Jens Axboe [Wed, 6 Oct 2021 12:34:11 +0000 (06:34 -0600)]
block: pre-allocate requests if plug is started and is a batch
The caller typically has a good (or even exact) idea of how many requests
it needs to submit. We can make the request/tag allocation a lot more
efficient if we just allocate N requests/tags upfront when we queue the
first bio from the batch.
Provide a new plug start helper that allows the caller to specify how many
IOs are expected. This sets plug->nr_ios, and we can use that for smarter
request allocation. The plug provides a holding spot for requests, and
request allocation will check it before calling into the normal request
allocation path.
The blk_finish_plug() is called, check if there are unused requests and
free them. This should not happen in normal operations. The exception is
if we get merging, then we may be left with requests that need freeing
when done.
This raises the per-core performance on my setup from ~5.8M to ~6.1M
IOPS.
Jens Axboe [Wed, 6 Oct 2021 18:01:07 +0000 (12:01 -0600)]
block: bump max plugged deferred size from 16 to 32
Particularly for NVMe with efficient deferred submission for many
requests, there are nice benefits to be seen by bumping the default max
plug count from 16 to 32. This is especially true for virtualized setups,
where the submit part is more expensive. But can be noticed even on
native hardware.
Reduce the multiple queue factor from 4 to 2, since we're changing the
default size.
While changing it, move the defines into the block layer private header.
These aren't values that anyone outside of the block layer uses, or
should use.
Jens Axboe [Tue, 5 Oct 2021 15:23:59 +0000 (09:23 -0600)]
block: inherit request start time from bio for BLK_CGROUP
Doing high IOPS testing with blk-cgroups enabled spends ~15-20% of the
time just doing ktime_get_ns() -> readtsc. We essentially read and
set the start time twice, one for the bio and then again when that bio
is mapped to a request.
Given that the time between the two is very short, inherit the bio
start time instead of reading it again. This cuts 1/3rd of the overhead
of the time keeping.
John Garry [Tue, 5 Oct 2021 10:23:37 +0000 (18:23 +0800)]
blk-mq: Use shared tags for shared sbitmap support
Currently we use separate sbitmap pairs and active_queues atomic_t for
shared sbitmap support.
However a full sets of static requests are used per HW queue, which is
quite wasteful, considering that the total number of requests usable at
any given time across all HW queues is limited by the shared sbitmap depth.
As such, it is considerably more memory efficient in the case of shared
sbitmap to allocate a set of static rqs per tag set or request queue, and
not per HW queue.
So replace the sbitmap pairs and active_queues atomic_t with a shared
tags per tagset and request queue, which will hold a set of shared static
rqs.
Since there is now no valid HW queue index to be passed to the blk_mq_ops
.init and .exit_request callbacks, pass an invalid index token. This
changes the semantics of the APIs, such that the callback would need to
validate the HW queue index before using it. Currently no user of shared
sbitmap actually uses the HW queue index (as would be expected).
John Garry [Tue, 5 Oct 2021 10:23:35 +0000 (18:23 +0800)]
blk-mq: Add blk_mq_alloc_map_and_rqs()
Add a function to combine allocating tags and the associated requests,
and factor out common patterns to use this new function.
Some function only call blk_mq_alloc_map_and_rqs() now, but more
functionality will be added later.
Also make blk_mq_alloc_rq_map() and blk_mq_alloc_rqs() static since they
are only used in blk-mq.c, and finally rename some functions for
conciseness and consistency with other function names:
- __blk_mq_alloc_map_and_{request -> rqs}()
- blk_mq_alloc_{map_and_requests -> set_map_and_rqs}()
John Garry [Tue, 5 Oct 2021 10:23:32 +0000 (18:23 +0800)]
blk-mq: Pass driver tags to blk_mq_clear_rq_mapping()
Function blk_mq_clear_rq_mapping() will be used for shared sbitmap tags
in future, so pass a driver tags pointer instead of the tagset container
and HW queue index.
John Garry [Tue, 5 Oct 2021 10:23:28 +0000 (18:23 +0800)]
blk-mq: Relocate shared sbitmap resize in blk_mq_update_nr_requests()
For shared sbitmap, if the call to blk_mq_tag_update_depth() was
successful for any hctx when hctx->sched_tags is not set, then it would be
successful for all (due to nature in which blk_mq_tag_update_depth()
fails).
As such, there is no need to call blk_mq_tag_resize_shared_sbitmap() for
each hctx. So relocate the call until after the hctx iteration under the
!q->elevator check, which is equivalent (to !hctx->sched_tags).
John Garry [Tue, 5 Oct 2021 10:23:26 +0000 (18:23 +0800)]
blk-mq: Change rqs check in blk_mq_free_rqs()
The original code in commit 24d2f90309b23 ("blk-mq: split out tag
initialization, support shared tags") would check tags->rqs is non-NULL and
then dereference tags->rqs[].
Then in commit 2af8cbe30531 ("blk-mq: split tag ->rqs[] into two"), we
started to dereference tags->static_rqs[], but continued to check non-NULL
tags->rqs.
Check tags->static_rqs as non-NULL instead, which is more logical.
In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline:
Prioritize high-priority requests""), this patch uses 'jiffies' instead
of ktime_get() in the code for aging lower priority requests.
This patch has been tested as follows:
Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler.
Result without and with this patch: 555 K IOPS.
Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler.
Result without and with this patch: about 380 K IOPS.
Ran the following script:
set -e
scriptdir=$(dirname "$0")
if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi
modprobe scsi_debug ndelay=1000000 max_queue=16
sd=''
while [ -z "$sd" ]; do
sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*)
done
echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire"
if [ -e /sys/fs/cgroup/io.prio.class ]; then
cd /sys/fs/cgroup
echo restrict-to-be >io.prio.class
echo +io > cgroup.subtree_control
else
cd /sys/fs/cgroup/blkio/
echo restrict-to-be >blkio.prio.class
fi
echo $$ >cgroup.procs
mkdir -p hipri
cd hipri
if [ -e io.prio.class ]; then
echo none-to-rt >io.prio.class
else
echo none-to-rt >blkio.prio.class
fi
{ "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & }
echo $$ >cgroup.procs
"${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt
Result:
* 11000 IOPS for the high-priority job
* 40 IOPS for the low-priority job
If the prio aging expiry time is changed from 100s into 0, the IOPS results
change into 6712 and 6796 IOPS.
The max-iops script is a script that runs fio with the following arguments:
--bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60
--norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j}
--iodepth=${arg_d} --iodepth_batch_submit=${arg_a}
--iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1}
--filename=${positional_argument_1}
Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org
[axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calculating the sum over all CPUs of per-CPU counters frequently is
inefficient. Hence switch from per-CPU to individual counters. Three
counters are protected by the mq-deadline spinlock since these are
only accessed from contexts that already hold that spinlock. The fourth
counter is atomic because protecting it with the mq-deadline spinlock
would trigger lock contention.
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210927220328.1410161-4-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Check a statistics invariant at module unload time. When running
blktests, the invariant is verified every time a request queue is
removed and hence is verified at least once per test.
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210927220328.1410161-3-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
block/mq-deadline: Improve request accounting further
The scheduler .insert_requests() callback is called when a request is
queued for the first time and also when it is requeued. Only count a
request the first time it is queued. Additionally, since the mq-deadline
scheduler only performs zone locking for requests that have been
inserted, skip the zone unlock code for requests that have not been
inserted into the mq-deadline scheduler.
Fixes: 38ba64d12d4c ("block/mq-deadline: Track I/O statistics") Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210927220328.1410161-2-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Mon, 20 Sep 2021 12:33:23 +0000 (14:33 +0200)]
block: move elevator.h to block/
Except for the features passed to blk_queue_required_elevator_features,
elevator.h is only needed internally to the block layer. Move the
ELEVATOR_F_* definitions to blkdev.h, and the move elevator.h to
block/, dropping all the spurious includes outside of that.
Christoph Hellwig [Mon, 20 Sep 2021 12:33:12 +0000 (14:33 +0200)]
mm: don't include <linux/blk-cgroup.h> in <linux/writeback.h>
blk-cgroup.h pulls in blkdev.h and thus pretty much all the block
headers. Break this dependency chain by turning wbc_blkcg_css into a
macro and dropping the blk-cgroup.h include.
Merge tag '5.15-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull ksmbd fixes from Steve French:
"Five fixes for the ksmbd kernel server, including three security
fixes:
- remove follow symlinks support
- use LOOKUP_BENEATH to prevent out of share access
- SMB3 compounding security fix
- fix for returning the default streams correctly, fixing a bug when
writing ppt or doc files from some clients
- logging more clearly that ksmbd is experimental (at module load
time)"
* tag '5.15-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: use LOOKUP_BENEATH to prevent the out of share access
ksmbd: remove follow symlinks support
ksmbd: check protocol id in ksmbd_verify_smb_message()
ksmbd: add default data stream name in FILE_STREAM_INFORMATION
ksmbd: log that server is experimental at module load
Merge tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Fix two EDAC drivers using the wrong value type for the DIMM mode"
* tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/dmc520: Assign the proper type to dimm->edac_mode
EDAC/synopsys: Fix wrong value type assignment for edac_mode
Merge tag 'thermal-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal fixes from Daniel Lezcano:
- Fix thermal shutdown after a suspend/resume due to a wrong TCC value
restored on Intel platform (Antoine Tenart)
- Fix potential buffer overflow when building the list of policies. The
buffer size is not updated after writing to it (Dan Carpenter)
- Fix wrong check against IS_ERR instead of NULL (Ansuel Smith)
* tag 'thermal-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/tsens: Fix wrong check for tzd in irq handlers
thermal/core: Potential buffer overflow in thermal_build_list_of_policies()
thermal/drivers/int340x: Do not set a wrong tcc offset on resume
Merge tag 'x86-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:
- Prevent sending the wrong signal when protection keys are enabled
and the kernel handles a fault in the vsyscall emulation.
- Invoke early_reserve_memory() before invoking e820_memory_setup()
which is required to make the Xen dom0 e820 hooks work correctly.
- Use the correct data type for the SETZ operand in the EMQCMDS
instruction wrapper.
- Prevent undefined behaviour to the potential unaligned accesss in
the instruction decoder library"
* tag 'x86-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses
x86/asm: Fix SETZ size enqcmds() build failure
x86/setup: Call early_reserve_memory() earlier
x86/fault: Fix wrong signal when vsyscall fails with pkey
Merge tag 'timers-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for the recently introduced regression in posix CPU
timers which failed to stop the timer when requested. That caused
unexpected signals to be sent to the process/thread causing
malfunction"
* tag 'timers-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Prevent spuriously armed 0-value itimer
Merge tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Work around a bad GIC integration on a Renesas platform which can't
handle byte-sized MMIO access
- Plug a potential memory leak in the GICv4 driver
- Fix a regression in the Armada 370-XP IPI code which was caused by
issuing EOI instack of ACK.
- A couple of small fixes here and there"
* tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic: Work around broken Renesas integration
irqchip/renesas-rza1: Use semicolons instead of commas
irqchip/gic-v3-its: Fix potential VPE leak on error
irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build
irqchip/mbigen: Repair non-kernel-doc notation
irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent
irqchip/armada-370-xp: Fix ack/eoi breakage
Documentation: Fix irq-domain.rst build warning
Subsystems affected by this patch series: xtensa, sh, ocfs2, scripts,
lib, and mm (memory-failure, kasan, damon, shmem, tools, pagecache,
debug, and pagemap)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: fix uninitialized use in overcommit_policy_handler
mm/memory_failure: fix the missing pte_unmap() call
kasan: always respect CONFIG_KASAN_STACK
sh: pgtable-3level: fix cast to pointer from integer of different size
mm/debug: sync up latest migrate_reason to migrate_reason_names
mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN
mm: fs: invalidate bh_lrus for only cold path
lib/zlib_inflate/inffast: check config in C to avoid unused function warning
tools/vm/page-types: remove dependency on opt_file for idle page tracking
scripts/sorttable: riscv: fix undeclared identifier 'EM_RISCV' error
ocfs2: drop acl cache for directories too
mm/shmem.c: fix judgment error in shmem_is_huge()
xtensa: increase size of gcc stack frame check
mm/damon: don't use strnlen() with known-bogus source length
kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS
mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Thirty-three fixes, I'm afraid.
Essentially the build up from the last couple of weeks while I've been
dealling with Linux Plumbers conference infrastructure issues. It's
mostly the usual assortment of spelling fixes and minor corrections.
The only core relevant changes are to the sd driver to reduce the spin
up message spew and fix a small memory leak on the freeing path"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (33 commits)
scsi: ses: Retry failed Send/Receive Diagnostic commands
scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT"
scsi: lpfc: Fix gcc -Wstringop-overread warning, again
scsi: lpfc: Use correct scnprintf() limit
scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn()
scsi: core: Remove 'current_tag'
scsi: acornscsi: Remove tagged queuing vestiges
scsi: fas216: Kill scmd->tag
scsi: qla2xxx: Restore initiator in dual mode
scsi: ufs: core: Unbreak the reset handler
scsi: sd_zbc: Support disks with more than 2**32 logical blocks
scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling"
scsi: bsg: Fix device unregistration
scsi: sd: Make sd_spinup_disk() less noisy
scsi: ufs: ufs-pci: Fix Intel LKF link stability
scsi: mpt3sas: Clean up some inconsistent indenting
scsi: megaraid: Clean up some inconsistent indenting
scsi: sr: Fix spelling mistake "does'nt" -> "doesn't"
scsi: Remove SCSI CDROM MAINTAINERS entry
scsi: megaraid: Fix Coccinelle warning
...
Merge tag 'io_uring-5.15-2021-09-25' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"This one looks a bit bigger than it is, but that's mainly because 2/3
of it is enabling IORING_OP_CLOSE to close direct file descriptors.
We've had a few folks using them and finding it confusing that the way
to close them is through using -1 for file update, this just brings
API symmetry for direct descriptors. Hence I think we should just do
this now and have a better API for 5.15 release. There's some room for
de-duplicating the close code, but we're leaving that for the next
merge window.
Outside of that, just small fixes:
- Poll race fixes (Hao)
- io-wq core dump exit fix (me)
- Reschedule around potentially intensive tctx and buffer iterators
on teardown (me)
- Fix for always ending up punting files update to io-wq (me)
- Put the provided buffer meta data under memcg accounting (me)
- Tweak for io_write(), removing dead code that was added with the
iterator changes in this release (Pavel)"
* tag 'io_uring-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
io_uring: make OP_CLOSE consistent with direct open
io_uring: kill extra checks in io_write()
io_uring: don't punt files update to io-wq unconditionally
io_uring: put provided buffer meta data under memcg accounting
io_uring: allow conditional reschedule for intensive iterators
io_uring: fix potential req refcount underflow
io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow
io_uring: fix race between poll completion and cancel_hash insertion
io-wq: ensure we exit if thread group is exiting
Merge tag 'block-5.15-2021-09-25' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- keep ctrl->namespaces ordered (Christoph Hellwig)
- fix incorrect h2cdata pdu offset accounting in nvme-tcp (Sagi
Grimberg)
- handled updated hw_queues in nvme-fc more carefully (Daniel
Wagner, James Smart)
- md lock order fix (Christoph)
- fallocate locking fix (Ming)
- blktrace UAF fix (Zhihao)
- rq-qos bio tracking fix (Ming)
* tag 'block-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
block: hold ->invalidate_lock in blkdev_fallocate
blktrace: Fix uaf in blk_trace access after removing by sysfs
block: don't call rq_qos_ops->done_bio if the bio isn't tracked
md: fix a lock order reversal in md_alloc
nvme: keep ctrl->namespaces ordered
nvme-tcp: fix incorrect h2cdata pdu offset accounting
nvme-fc: remove freeze/unfreeze around update_nr_hw_queues
nvme-fc: avoid race between time out and tear down
nvme-fc: update hardware queues before using them
Merge tag 'for-linus-5.15b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Some minor cleanups and fixes of some theoretical bugs, as well as a
fix of a bug introduced in 5.15-rc1"
* tag 'for-linus-5.15b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/x86: fix PV trap handling on secondary processors
xen/balloon: fix balloon kthread freezing
swiotlb-xen: this is PV-only on x86
xen/pci-swiotlb: reduce visibility of symbols
PCI: only build xen-pcifront in PV-enabled environments
swiotlb-xen: ensure to issue well-formed XENMEM_exchange requests
Xen/gntdev: don't ignore kernel unmapping error
xen/x86: drop redundant zeroing from cpu_initialize_context()
Merge tag 'erofs-for-5.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Two bugfixes to fix the 4KiB blockmap chunk format availability and a
dangling pointer usage. There is also a trivial cleanup to clarify
compacted_2b if compacted_4b_initial > totalidx.
Summary:
- fix the dangling pointer use in erofs_lookup tracepoint
- fix unsupported chunk format check
- zero out compacted_2b if compacted_4b_initial > totalidx"
* tag 'erofs-for-5.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: clear compacted_2b if compacted_4b_initial > totalidx
erofs: fix misbehavior of unsupported chunk format check
erofs: fix up erofs_lookup tracepoint
Merge tag '5.15-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Six small cifs/smb3 fixes, two for stable:
- important fix for deferred close (found by a git functional test)
related to attribute caching on close.
- four (two cosmetic, two more serious) small fixes for problems
pointed out by smatch via Dan Carpenter
- fix for comment formatting problems pointed out by W=1"
* tag '5.15-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix incorrect check for null pointer in header_assemble
smb3: correct server pointer dereferencing check to be more consistent
smb3: correct smb3 ACL security descriptor
cifs: Clear modified attribute bit from inode flags
cifs: Deal with some warnings from W=1
cifs: fix a sign extension bug
Merge tag 'staging-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 5.15-rc3:
- greybus tty use-after-free bugfix
- r8188eu ioctl overlap build warning fix
Note, the r8188eu ioctl has been entirely removed for 5.16-rc1, but
it's good to get this fixed now for people using this in 5.15.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: fix -Wrestrict warnings
staging: greybus: uart: fix tty use after free
Merge tag 'usb-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some USB driver fixes and new device ids for 5.15-rc3.
They include:
- usb-storage quirk additions
- usb-serial new device ids
- usb-serial driver fixes
- USB roothub registration bugfix to resolve a long-reported issue
- usb gadget driver fixes for a large number of small things
- dwc2 driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
USB: serial: option: add device id for Foxconn T99W265
USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter
USB: serial: cp210x: add part-number debug printk
USB: serial: cp210x: fix dropped characters with CP2102
MAINTAINERS: usb, update Peter Korsgaard's entries
usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()
usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c
Re-enable UAS for LaCie Rugged USB3-FW with fk quirk
USB: serial: option: remove duplicate USB device ID
USB: serial: mos7840: remove duplicated 0xac24 device ID
arm64: dts: qcom: ipq8074: remove USB tx-fifo-resize property
usb: gadget: f_uac2: Populate SS descriptors' wBytesPerInterval
usb: gadget: f_uac2: Add missing companion descriptor for feedback EP
usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA
usb: core: hcd: Modularize HCD stop configuration in usb_stop_hcd()
xhci: Set HCD flag to defer primary roothub registration
usb: core: hcd: Add support for deferring roothub registration
usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave
usb: dwc3: core: balance phy init and exit
Revert "USB: bcma: Add a check for devm_gpiod_get"
...
Hyunchul Lee [Fri, 24 Sep 2021 15:06:16 +0000 (00:06 +0900)]
ksmbd: use LOOKUP_BENEATH to prevent the out of share access
instead of removing '..' in a given path, call
kern_path with LOOKUP_BENEATH flag to prevent
the out of share access.
ran various test on this:
smb2-cat-async smb://127.0.0.1/homes/../out_of_share
smb2-cat-async smb://127.0.0.1/homes/foo/../../out_of_share
smbclient //127.0.0.1/homes -c "mkdir ../foo2"
smbclient //127.0.0.1/homes -c "rename bar ../bar"
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Ralph Boehme <slow@samba.org> Tested-by: Steve French <smfrench@gmail.com> Tested-by: Namjae Jeon <linkinjeon@kernel.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, the asan-stack parameter is only passed along if
CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
be defined in Kconfig so that the value can be checked. In RISC-V's
case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
is disabled, resulting in large stack warnings with allmodconfig:
drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12: error: stack frame size (14400) exceeds limit (2048) in function 'lb035q02_connect' [-Werror,-Wframe-larger-than]
static int lb035q02_connect(struct omap_dss_device *dssdev)
^
1 error generated.
Ensure that the value of CONFIG_KASAN_STACK is always passed along to
the compiler so that these warnings do not happen when
CONFIG_KASAN_STACK is disabled.
Link: https://github.com/ClangBuiltLinux/linux/issues/1453
References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier") Link: https://lkml.kernel.org/r/20210922205525.570068-1-nathan@kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Marco Elver <elver@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sh: pgtable-3level: fix cast to pointer from integer of different size
If X2TLB=y (CPU_SHX2=y or CPU_SHX3=y, e.g. migor_defconfig), pgd_t.pgd
is "unsigned long long", causing:
In file included from arch/sh/include/asm/pgtable.h:13,
from include/linux/pgtable.h:6,
from include/linux/mm.h:33,
from arch/sh/kernel/asm-offsets.c:14:
arch/sh/include/asm/pgtable-3level.h: In function `pud_pgtable':
arch/sh/include/asm/pgtable-3level.h:37:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
37 | return (pmd_t *)pud_val(pud);
| ^
Fix this by adding an intermediate cast to "unsigned long", which is
basically what the old code did before.
Link: https://lkml.kernel.org/r/2c2eef3c9a2f57e5609100a4864715ccf253d30f.1631713483.git.geert+renesas@glider.be Fixes: 9cf6fa2458443118 ("mm: rename pud_page_vaddr to pud_pgtable and make it return pmd_t *") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Daniel Palmer <daniel@thingy.jp> Acked-by: Rob Landley <rob@landley.net> Cc: Yoshinori Sato <ysato@users.osdn.me> Cc: Rich Felker <dalias@libc.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Fri, 24 Sep 2021 22:43:47 +0000 (15:43 -0700)]
mm: fs: invalidate bh_lrus for only cold path
The kernel test robot reported the regression of fio.write_iops[1] with
commit 8cc621d2f45d ("mm: fs: invalidate BH LRU during page migration").
Since lru_add_drain is called frequently, invalidate bh_lrus there could
increase bh_lrus cache miss ratio, which needs more IO in the end.
This patch moves the bh_lrus invalidation from the hot path( e.g.,
zap_page_range, pagevec_release) to cold path(i.e., lru_add_drain_all,
lru_cache_disable).
Zhengjun Xing confirmed
"I test the patch, the regression reduced to -2.9%"
Changbin Du [Fri, 24 Sep 2021 22:43:41 +0000 (15:43 -0700)]
tools/vm/page-types: remove dependency on opt_file for idle page tracking
Idle page tracking can also be used for process address space, not only
file mappings.
Without this change, using with '-i' option for process address space
encounters below errors reported.
$ sudo ./page-types -p $(pidof bash) -i
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
...
Fix the following build failure reported in [1] by adding a conditional
definition of EM_RISCV in order to allow cross-compilation on machines
which do not have EM_RISCV definition in their host.
scripts/sorttable.c:352:7: error: use of undeclared identifier 'EM_RISCV'
EM_RISCV was added to <elf.h> in glibc 2.24 so builds on systems with
glibc headers < 2.24 should show this error.
[mkubecek@suse.cz: changelog addition] Link: https://lore.kernel.org/lkml/e8965b25-f15b-c7b4-748c-d207dda9c8e8@i2se.com/ Link: https://lkml.kernel.org/r/20210913030625.4525-1-miles.chen@mediatek.com Fixes: 54fed35fd393 ("riscv: Enable BUILDTIME_TABLE_SORT") Signed-off-by: Miles Chen <miles.chen@mediatek.com> Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Cc: Michal Kubecek <mkubecek@suse.cz> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wengang Wang [Fri, 24 Sep 2021 22:43:35 +0000 (15:43 -0700)]
ocfs2: drop acl cache for directories too
ocfs2_data_convert_worker() is currently dropping any cached acl info
for FILE before down-converting meta lock. It should also drop for
DIRECTORY. Otherwise the second acl lookup returns the cached one (from
VFS layer) which could be already stale.
The problem we are seeing is that the acl changes on one node doesn't
get refreshed on other nodes in the following case:
setfacl -m u:user1:rwX dir1
getfacl dir1 <-- see the change for user1
getfacl dir1 <-- can't see change for user1
Link: https://lkml.kernel.org/r/20210903012631.6099-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Liu Yuntao [Fri, 24 Sep 2021 22:43:32 +0000 (15:43 -0700)]
mm/shmem.c: fix judgment error in shmem_is_huge()
In the case of SHMEM_HUGE_WITHIN_SIZE, the page index is not rounded up
correctly. When the page index points to the first page in a huge page,
round_up() cannot bring it to the end of the huge page, but to the end
of the previous one.
An example:
HPAGE_PMD_NR on my machine is 512(2 MB huge page size). After
allcoating a 3000 KB buffer, I access it at location 2050 KB. In
shmem_is_huge(), the corresponding index happens to be 512. After
rounded up by HPAGE_PMD_NR, it will still be 512 which is smaller than
i_size, and shmem_is_huge() will return true. As a result, my buffer
takes an additional huge page, and that shouldn't happen when
shmem_enabled is set to within_size.
Link: https://lkml.kernel.org/r/20210909032007.18353-1-liuyuntao10@huawei.com Fixes: f3f0e1d2150b2b ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Liu Yuntao <liuyuntao10@huawei.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: wuxu.wu <wuxu.wu@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
xtensa frame size is larger than the frame size for almost all other
architectures. This results in more than 50 "the frame size of <n> is
larger than 1024 bytes" errors when trying to build xtensa:allmodconfig.
Increase frame size for xtensa to 1536 bytes to avoid compile errors due
to frame size limits.
Link: https://lkml.kernel.org/r/20210912025235.3514761-1-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Marco Elver [Fri, 24 Sep 2021 22:43:23 +0000 (15:43 -0700)]
kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS
In the main KASAN config option CC_HAS_WORKING_NOSANITIZE_ADDRESS is
checked for instrumentation-based modes. However, if
HAVE_ARCH_KASAN_HW_TAGS is true all modes may still be selected.
To fix, also make the software modes depend on
CC_HAS_WORKING_NOSANITIZE_ADDRESS.
mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()
Commit fcc00621d88b ("mm/hwpoison: retry with shake_page() for
unhandlable pages") changed the return value of __get_hwpoison_page() to
retry for transiently unhandlable cases. However, __get_hwpoison_page()
currently fails to properly judge buddy pages as handlable, so hard/soft
offline for buddy pages always fail as "unhandlable page". This is
totally regrettable.
So let's add is_free_buddy_page() in HWPoisonHandlable(), so that
__get_hwpoison_page() returns different return values between buddy
pages and unhandlable pages as intended.
Link: https://lkml.kernel.org/r/20210909004131.163221-1-naoya.horiguchi@linux.dev Fixes: fcc00621d88b ("mm/hwpoison: retry with shake_page() for unhandlable pages") Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Begunkov [Fri, 24 Sep 2021 19:04:29 +0000 (20:04 +0100)]
io_uring: make OP_CLOSE consistent with direct open
From recently open/accept are now able to manipulate fixed file table,
but it's inconsistent that close can't. Close the gap, keep API same as
with open/accept, i.e. via sqe->file_slot.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge tag 'gpio-fixes-for-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a regression in GPIO ACPI on HP ElitePad 1000 G2 where the
gpio_set_debounce_timeout() now returns a fatal error if the specific
debounce period is not supported by the driver instead of just
emitting a warning
- fix return values of irq_mask/unmask() callbacks in gpio-uniphier
- fix hwirq calculation in gpio-aspeed-sgpio
- fix two issues in gpio-rockchip: only make the extended debounce
support available for v2 and remove a redundant BIT() usage
* tag 'gpio-fixes-for-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio/rockchip: fix get_direction value handling
gpio/rockchip: extended debounce support is only available on v2
gpio: gpio-aspeed-sgpio: Fix wrong hwirq in irq handler.
gpio: uniphier: Fix void functions to remove return value
gpiolib: acpi: Make set-debounce-timeout failures non fatal
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- It turns out that the optimised string routines merged in 5.14 are
not safe with in-kernel MTE (KASAN_HW_TAGS) because of reading beyond
the end of a string (strcmp, strncmp). Such reading may go across a
16 byte tag granule and cause a tag check fault. When KASAN_HW_TAGS
is enabled, use the generic strcmp/strncmp C implementation.
- An errata workaround for ThunderX relied on the CPU capabilities
being enabled in a specific order. This disappeared with the
automatic generation of the cpucaps.h file (sorted alphabetically).
Fix it by checking the current CPU only rather than the system-wide
capability.
- Add system_supports_mte() checks on the kernel entry/exit path and
thread switching to avoid unnecessary barriers and function calls on
systems where MTE is not supported.
- kselftests: skip arm64 tests if the required features are missing.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Restore forced disabling of KPTI on ThunderX
kselftest/arm64: signal: Skip tests if required features are missing
arm64: Mitigate MTE issues with str{n}cmp()
arm64: add MTE supported check to thread switching and syscall entry/exit
Merge tag 'fixes_for_v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull misc filesystem fixes from Jan Kara:
"A for ext2 sleep in atomic context in case of some fs problems and a
cleanup of an invalidate_lock initialization"
* tag 'fixes_for_v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: fix sleeping in atomic bugs on error
mm: Fully initialize invalidate_lock, amend lock class later
Ming Lei [Thu, 23 Sep 2021 02:37:51 +0000 (10:37 +0800)]
block: hold ->invalidate_lock in blkdev_fallocate
When running ->fallocate(), blkdev_fallocate() should hold
mapping->invalidate_lock to prevent page cache from being accessed,
otherwise stale data may be read in page cache.
Without this patch, blktests block/009 fails sometimes. With this patch,
block/009 can pass always.
Also as Jan pointed out, no pages can be created in the discarded area
while you are holding the invalidate_lock, so remove the 2nd
truncate_bdev_range().
ioctl$SG_IO(/dev/sda, SG_IO, ...)
// Enters trace_note_tsk() after blk_trace_free() returned
// Use mdelay in rcu region rather than msleep(which may schedule out)
Remove blk_trace from running_list before calling blk_trace_free() by
sysfs if blk_trace is at Blktrace_running state.
Ming Lei [Fri, 24 Sep 2021 11:07:04 +0000 (19:07 +0800)]
block: don't call rq_qos_ops->done_bio if the bio isn't tracked
rq_qos framework is only applied on request based driver, so:
1) rq_qos_done_bio() needn't to be called for bio based driver
2) rq_qos_done_bio() needn't to be called for bio which isn't tracked,
such as bios ended from error handling code.
Especially in bio_endio():
1) request queue is referred via bio->bi_bdev->bd_disk->queue, which
may be gone since request queue refcount may not be held in above two
cases
2) q->rq_qos may be freed in blk_cleanup_queue() when calling into
__rq_qos_done_bio()
Fix the potential kernel panic by not calling rq_qos_ops->done_bio if
the bio isn't tracked. This way is safe because both ioc_rqos_done_bio()
and blkcg_iolatency_done_bio() are nop if the bio isn't tracked.
Reported-by: Yu Kuai <yukuai3@huawei.com> Cc: tj@kernel.org Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20210924110704.1541818-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Fri, 24 Sep 2021 16:14:48 +0000 (17:14 +0100)]
io_uring: kill extra checks in io_write()
We don't retry short writes and so we would never get to async setup in
io_write() in that case. Thus ret2 > 0 is always false and
iov_iter_advance() is never used. Apparently, the same is found by
Coverity, which complains on the code.
io_uring: put provided buffer meta data under memcg accounting
For each provided buffer, we allocate a struct io_buffer to hold the
data associated with it. As a large number of buffers can be provided,
account that data with memcg.
io_uring: allow conditional reschedule for intensive iterators
If we have a lot of threads and rings, the tctx list can get quite big.
This is especially true if we keep creating new threads and rings.
Likewise for the provided buffers list. Be nice and insert a conditional
reschedule point while iterating the nodes for deletion.
projects / users / hch / block.git / log