libperf: Add arm64 support to perf_mmap__read_self()

Add the arm64 variants for read_perf_counter() and read_timestamp().
Unfortunately the counter number is encoded into the instruction, so the
code is a bit verbose to enumerate all possible counters.

Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220201214056.702854-1-robh@kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org

tools include UAPI: Sync sound/asound.h copy with the kernel sources

Picking the changes from:

  06feec6005c9d950 ("ASoC: hdmi-codec: Fix OOB memory accesses")

Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.

To silence this perf tools build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
  diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h

Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/lkml/Yf+6OT+2eMrYDEeX@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Fix display of grouped aliased events

An event may have a number of uncore aliases that when added to the
evlist are consecutive.

If there are multiple uncore events in a group then
parse_events__set_leader_for_uncore_aliase will reorder the evlist so
that events on the same PMU are adjacent.

The collect_all_aliases function assumes that aliases are in blocks so
that only the first counter is printed and all others are marked merged.

The reordering for groups breaks the assumption and so all counts are
printed.

This change removes the assumption from collect_all_aliases
that the events are in blocks and instead processes the entire evlist.

Before:

  ```
  $ perf stat -e '{UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE,UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE},duration_time' -a -A -- sleep 1

   Performance counter stats for 'system wide':

  CPU0                  256,866      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 494,413      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      967      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,738      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  285,161      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 429,920      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      955      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,443      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  310,753      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 416,657      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,231      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,573      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  416,067      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 405,966      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,481      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,447      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  312,911      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 408,154      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,086      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,380      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  333,994      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 370,349      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,287      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,335      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  188,107      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 302,423      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      701      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,070      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  307,221      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 383,642      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,036      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,158      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  318,479      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 821,545      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,028      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,550      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  227,618      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 372,272      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      903      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,456      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  376,783      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 419,827      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,406      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,453      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  286,583      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 429,956      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      999      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,436      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  313,867      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 370,159      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,114      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,291      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  342,083      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 409,111      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,399      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,684      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  365,828      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 376,037      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,378      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,411      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  382,456      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 621,743      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,232      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,955      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  342,316      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 385,067      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,176      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,268      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  373,588      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 386,163      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,394      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,464      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  381,206      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 546,891      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,266      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,712      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  221,176      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 392,069      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      831      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,456      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  355,401      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 705,595      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,235      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,216      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  371,436      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 428,103      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,306      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,442      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  384,352      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 504,200      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,468      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,860      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  228,856      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 287,976      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      832      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,060      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  215,121      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 334,162      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      681      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,026      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  296,179      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 436,083      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,084      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,525      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  262,296      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 416,573      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      986      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,533      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  285,852      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 359,842      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,073      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,326      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  303,379      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 367,222      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,008      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,156      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  273,487      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 425,449      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      932      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,367      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  297,596      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 414,793      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,140      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,601      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  342,365      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 360,422      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,291      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,342      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  327,196      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 580,858      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,122      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,014      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  296,564      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 452,817      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,087      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,694      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  375,002      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 389,393      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,478      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,540      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  365,213      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 594,685      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,401      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,222      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0            1,000,749,060 ns   duration_time

         1.000749060 seconds time elapsed
  ```

After:

  ```
   Performance counter stats for 'system wide':

  CPU0               20,547,434      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36              45,202,862      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                   82,001      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                 159,688      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0            1,000,464,828 ns   duration_time

         1.000464828 seconds time elapsed
  ```

Fixes: 3cdc5c2cb924acb4 ("perf parse-events: Handle uncore event aliases in small groups properly")
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Asaf Yaffe <asaf.yaffe@intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220205010941.1065469-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Apply correct label to user/kernel symbols in branch mode

In branch mode, the branch symbols were being displayed with incorrect
cpumode labels. So fix this.

For example, before:
  # perf record -b -a -- sleep 1
  # perf report -b

  Overhead  Command  Source Shared Object  Source Symbol               Target Symbol
     0.08%  swapper  [kernel.kallsyms]     [k] rcu_idle_enter          [k] cpuidle_enter_state
 ==> 0.08%  cmd0     [kernel.kallsyms]     [.] psi_group_change        [.] psi_group_change
     0.08%  cmd1     [kernel.kallsyms]     [k] psi_group_change        [k] psi_group_change

After:
  # perf report -b

  Overhead  Command  Source Shared Object  Source Symbol               Target Symbol
     0.08%  swapper  [kernel.kallsyms]     [k] rcu_idle_enter          [k] cpuidle_enter_state
     0.08%  cmd0     [kernel.kallsyms]     [k] psi_group_change        [k] pei_group_change
     0.08%  cmd1     [kernel.kallsyms]     [k] psi_group_change        [k] psi_group_change

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220126105927.3411216-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bpf: Fix a typo in bpf_counter_cgroup.c

This patch fixes a spelling typo in error message.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211225005558.503935-1-standby24x7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf synthetic-events: Return error if procfs isn't mounted for PID namespaces

For perf recording, it retrieves process info by iterating nodes in proc
fs.  If we run perf in a non-root PID namespace with command:

  # unshare --fork --pid perf record -e cycles -a -- test_program

... in this case, unshare command creates a child PID namespace and
launches perf tool in it, but the issue is the proc fs is not mounted
for the non-root PID namespace, this leads to the perf tool gathering
process info from its parent PID namespace.

We can use below command to observe the process nodes under proc fs:

  # unshare --pid --fork ls /proc
1    137   1968  2128  3    342  48  62   78      crypto   kcore        net       uptime
10   138   2  2142  30   35  49  63   8      devices   keys        pagetypeinfo   version
11   139   20  2143  304  36  50  64   82      device-tree  key-users    partitions     vmallocinfo
12   14    2011  22    305  37  51  65   83      diskstats   kmsg        self       vmstat
128  140   2038  23    307  39  52  656  84      driver   kpagecgroup  slabinfo       zoneinfo
129  15    2074  24    309  4  53  67   9      execdomains  kpagecount   softirqs
13   16    2094  241   31   40  54  68   asound     fb   kpageflags   stat
130  164   2096  242   310  41  55  69   buddyinfo  filesystems  loadavg      swaps
131  17    2098  25    317  42  56  70   bus      fs   locks        sys
132  175   21  26    32   43  57  71   cgroups    interrupts   meminfo      sysrq-trigger
133  179   2102  263   329  44  58  75   cmdline    iomem   misc        sysvipc
134  1875  2103  27    330  45  59  76   config.gz  ioports   modules      thread-self
135  19    2117  29    333  46  6   77   consoles   irq   mounts       timer_list
136  1941  2121  298   34   47  60  773  cpuinfo    kallsyms   mtd        tty

So it shows many existed tasks, since unshared command has not mounted
the proc fs for the new created PID namespace, it still accesses the
proc fs of the root PID namespace.  This leads to two prominent issues:

- Firstly, PID values are mismatched between thread info and samples.
  The gathered thread info are coming from the proc fs of the root PID
  namespace, but samples record its PID from the child PID namespace.

- The second issue is profiled program 'test_program' returns its forked
  PID number from the child PID namespace, perf tool wrongly uses this
  PID number to retrieve the process info via the proc fs of the root
  PID namespace.

To avoid issues, we need to mount proc fs for the child PID namespace
with the option '--mount-proc' when use unshare command:

  # unshare --fork --pid --mount-proc perf record -e cycles -a -- test_program

Conversely, when the proc fs of the root PID namespace is used by child
namespace, perf tool can detect the multiple PID levels and
nsinfo__is_in_root_namespace() returns false, this patch reports error
for this case:

  # unshare --fork --pid perf record -e cycles -a -- test_program
  Couldn't synthesize bpf events.
  Perf runs in non-root PID namespace but it tries to gather process info from its parent PID namespace.
  Please mount the proc file system properly, e.g. add the option '--mount-proc' for unshare command.

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20211224124014.2492751-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf session: Check for NULL pointer before dereference

Move NULL pointer check before dereferencing the variable.

Addresses-Coverity: 1497622 ("Derereference before null check")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: https://lore.kernel.org/r/20220125121141.18347-1-amhamza.mgc@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf annotate: Set error stream of objdump process for TUI

The stderr should be set to a pipe when using TUI.  Otherwise it'd
print to stdout and break TUI windows with an error message.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220202070828.143303-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add missing branch_sample_type to perf_event_attr__fprintf()

This updates branch sample type with missing PERF_SAMPLE_BRANCH_TYPE_SAVE.

Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/1643799443-15109-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync linux/kvm.h with the kernel sources

To pick the changes in:

  f6c6804c43fa18d3 ("kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h")

That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.

This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
  diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h

Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Yf+4k5Fs5Q3HdSG9@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge remote-tracking branch 'torvalds/master' into perf/urgent

To check if more kernel API sync is needed and also to see if the perf
build tests continue to pass.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

net/smc: fix ref_tracker issue in smc_pnet_add()

I added the netdev_tracker_alloc() right after ndev was
stored into the newly allocated object:

  new_pe->ndev = ndev;
  if (ndev)
      netdev_tracker_alloc(ndev, &new_pe->dev_tracker, GFP_KERNEL);

But I missed that later, we could end up freeing new_pe,
then calling dev_put(ndev) to release the reference on ndev.

The new_pe->dev_tracker would not be freed.

To solve this issue, move the netdev_tracker_alloc() call to
the point we know for sure new_pe will be kept.

syzbot report (on net-next tree, but the bug is present in net tree)
WARNING: CPU: 0 PID: 6019 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 6019 Comm: syz-executor.3 Not tainted 5.17.0-rc2-syzkaller-00650-g5a8fb33e5305 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d f4 70 a0 09 31 ff 89 de e8 4d bc 99 fd 84 db 75 e0 e8 64 b8 99 fd 48 c7 c7 20 0c 06 8a c6 05 d4 70 a0 09 01 e8 9e 4e 28 05 <0f> 0b eb c4 e8 48 b8 99 fd 0f b6 1d c3 70 a0 09 31 ff 89 de e8 18
RSP: 0018:ffffc900043b7400 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815fb318 RDI: fffff52000876e72
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815f507e R11: 0000000000000000 R12: 1ffff92000876e85
R13: 0000000000000000 R14: ffff88805c1c6600 R15: 0000000000000000
FS:  00007f1ef6feb700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2d02b000 CR3: 00000000223f4000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __refcount_dec include/linux/refcount.h:344 [inline]
 refcount_dec include/linux/refcount.h:359 [inline]
 ref_tracker_free+0x53f/0x6c0 lib/ref_tracker.c:119
 netdev_tracker_free include/linux/netdevice.h:3867 [inline]
 dev_put_track include/linux/netdevice.h:3884 [inline]
 dev_put_track include/linux/netdevice.h:3880 [inline]
 dev_put include/linux/netdevice.h:3910 [inline]
 smc_pnet_add_eth net/smc/smc_pnet.c:399 [inline]
 smc_pnet_enter net/smc/smc_pnet.c:493 [inline]
 smc_pnet_add+0x5fc/0x15f0 net/smc/smc_pnet.c:556
 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731
 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
 genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:725
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: b60645248af3 ("net/smc: add net device tracker to struct smc_pnetentry")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYs

When setting up autonegotiation for 88E1118R and compatible PHYs,
a software reset of PHY is issued before setting up polarity.
This is incorrect as changes of MDI Crossover Mode bits are
disruptive to the normal operation and must be followed by a
software reset to take effect. Let's patch m88e1118_config_aneg()
to fix the issue mentioned before by invoking software reset
of the PHY just after setting up MDI-x polarity.

Fixes: 605f196efbf8 ("phy: Add support for Marvell 88E1118 PHY")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drm/panel: simple: Assign data from panel_dpi_probe() correctly

In the function panel_simple_probe() the pointer panel->desc is
assigned to the passed pointer desc. If function panel_dpi_probe()
is called panel->desc will be updated, but further on only desc
will be evaluated. So update the desc pointer to be able to use
the data from the function panel_dpi_probe().

Fixes: 4a1d0dbc8332 ("drm/panel: simple: add panel-dpi support")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com

Merge tag 'for-linus-5.17a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:

 - documentation fixes related to Xen

 - enable x2apic mode when available when running as hardware
   virtualized guest under Xen

 - cleanup and fix a corner case of vcpu enumeration when running a
   paravirtualized Xen guest

* tag 'for-linus-5.17a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/Xen: streamline (and fix) PV CPU enumeration
  xen: update missing ioctl magic numers documentation
  Improve docs for IOCTL_GNTDEV_MAP_GRANT_REF
  xen: xenbus_dev.h: delete incorrect file name
  xen/x2apic: enable x2apic mode when supported for HVM

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - A couple of fixes when handling an exception while a SError has
     been delivered

   - Workaround for Cortex-A510's single-step erratum

  RISC-V:

   - Make CY, TM, and IR counters accessible in VU mode

   - Fix SBI implementation version

  x86:

   - Report deprecation of x87 features in supported CPUID

   - Preparation for fixing an interrupt delivery race on AMD hardware

   - Sparse fix

  All except POWER and s390:

   - Rework guest entry code to correctly mark noinstr areas and fix
     vtime' accounting (for x86, this was already mostly correct but not
     entirely; for ARM, MIPS and RISC-V it wasn't)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Use ERR_PTR_USR() to return -EFAULT as a __user pointer
  KVM: x86: Report deprecated x87 features in supported CPUID
  KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata
  KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs
  KVM: arm64: Avoid consuming a stale esr value when SError occur
  RISC-V: KVM: Fix SBI implementation version
  RISC-V: KVM: make CY, TM, and IR counters accessible in VU mode
  kvm/riscv: rework guest entry logic
  kvm/arm64: rework guest entry logic
  kvm/x86: rework guest entry logic
  kvm/mips: rework guest entry logic
  kvm: add guest_state_{enter,exit}_irqoff()
  KVM: x86: Move delivery of non-APICv interrupt into vendor code
  kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h

Merge tag 'xfs-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
 "I was auditing operations in XFS that clear file privileges, and
  realized that XFS' fallocate implementation drops suid/sgid but
  doesn't clear file capabilities the same way that file writes and
  reflink do.

  There are VFS helpers that do it correctly, so refactor XFS to use
  them. I also noticed that we weren't flushing the log at the correct
  point in the fallocate operation, so that's fixed too.

  Summary:

   - Fix fallocate so that it drops all file privileges when files are
     modified instead of open-coding that incompletely.

   - Fix fallocate to flush the log if the caller wanted synchronous
     file updates"

* tag 'xfs-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: ensure log flush at the end of a synchronous fallocate call
  xfs: move xfs_update_prealloc_flags() to xfs_pnfs.c
  xfs: set prealloc flag in xfs_alloc_file_space()
  xfs: fallocate() should call file_modified()
  xfs: remove XFS_PREALLOC_SYNC
  xfs: reject crazy array sizes being fed to XFS_IOC_GETBMAP*

Merge tag 'vfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull vfs fixes from Darrick Wong:
 "I was auditing the sync_fs code paths recently and noticed that most
  callers of ->sync_fs ignore its return value (and many implementations
  never return nonzero even if the fs is broken!), which means that
  internal fs errors and corruption are not passed up to userspace
  callers of syncfs(2) or FIFREEZE. Hence fixing the common code and
  XFS, and I'll start working on the ext4/btrfs folks if this is merged.

  Summary:

   - Fix a bug where callers of ->sync_fs (e.g. sync_filesystem and
     syncfs(2)) ignore the return value.

   - Fix a bug where callers of sync_filesystem (e.g. fs freeze) ignore
     the return value.

   - Fix a bug in XFS where xfs_fs_sync_fs never passed back error
     returns"

* tag 'vfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: return errors in xfs_fs_sync_fs
  quota: make dquot_quota_sync return errors from ->sync_fs
  vfs: make sync_filesystem return errors from ->sync_fs
  vfs: make freeze_super abort when sync_filesystem returns error

Merge tag 'iomap-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull iomap fix from Darrick Wong:
 "A single bugfix for iomap.

  The fix should eliminate occasional complaints about stall warnings
  when a lot of writeback IO completes all at once and we have to then
  go clearing status on a large number of folios.

  Summary:

   - Limit the length of ioend chains in writeback so that we don't trip
     the softlockup watchdog and to limit long tail latency on clearing
     PageWriteback"

* tag 'iomap-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs, iomap: limit individual ioend chain lengths in writeback

net: mscc: ocelot: fix all IP traffic getting trapped to CPU with PTP over IP

The filters for the PTP trap keys are incorrectly configured, in the
sense that is2_entry_set() only looks at trap->key.ipv4.dport or
trap->key.ipv6.dport if trap->key.ipv4.proto or trap->key.ipv6.proto is
set to IPPROTO_TCP or IPPROTO_UDP.

But we don't do that, so is2_entry_set() goes through the "else" branch
of the IP protocol check, and ends up installing a rule for "Any IP
protocol match" (because msk is also 0). The UDP port is ignored.

This means that when we run "ptp4l -i swp0 -4", all IP traffic is
trapped to the CPU, which hinders bridging.

Fix this by specifying the IP protocol in the VCAP IS2 filters for PTP
over UDP.

Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'phy-fixes-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next

Vinod writes:

phy: fixes for 5.17

Fixes for bunch of drivers:
 - clk params for dphy
 - arg fix for mtk-tphy
 - refcount leak fix for stm32
 - bus width fix for zynqmp
 - sentinel fix ti
 - PHY_BRCM_USB Kconfig fix
 - clk fix for usb phy

* tag 'phy-fixes-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: dphy: Correct clk_pre parameter
  phy: phy-mtk-tphy: Fix duplicated argument in phy-mtk-tphy
  phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()
  phy: xilinx: zynqmp: Fix bus width setting for SGMII
  phy: cadence: Sierra: fix error handling bugs in probe()
  phy: ti: Fix missing sentinel for clk_div_table
  phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option
  phy: usb: Leave some clocks running during suspend

Merge tag 'kvmarm-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 5.17, take #2

- A couple of fixes when handling an exception while a SError has been
  delivered

- Workaround for Cortex-A510's single-step[ erratum

crypto: api - Move cryptomgr soft dependency into algapi

The soft dependency on cryptomgr is only needed in algapi because
if algapi isn't present then no algorithms can be loaded.  This
also fixes the case where api is built-in but algapi is built as
a module as the soft dependency would otherwise get lost.

Fixes: 8ab23d547f65 ("crypto: api - Add softdep on cryptomgr")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

tcp: take care of mixed splice()/sendmsg(MSG_ZEROCOPY) case

syzbot found that mixing sendpage() and sendmsg(MSG_ZEROCOPY)
calls over the same TCP socket would again trigger the
infamous warning in inet_sock_destruct()

WARN_ON(sk_forward_alloc_get(sk));

While Talal took into account a mix of regular copied data
and MSG_ZEROCOPY one in the same skb, the sendpage() path
has been forgotten.

We want the charging to happen for sendpage(), because
pages could be coming from a pipe. What is missing is the
downgrading of pure zerocopy status to make sure
sk_forward_alloc will stay synced.

Add tcp_downgrade_zcopy_pure() helper so that we can
use it from the two callers.

Fixes: 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Talal Ahmad <talalahmad@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20220203225547.665114-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "Some medium sized bugs in the various drivers. A couple are more
  recent regressions:

   - Fix two panics in hfi1 and two allocation problems

   - Send the IGMP to the correct address in cma

   - Squash a syzkaller bug related to races reading the multicast list

   - Memory leak in siw and cm

   - Fix a corner case spec compliance for HFI/QIB

   - Correct the implementation of fences in siw

   - Error unwind bug in mlx4"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/mlx4: Don't continue event handler after memory allocation failure
  RDMA/siw: Fix broken RDMA Read Fence/Resume logic.
  IB/rdmavt: Validate remote_addr during loopback atomic tests
  IB/cm: Release previously acquired reference counter in the cm_id_priv
  RDMA/siw: Fix refcounting leak in siw_create_qp()
  RDMA/ucma: Protect mc during concurrent multicast leaves
  RDMA/cma: Use correct address when leaving multicast group
  IB/hfi1: Fix tstats alloc and dealloc
  IB/hfi1: Fix AIP early init panic
  IB/hfi1: Fix alloc failure with larger txqueuelen
  IB/hfi1: Fix panic with larger ipoib send_queue_size

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Seven fixes, six of which are fairly obvious driver fixes.

  The one core change to the device budget depth is to try to ensure
  that if the default depth is large (which can produce quite a sizeable
  bitmap allocation per device), we give back the memory we don't need
  if there's a queue size reduction in slave_configure (which happens to
  a lot of devices)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: hisi_sas: Fix setting of hisi_sas_slot.is_internal
  scsi: pm8001: Fix use-after-free for aborted SSP/STP sas_task
  scsi: pm8001: Fix use-after-free for aborted TMF sas_task
  scsi: pm8001: Fix warning for undescribed param in process_one_iomb()
  scsi: core: Reallocate device's budget map on queue depth change
  scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe
  scsi: pm80xx: Fix double completion for SATA devices

Merge tag 'pci-v5.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci fixes from Bjorn Helgaas:

 - Restructure j721e_pcie_probe() so we don't dereference a NULL pointer
   (Bjorn Helgaas)

 - Add a kirin_pcie_data struct to identify different Kirin variants to
   fix probe failure for controllers with an internal PHY (Bjorn
   Helgaas)

* tag 'pci-v5.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: kirin: Add dev struct for of_device_get_match_data()
  PCI: j721e: Initialize pcie->cdns_pcie before using it

riscv/mm: Add XIP_FIXUP for riscv_pfn_base

This manifests as a crash early in boot on VexRiscv.

Signed-off-by: Myrtle Shah <gatecat@ds0.me>
[Palmer: split commit]
Fixes: 44c922572952 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv/mm: Add XIP_FIXUP for phys_ram_base

This manifests as a crash early in boot on VexRiscv.

Signed-off-by: Myrtle Shah <gatecat@ds0.me>
[Palmer: split commit]
Fixes: 6d7f91d914bc ("riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

PCI: kirin: Add dev struct for of_device_get_match_data()

Bean reported that a622435fbe1a ("PCI: kirin: Prefer
of_device_get_match_data()") broke kirin_pcie_probe() because it assumed
match data of 0 was a failure when in fact, it meant the match data was
"(void *)PCIE_KIRIN_INTERNAL_PHY".

Therefore, probing of "hisilicon,kirin960-pcie" devices failed with -EINVAL
and an "OF data missing" message.

Add a struct kirin_pcie_data to encode the PHY type.  Then the result of
of_device_get_match_data() should always be a non-NULL pointer to a struct
kirin_pcie_data that contains the PHY type.

Fixes: a622435fbe1a ("PCI: kirin: Prefer of_device_get_match_data()")
Link: https://lore.kernel.org/r/20220202162659.GA12603@bhelgaas
Link: https://lore.kernel.org/r/20220201215941.1203155-1-huobean@gmail.com
Reported-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Merge tag 'for-5.17-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "A few fixes and error handling improvements:

   - fix deadlock between quota disable and qgroup rescan worker

   - fix use-after-free after failure to create a snapshot

   - skip warning on unmount after log cleanup failure

   - don't start transaction for scrub if the fs is mounted read-only

   - tree checker verifies item sizes"

* tag 'for-5.17-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: skip reserved bytes warning on unmount after log cleanup failure
  btrfs: fix use of uninitialized variable at rm device ioctl
  btrfs: fix use-after-free after failure to create a snapshot
  btrfs: tree-checker: check item_size for dev_item
  btrfs: tree-checker: check item_size for inode_item
  btrfs: fix deadlock between quota disable and qgroup rescan worker
  btrfs: don't start transaction for scrub if the fs is mounted read-only

selftests/ir: fix build with ancient kernel headers

Since commit e2bcbd7769ee ("tools headers UAPI: remove stale lirc.h"),
the build of the selftests fails on rhel 8 since its version of
/usr/include/linux/lirc.h has no definition of RC_PROTO_RCMM32, etc [1].

[1] https://lkml.org/lkml/2022/1/28/275

Fixes: e2bcbd7769ee ("tools headers UAPI: remove stale lirc.h")
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Merge tag 'erofs-for-5.17-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:
 "Two fixes related to fsdax cleanup in this cycle and ztailpacking to
  fix small compressed data inlining. There is also a trivial cleanup to
  rearrange code for better reading.

  Summary:

   - fix fsdax partition offset misbehavior

   - clean up z_erofs_decompressqueue_work() declaration

   - fix up EOF lcluster inlining, especially for small compressed data"

* tag 'erofs-for-5.17-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix small compressed files inlining
  erofs: avoid unnecessary z_erofs_decompressqueue_work() declaration
  erofs: fix fsdax partition offset handling

selftests: fixup build warnings in pidfd / clone3 tests

These are some trivial fixups, which were needed to build the tests with
clang and -Werror. The following issues are fixed:

- Remove various unused variables.
- In child_poll_leader_exit_test, clang isn't smart enough to realize
  syscall(SYS_exit, 0) won't return, so it complains we never return
  from a non-void function. Add an extra exit(0) to appease it.
- In test_pidfd_poll_leader_exit, ret may be branched on despite being
  uninitialized, if we have !use_waitpid. Initialize it to zero to get
  the right behavior in that case.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

pidfd: fix test failure due to stack overflow on some arches

When running the pidfd_fdinfo_test on arm64, it fails for me. After some
digging, the reason is that the child exits due to SIGBUS, because it
overflows the 1024 byte stack we've reserved for it.

To fix the issue, increase the stack size to 8192 bytes (this number is
somewhat arbitrary, and was arrived at through experimentation -- I kept
doubling until the failure no longer occurred).

Also, let's make the issue easier to debug. wait_for_pid() returns an
ambiguous value: it may return -1 in all of these cases:

1. waitpid() itself returned -1
2. waitpid() returned success, but we found !WIFEXITED(status).
3. The child process exited, but it did so with a -1 exit code.

There's no way for the caller to tell the difference. So, at least log
which occurred, so the test runner can debug things.

While debugging this, I found that we had !WIFEXITED(), because the
child exited due to a signal. This seems like a reasonably common case,
so also print out whether or not we have WIFSIGNALED(), and the
associated WTERMSIG() (if any). This lets us see the SIGBUS I'm fixing
clearly when it occurs.

Finally, I'm suspicious of allocating the child's stack on our stack.
man clone(2) suggests that the correct way to do this is with mmap(),
and in particular by setting MAP_STACK. So, switch to doing it that way
instead.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Merge tag 'block-5.17-2022-02-04' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe pull request
    - fix use-after-free in rdma and tcp controller reset (Sagi Grimberg)
    - fix the state check in nvmf_ctlr_matches_baseopts (Uday Shankar)

 - MD nowait null pointer fix (Song)

 - blk-integrity seed advance fix (Martin)

 - Fix a dio regression in this merge window (Ilya)

* tag 'block-5.17-2022-02-04' of git://git.kernel.dk/linux-block:
  block: bio-integrity: Advance seed correctly for larger interval sizes
  nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts()
  md: fix NULL pointer deref with nowait but no mddev->queue
  block: fix DIO handling regressions in blkdev_read_iter()
  nvme-rdma: fix possible use-after-free in transport error_recovery work
  nvme-tcp: fix possible use-after-free in transport error_recovery work
  nvme: fix a possible use-after-free in controller reset during load

Merge tag 'ata-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ATA fixes from Damien Le Moal:

 - Sergey volunteered to be a reviewer for the Renesas R-Car SATA driver
   and PATA drivers. Update the MAINTAINERS file accordingly.

 - Regression fix: add a horkage flag to prevent accessing the log
   directory log page with SATADOM-ML 3ME SATA devices as they react
   badly to reading that log page (from Anton).

* tag 'ata-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-core: Introduce ATA_HORKAGE_NO_LOG_DIR horkage
  MAINTAINERS: add myself as Renesas R-Car SATA driver reviewer
  MAINTAINERS: add myself as PATA drivers reviewer

Merge tag 'iommu-fixes-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

 - Warning fixes and a fix for a potential use-after-free in IOMMU core
   code

 - Another potential memory leak fix for the Intel VT-d driver

 - Fix for an IO polling loop timeout issue in the AMD IOMMU driver

* tag 'iommu-fixes-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()
  iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()
  iommu: Fix some W=1 warnings
  iommu: Fix potential use-after-free during probe

Merge tag 'random-5.17-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random

Pull random number generator fixes from Jason Donenfeld:
 "For this week, we have:

   - A fix to make more frequent use of hwgenerator randomness, from
     Dominik.

   - More cleanups to the boot initialization sequence, from Dominik.

   - A fix for an old shortcoming with the ZAP ioctl, from me.

   - A workaround for a still unfixed Clang CFI/FullLTO compiler bug,
     from me. On one hand, it's a bummer to commit workarounds for
     experimental compiler features that have bugs. But on the other, I
     think this actually improves the code somewhat, independent of the
     bug. So a win-win"

* tag 'random-5.17-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: only call crng_finalize_init() for primary_crng
  random: access primary_pool directly rather than through pointer
  random: wake up /dev/random writers after zap
  random: continually use hwgenerator randomness
  lib/crypto: blake2s: avoid indirect calls to compression function for Clang CFI

Merge tag 'acpi-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "Fix compilation in the case when ACPI is selected and CRC32, depended
  on by ACPI after recent changes, is not (Randy Dunlap)"

* tag 'acpi-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: require CRC32 to build

Merge tag 'sound-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes.

  The major changes are ASoC core fixes, addressing the DPCM locking
  issue after the recent code changes and the potentially invalid
  register accesses via control API. Also, HD-audio got a core fix for
  Oops at dynamic unbinding.

  The rest are device-specific small fixes, including the usual stuff
  like HD-audio and USB-audio quirks"

* tag 'sound-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (31 commits)
  ALSA: hda: Skip codec shutdown in case the codec is not registered
  ALSA: usb-audio: Correct quirk for VF0770
  ALSA: Replace acpi_bus_get_device()
  Input: wm97xx: Simplify resource management
  ALSA: hda/realtek: Add quirk for ASUS GU603
  ALSA: hda/realtek: Fix silent output on Gigabyte X570 Aorus Xtreme after reboot from Windows
  ALSA: hda/realtek: Fix silent output on Gigabyte X570S Aorus Master (newer chipset)
  ALSA: hda/realtek: Add missing fixup-model entry for Gigabyte X570 ALC1220 quirks
  ALSA: hda: realtek: Fix race at concurrent COEF updates
  ASoC: ops: Check for negative values before reading them
  ASoC: rt5682: Fix deadlock on resume
  ASoC: hdmi-codec: Fix OOB memory accesses
  ASoC: soc-pcm: Move debugfs removal out of spinlock
  ASoC: soc-pcm: Fix DPCM lockdep warning due to nested stream locks
  ASoC: fsl: Add missing error handling in pcm030_fabric_probe
  ALSA: hda: Fix signedness of sscanf() arguments
  ALSA: usb-audio: initialize variables that could ignore errors
  ALSA: hda: Fix UAF of leds class devs at unbinding
  ASoC: qdsp6: q6apm-dai: only stop graphs that are started
  ASoC: codecs: wcd938x: fix return value of mixer put function
  ...

Merge tag 'drm-fixes-2022-02-04' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Regular fixes for the week. Daniel has agreed to bring back the fbcon
  hw acceleration under a CONFIG option for the non-drm fbdev users, we
  don't advise turning this on unless you are in the niche that is old
  fbdev drivers, Since it's essentially a revert and shouldn't be high
  impact seemed like a good time to do it now.

  Otherwise, i915 and amdgpu fixes are most of it, along with some minor
  fixes elsewhere.

  fbdev:
   - readd fbcon acceleration

  i915:
   - fix DP monitor via type-c dock
   - fix for engine busyness and read timeout with GuC
   - use ALLOW_FAIL for error capture buffer allocs
   - don't use interruptible lock on error paths
   - smatch fix to reject zero sized overlays.

  amdgpu:
   - mGPU fan boost fix for beige goby
   - S0ix fixes
   - Cyan skillfish hang fix
   - DCN fixes for DCN 3.1
   - DCN fixes for DCN 3.01
   - Apple retina panel fix
   - ttm logic inversion fix

  dma-buf:
   - heaps: fix potential spectre v1 gadget

  kmb:
   - fix potential oob access

  mxsfb:
   - fix NULL ptr deref

  nouveau:
   - fix potential oob access during BIOS decode"

* tag 'drm-fixes-2022-02-04' of git://anongit.freedesktop.org/drm/drm: (24 commits)
  drm: mxsfb: Fix NULL pointer dereference
  drm/amdgpu: fix logic inversion in check
  drm/amd: avoid suspend on dGPUs w/ s2idle support when runtime PM enabled
  drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels
  drm/amd/display: revert "Reset fifo after enable otg"
  drm/amd/display: watermark latencies is not enough on DCN31
  drm/amd/display: Update watermark values for DCN301
  drm/amdgpu: fix a potential GPU hang on cyan skillfish
  drm/amd: Only run s3 or s0ix if system is configured properly
  drm/amd: add support to check whether the system is set to s3
  fbcon: Add option to enable legacy hardware acceleration
  Revert "fbcon: Disable accelerated scrolling"
  Revert "fbdev: Garbage collect fbdev scrolling acceleration, part 1 (from TODO list)"
  drm/i915/pmu: Fix KMD and GuC race on accessing busyness
  dma-buf: heaps: Fix potential spectre v1 gadget
  drm/amd: Warn users about potential s0ix problems
  drm/amd/pm: correct the MGpuFanBoost support for Beige Goby
  drm/nouveau: fix off by one in BIOS boundary checking
  drm/i915/adlp: Fix TypeC PHY-ready status readout
  drm/i915/pmu: Use PM timestamp instead of RING TIMESTAMP for reference
  ...

riscv: Fix XIP_FIXUP_FLASH_OFFSET

There were several problems with the calculation. Not only was an 'and'
being computed into t1 but thrown away; but the 'and' itself would
cause problems if the granularity of the XIP physical address was less
than XIP_OFFSET - in my case I had the kernel image at 2MB in SPI flash.

Fixes: f9ace4ede49b ("riscv: remove .text section size limitation for XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Myrtle Shah <gatecat@ds0.me>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "10 patches.

  Subsystems affected by this patch series: ipc, MAINTAINERS, and mm
  (vmscan, debug, pagemap, kmemleak, and selftests)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kselftest/vm: revert "tools/testing/selftests/vm/userfaultfd.c: use swap() to make code cleaner"
  MAINTAINERS: update rppt's email
  mm/kmemleak: avoid scanning potential huge holes
  ipc/sem: do not sleep with a spin lock held
  mm/pgtable: define pte_index so that preprocessor could recognize it
  mm/page_table_check: check entries at pmd levels
  mm/khugepaged: unify collapse pmd clear, flush and free
  mm/page_table_check: use unsigned long for page counters and cleanup
  mm/debug_vm_pgtable: remove pte entry from the page table
  Revert "mm/page_isolation: unset migratetype directly for non Buddy page"

random: only call crng_finalize_init() for primary_crng

crng_finalize_init() returns instantly if it is called for another pool
than primary_crng. The test whether crng_finalize_init() is still required
can be moved to the relevant caller in crng_reseed(), and
crng_need_final_init can be reset to false if crng_finalize_init() is
called with workqueues ready. Then, no previous callsite will call
crng_finalize_init() unless it is needed, and we can get rid of the
superfluous function parameter.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

random: access primary_pool directly rather than through pointer

Both crng_initialize_primary() and crng_init_try_arch_early() are
only called for the primary_pool. Accessing it directly instead of
through a function parameter simplifies the code.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

random: wake up /dev/random writers after zap

When account() is called, and the amount of entropy dips below
random_write_wakeup_bits, we wake up the random writers, so that they
can write some more in. However, the RNDZAPENTCNT/RNDCLEARPOOL ioctl
sets the entropy count to zero -- a potential reduction just like
account() -- but does not unblock writers. This commit adds the missing
logic to that ioctl to unblock waiting writers.

Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

random: continually use hwgenerator randomness

The rngd kernel thread may sleep indefinitely if the entropy count is
kept above random_write_wakeup_bits by other entropy sources. To make
best use of multiple sources of randomness, mix entropy from hardware
RNGs into the pool at least once within CRNG_RESEED_INTERVAL.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

lib/crypto: blake2s: avoid indirect calls to compression function for Clang CFI

blake2s_compress_generic is weakly aliased by blake2s_compress. The
current harness for function selection uses a function pointer, which is
ordinarily inlined and resolved at compile time. But when Clang's CFI is
enabled, CFI still triggers when making an indirect call via a weak
symbol. This seems like a bug in Clang's CFI, as though it's bucketing
weak symbols and strong symbols differently. It also only seems to
trigger when "full LTO" mode is used, rather than "thin LTO".

[    0.000000][    T0] Kernel panic - not syncing: CFI failure (target: blake2s_compress_generic+0x0/0x1444)
[    0.000000][    T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-mainline-06981-g076c855b846e #1
[    0.000000][    T0] Hardware name: MT6873 (DT)
[    0.000000][    T0] Call trace:
[    0.000000][    T0]  dump_backtrace+0xfc/0x1dc
[    0.000000][    T0]  dump_stack_lvl+0xa8/0x11c
[    0.000000][    T0]  panic+0x194/0x464
[    0.000000][    T0]  __cfi_check_fail+0x54/0x58
[    0.000000][    T0]  __cfi_slowpath_diag+0x354/0x4b0
[    0.000000][    T0]  blake2s_update+0x14c/0x178
[    0.000000][    T0]  _extract_entropy+0xf4/0x29c
[    0.000000][    T0]  crng_initialize_primary+0x24/0x94
[    0.000000][    T0]  rand_initialize+0x2c/0x6c
[    0.000000][    T0]  start_kernel+0x2f8/0x65c
[    0.000000][    T0]  __primary_switched+0xc4/0x7be4
[    0.000000][    T0] Rebooting in 5 seconds..

Nonetheless, the function pointer method isn't so terrific anyway, so
this patch replaces it with a simple boolean, which also gets inlined
away. This successfully works around the Clang bug.

In general, I'm not too keen on all of the indirection involved here; it
clearly does more harm than good. Hopefully the whole thing can get
cleaned up down the road when lib/crypto is overhauled more
comprehensively. But for now, we go with a simple bandaid.

Fixes: 6048fdcc5f26 ("lib/crypto: blake2s: include as built-in")
Link: https://github.com/ClangBuiltLinux/linux/issues/1567
Reported-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

riscv: eliminate unreliable __builtin_frame_address(1)

I tried different pieces of code which uses __builtin_frame_address(1)
(with both gcc version 7.5.0 and 10.3.0) to verify whether it works as
expected on riscv64. The result is negative.

What the compiler had generated is as below:
31                      fp = (unsigned long)__builtin_frame_address(1);
   0xffffffff80006024 <+200>:   ld      s1,0(s0)

It takes '0(s0)' as the address of frame 1 (caller), but the actual address
should be '-16(s0)'.

          |       ...       | <-+
          +-----------------+   |
          | return address  |   |
          | previous fp     |   |
          | saved registers |   |
          | local variables |   |
  $fp --> |       ...       |   |
          +-----------------+   |
          | return address  |   |
          | previous fp --------+
          | saved registers |
  $sp --> | local variables |
          +-----------------+

This leads the kernel can not dump the full stack trace on riscv.

[    7.222126][    T1] Call Trace:
[    7.222804][    T1] [<ffffffff80006058>] dump_backtrace+0x2c/0x3a

This problem is not exposed on most riscv builds just because the '0(s0)'
occasionally is the address frame 2 (caller's caller), if only ra and fp
are stored in frame 1 (caller).

          |       ...       | <-+
          +-----------------+   |
          | return address  |   |
  $fp --> | previous fp     |   |
          +-----------------+   |
          | return address  |   |
          | previous fp --------+
          | saved registers |
  $sp --> | local variables |
          +-----------------+

This could be a *bug* of gcc that should be fixed. But as noted in gcc
manual "Calling this function with a nonzero argument can have
unpredictable effects, including crashing the calling program.", let's
remove the '__builtin_frame_address(1)' in backtrace code.

With this fix now it can show full stack trace:
[   10.444838][    T1] Call Trace:
[   10.446199][    T1] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[   10.447711][    T1] [<ffffffff800060ac>] show_stack+0x32/0x3e
[   10.448710][    T1] [<ffffffff80a005c0>] dump_stack_lvl+0x58/0x7a
[   10.449941][    T1] [<ffffffff80a005f6>] dump_stack+0x14/0x1c
[   10.450929][    T1] [<ffffffff804c04ee>] ubsan_epilogue+0x10/0x5a
[   10.451869][    T1] [<ffffffff804c092e>] __ubsan_handle_load_invalid_value+0x6c/0x78
[   10.453049][    T1] [<ffffffff8018f834>] __pagevec_release+0x62/0x64
[   10.455476][    T1] [<ffffffff80190830>] truncate_inode_pages_range+0x132/0x5be
[   10.456798][    T1] [<ffffffff80190ce0>] truncate_inode_pages+0x24/0x30
[   10.457853][    T1] [<ffffffff8045bb04>] kill_bdev+0x32/0x3c
...

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Fixes: eac2f3059e02 ("riscv: stacktrace: fix the riscv stacktrace when CONFIG_FRAME_POINTER enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge tag 'ceph-for-5.17-rc3' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
 "A patch to make it possible to disable zero copy path in the messenger
  to avoid checksum or authentication tag mismatches and ensuing session
  resets in case the destination buffer isn't guaranteed to be stable"

* tag 'ceph-for-5.17-rc3' of git://github.com/ceph/ceph-client:
  libceph: optionally use bounce buffer on recv path in crc mode
  libceph: make recv path in secure mode work the same as send path

Merge tag '9p-for-5.17-rc3' of git://github.com/martinetd/linux

Pull 9p fix from Dominique Martinet:
 "Fix 'cannot walk open fid' rule

  The 9p 'walk' operation requires fid arguments to not originate from
  an open or create call and we've missed that for a while as the
  servers regularly running tests with don't enforce the check and no
  active reviewer knew about the rule.

  Both reporters confirmed reverting this patch fixes things for them
  and looking at it further wasn't actually required... Will take more
  time for follow up and enforcing the rule more thoroughly later"

* tag '9p-for-5.17-rc3' of git://github.com/martinetd/linux:
  Revert "fs/9p: search open fids first"

rtla/trace: Error message fixup

Use capital and change "tracer %s" to "%s tracer".

No functional change.

Link: https://lkml.kernel.org/r/361697d27431afefa64c67c323564205385c418d.1643990447.git.bristot@kernel.org
Fixes: b1696371d865 ("rtla: Helper functions for rtla")
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

rtla/utils: Fix session duration parsing

Use gmtime to format the duration time. This avoids problems when the
system uses local time different of Pisa's Local Time.

Link: https://lkml.kernel.org/r/a2f0a37bc006c2561bb8ecd871cd70532b4a9f2d.1643990447.git.bristot@kernel.org
Fixes: b1696371d865 ("rtla: Helper functions for rtla")
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

rtla: Follow kernel version

To avoid having commits with new version, it is just easier to follow
kernel version.

Link: https://lkml.kernel.org/r/9c2df0d1de65cea96c7d731fe64781a2bb90c5b3.1643990447.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge tag '5.17-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "SMB3 client fixes including:

   - multiple fscache related fixes, reenabling ability to read/write to
     cached files for cifs.ko (that was temporarily disabled for cifs.ko
     a few weeks ago due to the recent fscache changes)

   - also includes a new fscache helper function ("query_occupancy")
     used by above

   - fix for multiuser mounts and NTLMSSP auth (workstation name) for
     stable

   - fix locking ordering problem in multichannel code

   - trivial malformed comment fix"

* tag '5.17-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix workstation_name for multiuser mounts
  Invalidate fscache cookie only when inode attributes are changed.
  cifs: Fix the readahead conversion to manage the batch when reading from cache
  cifs: Implement cache I/O by accessing the cache directly
  netfs, cachefiles: Add a method to query presence of data in the cache
  cifs: Transition from ->readpages() to ->readahead()
  cifs: unlock chan_lock before calling cifs_put_tcp_session
  Fix a warning about a malformed kernel doc comment in cifs

kselftest/vm: revert "tools/testing/selftests/vm/userfaultfd.c: use swap() to make code cleaner"

With this change, userfaultfd fails to build with undefined reference
swap() error:

  userfaultfd.c: In function `userfaultfd_stress':
  userfaultfd.c:1530:17: warning: implicit declaration of function `swap'; did you mean `swab'? [-Wimplicit-function-declaration]
   1530 |                 swap(area_src, area_dst);
        |                 ^~~~
        |                 swab
  /usr/bin/ld: /tmp/ccDGOAdV.o: in function `userfaultfd_stress':
  userfaultfd.c:(.text+0x549e): undefined reference to `swap'
  /usr/bin/ld: userfaultfd.c:(.text+0x54bc): undefined reference to `swap'
  collect2: error: ld returned 1 exit status

Revert the commit to fix the problem.

Link: https://lkml.kernel.org/r/20220202003340.87195-1-skhan@linuxfoundation.org
Fixes: 2c769ed7137a ("tools/testing/selftests/vm/userfaultfd.c: use swap() to make code cleaner")
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update rppt's email

Use my @kernel.org address

Link: https://lkml.kernel.org/r/20220203090324.3701774-1-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/kmemleak: avoid scanning potential huge holes

When using devm_request_free_mem_region() and devm_memremap_pages() to
add ZONE_DEVICE memory, if requested free mem region's end pfn were
huge(e.g., 0x400000000), the node_end_pfn() will be also huge (see
move_pfn_range_to_zone()).  Thus it creates a huge hole between
node_start_pfn() and node_end_pfn().

We found on some AMD APUs, amdkfd requested such a free mem region and
created a huge hole.  In such a case, following code snippet was just
doing busy test_bit() looping on the huge hole.

  for (pfn = start_pfn; pfn < end_pfn; pfn++) {
struct page *page = pfn_to_online_page(pfn);
if (!page)
continue;
...
  }

So we got a soft lockup:

  watchdog: BUG: soft lockup - CPU#6 stuck for 26s! [bash:1221]
  CPU: 6 PID: 1221 Comm: bash Not tainted 5.15.0-custom #1
  RIP: 0010:pfn_to_online_page+0x5/0xd0
  Call Trace:
    ? kmemleak_scan+0x16a/0x440
    kmemleak_write+0x306/0x3a0
    ? common_file_perm+0x72/0x170
    full_proxy_write+0x5c/0x90
    vfs_write+0xb9/0x260
    ksys_write+0x67/0xe0
    __x64_sys_write+0x1a/0x20
    do_syscall_64+0x3b/0xc0
    entry_SYSCALL_64_after_hwframe+0x44/0xae

I did some tests with the patch.

(1) amdgpu module unloaded

before the patch:

  real    0m0.976s
  user    0m0.000s
  sys     0m0.968s

after the patch:

  real    0m0.981s
  user    0m0.000s
  sys     0m0.973s

(2) amdgpu module loaded

before the patch:

  real    0m35.365s
  user    0m0.000s
  sys     0m35.354s

after the patch:

  real    0m1.049s
  user    0m0.000s
  sys     0m1.042s

Link: https://lkml.kernel.org/r/20211108140029.721144-1-lang.yu@amd.com
Signed-off-by: Lang Yu <lang.yu@amd.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/sem: do not sleep with a spin lock held

We can't call kvfree() with a spin lock held, so defer it.

Link: https://lkml.kernel.org/r/20211223031207.556189-1-chi.minghao@zte.com.cn
Fixes: fc37a3b8b438 ("[PATCH] ipc sem: use kvmalloc for sem_undo allocation")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Yang Guang <cgel.zte@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/pgtable: define pte_index so that preprocessor could recognize it

Since commit 974b9b2c68f3 ("mm: consolidate pte_index() and
pte_offset_*() definitions") pte_index is a static inline and there is
no define for it that can be recognized by the preprocessor.  As a
result, vm_insert_pages() uses slower loop over vm_insert_page() instead
of insert_pages() that amortizes the cost of spinlock operations when
inserting multiple pages.

Link: https://lkml.kernel.org/r/20220111145457.20748-1-rppt@kernel.org
Fixes: 974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Christian Dietrich <stettberger@dokucode.de>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_table_check: check entries at pmd levels

syzbot detected a case where the page table counters were not properly
updated.

  syzkaller login:  ------------[ cut here ]------------
  kernel BUG at mm/page_table_check.c:162!
  invalid opcode: 0000 [#1] PREEMPT SMP KASAN
  CPU: 0 PID: 3099 Comm: pasha Not tainted 5.16.0+ #48
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIO4
  RIP: 0010:__page_table_check_zero+0x159/0x1a0
  Call Trace:
   free_pcp_prepare+0x3be/0xaa0
   free_unref_page+0x1c/0x650
   free_compound_page+0xec/0x130
   free_transhuge_page+0x1be/0x260
   __put_compound_page+0x90/0xd0
   release_pages+0x54c/0x1060
   __pagevec_release+0x7c/0x110
   shmem_undo_range+0x85e/0x1250
  ...

The repro involved having a huge page that is split due to uprobe event
temporarily replacing one of the pages in the huge page.  Later the huge
page was combined again, but the counters were off, as the PTE level was
not properly updated.

Make sure that when PMD is cleared and prior to freeing the level the
PTEs are updated.

Link: https://lkml.kernel.org/r/20220131203249.2832273-5-pasha.tatashin@soleen.com
Fixes: df4e817b7108 ("mm: page table check")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Paul Turner <pjt@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/khugepaged: unify collapse pmd clear, flush and free

Unify the code that flushes, clears pmd entry, and frees the PTE table
level into a new function collapse_and_free_pmd().

This cleanup is useful as in the next patch we will add another call to
this function to iterate through PTE prior to freeing the level for page
table check.

Link: https://lkml.kernel.org/r/20220131203249.2832273-4-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Paul Turner <pjt@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_table_check: use unsigned long for page counters and cleanup

For consistency, use "unsigned long" for all page counters.

Also, reduce code duplication by calling __page_table_check_*_clear()
from __page_table_check_*_set() functions.

Link: https://lkml.kernel.org/r/20220131203249.2832273-3-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Wei Xu <weixugc@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Paul Turner <pjt@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/debug_vm_pgtable: remove pte entry from the page table

Patch series "page table check fixes and cleanups", v5.

This patch (of 4):

The pte entry that is used in pte_advanced_tests() is never removed from
the page table at the end of the test.

The issue is detected by page_table_check, to repro compile kernel with
the following configs:

CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_PAGE_TABLE_CHECK=y
CONFIG_PAGE_TABLE_CHECK_ENFORCED=y

During the boot the following BUG is printed:

  debug_vm_pgtable: [debug_vm_pgtable         ]: Validating architecture page table helpers
  ------------[ cut here ]------------
  kernel BUG at mm/page_table_check.c:162!
  invalid opcode: 0000 [#1] PREEMPT SMP PTI
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.16.0-11413-g2c271fe77d52 #3
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
  ...

The entry should be properly removed from the page table before the page
is released to the free list.

Link: https://lkml.kernel.org/r/20220131203249.2832273-1-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20220131203249.2832273-2-pasha.tatashin@soleen.com
Fixes: a5c3b9ffb0f4 ("mm/debug_vm_pgtable: add tests validating advanced arch page table helpers")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org> [5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "mm/page_isolation: unset migratetype directly for non Buddy page"

This reverts commit 721fb891ad0b3956d5c168b2931e3e5e4fb7ca40.

Commit 721fb891ad0b ("mm/page_isolation: unset migratetype directly for
non Buddy page") will result memory that should in buddy disappear by
mistake.  move_freepages_block moves all pages in pageblock instead of
pages indicated by input parameter, so if input pages is not in buddy
but other pages in pageblock is in buddy, it will result in page out of
control.

Link: https://lkml.kernel.org/r/20220126024436.13921-1-chenwandun@huawei.com
Fixes: 721fb891ad0b ("mm/page_isolation: unset migratetype directly for non Buddy page")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Dong Aisheng <aisheng.dong@nxp.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Don't refresh timeout for SCTP flows in CLOSED state.

2) Don't allow access to transport header if fragment offset is set on.

3) Reinitialize internal conntrack state for retransmitted TCP
   syn-ack packet.

4) Update MAINTAINER file to add the Netfilter group tree. Moving
   forward, Florian Westphal has access to this tree so he can also
   send pull requests.

5) Set on IPS_HELPER for entries created via ctnetlink, otherwise NAT
   might zap it.

All patches from Florian Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: ctnetlink: disable helper autoassign
  MAINTAINERS: netfilter: update git links
  netfilter: conntrack: re-init state for retransmitted syn-ack
  netfilter: conntrack: move synack init code to helper
  netfilter: nft_payload: don't allow th access for fragments
  netfilter: conntrack: don't refresh sctp entries in closed state
====================

Link: https://lore.kernel.org/r/20220204151903.320786-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX

Commit effa453168a7 ("i2c: i801: Don't silently correct invalid transfer
size") revealed that ee1004_eeprom_read() did not properly limit how
many bytes to read at once.

In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the
length to read as an u8.  If count == 256 after taking into account the
offset and page boundary, the cast to u8 overflows.  And this is common
when user space tries to read the entire EEPROM at once.

To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already
the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows.

Fixes: effa453168a7 ("i2c: i801: Don't silently correct invalid transfer size")
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jonas Malaco <jonas@protocubo.io>
Link: https://lore.kernel.org/r/20220203165024.47767-1-jonas@protocubo.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt_ioctl: add array_index_nospec to VT_ACTIVATE

in vt_setactivate an almost identical code path has been patched
with array_index_nospec. In the VT_ACTIVATE path the user input
is from a system call argument instead of a usercopy.
For consistency both code paths should have the same mitigations
applied.

Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh
Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU
Amsterdam.

Co-developed-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220127144406.3589293-2-jakobkoschel@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt_ioctl: fix array_index_nospec in vt_setactivate

array_index_nospec ensures that an out-of-bounds value is set to zero
on the transient path. Decreasing the value by one afterwards causes
a transient integer underflow. vsa.console should be decreased first
and then sanitized with array_index_nospec.

Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh
Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU
Amsterdam.

Co-developed-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220127144406.3589293-1-jakobkoschel@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_pericom: Revert "Re-enable higher baud rates"

UPF_MAGIC_MULTIPLIER is userspace available bit and can be changed
at any time. There is no sense to rely on it to be always present.

This reverts commit b4ccaf5aa2d795ee7f47a6eeb209f3de981e1929.

Note, that code was not reliably worked before, hence it implies
no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: b4ccaf5aa2d7 ("serial: 8250_pericom: Re-enable higher baud rates")
Link: https://lore.kernel.org/r/20220203150026.19087-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()

The polling loop for the register change in iommu_ga_log_enable() needs
to have a udelay() in it.  Otherwise the CPU might be faster than the
IOMMU hardware and wrongly trigger the WARN_ON() further down the code
stream. Use a 10us for udelay(), has there is some hardware where
activation of the GA log can take more than a 100ms.

A future optimization should move the activation check of the GA log
to the point where it gets used for the first time. But that is a
bigger change and not suitable for a fix.

Fixes: 8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220204115537.3894-1-joro@8bytes.org

ixgbevf: Require large buffers for build_skb on 82599VF

From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb
around new data in the page buffer shared with the ixgbe PF.
This uses either a 2K or 3K buffer, and offsets the DMA mapping by
NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to
ensure the PF does not write a full 2K bytes into the buffer, which is
actually 2K minus the offset.

However on the 82599 virtual function, the RXDCTL mechanism is not
available. The driver attempts to work around this by using the SET_LPE
mailbox method to lower the maximm frame size, but the ixgbe PF driver
ignores this in order to keep the PF and all VFs in sync[0].

This means the PF will write up to the full 2K set in SRRCTL, causing it
to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer.
With 4K pages split into two buffers, this means it either writes
NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the
second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA
mapping.

Avoid this by only enabling build_skb when using "large" buffers (3K).
These are placed in each half of an order-1 page, preventing the PF from
writing past the end of the mapping.

[0]: Technically it only ever raises the max frame size, see
ixgbe_set_vf_lpe() in ixgbe_sriov.c

Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames")
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PCI/MSI: Remove bogus warning in pci_irq_get_affinity()

The recent overhaul of pci_irq_get_affinity() introduced a regression when
pci_irq_get_affinity() is called for an MSI-X interrupt which was not
allocated with affinity descriptor information.

The original code just returned a NULL pointer in that case, but the rework
added a WARN_ON() under the assumption that the corresponding WARN_ON() in
the MSI case can be applied to MSI-X as well.

In fact the MSI warning in the original code does not make sense either
because it's legitimate to invoke pci_irq_get_affinity() for a MSI
interrupt which was not allocated with affinity descriptor information.

Remove it and just return NULL as the original code did.

Fixes: f48235900182 ("PCI/MSI: Simplify pci_irq_get_affinity()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87ee4n38sm.ffs@tglx

KVM: x86: Use ERR_PTR_USR() to return -EFAULT as a __user pointer

Use ERR_PTR_USR() when returning -EFAULT from kvm_get_attr_addr(), sparse
complains about implicitly casting the kernel pointer from ERR_PTR() into
a __user pointer.

>> arch/x86/kvm/x86.c:4342:31: sparse: sparse: incorrect type in return expression
   (different address spaces) @@     expected void [noderef] __user * @@     got void * @@
   arch/x86/kvm/x86.c:4342:31: sparse:     expected void [noderef] __user *
   arch/x86/kvm/x86.c:4342:31: sparse:     got void *
>> arch/x86/kvm/x86.c:4342:31: sparse: sparse: incorrect type in return expression
   (different address spaces) @@     expected void [noderef] __user * @@     got void * @@
   arch/x86/kvm/x86.c:4342:31: sparse:     expected void [noderef] __user *
   arch/x86/kvm/x86.c:4342:31: sparse:     got void *

No functional change intended.

Fixes: 56f289a8d23a ("KVM: x86: Add a helper to retrieve userspace address from kvm_device_attr")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220202005157.2545816-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

arm64: dts: meson-sm1-odroid: fix boot loop after reboot

Since the correct gpio pin is used for enabling tf-io regulator the
system did not boot correctly after calling reboot.

[   36.862443] reboot: Restarting system
bl31 reboot reason: 0xd
bl31 reboot reason: 0x0
system cmd  1.
SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:0;READ:0;0.0;CHK:0;
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id:
SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:400;USB:8;LOOP:1;...

Setting the gpio to open drain solves the issue.

Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")
Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: reduced serial log & removed invalid character in commit message]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220128193150.GA1304381@odroid-VirtualBox

arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610

The BL32/TEE reserved-memory region is now inherited from the common
family dtsi (meson-g12-common) so we can drop it from board files.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220126044954.19069-4-christianshewitt@gmail.com

arm64: dts: meson-g12: add ATF BL32 reserved-memory region

Add an additional reserved memory region for the BL32 trusted firmware
present in many devices that boot from Amlogic vendor u-boot.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220126044954.19069-3-christianshewitt@gmail.com

arm64: dts: meson-gx: add ATF BL32 reserved-memory region

Add an additional reserved memory region for the BL32 trusted firmware
present in many devices that boot from Amlogic vendor u-boot.

Suggested-by: Mateusz Krzak <kszaquitto@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220126044954.19069-2-christianshewitt@gmail.com

arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2

GPIOE_2 is in AO domain and "<&gpio GPIOE_2 ...>" changes the state of
TF_PWR_EN of 'FC8731' on BPI-M5

Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220127151656.GA2419733@paju

arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator

The interrupt pin of the external ethernet phy is used, instead of the
enable-gpio pin of the tf-io regulator. The GPIOE_2 pin is located in
the gpio_ao bank.

This causes phy interrupt problems at system startup.
[   76.645190] irq 36: nobody cared (try booting with the "irqpoll" option)
[   76.649617] CPU: 0 PID: 1416 Comm: irq/36-0.0:00 Not tainted 5.16.0 #2
[   76.649629] Hardware name: Hardkernel ODROID-HC4 (DT)
[   76.649635] Call trace:
[   76.649638]  dump_backtrace+0x0/0x1c8
[   76.649658]  show_stack+0x14/0x60
[   76.649667]  dump_stack_lvl+0x64/0x7c
[   76.649676]  dump_stack+0x14/0x2c
[   76.649683]  __report_bad_irq+0x38/0xe8
[   76.649695]  note_interrupt+0x220/0x3a0
[   76.649704]  handle_irq_event_percpu+0x58/0x88
[   76.649713]  handle_irq_event+0x44/0xd8
[   76.649721]  handle_fasteoi_irq+0xa8/0x130
[   76.649730]  generic_handle_domain_irq+0x38/0x58
[   76.649738]  gic_handle_irq+0x9c/0xb8
[   76.649747]  call_on_irq_stack+0x28/0x38
[   76.649755]  do_interrupt_handler+0x7c/0x80
[   76.649763]  el1_interrupt+0x34/0x80
[   76.649772]  el1h_64_irq_handler+0x14/0x20
[   76.649781]  el1h_64_irq+0x74/0x78
[   76.649788]  irq_finalize_oneshot.part.56+0x68/0xf8
[   76.649796]  irq_thread_fn+0x5c/0x98
[   76.649804]  irq_thread+0x13c/0x260
[   76.649812]  kthread+0x144/0x178
[   76.649822]  ret_from_fork+0x10/0x20
[   76.649830] handlers:
[   76.653170] [<0000000025a6cd31>] irq_default_primary_handler threaded [<0000000093580eb7>] phy_interrupt
[   76.661256] Disabling IRQ #36

Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")
Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: removed spurious invalid & blank lines from commit message]
Link: https://lore.kernel.org/r/20220127130537.GA187347@odroid-VirtualBox

arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'

Typo in audio amplifier node, dioo2133 -> dio2133

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Fixes: ef599f5f3e10 ("arm64: dts: meson: convert ODROID-N2 to dtsi")
Fixes: 67d141c1f8e6 ("arm64: dts: meson: odroid-n2: add jack audio output support")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/YfKQJejh0bfGYvof@anyang

KVM: x86: Report deprecated x87 features in supported CPUID

CPUID.(EAX=7,ECX=0):EBX.FDP_EXCPTN_ONLY[bit 6] and
CPUID.(EAX=7,ECX=0):EBX.ZERO_FCS_FDS[bit 13] are "defeature"
bits. Unlike most of the other CPUID feature bits, these bits are
clear if the features are present and set if the features are not
present. These bits should be reported in KVM_GET_SUPPORTED_CPUID,
because if these bits are set on hardware, they cannot be cleared in
the guest CPUID. Doing so would claim guest support for a feature that
the hardware doesn't support and that can't be efficiently emulated.

Of course, any software (e.g WIN87EM.DLL) expecting these features to
be present likely predates these CPUID feature bits and therefore
doesn't know to check for them anyway.

Aaron Lewis added the corresponding X86_FEATURE macros in
commit cbb99c0f5887 ("x86/cpufeatures: Add FDP_EXCPTN_ONLY and
ZERO_FCS_FDS"), with the intention of reporting these bits in
KVM_GET_SUPPORTED_CPUID, but I was unable to find a proposed patch on
the kvm list.

Opportunistically reordered the CPUID_7_0_EBX capability bits from
least to most significant.

Cc: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220204001348.2844660-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ata: libata-core: Introduce ATA_HORKAGE_NO_LOG_DIR horkage

06f6c4c6c3e8 ("ata: libata: add missing ata_identify_page_supported() calls")
introduced additional calls to ata_identify_page_supported(), thus also
adding indirectly accesses to the device log directory log page through
ata_log_supported(). Reading this log page causes SATADOM-ML 3ME devices
to lock up.

Introduce the horkage flag ATA_HORKAGE_NO_LOG_DIR to prevent accesses to
the log directory in ata_log_supported() and add a blacklist entry
with this flag for "SATADOM-ML 3ME" devices.

Fixes: 636f6e2af4fb ("libata: add horkage for missing Identify Device log")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

MAINTAINERS: add myself as Renesas R-Car SATA driver reviewer

Add myself as a reviewer for the Renesas R-Car SATA driver -- I don't have
the hardware anymore (Geert Uytterhoeven does have a lot of hardware!) but
I do have the manuals still! :-)

Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

ksmbd: add support for key exchange

When mounting cifs client, can see the following warning message.

CIFS: decode_ntlmssp_challenge: authentication has been weakened as server
does not support key exchange

To remove this warning message, Add support for key exchange feature to
ksmbd. This patch decrypts 16-byte ciphertext value sent by the client
using RC4 with session key. The decrypted value is the recovered secondary
key that will use instead of the session key for signing and sealing.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd: reduce smb direct max read/write size

ksmbd does not support more than one Buffer Descriptor V1 element in
an smbdirect protocol request. Reducing the maximum read/write size to
about 512KB allows interoperability with Windows over a wider variety
of RDMA NICs, as an interim workaround.

Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd: don't align last entry offset in smb2 query directory

When checking smb2 query directory packets from other servers,
OutputBufferLength is different with ksmbd. Other servers add an unaligned
next offset to OutputBufferLength for the last entry.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd: fix same UniqueId for dot and dotdot entries

ksmbd sets the inode number to UniqueId. However, the same UniqueId for
dot and dotdot entry is set to the inode number of the parent inode.
This patch set them using the current inode and parent inode.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd: smbd: validate buffer descriptor structures

Check ChannelInfoOffset and ChannelInfoLength
to validate buffer descriptor structures.
And add a debug log to print the structures'
content.

Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'drm-intel-fixes-2022-02-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

Fix GitLab issue #4698: DP monitor through Type-C dock(Dell DA310) doesn't work.
Fixes for inconsistent engine busyness value and read timeout with GuC.
Fix to use ALLOW_FAIL for error capture buffer allocation. Don't use
interruptible lock on error path. Smatch fix to reject zero sized overlays.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YfuiG8SKMKP5V/Dm@jlahtine-mobl.ger.corp.intel.com

Merge tag 'drm-misc-fixes-2022-02-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

 * dma-buf/heaps: Fix potential spectre v1 gadget
 * drm/kmb: Fix potential out-of-bounds access
 * drm/mxsfb: Fix NULL-pointer dereference
 * drm/nouveau: Fix potential out-of-bounds access in BIOS decoding
 * fbdev: Re-add support for fbcon hardware acceleration

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Yfu8mTZQUNt1RwZd@linux-uq9g

netfilter: ctnetlink: disable helper autoassign

When userspace, e.g. conntrackd, inserts an entry with a specified helper,
its possible that the helper is lost immediately after its added:

ctnetlink_create_conntrack
  -> nf_ct_helper_ext_add + assign helper
    -> ctnetlink_setup_nat
      -> ctnetlink_parse_nat_setup
         -> parse_nat_setup -> nfnetlink_parse_nat_setup
                       -> nf_nat_setup_info
                                 -> nf_conntrack_alter_reply
                                   -> __nf_ct_try_assign_helper

... and __nf_ct_try_assign_helper will zero the helper again.

Set IPS_HELPER bit to bypass auto-assign logic, its unwanted, just like
when helper is assigned via ruleset.

Dropped old 'not strictly necessary' comment, it referred to use of
rcu_assign_pointer() before it got replaced by RCU_INIT_POINTER().

NB: Fixes tag intentionally incorrect, this extends the referenced commit,
but this change won't build without IPS_HELPER introduced there.

Fixes: 6714cf5465d280 ("netfilter: nf_conntrack: fix explicit helper attachment and NAT")
Reported-by: Pham Thanh Tuyen <phamtyn@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

MAINTAINERS: netfilter: update git links

nf and nf-next have a new location.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: conntrack: re-init state for retransmitted syn-ack

TCP conntrack assumes that a syn-ack retransmit is identical to the
previous syn-ack.  This isn't correct and causes stuck 3whs in some more
esoteric scenarios.  tcpdump to illustrate the problem:

 client > server: Flags [S] seq 1365731894, win 29200, [mss 1460,sackOK,TS val 2083035583 ecr 0,wscale 7]
 server > client: Flags [S.] seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215367629 ecr 2082921663]

Note the invalid/outdated synack ack number.
Conntrack marks this syn-ack as out-of-window/invalid, but it did
initialize the reply direction parameters based on this packets content.

 client > server: Flags [S] seq 1365731894, win 29200, [mss 1460,sackOK,TS val 2083036623 ecr 0,wscale 7]

... retransmit...

 server > client: Flags [S.], seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215368644 ecr 2082921663]

and another bogus synack. This repeats, then client re-uses for a new
attempt:

client > server: Flags [S], seq 2375731741, win 29200, [mss 1460,sackOK,TS val 2083100223 ecr 0,wscale 7]
server > client: Flags [S.], seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215430754 ecr 2082921663]

... but still gets a invalid syn-ack.

This repeats until:

 server > client: Flags [S.], seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215437785 ecr 2082921663]
 server > client: Flags [R.], seq 145824454, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215443451 ecr 2082921663]
 client > server: Flags [S], seq 2375731741, win 29200, [mss 1460,sackOK,TS val 2083115583 ecr 0,wscale 7]
 server > client: Flags [S.], seq 162602410, ack 2375731742, win 65535, [mss 8952,wscale 5,TS val 3215445754 ecr 2083115583]

This syn-ack has the correct ack number, but conntrack flags it as
invalid: The internal state was created from the first syn-ack seen
so the sequence number of the syn-ack is treated as being outside of
the announced window.

Don't assume that retransmitted syn-ack is identical to previous one.
Treat it like the first syn-ack and reinit state.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: conntrack: move synack init code to helper

It seems more readable to use a common helper in the followup fix rather
than copypaste or goto.

No functional change intended.  The function is only called for syn-ack
or syn in repy direction in case of simultaneous open.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_payload: don't allow th access for fragments

Loads relative to ->thoff naturally expect that this points to the
transport header, but this is only true if pkt->fragoff == 0.

This has little effect for rulesets with connection tracking/nat because
these enable ip defra. For other rulesets this prevents false matches.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: conntrack: don't refresh sctp entries in closed state

Vivek Thrivikraman reported:
 An SCTP server application which is accessed continuously by client
 application.
 When the session disconnects the client retries to establish a connection.
 After restart of SCTP server application the session is not established
 because of stale conntrack entry with connection state CLOSED as below.

 (removing this entry manually established new connection):

 sctp 9 CLOSED src=10.141.189.233 [..]  [ASSURED]

Just skip timeout update of closed entries, we don't want them to
stay around forever.

Reported-and-tested-by: Vivek Thrivikraman <vivek.thrivikraman@est.tech>
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1579
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

erofs: fix small compressed files inlining

Prior to ztailpacking feature, it's enough that each lcluster has
two pclusters at most, and the last pcluster should be turned into
an uncompressed pcluster when necessary. For example,
  _________________________________________________
 |_ pcluster n-2 _|_ pcluster n-1 _|____ EOFed ____|

which should be converted into:
  _________________________________________________
 |_ pcluster n-2 _|_ pcluster n-1 (uncompressed)' _|

That is fine since either pcluster n-1 or (uncompressed)' takes one
physical block.

However, after ztailpacking was supported, the game is changed since
the last pcluster can be inlined now. And such case above is quite
common for inlining small files. Therefore, in order to inline more
effectively, special EOF lclusters are now supported which can have
three parts at most, as illustrated below:
  _________________________________________________
 |_ pcluster n-2 _|_ pcluster n-1 _|____ EOFed ____|
                                   ^ i_size

Actually similar code exists in Yue Hu's original patchset [1], but I
removed this part on purpose. After evaluating more real cases with
small files, I've changed my mind.

[1] https://lore.kernel.org/r/20211215094449.15162-1-huyue2@yulong.com

Link: https://lore.kernel.org/r/20220203190203.30794-1-xiang@kernel.org
Fixes: ab92184ff8f1 ("erofs: add on-disk compressed tail-packing inline support")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

block: bio-integrity: Advance seed correctly for larger interval sizes

Commit 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update
integrity seed") added code to update the integrity seed value when
advancing a bio. However, it failed to take into account that the
integrity interval might be larger than the 512-byte block layer
sector size. This broke bio splitting on PI devices with 4KB logical
blocks.

The seed value should be advanced by bio_integrity_intervals() and not
the number of sectors.

Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: stable@vger.kernel.org
Fixes: 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed")
Tested-by: Dmitry Ivanov <dmitry.ivanov2@hpe.com>
Reported-by: Alexey Lyashkov <alexey.lyashkov@hpe.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220204034209.4193-1-martin.petersen@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>