, let's use the
already-existing arch-specific bytes, as this is how other
parts of the code also checks when it needs to do something
different, depending on an specific chipset version.
media: atomisp: don't set hpll_freq twice with different values
The logic which sets the hpll_freq for BYT sets hpll_freq
to 1600MHz, but ignores it, and sets it again after reading
from-device-specific EFI vars (this time, using a default
of 2000MHz).
Remove the first set, as this will be overriden anyway.
While here, do minor adjustments on comments and on a
printk message.
Well, this is something that we don't have upstream. So,
without further details about that, we can't really parse it.
If we ever end supporting those devices with the upstream driver,
this patch can be reverted and the device can be detected
via DMI (or maybe via PCI ID?).
There are lots of mess with IRQ ifdef settings. As the
*_global.h will already detect the type of IRQ system at
compile time, we can get rid of them, replacing by just
one ifdef for ISP2401.
Arnd Bergmann [Fri, 29 May 2020 20:00:27 +0000 (22:00 +0200)]
media: staging: media: atomisp: fix stack overflow in init_pipe_defaults()
When building with clang, multiple copies of the structures to be
initialized are passed around on the stack and copied locally, using an
insane amount of stack space:
drivers/staging/media/atomisp/pci/sh_css.c:2371:1: error: stack frame size of 26864 bytes in function 'create_pipe' [-Werror,-Wframe-larger-than=]
Use constantly-allocated variables plus an explicit memcpy()
to avoid that.
Co-authored-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Fixes: 6dc9a2568f84 ("media: atomisp: convert default struct values to use compound-literals with designated initializers") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Fri, 29 May 2020 20:00:30 +0000 (22:00 +0200)]
media: staging: media: atomisp: disable all custom formats
clang points out the usage of an incorrect enum type in the
list of supported image formats:
drivers/staging/media/atomisp/pci/atomisp_subdev.c:49:65: error: implicit conversion from enumeration type 'enum ia_css_frame_format' to different enumeration type 'enum atomisp_input_format' [-Werror,-Wenum-conversion]
{ V4L2_MBUS_FMT_CUSTOM_NV21, 12, 12, CSS_FRAME_FORMAT_NV21, 0, CSS_FRAME_FORMAT_NV21 },
drivers/staging/media/atomisp/pci/atomisp_subdev.c:49:39: error: implicit conversion from enumeration type 'enum ia_css_frame_format' to different enumeration type 'enum atomisp_input_format' [-Werror,-Wenum-conversion]
{ V4L2_MBUS_FMT_CUSTOM_NV21, 12, 12, CSS_FRAME_FORMAT_NV21, 0, CSS_FRAME_FORMAT_NV21 },
{ V4L2_MBUS_FMT_CUSTOM_NV12, 12, 12, CSS_FRAME_FORMAT_NV12, 0, CSS_FRAME_FORMAT_NV12 },
{ MEDIA_BUS_FMT_JPEG_1X8, 8, 8, CSS_FRAME_FORMAT_BINARY_8, 0, ATOMISP_INPUT_FORMAT_BINARY_8 },
Checking the git history, I found a commit that disabled one such case
because it did not work. It seems likely that the incorrect enum was
part of the original problem and that the others do not work either,
or have never been tested.
Arnd Bergmann [Fri, 29 May 2020 20:00:29 +0000 (22:00 +0200)]
media: staging: media: atomisp: fix enum type mixups
Some function calls pass an incorrect enum type:
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:858:16: error: implicit conversion from enumeration type 'input_system_ID_t' to different enumeration type 'gp_device_ID_t' [-Werror,-Wenum-conversion]
gp_device_rst(INPUT_SYSTEM0_ID);
~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:860:19: error: implicit conversion from enumeration type 'input_system_ID_t' to different enumeration type 'gp_device_ID_t' [-Werror,-Wenum-conversion]
input_switch_rst(INPUT_SYSTEM0_ID);
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:876:27: error: implicit conversion from enumeration type 'input_system_cfg_flag_t' to different enumeration type 'input_system_connection_t' [-Werror,-Wenum-conversion]
config.multicast[i] = INPUT_SYSTEM_CFG_FLAG_RESET;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:1326:32: error: implicit conversion from enumeration type 'input_system_ID_t' to different enumeration type 'gp_device_ID_t' [-Werror,-Wenum-conversion]
input_selector_cfg_for_sensor(INPUT_SYSTEM0_ID);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:1329:19: error: implicit conversion from enumeration type 'input_system_ID_t' to different enumeration type 'gp_device_ID_t' [-Werror,-Wenum-conversion]
input_switch_cfg(INPUT_SYSTEM0_ID, &config.input_switch_cfg);
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~
INPUT_SYSTEM0_ID is zero, so use the corresponding zero-value
of the expected types instead.
Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Fri, 29 May 2020 20:00:24 +0000 (22:00 +0200)]
media: staging: media: atomisp: declare 'struct device' before using it
In some configurations, including this header leads to a warning:
drivers/staging/media/atomisp//pci/sh_css_firmware.h:41:38: error: declaration of 'struct device' will not be visible outside of this function [-Werror,-Wvisibility]
Make sure the struct tag is known before declaring a function
that uses it as an argument.
This driver is licensed under GPL 2.0, as stated inside their
headers.
Add the proper tag there. We should probably latter cleanup
the reduntant licensing text, but this could be done later,
after we get rid of other abstraction layers.
The struct atomisp_overlay contains overlay_start_x and overlay_start_y
fields. Instead of copying the value of the overlay_start_x field between
the two structs, the value of the overlay_start_y field of the compat
struct was copied to the overlay_start_x field of the 64-bit kernel struct
in get operation and back in put. The overlay_start_x field value was not
copied from or to the user space struct.
Fix this so that the value of overlay_start_x is copied to overlay_start_x
and the value of overlay_start_y is copied to overlay_start_y.
Also do copy blend_overlay_perc_u field only once.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Vitaly Kuznetsov [Wed, 10 Jun 2020 16:41:16 +0000 (18:41 +0200)]
KVM: selftests: fix sync_with_host() in smm_test
It was reported that older GCCs compile smm_test in a way that breaks
it completely:
kvm_exit: reason EXIT_CPUID rip 0x4014db info 0 0
func 7ffffffd idx 830 rax 0 rbx 0 rcx 0 rdx 0, cpuid entry not found
...
kvm_exit: reason EXIT_MSR rip 0x40abd9 info 0 0
kvm_msr: msr_read 487 = 0x0 (#GP)
...
Note, '7ffffffd' was supposed to be '80000001' as we're checking for
SVM. Dropping '-O2' from compiler flags help. Turns out, asm block in
sync_with_host() is wrong. We us 'in 0xe, %%al' instruction to sync
with the host and in 'AL' register we actually pass the parameter
(stage) but after sync 'AL' gets written to but GCC thinks the value
is still there and uses it to compute 'EAX' for 'cpuid'.
smm_test can't fully use standard ucall() framework as we need to
write a very simple SMI handler there. Fix the immediate issue by
making RAX input/output operand. While on it, make sync_with_host()
static inline.
Reported-by: Marcelo Bandeira Condotta <mcondotta@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610164116.770811-1-vkuznets@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Wed, 10 Jun 2020 17:55:32 +0000 (19:55 +0200)]
KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected
'Page not present' event may or may not get injected depending on
guest's state. If the event wasn't injected, there is no need to
inject the corresponding 'page ready' event as the guest may get
confused. E.g. Linux thinks that the corresponding 'page not present'
event wasn't delivered *yet* and allocates a 'dummy entry' for it.
This entry is never freed.
Note, 'wakeup all' events have no corresponding 'page not present'
event and always get injected.
s390 seems to always be able to inject 'page not present', the
change is effectively a nop.
Vitaly Kuznetsov [Wed, 10 Jun 2020 17:55:31 +0000 (19:55 +0200)]
KVM: async_pf: Cleanup kvm_setup_async_pf()
schedule_work() returns 'false' only when the work is already on the queue
and this can't happen as kvm_setup_async_pf() always allocates a new one.
Also, to avoid potential race, it makes sense to to schedule_work() at the
very end after we've added it to the queue.
While on it, do some minor cleanup. gfn_to_pfn_async() mentioned in a
comment does not currently exist and, moreover, we can check
kvm_is_error_hva() at the very beginning, before we try to allocate work so
'retry_sync' label can go away completely.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610175532.779793-1-vkuznets@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Colin Ian King [Tue, 9 Jun 2020 23:31:21 +0000 (00:31 +0100)]
kvm: i8254: remove redundant assignment to pointer s
The pointer s is being assigned a value that is never read, the
assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20200609233121.1118683-1-colin.king@canonical.com> Fixes: 7837699fa6d7 ("KVM: In kernel PIT model") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Felipe Franciosi [Tue, 19 May 2020 08:11:22 +0000 (08:11 +0000)]
KVM: x86: respect singlestep when emulating instruction
When userspace configures KVM_GUESTDBG_SINGLESTEP, KVM will manage the
presence of X86_EFLAGS_TF via kvm_set/get_rflags on vcpus. The actual
rflag bit is therefore hidden from callers.
That includes init_emulate_ctxt() which uses the value returned from
kvm_get_flags() to set ctxt->tf. As a result, x86_emulate_instruction()
will skip a single step, leaving singlestep_rip stale and not returning
to userspace.
This resolves the issue by observing the vcpu guest_debug configuration
alongside ctxt->tf in x86_emulate_instruction(), performing the single
step if set.
Cc: stable@vger.kernel.org Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <20200519081048.8204-1-felipe@nutanix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Wed, 10 Jun 2020 13:58:46 +0000 (15:58 +0200)]
KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check
state_test/smm_test use KVM_CAP_NESTED_STATE check as an indicator for
nested VMX/SVM presence and this is incorrect. Check for the required
features dirrectly.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610135847.754289-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
media: atomisp: get rid of an error abstraction layer
There is an abstraction layer there meant to convert to
the Linux standard error codes. As the driver now use
such errors everywhere. we can get rid of this.
The atomisp driver has its own error codes under the
ia_css_err.h file. On several places, those got already
replaced by standard error codes, but there are still a
lot more to be fixed.
Let's get rid of all of those, mapping them into
the already-existing set of Linux error codes.
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c:1707:64:
warning: implicit conversion from enumeration type 'const enum
ia_css_frame_format' to different enumeration type 'enum
atomisp_input_format' [-Wenum-conversion]
binary_supports_input_format(xcandidate, req_in_info->format));
~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~^~~~~~
As it turns out, binary_supports_input_format only asserts that
xcandidate is not NULL and just returns true so this call is never
actually made.
There are other functions that are called that assert info is not NULL
so this function actually serves no purpose. Remove it. It can be
brought back if needed later.
Nathan Chancellor [Wed, 27 May 2020 07:11:49 +0000 (09:11 +0200)]
media: atomisp: Avoid overflow in compute_blending
Clang warns:
drivers/staging/media/atomisp/pci/isp/kernels/xnr/xnr_3.0/ia_css_xnr3.host.c:129:35:
warning: implicit conversion from 'unsigned long' to 'int32_t' (aka
'int') changes value from 18446744073709543424 to -8192
[-Wconstant-conversion]
return MAX(MIN(isp_strength, 0), -XNR_BLENDING_SCALE_FACTOR);
~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
XNR_BLENDING_SCALE_FACTOR is BIT(13), or 8192, which will easily fit
into a signed 32-bit integer. However, it is an unsigned long, which
means that negating it is the same as subtracting that value from
ULONG_MAX + 1, which causes it to be larger than a signed 32-bit
integer so it gets implicitly converted.
We can avoid this by using the variable isp_scale, which holds the value
of XNR_BLENDING_SCALE_FACTOR already, where the implicit conversion from
unsigned long to s32 already happened. If that were to ever overflow,
clang would warn: https://godbolt.org/z/EeSxLG
Nathan Chancellor [Wed, 27 May 2020 07:11:48 +0000 (09:11 +0200)]
media: atomisp: Remove unnecessary NULL check in atomisp_param
Clang warns:
drivers/staging/media/atomisp/pci/atomisp_cmd.c:4278:17: warning:
address of 'config->info' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (!&config->info) {
~ ~~~~~~~~^~~~
config cannot be NULL because it comes from an ioctl, which ensures that
the user is not giving us an invalid pointer through copy_from_user. If
config is not NULL, info cannot be NULL. Remove this check.
Nathan Chancellor [Wed, 27 May 2020 07:11:47 +0000 (09:11 +0200)]
media: atomisp: Remove unnecessary NULL checks in ia_css_pipe_load_extension
Clang warns:
../drivers/staging/media/atomisp/pci/sh_css.c:8537:14: warning: address
of 'pipe->output_stage' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (&pipe->output_stage)
~~ ~~~~~~^~~~~~~~~~~~
../drivers/staging/media/atomisp/pci/sh_css.c:8545:14: warning: address
of 'pipe->vf_stage' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (&pipe->vf_stage)
~~ ~~~~~~^~~~~~~~
output_stage and vf_stage are pointers in the middle of a struct, their
addresses cannot be NULL if pipe is not NULL and pipe is already checked
for NULL in this function. Simplify this if block.
Nathan Chancellor [Wed, 27 May 2020 07:11:45 +0000 (09:11 +0200)]
media: atomisp: Remove second increment of count in atomisp_subdev_probe
Clang warns:
../drivers/staging/media/atomisp/pci/atomisp_v4l2.c:1097:3: warning:
variable 'count' is incremented both in the loop header and in the loop
body [-Wfor-loop-analysis]
count++;
^
Nathan Chancellor [Wed, 27 May 2020 07:11:44 +0000 (09:11 +0200)]
media: atomisp: Clean up if block in sh_css_sp_init_stage
Clang warns:
../drivers/staging/media/atomisp/pci/sh_css_sp.c:1039:23: warning:
address of 'binary->in_frame_info' will always evaluate to 'true'
[-Wpointer-bool-conversion]
} else if (&binary->in_frame_info) {
~~ ~~~~~~~~^~~~~~~~~~~~~
in_frame_info is not a pointer so if binary is not NULL, in_frame_info's
address cannot be NULL. Change this to an else since it will always be
evaluated as one.
While we are here, clean up this if block. The contents of both if
blocks are the same but a check against "stage == 0" is added when
ISP2401 is defined. USE_INPUT_SYSTEM_VERSION_2401 is only defined when
isp2401_system_global.h is included, which only happens when ISP2401. In
other words, USE_INPUT_SYSTEM_VERSION_2401 always requires ISP2401 to be
defined so the '#ifndef ISP2401' makes no sense. Remove that part of the
block to simplify everything.
media: atomisp: add more comments about frame allocation
The frame allocation logic happens differently for userptr
or normal mmap. On a quick look, this sounded to be unbalanced,
but the logic should actually work for both cases.
Colin Ian King [Thu, 21 May 2020 19:44:32 +0000 (21:44 +0200)]
media: atomisp: fix a handful of spelling mistakes
There are several spelling mistakes in various messages and literal
strings. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In other words, we have:
MAX_NUM_VIDEO_DELAY_FRAMES = 3
MAX_NUM_DELAY_FRAMES = 2
The MAX_NUM_DELAY_FRAMES macro is used only only when allocating
memory. On all other parts, including looping over such array,
MAX_NUM_VIDEO_DELAY_FRAMES is used instead, like:
void sh_css_binary_args_reset(struct sh_css_binary_args *args)
{
unsigned int i;
...
for (i = 0; i < MAX_NUM_VIDEO_DELAY_FRAMES; i++)
args->delay_frames[i] = NULL;
Which will cause buffer overflows, with may override the next array
(tnr_frames[]).
In practice, this may not be causing real issues, as the code
checks for num_delay_frames on some parts (but not everywhere).
So, get rid of the smallest value.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some arguments for tnf and ref settings are meant to be const, but
they're defined without such annotation. Due to that, there's an
ugly cast at sh_css_sp.c.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: atomisp: get rid of some old broken debug code
It sounds that someone once changed the debug level at compile
time for some testing, but forgot to remove the legacy code after
finishing debuging it.
Get rid of the dead code.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: atomisp: don't flood dmesg with -EAGAIN return codes
Using DQBUF on non-blocking mode will return -EAGAIN
if nothing arrives. Printing it has no value, even for debug
purposes. So, only display real return codes.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Flooding the dmesg with lots of messages per second. The same
pattern happens for all other IRQs.
Change the logic for printing just one message per IRQ and
rate-limit those, as, for debugging purposes, it is usually
interesting to know that IRQs are being received, but not
displaying every single one.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Xiaoguang Wang [Thu, 11 Jun 2020 15:39:36 +0000 (23:39 +0800)]
io_uring: fix io_kiocb.flags modification race in IOPOLL mode
While testing io_uring in arm, we found sometimes io_sq_thread() keeps
polling io requests even though there are not inflight io requests in
block layer. After some investigations, found a possible race about
io_kiocb.flags, see below race codes:
1) in the end of io_write() or io_read()
req->flags &= ~REQ_F_NEED_CLEANUP;
kfree(iovec);
return ret;
2) in io_complete_rw_iopoll()
if (res != -EAGAIN)
req->flags |= REQ_F_IOPOLL_COMPLETED;
In IOPOLL mode, io requests still maybe completed by interrupt, then
above codes are not safe, concurrent modifications to req->flags, which
is not protected by lock or is not atomic modifications. I also had
disassemble io_complete_rw_iopoll() in arm:
req->flags |= REQ_F_IOPOLL_COMPLETED;
0xffff000008387b18 <+76>: ldr w0, [x19,#104]
0xffff000008387b1c <+80>: orr w0, w0, #0x1000
0xffff000008387b20 <+84>: str w0, [x19,#104]
Seems that the "req->flags |= REQ_F_IOPOLL_COMPLETED;" is load and
modification, two instructions, which obviously is not atomic.
To fix this issue, add a new iopoll_completed in io_kiocb to indicate
whether io request is completed.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sean Christopherson [Thu, 27 Feb 2020 17:44:30 +0000 (09:44 -0800)]
KVM: nVMX: Consult only the "basic" exit reason when routing nested exit
Consult only the basic exit reason, i.e. bits 15:0 of vmcs.EXIT_REASON,
when determining whether a nested VM-Exit should be reflected into L1 or
handled by KVM in L0.
For better or worse, the switch statement in nested_vmx_exit_reflected()
currently defaults to "true", i.e. reflects any nested VM-Exit without
dedicated logic. Because the case statements only contain the basic
exit reason, any VM-Exit with modifier bits set will be reflected to L1,
even if KVM intended to handle it in L0.
Practically speaking, this only affects EXIT_REASON_MCE_DURING_VMENTRY,
i.e. a #MC that occurs on nested VM-Enter would be incorrectly routed to
L1, as "failed VM-Entry" is the only modifier that KVM can currently
encounter. The SMM modifiers will never be generated as KVM doesn't
support/employ a SMI Transfer Monitor. Ditto for "exit from enclave",
as KVM doesn't yet support virtualizing SGX, i.e. it's impossible to
enter an enclave in a KVM guest (L1 or L2).
Fixes: 644d711aa0e1 ("KVM: nVMX: Deciding if L0 or L1 should handle an L2 exit") Cc: Jim Mattson <jmattson@google.com> Cc: Xiaoyao Li <xiaoyao.li@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200227174430.26371-1-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Krzysztof Kozlowski [Wed, 10 Jun 2020 15:41:57 +0000 (17:41 +0200)]
spi: spi-fsl-dspi: Free DMA memory with matching function
Driver allocates DMA memory with dma_alloc_coherent() but frees it with
dma_unmap_single().
This causes DMA warning during system shutdown (with DMA debugging) on
Toradex Colibri VF50 module:
WARNING: CPU: 0 PID: 1 at ../kernel/dma/debug.c:1036 check_unmap+0x3fc/0xb04
DMA-API: fsl-edma 40098000.dma-controller: device driver frees DMA memory with wrong function
[device address=0x0000000087040000] [size=8 bytes] [mapped as coherent] [unmapped as single]
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
(unwind_backtrace) from [<8010bb34>] (show_stack+0x10/0x14)
(show_stack) from [<8011ced8>] (__warn+0xf0/0x108)
(__warn) from [<8011cf64>] (warn_slowpath_fmt+0x74/0xb8)
(warn_slowpath_fmt) from [<8017d170>] (check_unmap+0x3fc/0xb04)
(check_unmap) from [<8017d900>] (debug_dma_unmap_page+0x88/0x90)
(debug_dma_unmap_page) from [<80601d68>] (dspi_release_dma+0x88/0x110)
(dspi_release_dma) from [<80601e4c>] (dspi_shutdown+0x5c/0x80)
(dspi_shutdown) from [<805845f8>] (device_shutdown+0x17c/0x220)
(device_shutdown) from [<80143ef8>] (kernel_restart+0xc/0x50)
(kernel_restart) from [<801441cc>] (__do_sys_reboot+0x18c/0x210)
(__do_sys_reboot) from [<80100060>] (ret_fast_syscall+0x0/0x28)
DMA-API: Mapped at:
dma_alloc_attrs+0xa4/0x130
dspi_probe+0x568/0x7b4
platform_drv_probe+0x6c/0xa4
really_probe+0x208/0x348
driver_probe_device+0x5c/0xb4
Fixes: 90ba37033cb9 ("spi: spi-fsl-dspi: Add DMA support for Vybrid") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1591803717-11218-1-git-send-email-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
Qing Zhang [Thu, 11 Jun 2020 12:56:52 +0000 (20:56 +0800)]
spi: tools: Add macro definitions to fix build errors
Add SPI_TX_OCTAL and SPI_RX_OCTAL to fix the following build errors:
CC spidev_test.o
spidev_test.c: In function ‘transfer’:
spidev_test.c:131:13: error: ‘SPI_TX_OCTAL’ undeclared (first use in this function)
if (mode & SPI_TX_OCTAL)
^
spidev_test.c:131:13: note: each undeclared identifier is reported only once for each function it appears in
spidev_test.c:137:13: error: ‘SPI_RX_OCTAL’ undeclared (first use in this function)
if (mode & SPI_RX_OCTAL)
^
spidev_test.c: In function ‘parse_opts’:
spidev_test.c:290:12: error: ‘SPI_TX_OCTAL’ undeclared (first use in this function)
mode |= SPI_TX_OCTAL;
^
spidev_test.c:308:12: error: ‘SPI_RX_OCTAL’ undeclared (first use in this function)
mode |= SPI_RX_OCTAL;
^
LD spidev_test-in.o
ld: cannot find spidev_test.o: No such file or directory
Additionally, maybe SPI_CS_WORD and SPI_3WIRE_HIZ will be used in the future,
so add them too.
Fixes: 896fa735084e ("spi: spidev_test: Add support for Octal mode data transfers") Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1591880212-13479-2-git-send-email-zhangqing@loongson.cn Signed-off-by: Mark Brown <broonie@kernel.org>
Qing Zhang [Thu, 11 Jun 2020 12:56:51 +0000 (20:56 +0800)]
spi: tools: Make default_tx/rx and input_tx static
Fix the following sparse warning:
./spidev_test.c:50:9: warning: symbol 'default_tx' was not declared. Should it be static?
./spidev_test.c:59:9: warning: symbol 'default_rx' was not declared. Should it be static?
./spidev_test.c:60:6: warning: symbol 'input_tx' was not declared. Should it be static?
projects / users / willy / linux.git / log