net: make nb_nics and nd_table[] static in net/net.c

Also remove the stale declaration of host_net_devices; the actual
definition was removed long ago in commit 7cc28cb06104 ("net: Remove
the deprecated 'host_net_add' and 'host_net_remove' HMP commands")

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

net: remove qemu_show_nic_models(), qemu_find_nic_model()

These old functions can be removed now too. Let net_param_nic() print
the full set of network devices directly, and also make it note that a
list more specific to this platform/config will be available by using
'-nic model=help' instead.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/pci: remove pci_nic_init_nofail()

This function is no longer used, as all its callers have been converted
to use pci_init_nic_devices() instead.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

net: remove qemu_check_nic_model()

There are no callers of this function any more, as they have all been
converted to qemu_{create,configure}_nic_device().

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/xtensa/xtfpga: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/sparc/sun4m: use qemu_find_nic_info()

Obtain the MAC address from the NIC configuration if there is one, or
generate one explicitly so that it can be placed in the PROM.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/s390x/s390-virtio-ccw: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Huth <thuth@redhat.com>

hw/riscv: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/openrisc/openrisc_sim: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/lasi_i82596: use qemu_create_nic_device()

Create the device only if there is a corresponding NIC config for it.
Remove the explicit check on nd_table[0].used from hw/hppa/machine.c
which (since commit d8a3220005d7) tries to do the same thing.

The lasi_82596 support has been disabled since it was first introduced,
since enable_lasi_lan() has always been zero. This allows the user to
enable it by explicitly requesting a NIC model 'lasi_82596' or just
using the alias 'lasi'. Otherwise, it defaults to a PCI NIC as before.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/lasi_i82596: Re-enable build

When converting to the shiny build-system-du-jour, a typo prevented the
last_i82596 driver from being built. Correct the config option name to
re-enable the build. And include "sysemu/sysemu.h" so it actually builds.

Fixes: b1419fa66558 ("meson: convert hw/net")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2144
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/jazz: use qemu_find_nic_info()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/mipssim: use qemu_create_nic_device()

The MIPS SIM platform instantiates its NIC only if a corresponding
configuration exists for it. Use qemu_create_nic_device() function for
that.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/microblaze: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/m68k/q800: use qemu_find_nic_info()

If a corresponding NIC configuration was found, it will have a MAC address
already assigned, so use that. Else, generate and assign a default one.

Using qemu_find_nic_info() is simpler than the alternative of using
qemu_configure_nic_device() and then having to fetch the "mac" property
as a string and convert it.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/m68k/mcf5208: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/etraxfs-eth: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/stellaris: use qemu_find_nic_info()

Rather than just using qemu_configure_nic_device(), populate the MAC
address in the system-registers device by peeking at the NICInfo before
it's assigned to the device.

Generate the MAC address early, if there is no matching -nic option.
Otherwise the MAC address wouldn't be generated until net_client_init1()
runs.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/npcm7xx: use qemu_configure_nic_device, allow emc0/emc1 as aliases

Also update the test to specify which device to attach the test socket
to, and remove the comment lamenting the fact that we can't do so.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/highbank: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/lan9118: use qemu_configure_nic_device()

Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preseve the existing behaviour for now.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/smc91c111: use qemu_configure_nic_device()

Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preserve the existing behaviour of each caller for now.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/fsl: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/exynos4: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/aspeed: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>

hw/arm/allwinner: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/xtensa/virt: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/sparc64/sun4u: use pci_init_nic_devices()

The first sunhme NIC gets placed a function 1 on slot 1 of PCI bus A,
and the rest are dynamically assigned on PCI bus B.

Previously, any PCI NIC would get the special treatment purely by
virtue of being first in the list.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/sh4/r2d: use pci_init_nic_devices()

Previously, the first PCI NIC would be assigned to slot 2 even if the
user override the model and made it something other than an rtl8139
which is the default. Everything else would be dynamically assigned.

Now, the first rtl8139 gets slot 2 and everything else is dynamic.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>

hw/ppc: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/ppc/spapr: use qemu_get_nic_info() and pci_init_nic_devices()

Avoid directly referencing nd_table[] by first instantiating any
spapr-vlan devices using a qemu_get_nic_info() loop, then calling
pci_init_nic_devices() to do the rest.

No functional change intended.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/ppc/prep: use pci_init_nic_devices()

Previously, the first PCI NIC would be placed in PCI slot 3 and the rest
would be dynamically assigned. Even if the user overrode the default NIC
type and made it something other than PCNet.

Now, the first PCNet NIC (that is, anything not explicitly specified
to be anything different) will go to slot 3 even if it isn't the first
NIC specified on the command line. And anything else will be dynamically
assigned.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/loongson3_virt: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/malta: use pci_init_nic_devices()

The Malta board setup code would previously place the first NIC into PCI
slot 11 if was a PCNet card, and the rest (including the first if it was
anything other than a PCNet card) would be dynamically assigned.

Now it will place any PCNet NIC into slot 11, and then anything else will
be dynamically assigned.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/fuloong2e: use pci_init_nic_devices()

The previous behaviour was: *if* the first NIC specified on the command
line was an RTL8139 (or unspecified model) then it gets assigned to PCI
slot 7, which is where the Fuloong board had an RTL8139. All other
devices (including the first, if it was specified as anything other than
an rtl8319) get dynamically assigned on the bus.

The new behaviour is subtly different: If the first NIC was given a
specific model *other* than rtl8139, and a subsequent NIC was not,
then the rtl8139 (or unspecified) NIC will go to slot 7 and the rest
will be dynamically assigned.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/loongarch: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Song Gao <gaosong@loongson.cn>

hw/hppa: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/virt: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/sbsa-ref: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>

hw/alpha/dp264: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/xen: use qemu_create_nic_bus_devices() to instantiate Xen NICs

When instantiating XenBus itself, for each NIC which is configured with
either the model unspecified, or set to to "xen" or "xen-net-device",
create a corresponding xen-net-device for it.

Now we can revert the previous more hackish version which relied on the
platform code explicitly registering the NICs on its own XenBus, having
returned the BusState* from xen_bus_init() itself.

This also fixes the setup for Xen PV guests, which was previously broken
in various ways and never actually managed to peer with the netdev.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>

hw/i386/pc: use qemu_get_nic_info() and pci_init_nic_devices()

Eliminate direct access to nd_table[] and nb_nics by processing the the
Xen and ISA NICs first and then calling pci_init_nic_devices() for the
rest.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>

hw/pci: add pci_init_nic_devices(), pci_init_nic_in_slot()

The loop over nd_table[] to add PCI NICs is repeated in quite a few
places. Add a helper function to do it.

Some platforms also try to instantiate a specific model in a specific
slot, to match the real hardware. Add pci_init_nic_in_slot() for that
purpose.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>

net: add qemu_create_nic_bus_devices()

This will instantiate any NICs which live on a given bus type. Each bus
is allowed *one* substitution (for PCI it's virtio → virtio-net-pci, for
Xen it's xen → xen-net-device; no point in overengineering it unless we
actually want more).

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>

net: report list of available models according to platform

By noting the models for which a configuration was requested, we can give
the user an accurate list of which NIC models were actually available on
the platform/configuration that was otherwise chosen.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>

net: add qemu_{configure,create}_nic_device(), qemu_find_nic_info()

Most code which directly accesses nd_table[] and nb_nics uses them for
one of two things. Either "I have created a NIC device and I'd like a
configuration for it", or "I will create a NIC device *if* there is a
configuration for it".  With some variants on the theme around whether
they actually *check* if the model specified in the configuration is
the right one.

Provide functions which perform both of those, allowing platforms to
be a little more consistent and as a step towards making nd_table[]
and nb_nics private to the net code.

One might argue that platforms ought to be consistent about whether
they create the unconfigured devices or not, but making significant
user-visible changes is explicitly *not* the intent right now.

The new functions leave the 'model' field of the NICInfo as NULL after
using it for the default NIC model, unlike the qemu_check_nic_model()
function which does set nd->model to match default_model explicitly.
This is acceptable because there is no code which consumes nd->model
except this NIC-matching code in net/net.c, and no reasonable excuse
for any code wanting to use nd->model in future.

Also export the qemu_find_nic_info() helper, as some platforms have
special cases they need to handle.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>

Merge tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu into staging

aspeed queue:

* Update of buildroot images to 2023.11 (6.6.3 kernel)
* Check of the valid CPU type supported by aspeed machines
* Simplified models for the IBM's FSI bus and the Aspeed
  controller bridge

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmW7Sa8ACgkQUaNDx8/7
# 7KG7mw/8DbMJY6aqgq5YANszzem1ktJphPCNxq081cbczCOUpCNX4aL+0/ANvxxD
# lbJQB+SZeIRmuFbxYPhq68rtzB4vG7tsQpns4H33EPKT4vuzF70lq4fgptMiun3q
# 1ZJ2LF3jonvQWdhbC17wzAQz0FFb4F7XOxz++UL4okPsgzsYItnd+TWs8q7+erRb
# 84UwN+eBTBAl/FiNk679/tBTqAfCVGgQ7dzotr4f3tg5POvrGOrlEjAn0O+dGGDj
# wgILmpEBsTsilRB1tz8Kw0j/v/VkHz1DJu45lRAV9CIrN22iKcjMilNGgNDT8kcI
# yAlxAw3iN+hVFqDov8wFPjDYd/Qw2oRAPy2Kd14hW9xL8zBOTms1JK5L0PS2+Feo
# ZjMJ2cOJq3t4Wt1ZXRhgHfF4ANwP0OZ/y9bHCy3CkBljEeiTQbikHP9gVV4qHXZH
# 4Q0HnDZQwAgobw3CmZ8jVx1dQueqy3ycuvkhCyv3S0l/tdbtXDtr5pNNu3dAP/PJ
# 3nifLdRImhDvxxO9GKaCdUVLzELzMJl0GrgAsVJPKVnKHA4IiVKmB+XcW9IUbfy/
# 3zA2wHJLrEF+MF6MsuNcEYCCqUvyNLm7rUrXk1wNLXpCJ35bbW5IYy7Ty/8E2GHb
# D5Cv/EPNhMBiNA4+HqQlMOTC13Ozv2qwCuWYCh2Ik8mnzaEiyTo=
# =0C5S
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Feb 2024 07:35:11 GMT
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu:
  hw/fsi: Update MAINTAINER list
  hw/fsi: Added FSI documentation
  hw/fsi: Added qtest
  hw/arm: Hook up FSI module in AST2600
  hw/fsi: Aspeed APB2OPB & On-chip peripheral bus
  hw/fsi: Introduce IBM's FSI master
  hw/fsi: Introduce IBM's cfam
  hw/fsi: Introduce IBM's fsi-slave model
  hw/fsi: Introduce IBM's FSI Bus
  hw/fsi: Introduce IBM's scratchpad device
  hw/fsi: Introduce IBM's Local bus
  hw/arm/aspeed: Check for CPU types in machine_run_board_init()
  hw/arm/aspeed: Introduce aspeed_soc_cpu_type() helper
  hw/arm/aspeed: Init CPU defaults in a common helper
  hw/arm/aspeed: Set default CPU count using aspeed_soc_num_cpus()
  hw/arm/aspeed: Remove dead code
  tests/avocado/machine_aspeed.py: Update buildroot images to 2023.11

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-loongarch-20240201' of https://gitlab.com/gaosong/qemu into staging

pull-loongarch-20240201

# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZbtI0AAKCRBAov/yOSY+
# 35J4A/9ehl15MIrkByqq8QNQnG4PbKWOTcTev6P0sEAhzPUtBpcGPesoHnt+DFuk
# f3WluWsfnFY9pCRgB9VBSpy89O6Efj187bpekT/PD5svPOXoUmETafv1p2vsVrpj
# huMNijt7I/LAXUCb2gA5pnNH9vrrJ8E5kQlgmYfh35cEhHObMQ==
# =Q9Gn
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Feb 2024 07:31:28 GMT
# gpg:                using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C  6C2C 40A2 FFF2 3926 3EDF

* tag 'pull-loongarch-20240201' of https://gitlab.com/gaosong/qemu:
  target/loongarch: Fix qtest test-hmp error when KVM-only build

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/fsi: Update MAINTAINER list

Add maintainer for IBM FSI model

Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - slight change in commit log
       - fixed file list ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/fsi: Added FSI documentation

Documentation for IBM FSI model.

Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg : - Removed source file list
        - Fixed aspeed machine reference ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/fsi: Added qtest

Added basic qtests for FSI model.

Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[ clg: aspeed-fsi-test.c -> aspeed_fsi-test.c to match other filenames ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm: Hook up FSI module in AST2600

This patchset introduces IBM's Flexible Service Interface(FSI).

Time for some fun with inter-processor buses. FSI allows a service
processor access to the internal buses of a host POWER processor to
perform configuration or debugging.

FSI has long existed in POWER processes and so comes with some baggage,
including how it has been integrated into the ASPEED SoC.

Working backwards from the POWER processor, the fundamental pieces of
interest for the implementation are:

1. The Common FRU Access Macro (CFAM), an address space containing
   various "engines" that drive accesses on buses internal and external
   to the POWER chip. Examples include the SBEFIFO and I2C masters. The
   engines hang off of an internal Local Bus (LBUS) which is described
   by the CFAM configuration block.

2. The FSI slave: The slave is the terminal point of the FSI bus for
   FSI symbols addressed to it. Slaves can be cascaded off of one
   another. The slave's configuration registers appear in address space
   of the CFAM to which it is attached.

3. The FSI master: A controller in the platform service processor (e.g.
   BMC) driving CFAM engine accesses into the POWER chip. At the
   hardware level FSI is a bit-based protocol supporting synchronous and
   DMA-driven accesses of engines in a CFAM.

4. The On-Chip Peripheral Bus (OPB): A low-speed bus typically found in
   POWER processors. This now makes an appearance in the ASPEED SoC due
   to tight integration of the FSI master IP with the OPB, mainly the
   existence of an MMIO-mapping of the CFAM address straight onto a
   sub-region of the OPB address space.

5. An APB-to-OPB bridge enabling access to the OPB from the ARM core in
   the AST2600. Hardware limitations prevent the OPB from being directly
   mapped into APB, so all accesses are indirect through the bridge.

The implementation appears as following in the qemu device tree:

    (qemu) info qtree
    bus: main-system-bus
      type System
      ...
      dev: aspeed.apb2opb, id ""
        gpio-out "sysbus-irq" 1
        mmio 000000001e79b000/0000000000001000
        bus: opb.1
          type opb
          dev: fsi.master, id ""
            bus: fsi.bus.1
              type fsi.bus
              dev: cfam.config, id ""
              dev: cfam, id ""
                bus: fsi.lbus.1
                  type lbus
                  dev: scratchpad, id ""
                    address = 0 (0x0)
        bus: opb.0
          type opb
          dev: fsi.master, id ""
            bus: fsi.bus.0
              type fsi.bus
              dev: cfam.config, id ""
              dev: cfam, id ""
                bus: fsi.lbus.0
                  type lbus
                  dev: scratchpad, id ""
                    address = 0 (0x0)

The LBUS is modelled to maintain the qdev bus hierarchy and to take
advantage of the object model to automatically generate the CFAM
configuration block. The configuration block presents engines in the
order they are attached to the CFAM's LBUS. Engine implementations
should subclass the LBusDevice and set the 'config' member of
LBusDeviceClass to match the engine's type.

CFAM designs offer a lot of flexibility, for instance it is possible for
a CFAM to be simultaneously driven from multiple FSI links. The modeling
is not so complete; it's assumed that each CFAM is attached to a single
FSI slave (as a consequence the CFAM subclasses the FSI slave).

As for FSI, its symbols and wire-protocol are not modelled at all. This
is not necessary to get FSI off the ground thanks to the mapping of the
CFAM address space onto the OPB address space - the models follow this
directly and map the CFAM memory region into the OPB's memory region.
Future work includes supporting more advanced accesses that drive the
FSI master directly rather than indirectly via the CFAM mapping, which
will require implementing the FSI state machine and methods for each of
the FSI symbols on the slave. Further down the track we can also look at
supporting the bitbanged SoftFSI drivers in Linux by extending the FSI
slave model to resolve sequences of GPIO IRQs into FSI symbols, and
calling the associated symbol method on the slave to map the access onto
the CFAM.

Testing:
    Tested by reading cfam config address 0 on rainier machine type.

    root@p10bmc:~# pdbg -a getcfam 0x0
    p0: 0x0 = 0xc0022d15

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/fsi: Aspeed APB2OPB & On-chip peripheral bus

This is a part of patchset where IBM's Flexible Service Interface is
introduced.

An APB-to-OPB bridge enabling access to the OPB from the ARM core in
the AST2600. Hardware limitations prevent the OPB from being directly
mapped into APB, so all accesses are indirect through the bridge.

The On-Chip Peripheral Bus (OPB): A low-speed bus typically found in
POWER processors. This now makes an appearance in the ASPEED SoC due
to tight integration of the FSI master IP with the OPB, mainly the
existence of an MMIO-mapping of the CFAM address straight onto a
sub-region of the OPB address space.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - moved FSIMasterState under AspeedAPB2OPBState
       - modified fsi_opb_fsi_master_address() and
         fsi_opb_opb2fsi_address()
       - instroduced fsi_aspeed_apb2opb_init()
       - reworked fsi_aspeed_apb2opb_realize()
       - removed FSIMasterState object and fsi_opb_realize()
       - simplified OPBus
       - introduced fsi_aspeed_apb2opb_rw to fix endianness issue ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/loongarch: Fix qtest test-hmp error when KVM-only build

The cc->sysemu_ops->get_phys_page_debug() is NULL when
KVM-only build. this patch fixes it.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240125061401.52526-1-gaosong@loongson.cn>

hw/fsi: Introduce IBM's FSI master

This is a part of patchset where IBM's Flexible Service Interface is
introduced.

This commit models the FSI master. CFAM is hanging out of FSI master which is a bus controller.

The FSI master: A controller in the platform service processor (e.g.
BMC) driving CFAM engine accesses into the POWER chip. At the
hardware level FSI is a bit-based protocol supporting synchronous and
DMA-driven accesses of engines in a CFAM.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - move FSICFAMState object under FSIMasterState
       - introduced fsi_master_init()
       - reworked fsi_master_realize()
       - dropped FSIBus definition ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/fsi: Introduce IBM's cfam

This is a part of patchset where IBM's Flexible Service Interface is
introduced.

The Common FRU Access Macro (CFAM), an address space containing
various "engines" that drive accesses on busses internal and external
to the POWER chip. Examples include the SBEFIFO and I2C masters. The
engines hang off of an internal Local Bus (LBUS) which is described
by the CFAM configuration block.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - moved object FSIScratchPad under FSICFAMState
       - moved FSIScratchPad code under cfam.c
       - introduced fsi_cfam_instance_init()
       - reworked fsi_cfam_realize() ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/fsi: Introduce IBM's fsi-slave model

This is a part of patchset where IBM's Flexible Service Interface is
introduced.

The FSI slave: The slave is the terminal point of the FSI bus for
FSI symbols addressed to it. Slaves can be cascaded off of one
another. The slave's configuration registers appear in address space
of the CFAM to which it is attached.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/fsi: Introduce IBM's FSI Bus

This is a part of patchset where FSI bus is introduced.

The FSI bus is a simple bus where FSI master is attached.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - removed include/hw/fsi/engine-scratchpad.h and
         hw/fsi/engine-scratchpad.c
       - dropped FSI_SCRATCHPAD
       - included FSIBus definition
       - dropped hw/fsi/trace-events changes ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/fsi: Introduce IBM's scratchpad device

This is a part of patchset where IBM's Flexible Service Interface is
introduced.

The scratchpad provides a set of non-functional registers. The firmware
is free to use them, hardware does not support any special management
support. The scratchpad registers can be read or written from LBUS
slave. The scratch pad is managed under FSI CFAM state.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - moved object FSIScratchPad under FSICFAMState
       - moved FSIScratchPad code under cfam.c ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/fsi: Introduce IBM's Local bus

This is a part of patchset where IBM's Flexible Service Interface is
introduced.

The LBUS is modelled to maintain mapped memory for the devices. The
memory is mapped after CFAM config, peek table and FSI slave registers.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - removed lbus_add_device() bc unused
       - removed lbus_create_device() bc used only once
       - removed "address" property
       - updated meson.build to build fsi dir
       - included an empty hw/fsi/trace-events ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm/aspeed: Check for CPU types in machine_run_board_init()

Aspeed SoCs use a single CPU type (set as AspeedSoCClass::cpu_type).
Convert it to a NULL-terminated array (of a single non-NULL element).

Set MachineClass::valid_cpu_types[] to use the common machine code
to provide hints when the requested CPU is invalid (see commit
e702cbc19e ("machine: Improve is_cpu_type_supported()").

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm/aspeed: Introduce aspeed_soc_cpu_type() helper

In order to alter AspeedSoCClass::cpu_type in the next
commit, introduce the aspeed_soc_cpu_type() helper to
retrieve the per-SoC CPU type from AspeedSoCClass.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm/aspeed: Init CPU defaults in a common helper

Rework aspeed_soc_num_cpus() as a new init_cpus_defaults()
helper to reduce code duplication.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm/aspeed: Set default CPU count using aspeed_soc_num_cpus()

Since commit b7f1a0cb76 ("arm/aspeed: Compute the number
of CPUs from the SoC definition") Aspeed machines use the
aspeed_soc_num_cpus() helper to set the number of CPUs.

Use it for the ast1030-evb (commit 356b230ed1 "aspeed/soc:
Add AST1030 support") and supermicrox11-bmc (commit 40a38df55e
"hw/arm/aspeed: Add board model for Supermicro X11 BMC") machines.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm/aspeed: Remove dead code

Remove copy/paste typo from commit 6c323aba40 ("hw/arm/aspeed:
Adding new machine Tiogapass in QEMU").

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

tests/avocado/machine_aspeed.py: Update buildroot images to 2023.11

Compared to mainline buildroot, these images have some customization :

- Linux version is bumped to 6.6.3 and built with a custom config
- U-Boot is switched to the one provided by OpenBMC for more support
- defconfigs extra tools for dev

See branch [1] for more details.

There are a few changes since last update, commit ed1f5ff84209. Images
all have a password now and I2C devices have been updated in the Linux
ast2600-evb device tree [2]. Do the necessary adjustements.

[1] https://github.com/legoater/buildroot/commits/aspeed-2023.11
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9deb10cf160e

Signed-off-by: Cédric Le Goater <clg@kaod.org>

Merge tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu into staging

trivial patches for 2024-01-31

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmW6NScPHG1qdEB0bHMu
# bXNrLnJ1AAoJEHAbT2saaT5ZdQYH/2fhfhZotH0V2qAcMxlOoHbAE9UhZNRsSYtf
# QFP0GXFYFAMm7LHkPUbvKgO7LylKWAOMn/zKZqgj1Vf1EpoKQ2FwLtR/buDz86Ec
# pi2OrDPRA7Ay5c3ow3YZZkUOhQTTcR5rNjYctPtt/J4j8ol/z5vre7weJIg2bCJe
# zI7vIVg7iFFzbkXY20KHngJ5nDC+aEm7WaGlxAP8kfkvy324Wy9O2k8qu2J5zbLT
# HGvh3rwEDvRTYe4CaKFFHWNV0m4092HAr/dJBobugI5VZ6QQpK6Tgy8N+4ZrCHD2
# SjUKeym85VTOYGuY8b18fk5MQK2SzsfBUJ4x8VGC75W4mJ8agdc=
# =HImO
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 31 Jan 2024 11:55:19 GMT
# gpg:                using RSA key 7B73BAD68BE7A2C289314B22701B4F6B1A693E59
# gpg:                issuer "mjt@tls.msk.ru"
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full]
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>" [full]
# gpg:                 aka "Michael Tokarev <mjt@debian.org>" [full]
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu: (21 commits)
  hw/hyperv: Include missing headers
  hw/intc/xics: Include missing 'cpu.h' header
  hw/arm: Add `\n` to hint message
  hw/loongarch: Add `\n` to hint message
  hw/i386: Add `\n` to hint message
  backends/hostmem: Fix block comments style (checkpatch.pl warnings)
  misc: Clean up includes
  riscv: Clean up includes
  cxl: Clean up includes
  include: Clean up includes
  m68k: Clean up includes
  acpi: Clean up includes
  aspeed: Clean up includes
  disas/riscv: Clean up includes
  hyperv: Clean up includes
  scripts/clean-includes: Update exclude list
  mailmap: Fix Stefan Weil email
  qemu-docs: Update options for graphical frontends
  qapi/migration.json: Fix the member name for MigrationCapability
  colo: examples: remove mentions of script= and (wrong) downscript=
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging

Pull request

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmW5b1IACgkQnKSrs4Gr
# c8geoQf8DU8Z8jlvy1luuBZLq3R7hnC7c3Wzje0atLGP++pX6QUXfAgGDsTTIQeh
# XWmkFhbOBurhToH8YpgPyNG8ZWYd9+NIvLnIJiWDklNDZg2zC00aOi8yBEbsgyFb
# 50HJA30AAHq8PuctCzhGhENLxvBvNDNME74SwYH7FSIK5x/nA1XBHDZsjst1/Hk2
# 1loLbVWElbU28Xll7hI862SAb8RULC/sRQomkQAhpydxq4TApNuRwvpRfPNFwFJ0
# +dCquCJEfV6wfD62xg2CBGA5DrD9T7ADxmCYl4DQyp3HIRKXAptjgLsx3aZaIr1z
# KAnCRNUXRuLgRZf7b9I+HhxGISoNng==
# =/bBL
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 30 Jan 2024 21:51:14 GMT
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
  hw/block/block.c: improve confusing blk_check_size_and_read_all() error
  hw/core/qdev.c: add qdev_get_human_name()
  pflash: fix sectors vs bytes confusion in blk_pread_nonzeroes()
  block/blkio: Make s->mem_region_alignment be 64 bits
  block/io_uring: improve error message when init fails

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/block/block.c: improve confusing blk_check_size_and_read_all() error

In cases where a device tries to read more bytes than the block device
contains, the error is vague: "device requires X bytes, block backend
provides Y bytes".

This patch changes the errors of this function to include the block
backend name, the device id and device type name where appropriate.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-id: 7260eadff22c08457740117c1bb7bd2b4353acb9.1706598705.git.manos.pitsidianakis@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

hw/core/qdev.c: add qdev_get_human_name()

Add a simple method to return some kind of human readable identifier for
use in error messages.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-id: 8b566bfced98ae44be1fcc1f8e7215f0c3393aa1.1706598705.git.manos.pitsidianakis@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

pflash: fix sectors vs bytes confusion in blk_pread_nonzeroes()

The following expression is incorrect because blk_pread_nonzeroes()
deals in units of bytes, not sectors:

  bytes = MIN(size - offset, BDRV_REQUEST_MAX_SECTORS)
                                              ^^^^^^^

BDRV_REQUEST_MAX_BYTES is the appropriate constant.

Fixes: a4b15a8b9ef2 ("pflash: Only read non-zero parts of backend image")
Cc: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240130002712.257815-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

block/blkio: Make s->mem_region_alignment be 64 bits

With GCC 14 the code failed to compile on i686 (and was wrong for any
version of GCC):

../block/blkio.c: In function ‘blkio_file_open’:
../block/blkio.c:857:28: error: passing argument 3 of ‘blkio_get_uint64’ from incompatible pointer type [-Wincompatible-pointer-types]
  857 |                            &s->mem_region_alignment);
      |                            ^~~~~~~~~~~~~~~~~~~~~~~~
      |                            |
      |                            size_t * {aka unsigned int *}
In file included from ../block/blkio.c:12:
/usr/include/blkio.h:49:67: note: expected ‘uint64_t *’ {aka ‘long long unsigned int *’} but argument is of type ‘size_t *’ {aka ‘unsigned int *’}
   49 | int blkio_get_uint64(struct blkio *b, const char *name, uint64_t *value);
      |                                                         ~~~~~~~~~~^~~~~

Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20240130122006.2977938-1-rjones@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

block/io_uring: improve error message when init fails

The man page for io_uring_queue_init states:

> io_uring_queue_init(3) returns 0 on success and -errno on failure.

and the man page for io_uring_setup (which is one of the functions
where the return value of io_uring_queue_init() can come from) states:

> On error, a negative error code is returned. The caller should not
> rely on errno variable.

Tested using 'sysctl kernel.io_uring_disabled=2'. Output before this
change:

> failed to init linux io_uring ring

Output after this change:

> failed to init linux io_uring ring: Operation not permitted

Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240123135044.204985-1-f.ebner@proxmox.com>

hw/hyperv: Include missing headers

Include missing headers in order to avoid when refactoring
unrelated headers:

  hw/hyperv/hyperv.c:33:18: error: field ‘msg_page_mr’ has incomplete type
    33 |     MemoryRegion msg_page_mr;
       |                  ^~~~~~~~~~~
  hw/hyperv/hyperv.c: In function ‘synic_update’:
  hw/hyperv/hyperv.c:64:13: error: implicit declaration of function ‘memory_region_del_subregion’ [-Werror=implicit-function-declaration]
    64 |             memory_region_del_subregion(get_system_memory(),
       |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  hw/hyperv/hyperv.c: In function ‘hyperv_hcall_signal_event’:
  hw/hyperv/hyperv.c:683:17: error: implicit declaration of function ‘ldq_phys’; did you mean ‘ldub_phys’? [-Werror=implicit-function-declaration]
   683 |         param = ldq_phys(&address_space_memory, addr);
       |                 ^~~~~~~~
       |                 ldub_phys
  hw/hyperv/hyperv.c:683:17: error: nested extern declaration of ‘ldq_phys’ [-Werror=nested-externs]
  hw/hyperv/hyperv.c: In function ‘hyperv_hcall_retreive_dbg_data’:
  hw/hyperv/hyperv.c:792:24: error: ‘TARGET_PAGE_SIZE’ undeclared (first use in this function); did you mean ‘TARGET_PAGE_BITS’?
   792 |     msg.u.recv.count = TARGET_PAGE_SIZE - sizeof(*debug_data_out);
       |                        ^~~~~~~~~~~~~~~~
       |                        TARGET_PAGE_BITS
  hw/hyperv/hyperv.c: In function ‘hyperv_syndbg_send’:
  hw/hyperv/hyperv.c:885:16: error: ‘HV_SYNDBG_STATUS_INVALID’ undeclared (first use in this function)
   885 |         return HV_SYNDBG_STATUS_INVALID;
       |                ^~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw/intc/xics: Include missing 'cpu.h' header

Include missing headers in order to avoid when refactoring
unrelated headers:

  hw/intc/xics.c: In function 'icp_realize':
  hw/intc/xics.c:304:5: error: unknown type name 'PowerPCCPU'
    304 |     PowerPCCPU *cpu;
        |     ^~~~~~~~~~

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw/arm: Add `\n` to hint message

error_printf() doesn't add newlines.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw/loongarch: Add `\n` to hint message

error_printf() doesn't add newlines.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw/i386: Add `\n` to hint message

error_printf() doesn't add newlines.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

backends/hostmem: Fix block comments style (checkpatch.pl warnings)

While re-indenting code in host_memory_backend_memory_complete(),
we triggered various "Block comments use a leading /* on a separate
line" warnings from checkpatch.pl. Correct the comments style.

Fixes: e199f7ad4d ("backends: Simplify host_memory_backend_memory_complete()")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

misc: Clean up includes

This commit was created with scripts/clean-includes:
 ./scripts/clean-includes --git misc net/af-xdp.c plugins/*.c audio/pwaudio.c util/userfaultfd.c

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

riscv: Clean up includes

This commit was created with scripts/clean-includes:
 ./scripts/clean-includes --git riscv target/riscv/*.[ch]

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

cxl: Clean up includes

This commit was created with scripts/clean-includes.

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

include: Clean up includes

This commit was created with scripts/clean-includes:
 ./scripts/clean-includes --git include include/*/*.h include/*/*/*.h

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

m68k: Clean up includes

This commit was created with scripts/clean-includes:
./scripts/clean-includes --git m68k include/hw/audio/asc.h include/hw/m68k/*.h

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

acpi: Clean up includes

This commit was created with scripts/clean-includes:
 ./scripts/clean-includes --git acpi include/hw/*/*acpi.h hw/*/*acpi.c

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

aspeed: Clean up includes

This commit was created with scripts/clean-includes.

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

disas/riscv: Clean up includes

This commit was created with scripts/clean-includes:
 ./scripts/clean-includes --git disas/riscv disas/riscv*[ch]

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hyperv: Clean up includes

This commit was created with scripts/clean-includes:
 ./scripts/clean-includes --git hyperv hw/hyperv/*.[ch]

All .c should include qemu/osdep.h first.  The script performs three
related cleanups:

* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c  already includes
  it.  Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
  Drop these, too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

scripts/clean-includes: Update exclude list

Update the exclude list to exclude some more files which don't follow our
standard #include policy.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

mailmap: Fix Stefan Weil email

Commit 5204b499a6 ("mailmap: Fix Stefan Weil author email")
corrected authorship for patch received at qemu-devel@nongnu.org,
correct now for patch received at qemu-trivial@nongnu.org.

Update other authorship email for Stefan's commits.

Suggested-by: Stefan Weil <sw@weilnetz.de>
Fixes: d819fc9516 ("virtio-blk: Fix potential nullptr read access")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

qemu-docs: Update options for graphical frontends

The command line options `-ctrl-grab` and `-alt-grab` have been removed
in QEMU 7.1. Instead, use the `-display sdl,grab-mod=<modifiers>` option
to specify the grab modifiers.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2103
Signed-off-by: Yihuan Pan <xun794@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

qapi/migration.json: Fix the member name for MigrationCapability

s/@compression/@compress/

Fixes: 864128df46
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

colo: examples: remove mentions of script= and (wrong) downscript=

There's no need to repeat script=/etc/qemu-ifup in examples,
as it is already in there.  More, all examples uses incorrect
"down script=" (which should be "downscript=").

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>

dump: Fix HMP dump-guest-memory -z without -R

-z without -R has no effect: the dump format remains @elf.  Fix the
logic error so it becomes @kdump-zlib.

Fixes: e6549197f7ed (dump: Add command interface for kdump-raw formats)
Fixes: CID 1523841
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

Merge tag 'qga-pull-2024-01-30' of https://github.com/kostyanf14/qemu into staging

qga-pull-2024-01-30

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEwsLBCepDxjwUI+uE711egWG6hOcFAmW409sACgkQ711egWG6
# hOc0PxAAj0Lhgt70OpAGQd5ERBgdRbh2/pJkKvdWBZvUAkVyFEp6Wn1UEC9aRpdi
# g8KCfYWVpp4LKMm5Ok1/8MKzAKT0jJFKatX0iZy/sx5M0A7x2/cJWgTv69L41Ld3
# FoJM/a/te8VUSk/jPKMqf4G7BzqYyHDnAlcnLjnvUsUabnocjmpSSckCNWLtQ/Sz
# RCGOwaTJ4HKW9O7yuw4gcXeYf2G21UemkITLh7Kdv/6fqqlg3k2gRSQeQ11Xh9Tc
# Jst7511vs+9AvDVM67o84z6UQwlp+23IJb3PBG2Td+Odr7BDAturWE4yyqPtjcpf
# Kcy6uMO6ZNYSW9CAspIF271fObLBPdvvMCHabar8x3LwF/6SxdnVRnWbqVsY/LSZ
# j76VB7TashwxzgqXEqmSrJmCSiCU4L7k8+KU0XxqIg4howlHzoRlejuMZzVK8Hyt
# Cu5tqa6yq8+twxzP4qQhkvazGgYgWo/xNaZ8D3h6xxxZ4NE/hN24YodtyFV/NGWE
# VSvUpzTKettECcyPo3OGezOqcr0vW5Z776MQOsMQWAjwm3bjM8hMzuKglnJe7Lt4
# DAbreHQ5s+pELQnq/cv7AVAr3zy2AIpPq4xDPJUHunAh+kMFY3cHCNaKytiRqmf+
# kZtd4nSN9j5+0oE5jSiuPn9C96y3shGL95XR6WW0nN1ImWOVgx4=
# =Tl7c
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 30 Jan 2024 10:47:55 GMT
# gpg:                using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7
# gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: C2C2 C109 EA43 C63C 1423  EB84 EF5D 5E81 61BA 84E7

* tag 'qga-pull-2024-01-30' of https://github.com/kostyanf14/qemu:
  qga: Solaris has net/if_arp.h and netinet/if_ether.h but not ETHER_ADDR_LEN
  qga-win: Fix guest-get-fsinfo multi-disks collection
  tests/unit/test-qga: do not qualify executable paths
  guest-agent: improve help for --allow-rpcs and --block-rpcs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-tcg-20240130' of https://gitlab.com/rth7680/qemu into staging

linux-user: Allow gdbstub to ignore page protection
cpu-exec: simplify jump cache management
include/exec: Cleanups toward building accel/tcg once

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmW4LXcdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+CgAf8CdqkvKsUK9/5bu99
# 9E4kRBkR8KqWYvBfRs4IFmjoEdEa4sCujWrHliOcW7Kh+XlVyAPI9rZG32QkxCEQ
# hi9WXieXjfPLTTmrbeiq7cwxztSj8Z55wwvbxkrtFyGDQ0AMccp49tAvfejEb6VD
# Ssx96nWQDgryLrn+My+wMQjl9aVKUWp5vB8k12aAcpRXPH2yoGE2JHAZ1C743nA6
# rShiJAT78HwERcMXDeYmmriYg0s4Z4+A6ErTiXDnFgj87YanHZc0I/55G5Sh+pW8
# REicD3jwS0GHOOHL0K781FopE1wTM442GLVxobXoxUXsHEiO+3TK5JdEIqvSstYA
# fRB8Pg==
# =xZOe
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 29 Jan 2024 22:57:59 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* tag 'pull-tcg-20240130' of https://gitlab.com/rth7680/qemu: (31 commits)
  target/i386: Extract x86_cpu_exec_halt() from accel/tcg/
  accel/tcg: Introduce TCGCPUOps::cpu_exec_halt() handler
  accel/tcg: Inline need_replay_interrupt
  target/i386: Extract x86_need_replay_interrupt() from accel/tcg/
  accel/tcg: Introduce TCGCPUOps::need_replay_interrupt() handler
  accel/tcg: Use CPUState.cc instead of CPU_GET_CLASS in cpu-exec.c
  target/loongarch: Constify loongarch_tcg_ops
  include/qemu: Add TCGCPUOps typedef to typedefs.h
  accel/tcg: Un-inline icount_exit_request() for clarity
  accel/tcg: Rename tcg_cpus_exec() -> tcg_cpu_exec()
  accel/tcg: Rename tcg_cpus_destroy() -> tcg_cpu_destroy()
  accel/tcg: Rename tcg_ss[] -> tcg_specific_ss[] in meson
  accel/tcg: Move perf and debuginfo support to tcg/
  accel/tcg: Remove #ifdef TARGET_I386 from perf.c
  tcg: Make tb_cflags() usable from target-agnostic code
  accel/tcg: Make use of qemu_target_page_mask() in perf.c
  target: Make qemu_target_page_mask() available for *-user
  accel/tcg/cpu-exec: Use RCU_READ_LOCK_GUARD
  tests/tcg: Add the PROT_NONE gdbstub test
  tests/tcg: Factor out gdbstub test functions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qga: Solaris has net/if_arp.h and netinet/if_ether.h but not ETHER_ADDR_LEN

Solaris has net/if_arp.h and netinet/if_ether.h rather than net/ethernet.h,
but does not define ETHER_ADDR_LEN, instead providing ETHERADDRL.

Signed-off-by: Nick Briggs <nicholas.h.briggs@gmail.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>

qga-win: Fix guest-get-fsinfo multi-disks collection

When a volume has more than one disk, all disks cannot be
returned correctly because there is not enough malloced memory
for disk extents, so before executing DeviceIoControl for the
second time, get the correct size of the required memory space
to store all disk extents.

Details:
https://learn.microsoft.com/en-us/windows/win32/api/winioctl/ns-winioctl-volume_disk_extents

Signed-off-by: Peng Ji <peng.ji@smartx.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>

tests/unit/test-qga: do not qualify executable paths

guest-exec invocation does not need the full path of the executable to
execute. Using only the command names ensures correct execution of the
test on systems not adhering to the FHS.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>