David Woodhouse [Tue, 10 Jan 2023 08:01:47 +0000 (08:01 +0000)]
i386/xen: Initialize XenBus and legacy backends from pc_init1()
Now that we're close to being able to use the PV backends without actual
Xen, move the bus instantiation out from xen_hvm_init_pc() to pc_init1().
However, still only do it for (xen_mode == XEN_ATTACH) (i.e. when running
on true Xen) because we don't have XenStore ops for emulation yet, and
the XenBus instantiation failure is fatal. Once we have a functional
XenStore for emulated mode, this will become (xen_mode != XEN_DISABLED).
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Tue, 10 Jan 2023 01:35:33 +0000 (01:35 +0000)]
hw/xen: Remove old version of Xen headers
For Xen emulation support, a full set of Xen headers was imported to
include/standard-headers/xen. This renders the original partial set in
include/hw/xen/interface redundant.
Now that the header ordering and handling of __XEN_INTERFACE_VERSION__
vs. __XEN_TOOLS__ is all untangled, remove the old set of headers and
use only the new ones.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Tue, 10 Jan 2023 01:09:04 +0000 (01:09 +0000)]
hw/xen: Implement soft reset for emulated gnttab
This is only part of it; we will also need to get the PV back end drivers
to tear down their own mappings (or do it for them, but they kind of need
to stop using the pointers too).
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Fri, 6 Jan 2023 09:59:28 +0000 (09:59 +0000)]
hw/xen: Add backend implementation of grant table operations
This is limited to mapping a single grant at a time, because under Xen the
pages are mapped *contiguously* into qemu's address space, and that's very
hard to do when those pages actually come from anonymous mappings in qemu
in the first place.
Eventually perhaps we can look at using shared mappings of actual objects
for system RAM, and then we can make new mappings of the same backing
store (be it deleted files, shmem, whatever). But for now let's stuck to
a page at a time.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Mon, 2 Jan 2023 00:39:13 +0000 (00:39 +0000)]
hw/xen: Rename xen_common.h to xen_native.h
This header is now only for native Xen code, not PV backends that may be
used in Xen emulation. Since the toolstack libraries may depend on the
specific version of Xen headers that they pull in (and will set the
__XEN_TOOLS__ macro to enable internal definitions that they depend on),
the rule is that xen_native.h (and thus the toolstack library headers)
must be included *before* any of the headers in standard-headers/xen.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Sat, 7 Jan 2023 16:47:43 +0000 (16:47 +0000)]
hw/xen: Use XEN_PAGE_SIZE in PV backend drivers
XC_PAGE_SIZE comes from the actual Xen libraries, while XEN_PAGE_SIZE is
provided by QEMU itself in xen_backend_ops.h. For backends which may be
built for emulation mode, use the latter.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Sat, 7 Jan 2023 16:17:51 +0000 (16:17 +0000)]
hw/xen: Move xenstore_store_pv_console_info to xen_console.c
There's no need for this to be in the Xen accel code, and as we want to
use the Xen console support with KVM-emulated Xen we'll want to have a
platform-agnostic version of it. Make it use GString to build up the
path while we're at it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Sun, 1 Jan 2023 21:31:37 +0000 (21:31 +0000)]
hw/xen: Add gnttab operations to allow redirection to internal emulation
In emulation, mapping more than one grant ref to be virtually contiguous
would be fairly difficult. The best way to do it might be to make the
ram_block mappings actually backed by a file (shmem or a deleted file,
perhaps) so that we can have multiple *shared* mappings of it. But that
would be fairly intrusive.
Making the backend drivers cope with page *lists* instead of expecting
the mapping to be contiguous is also non-trivial, since some structures
would actually *cross* page boundaries (e.g. the 32-bit blkif responses
which are 12 bytes).
So for now, we'll support only single-page mappings in emulation.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paul Durrant <pdurrant@amazon.com>
David Woodhouse [Wed, 28 Dec 2022 10:06:49 +0000 (10:06 +0000)]
hw/xen: Add basic ring handling to xenstore
Extract requests, return ENOSYS to all of them. This is enough to allow
older Linux guests to boot, as they need *something* back but it doesn't
matter much what.
In the first instance we're likely to wire this up over a UNIX socket to
an actual xenstored implementation, but in the fullness of time it would
be nice to have a fully single-tenant "virtual" xenstore within qemu.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Tue, 27 Dec 2022 21:20:07 +0000 (21:20 +0000)]
hw/xen: Add backend implementation of interdomain event channel support
The provides the QEMU side of interdomain event channels, allowing events
to be sent to/from the guest.
The API mirrors libxenevtchn, and in time both this and the real Xen one
will be available through ops structures so that the PV backend drivers
can use the correct one as appropriate.
For now, this implementation can be used directly by our XenStore which
will be for emulated mode only.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Which is used to fetch xenstore PFN and port to be used
by the guest. This is preallocated by the toolstack when
guest will just read those and use it straight away.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Introduce support for one shot and periodic mode of Xen PV timers,
whereby timer interrupts come through a special virq event channel
with deadlines being set through:
David Woodhouse [Fri, 16 Dec 2022 00:03:21 +0000 (00:03 +0000)]
hw/xen: Support HVM_PARAM_CALLBACK_TYPE_PCI_INTX callback
The guest is permitted to specify an arbitrary domain/bus/device/function
and INTX pin from which the callback IRQ shall appear to have come.
In QEMU we can only easily do this for devices that actually exist, and
even that requires us "knowing" that it's a PCMachine in order to find
the PCI root bus — although that's OK really because it's always true.
We also don't get to get notified of INTX routing changes, because we
can't do that as a passive observer; if we try to register a notifier
it will overwrite any existing notifier callback on the device.
But in practice, guests using PCI_INTX will only ever use pin A on the
Xen platform device, and won't swizzle the INTX routing after they set
it up. So this is just fine.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Thu, 15 Dec 2022 20:35:24 +0000 (20:35 +0000)]
hw/xen: Support HVM_PARAM_CALLBACK_TYPE_GSI callback
The GSI callback (and later PCI_INTX) is a level triggered interrupt. It
is asserted when an event channel is delivered to vCPU0, and is supposed
to be cleared when the vcpu_info->evtchn_upcall_pending field for vCPU0
is cleared again.
Thankfully, Xen does *not* assert the GSI if the guest sets its own
evtchn_upcall_pending field; we only need to assert the GSI when we
have delivered an event for ourselves. So that's the easy part.
However, we *do* need to poll for the evtchn_upcall_pending flag being
cleared. In an ideal world we would poll that when the EOI happens on
the PIC/IOAPIC. That's how it works in the kernel with the VFIO eventfd
pairs — one is used to trigger the interrupt, and the other works in the
other direction to 'resample' on EOI, and trigger the first eventfd
again if the line is still active.
However, QEMU doesn't seem to do that. Even VFIO level interrupts seem
to be supported by temporarily unmapping the device's BARs from the
guest when an interrupt happens, then trapping *all* MMIO to the device
and sending the 'resample' event on *every* MMIO access until the IRQ
is cleared! Maybe in future we'll plumb the 'resample' concept through
QEMU's irq framework but for now we'll do what Xen itself does: just
check the flag on every vmexit if the upcall GSI is known to be
asserted.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Tue, 13 Dec 2022 22:40:56 +0000 (22:40 +0000)]
hw/xen: Implement EVTCHNOP_bind_virq
Add the array of virq ports to each vCPU so that we can deliver timers,
debug ports, etc. Global virqs are allocated against vCPU 0 initially,
but can be migrated to other vCPUs (when we implement that).
The kernel needs to know about VIRQ_TIMER in order to accelerate timers,
so tell it via KVM_XEN_VCPU_ATTR_TYPE_TIMER. Also save/restore the value
of the singleshot timer across migration, as the kernel will handle the
hypercalls automatically now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Tue, 13 Dec 2022 17:20:46 +0000 (17:20 +0000)]
hw/xen: Implement EVTCHNOP_unmask
This finally comes with a mechanism for actually injecting events into
the guest vCPU, with all the atomic-test-and-set that's involved in
setting the bit in the shinfo, then the index in the vcpu_info, and
injecting either the lapic vector as MSI, or letting KVM inject the
bare vector.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Tue, 13 Dec 2022 13:57:44 +0000 (13:57 +0000)]
hw/xen: Implement EVTCHNOP_close
It calls an internal close_port() helper which will also be used from
EVTCHNOP_reset and will actually do the work to disconnect/unbind a port
once any of that is actually implemented in the first place.
That in turn calls a free_port() internal function which will be in
error paths after allocation.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Fri, 16 Dec 2022 14:32:25 +0000 (14:32 +0000)]
i386/xen: Add support for Xen event channel delivery to vCPU
The kvm_xen_inject_vcpu_callback_vector() function will either deliver
the per-vCPU local APIC vector (as an MSI), or just kick the vCPU out
of the kernel to trigger KVM's automatic delivery of the global vector.
Support for asserting the GSI/PCI_INTX callbacks will come later.
Also add kvm_xen_get_vcpu_info_hva() which returns the vcpu_info of
a given vCPU.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Fri, 16 Dec 2022 14:02:29 +0000 (14:02 +0000)]
hw/xen: Add xen_evtchn device for event channel emulation
Include basic support for setting HVM_PARAM_CALLBACK_IRQ to the global
vector method HVM_PARAM_CALLBACK_TYPE_VECTOR, which is handled in-kernel
by raising the vector whenever the vCPU's vcpu_info->evtchn_upcall_pending
flag is set.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Ankur Arora [Tue, 6 Dec 2022 11:14:07 +0000 (11:14 +0000)]
i386/xen: implement HVMOP_set_param
This is the hook for adding the HVM_PARAM_CALLBACK_IRQ parameter in a
subsequent commit.
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com> Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Split out from another commit] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
The HVMOP_set_evtchn_upcall_vector hypercall sets the per-vCPU upcall
vector, to be delivered to the local APIC just like an MSI (with an EOI).
This takes precedence over the system-wide delivery method set by the
HVMOP_set_param hypercall with HVM_PARAM_CALLBACK_IRQ. It's used by
Windows and Xen (PV shim) guests but normally not by Linux.
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com> Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Rework for upstream kernel changes and split from HVMOP_set_param] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
Joao Martins [Thu, 28 Jun 2018 16:36:19 +0000 (12:36 -0400)]
i386/xen: implement HYPERVISOR_event_channel_op
Additionally set XEN_INTERFACE_VERSION to most recent in order to
exercise the "new" event_channel_op.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Ditch event_channel_op_compat which was never available to HVM guests] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Joao Martins [Mon, 18 Jun 2018 16:26:44 +0000 (12:26 -0400)]
i386/xen: implement HYPERVISOR_vcpu_op
This is simply when guest tries to register a vcpu_info
and since vcpu_info placement is optional in the minimum ABI
therefore we can just fail with -ENOSYS
Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Mon, 12 Dec 2022 14:03:41 +0000 (14:03 +0000)]
i386/xen: manage and save/restore Xen guest long_mode setting
Xen will "latch" the guest's 32-bit or 64-bit ("long mode") setting when
the guest writes the MSR to fill in the hypercall page, or when the guest
sets the event channel callback in HVM_PARAM_CALLBACK_IRQ.
KVM handles the former and sets the kernel's long_mode flag accordingly.
The latter will be handled in userspace. Keep them in sync by noticing
when a hypercall is made in a mode that doesn't match qemu's idea of
the guest mode, and resyncing from the kernel. Do that same sync right
before serialization too, in case the guest has set the hypercall page
but hasn't yet made a system call.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Mon, 12 Dec 2022 23:40:45 +0000 (23:40 +0000)]
i386/xen: add pc_machine_kvm_type to initialize XEN_EMULATE mode
The xen_overlay device (and later similar devices for event channels and
grant tables) need to be instantiated. Do this from a kvm_type method on
the PC machine derivatives, since KVM is only way to support Xen emulation
for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Wed, 7 Dec 2022 09:19:31 +0000 (09:19 +0000)]
hw/xen: Add xen_overlay device for emulating shared xenheap pages
For the shared info page and for grant tables, Xen shares its own pages
from the "Xen heap" to the guest. The guest requests that a given page
from a certain address space (XENMAPSPACE_shared_info, etc.) be mapped
to a given GPA using the XENMEM_add_to_physmap hypercall.
To support that in qemu when *emulating* Xen, create a memory region
(migratable) and allow it to be mapped as an overlay when requested.
Xen theoretically allows the same page to be mapped multiple times
into the guest, but that's hard to track and reinstate over migration,
so we automatically *unmap* any previous mapping when creating a new
one. This approach has been used in production with.... a non-trivial
number of guests expecting true Xen, without any problems yet being
noticed.
This adds just the shared info page for now. The grant tables will be
a larger region, and will need to be overlaid one page at a time. I
think that means I need to create separate aliases for each page of
the overall grant_frames region, so that they can be mapped individually.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Wed, 14 Dec 2022 21:50:41 +0000 (21:50 +0000)]
i386/xen: Implement SCHEDOP_poll and SCHEDOP_yield
They both do the same thing and just call sched_yield. This is enough to
stop the Linux guest panicking when running on a host kernel which doesn't
intercept SCHEDOP_poll and lets it reach userspace.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
It allows to shutdown itself via hypercall with any of the 3 reasons:
1) self-reboot
2) shutdown
3) crash
Implementing SCHEDOP_shutdown sub op let us handle crashes gracefully rather
than leading to triple faults if it remains unimplemented.
In addition, the SHUTDOWN_soft_reset reason is used for kexec, to reset
Xen shared pages and other enlightenments and leave a clean slate for the
new kernel without the hypervisor helpfully writing information at
unexpected addresses.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Ditch sched_op_compat which was never available for HVM guests,
Add SCHEDOP_soft_reset] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Joao Martins [Thu, 14 Jun 2018 12:29:45 +0000 (08:29 -0400)]
i386/xen: implement HYPERVISOR_xen_version
This is just meant to serve as an example on how we can implement
hypercalls. xen_version specifically since Qemu does all kind of
feature controllability. So handling that here seems appropriate.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Implement kvm_gva_rw() safely] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
Joao Martins [Wed, 13 Jun 2018 14:14:31 +0000 (10:14 -0400)]
i386/xen: handle guest hypercalls
This means handling the new exit reason for Xen but still
crashing on purpose. As we implement each of the hypercalls
we will then return the right return code.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Add CPL to hypercall tracing, disallow hypercalls from CPL > 0] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Fri, 16 Dec 2022 11:05:29 +0000 (11:05 +0000)]
i386/hvm: Set Xen vCPU ID in KVM
There are (at least) three different vCPU ID number spaces. One is the
internal KVM vCPU index, based purely on which vCPU was chronologically
created in the kernel first. If userspace threads are all spawned and
create their KVM vCPUs in essentially random order, then the KVM indices
are basically random too.
The second number space is the APIC ID space, which is consistent and
useful for referencing vCPUs. MSIs will specify the target vCPU using
the APIC ID, for example, and the KVM Xen APIs also take an APIC ID
from userspace whenever a vCPU needs to be specified (as opposed to
just using the appropriate vCPU fd).
The third number space is not normally relevant to the kernel, and is
the ACPI/MADT/Xen CPU number which corresponds to cs->cpu_index. But
Xen timer hypercalls use it, and Xen timer hypercalls *really* want
to be accelerated in the kernel rather than handled in userspace, so
the kernel needs to be told.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
Joao Martins [Tue, 6 Dec 2022 10:48:53 +0000 (10:48 +0000)]
i386/kvm: handle Xen HVM cpuid leaves
Introduce support for emulating CPUID for Xen HVM guests. It doesn't make
sense to advertise the KVM leaves to a Xen guest, so do Xen unconditionally
when the xen-version machine property is set.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Obtain xen_version from KVM property, make it automatic] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
David Woodhouse [Sat, 3 Dec 2022 17:51:13 +0000 (09:51 -0800)]
i386/kvm: Add xen-version KVM accelerator property and init KVM Xen support
This just initializes the basic Xen support in KVM for now. Only permitted
on TYPE_PC_MACHINE because that's where the sysbus devices for Xen heap
overlay, event channel, grant tables and other stuff will exist. There's
no point having the basic hypercall support if nothing else works.
Provide sysemu/kvm_xen.h and a kvm_xen_get_caps() which will be used
later by support devices.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
David Woodhouse [Tue, 6 Dec 2022 09:03:48 +0000 (09:03 +0000)]
xen: add CONFIG_XENFV_MACHINE and CONFIG_XEN_EMU options for Xen emulation
The XEN_EMU option will cover core Xen support in target/, which exists
only for x86 with KVM today but could theoretically also be implemented
on Arm/Aarch64 and with TCG or other accelerators. It will also cover
the support for architecture-independent grant table and event channel
support which will be added in hw/i386/kvm/ (on the basis that the
non-KVM support is very theoretical and making it not use KVM directly
seems like gratuitous overengineering at this point).
The XENFV_MACHINE option is for the xenfv platform support, which will
now be used both by XEN_EMU and by real Xen.
The XEN option remains dependent on the Xen runtime libraries, and covers
support for real Xen. Some code which currently resides under CONFIG_XEN
will be moving to CONFIG_XENFV_MACHINE over time.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
Joao Martins [Wed, 13 Feb 2019 17:29:47 +0000 (12:29 -0500)]
include: import Xen public headers to include/standard-headers/
There are already some partial headers in include/hw/xen/interface/
which will be removed once we migrate users to the new location.
To start with, define __XEN_TOOLS__ in hw/xen/xen.h to ensure that any
internal definitions needed by Xen toolstack libraries are present
regardless of the order in which the headers are included. A reckoning
will come later, once we make the PV backends work in emulation and
untangle the headers for Xen-native vs. generic parts.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Update to Xen public headers from 4.16.2 release, add some in io/,
define __XEN_TOOLS__ in hw/xen/xen.h] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
Peter Maydell [Wed, 4 Jan 2023 14:53:59 +0000 (14:53 +0000)]
Merge tag 'pull-9p-20221223' of https://github.com/cschoenebeck/qemu into staging
9pfs: Windows host prep, cleanup
* Next preparatory patches for upcoming Windows host support.
* Cleanup patches.
# gpg: Signature made Fri 23 Dec 2022 11:04:26 GMT
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* tag 'pull-9p-20221223' of https://github.com/cschoenebeck/qemu:
hw/9pfs: Replace the direct call to xxxat() APIs with a wrapper
hw/9pfs: Drop unnecessary *xattr wrapper API declarations
qemu/xattr.h: Exclude <sys/xattr.h> for Windows
MAINTAINERS: Add 9p test client to section "virtio-9p"
9pfs: Fix some return statements in the synth backend
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bin Meng [Mon, 19 Dec 2022 10:20:07 +0000 (18:20 +0800)]
hw/9pfs: Replace the direct call to xxxat() APIs with a wrapper
xxxat() APIs are only available on POSIX platforms. For future
extension to Windows, let's replace the direct call to xxxat()
APIs with a wrapper.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221219102022.2167736-4-bin.meng@windriver.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Bin Meng [Mon, 19 Dec 2022 10:20:06 +0000 (18:20 +0800)]
hw/9pfs: Drop unnecessary *xattr wrapper API declarations
These are not used anywhere in the source tree. Drop them.
Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20221219102022.2167736-3-bin.meng@windriver.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Bin Meng [Mon, 19 Dec 2022 10:20:05 +0000 (18:20 +0800)]
qemu/xattr.h: Exclude <sys/xattr.h> for Windows
Windows does not have <sys/xattr.h>.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221219102022.2167736-2-bin.meng@windriver.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Christian Schoenebeck [Mon, 28 Nov 2022 17:12:04 +0000 (18:12 +0100)]
MAINTAINERS: Add 9p test client to section "virtio-9p"
The 9p test cases use a dedicated, lite-weight 9p client implementation
(using virtio transport) under tests/qtest/libqos/ to communicate with
QEMU's 9p server.
It's already there for a long time. Let's officially assign it to 9p
maintainers.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <E1ozhlV-0007BU-0g@lizzy.crudebyte.com>
Greg Kurz [Thu, 24 Nov 2022 15:58:38 +0000 (16:58 +0100)]
9pfs: Fix some return statements in the synth backend
The qemu_v9fs_synth_mkdir() and qemu_v9fs_synth_add_file() functions
currently return a positive errno value on failure. This causes
checkpatch.pl to spit several errors like the one below:
ERROR: return of an errno should typically be -ve (return -EAGAIN)
+ return EAGAIN;
Simply change the sign. This has no consequence since callers
assert() the returned value to be equal to 0.
Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <166930551818.827792.10663674346122681963.stgit@bahia>
[C.S.: - Resolve conflict with 66997c42e02c. ] Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Peter Maydell [Wed, 21 Dec 2022 18:08:09 +0000 (18:08 +0000)]
Merge tag 'pull-ppc-20221221' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-12-21:
This queue contains a MAINTAINERS update, the implementation of the Freescale eSDHC,
the introduction of the DEXCR/HDEXCR instructions and other assorted fixes (most of
them for the e500 board).
# gpg: Signature made Wed 21 Dec 2022 17:18:53 GMT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20221221' of https://gitlab.com/danielhb/qemu:
target/ppc: Check DEXCR on hash{st, chk} instructions
target/ppc: Implement the DEXCR and HDEXCR
hw/ppc/e500: Move comment to more appropriate place
hw/ppc/e500: Resolve variable shadowing
hw/ppc/e500: Prefer local variable over qdev_get_machine()
hw/ppc/virtex_ml507: Prefer local over global variable
target/ppc/mmu_common: Fix table layout of "info tlb" HMP command
target/ppc/mmu_common: Log which effective address had no TLB entry found
hw/ppc/spapr: Reduce "vof.h" inclusion
hw/ppc/vof: Do not include the full "cpu.h"
target/ppc/kvm: Add missing "cpu.h" and "exec/hwaddr.h"
hw/ppc/e500: Add Freescale eSDHC to e500plat
hw/sd/sdhci: Support big endian SD host controller interfaces
MAINTAINERS: downgrade PPC KVM/TCG CPUs and pSeries to 'Odd Fixes'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nicholas Miehlbradt [Tue, 20 Dec 2022 04:23:29 +0000 (04:23 +0000)]
target/ppc: Implement the DEXCR and HDEXCR
Define the DEXCR and HDEXCR as special purpose registers.
Each register occupies two SPR indicies, one which can be read in an
unprivileged state and one which can be modified in the appropriate
priviliged state, however both indicies refer to the same underlying
value.
Note that the ISA uses the abbreviation UDEXCR in two different
contexts: the userspace DEXCR, the SPR index which can be read from
userspace (implemented in this patch), and the ultravisor DEXCR, the
equivalent register for the ultravisor state (not implemented).
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221220042330.2387944-2-nicholas@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Bernhard Beschow [Fri, 16 Dec 2022 14:57:07 +0000 (15:57 +0100)]
hw/ppc/e500: Prefer local variable over qdev_get_machine()
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216145709.271940-5-shentey@gmail.com>
[danielhb: remove linebreak in object_property_add_child()] Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Bernhard Beschow [Fri, 16 Dec 2022 14:57:06 +0000 (15:57 +0100)]
hw/ppc/virtex_ml507: Prefer local over global variable
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216145709.271940-4-shentey@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216145709.271940-3-shentey@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Bernhard Beschow [Fri, 16 Dec 2022 14:57:04 +0000 (15:57 +0100)]
target/ppc/mmu_common: Log which effective address had no TLB entry found
Let's not leave developers in the dark where this log message comes
from.
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216145709.271940-2-shentey@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Philippe Mathieu-Daudé [Tue, 13 Dec 2022 12:35:49 +0000 (13:35 +0100)]
hw/ppc/spapr: Reduce "vof.h" inclusion
Currently objects including "hw/ppc/spapr.h" are forced to be
target specific due to the inclusion of "vof.h" in "spapr.h".
"spapr.h" only uses a Vof pointer, so doesn't require the structure
declaration. The only place where Vof structure is accessed is in
spapr.c, so include "vof.h" there, and forward declare the structure
in "spapr.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221213123550.39302-4-philmd@linaro.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Philippe Mathieu-Daudé [Tue, 13 Dec 2022 12:35:47 +0000 (13:35 +0100)]
target/ppc/kvm: Add missing "cpu.h" and "exec/hwaddr.h"
kvm_ppc.h is missing various declarations from "cpu.h":
target/ppc/kvm_ppc.h:128:40: error: unknown type name 'CPUPPCState'; did you mean 'CPUState'?
static inline int kvmppc_get_hypercall(CPUPPCState *env,
^~~~~~~~~~~
CPUState
include/qemu/typedefs.h:45:25: note: 'CPUState' declared here
typedef struct CPUState CPUState;
^
target/ppc/kvm_ppc.h:134:40: error: unknown type name 'PowerPCCPU'
static inline int kvmppc_set_interrupt(PowerPCCPU *cpu, int irq, int level)
^
target/ppc/kvm_ppc.h:285:38: error: unknown type name 'hwaddr'
hwaddr ptex, int n)
^
target/ppc/kvm_ppc.h:220:15: error: unknown type name 'target_ulong'
static inline target_ulong kvmppc_configure_v3_mmu(PowerPCCPU *cpu,
^
target/ppc/kvm_ppc.h:286:38: error: unknown type name 'ppc_hash_pte64_t'
static inline void kvmppc_read_hptes(ppc_hash_pte64_t *hptes,
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221213123550.39302-2-philmd@linaro.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Philippe Mathieu-Daudé [Tue, 1 Nov 2022 22:29:34 +0000 (23:29 +0100)]
hw/ppc/e500: Add Freescale eSDHC to e500plat
Adds missing functionality to e500plat machine which increases the
chance of given "real" firmware images to access SD cards.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221018210146.193159-8-shentey@gmail.com>
[PMD: Simplify using create_unimplemented_device("esdhc")] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221101222934.52444-4-philmd@linaro.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Philippe Mathieu-Daudé [Tue, 1 Nov 2022 22:29:33 +0000 (23:29 +0100)]
hw/sd/sdhci: Support big endian SD host controller interfaces
Some SDHCI IP can be synthetized in various endianness:
https://github.com/u-boot/u-boot/blob/v2021.04/doc/README.fsl-esdhc
- CONFIG_SYS_FSL_ESDHC_BE
ESDHC IP is in big-endian mode. Accessing ESDHC registers can be
determined by ESDHC IP's endian mode or processor's endian mode.
Our current implementation is little-endian. In order to support
big endianness:
- Rename current MemoryRegionOps as sdhci_mmio_le_ops ('le')
- Add an 'endianness' property to SDHCIState (default little endian)
- Set the 'io_ops' field in realize() after checking the property
- Add the sdhci_mmio_be_ops (big-endian) MemoryRegionOps.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221101222934.52444-3-philmd@linaro.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Daniel Henrique Barboza [Thu, 17 Nov 2022 15:32:18 +0000 (12:32 -0300)]
MAINTAINERS: downgrade PPC KVM/TCG CPUs and pSeries to 'Odd Fixes'
The maintainer is no longer being paid to maintain these components. All
maintainership work is being done in his personal time since the middle
of the 7.2 development cycle.
Change the status of PPC KVM CPUs, PPC TCG CPUs and the pSeries machine
to 'Odd Fixes', reflecting that the maintainer no longer has exclusive
time to dedicate to them. It'll also (hopefully) keep expectations under
check when/if these components are used in a customer product.
Cc: Cédric Le Goater <clg@kaod.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20221117153218.182835-1-danielhb413@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Peter Maydell [Wed, 21 Dec 2022 15:44:08 +0000 (15:44 +0000)]
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
make TCO watchdog work by default
part of generic vdpa support
asid interrupt for vhost-vdpa
added flex bus port DVSEC for cxl
misc fixes, cleanups, documentation
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 21 Dec 2022 12:32:36 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (41 commits)
contrib/vhost-user-blk: Replace lseek64 with lseek
libvhost-user: Switch to unsigned int for inuse field in struct VuVirtq
hw/virtio: Extract QMP related code virtio-qmp.c
hw/virtio: Extract config read/write accessors to virtio-config-io.c
hw/virtio: Constify qmp_virtio_feature_map_t[]
hw/virtio: Guard and restrict scope of qmp_virtio_feature_map_t[]
hw/virtio: Rename virtio_ss[] -> specific_virtio_ss[]
hw/virtio: Add missing "hw/core/cpu.h" include
hw/cxl/device: Add Flex Bus Port DVSEC
hw/acpi: Rename tco.c -> ich9_tco.c
acpi/tests/avocado/bits: add mformat as one of the dependencies
docs/acpi/bits: document BITS_DEBUG environment variable
pci: drop redundant PCIDeviceClass::is_bridge field
remove DEC 21154 PCI bridge
vhost: fix vq dirty bitmap syncing when vIOMMU is enabled
acpi/tests/avocado/bits: add SPDX license identifiers for bios bits tests
include/hw: attempt to document VirtIO feature variables
vhost-user: send set log base message only once
vdpa: always start CVQ in SVQ mode if possible
vdpa: add shadow_data to vhost_vdpa
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 21 Dec 2022 14:15:18 +0000 (14:15 +0000)]
Merge tag 'pull-tcg-20221220' of https://gitlab.com/rth7680/qemu into staging
Use interval trees for user-only vma mappings.
Assorted cleanups to page locking.
# gpg: Signature made Wed 21 Dec 2022 05:00:30 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20221220' of https://gitlab.com/rth7680/qemu:
accel/tcg: Restrict page_collection structure to system TB maintainance
accel/tcg: Factor tb_invalidate_phys_range_fast() out
accel/tcg: Rename tb_invalidate_phys_page_fast{,__locked}()
accel/tcg: Remove trace events from trace-root.h
accel/tcg: Restrict cpu_io_recompile() to system emulation
accel/tcg: Move remainder of page locking to tb-maint.c
accel/tcg: Move PageDesc tree into tb-maint.c for system
accel/tcg: Use interval tree for user-only page tracking
accel/tcg: Move page_{get,set}_flags to user-exec.c
accel/tcg: Drop PAGE_RESERVED for CONFIG_BSD
accel/tcg: Use interval tree for TARGET_PAGE_DATA_SIZE
accel/tcg: Use interval tree for TBs in user-only mode
accel/tcg: Rename page_flush_tb
util: Add interval-tree.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 20 Dec 2022 17:46:38 +0000 (17:46 +0000)]
block/io: Check for replay-enabled in bdrv_drain_all_begin()
In commit da0bd74434 we refactored bdrv_drain_all_begin() to pull out
the non-polling part into bdrv_drain_all_begin_nopoll(). This change
broke record-and-replay, because the "return early if replay enabled"
check is now in the sub-function bdrv_drain_all_begin_nopoll(), and
so it only causes us to return from that function, and not from the
calling bdrv_drain_all_begin().
Fix the regression by checking whether replay is enabled in both
functions.
The breakage and fix can be tested via 'make check-avocado': the
tests/avocado/reverse_debugging.py:ReverseDebugging_X86_64.test_x86_64_pc
tests/avocado/reverse_debugging.py:ReverseDebugging_AArch64.test_aarch64_virt
tests were both broken by this.
Fixes: da0bd744344adb1f285 ("block: Factor out bdrv_drain_all_begin_nopoll()") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20221220174638.2156308-1-peter.maydell@linaro.org
Khem Raj [Sun, 18 Dec 2022 22:07:40 +0000 (14:07 -0800)]
contrib/vhost-user-blk: Replace lseek64 with lseek
64bit off_t is already in use since build uses _FILE_OFFSET_BITS=64
already. Using lseek/off_t also makes it work with latest musl without
using _LARGEFILE64_SOURCE macro. This macro is implied with _GNU_SOURCE
when using glibc but not with musl.
Signed-off-by: Khem Raj <raj.khem@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> CC: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221218220740.315839-1-raj.khem@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Marcel Holtmann [Mon, 19 Dec 2022 17:53:37 +0000 (18:53 +0100)]
libvhost-user: Switch to unsigned int for inuse field in struct VuVirtq
It seems there is no need to keep the inuse field signed and end up with
compiler warnings for sign-compare.
CC libvhost-user.o
libvhost-user.c: In function ‘vu_queue_pop’:
libvhost-user.c:2763:19: error: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Werror=sign-compare]
2763 | if (vq->inuse >= vq->vring.num) {
| ^~
libvhost-user.c: In function ‘vu_queue_rewind’:
libvhost-user.c:2808:13: error: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Werror=sign-compare]
2808 | if (num > vq->inuse) {
| ^
Instead of casting the comparision to unsigned int, just make the inuse
field unsigned int in the fist place.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Message-Id: <20221219175337.377435-8-marcel@holtmann.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Philippe Mathieu-Daudé [Tue, 13 Dec 2022 11:17:07 +0000 (12:17 +0100)]
hw/virtio: Extract QMP related code virtio-qmp.c
The monitor decoders are the only functions using the CONFIG_xxx
definitions declared in the target specific CONFIG_DEVICES header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-7-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <a class="moz-txt-link-rfc2396E" href="mailto:philmd@linaro.org"><philmd@linaro.org></a>
Philippe Mathieu-Daudé [Tue, 13 Dec 2022 11:17:06 +0000 (12:17 +0100)]
hw/virtio: Extract config read/write accessors to virtio-config-io.c
These config helpers use the target-dependent LD/ST API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-6-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Philippe Mathieu-Daudé [Tue, 13 Dec 2022 11:17:05 +0000 (12:17 +0100)]
hw/virtio: Constify qmp_virtio_feature_map_t[]
These arrays are only accessed read-only, move them to .rodata.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-5-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jonah Palmer<jonah.palmer@oracle.com> Signed-off-by: Philippe Mathieu-Daudé <a class="moz-txt-link-rfc2396E" href="mailto:philmd@linaro.org"><philmd@linaro.org></a>
Philippe Mathieu-Daudé [Tue, 13 Dec 2022 11:17:04 +0000 (12:17 +0100)]
hw/virtio: Guard and restrict scope of qmp_virtio_feature_map_t[]
Commit f3034ad71f ("qmp: decode feature & status bits in
virtio-status") did not guard all qmp_virtio_feature_map_t
arrays with the corresponding #ifdef'ry used in
qmp_decode_features(). Fix that and reduce the arrays scope
by declaring them static.
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-4-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jonah Palmer<jonah.palmer@oracle.com> Suggested-by: Richard Henderson <a class="moz-txt-link-rfc2396E" href="mailto:richard.henderson@linaro.org"><richard.henderson@linaro.org></a> Signed-off-by: Philippe Mathieu-Daudé <a class="moz-txt-link-rfc2396E" href="mailto:philmd@linaro.org"><philmd@linaro.org></a>
Since virtio_ss[] is added to specific_ss[], rename it as
specific_virtio_ss[] to make it clearer.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-3-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Philippe Mathieu-Daudé [Tue, 13 Dec 2022 11:17:02 +0000 (12:17 +0100)]
hw/virtio: Add missing "hw/core/cpu.h" include
virtio.c uses target_words_bigendian() which is declared in
"hw/core/cpu.h". Add the missing header to avoid when refactoring:
hw/virtio/virtio.c:2451:9: error: implicit declaration of function 'target_words_bigendian' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
if (target_words_bigendian()) {
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-2-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Ben Widawsky <bwidawsk@kernel.org> Cc: qemu-devel@nongnu.org Cc: linux-cxl@vger.kernel.org Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Message-Id: <20221213-ira-flexbus-port-v2-1-eaa48d0e0700@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Philippe Mathieu-Daudé [Mon, 12 Dec 2022 10:51:15 +0000 (11:51 +0100)]
hw/acpi: Rename tco.c -> ich9_tco.c
tco.c contains the ICH9 implementation of its "total cost
of ownership". Rename it accordingly to emphasis this is
a part of the ICH9 model.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221212105115.2113-1-philmd@linaro.org> Acked-by: Igor Mammedov <imammedo@redhat.com>
projects / users / dwmw2 / qemu.git / log