Merge tag 'block-6.15-20250411' of git://git.kernel.dk/linux
Pull more block fixes from Jens Axboe:
"Apparently my internal clock was off, or perhaps it was just wishful
thinking, but I sent out block fixes yesterday as my brain assumed it
was Friday. Subsequently, that missed the NVMe fixes that should go
into this weeks release as well. Hence, here's a followup with those,
and another simple fix.
- NVMe pull request via Christoph:
- nvmet fc/fcloop refcounting fixes (Daniel Wagner)
- fix missed namespace/ANA scans (Hannes Reinecke)
- fix a use after free in the new TCP netns support (Kuniyuki
Iwashima)
- fix a NULL instead of false review in multipath (Uday Shankar)
- Use strscpy() for null_blk disk name copy"
* tag 'block-6.15-20250411' of git://git.kernel.dk/linux:
null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev()
nvmet-fc: put ref when assoc->del_work is already scheduled
nvmet-fc: take tgtport reference only once
nvmet-fc: update tgtport ref per assoc
nvmet-fc: inline nvmet_fc_free_hostport
nvmet-fc: inline nvmet_fc_delete_assoc
nvmet-fcloop: add ref counting to lport
nvmet-fcloop: replace kref with refcount
nvmet-fcloop: swap list_add_tail arguments
nvme-tcp: fix use-after-free of netns by kernel TCP socket.
nvme: multipath: fix return value of nvme_available_path
nvme: re-read ANA log page after ns scan completes
nvme: requeue namespace scan on missed AENs
Merge tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix two crashes, one in core code and a NULL-ptr dereference in the
Mediatek IOMMU driver
- Dma_ops cleanup fix for core code
- Two fixes for Intel VT-d driver:
- Fix posted MSI issue when users change cpu affinity
- Remove invalid set_dma_ops() call in the iommu driver
- Warning fix for Tegra IOMMU driver
- Suspend/Resume fix for Exynos IOMMU driver
- Probe failure fix for Renesas IOMMU driver
- Cosmetic fix
* tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
iommu: remove unneeded semicolon
iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group
iommu/exynos: Fix suspend/resume with IDENTITY domain
iommu/ipmmu-vmsa: Register in a sensible order
iommu: Clear iommu-dma ops on cleanup
iommu/vt-d: Remove an unnecessary call set_dma_ops()
iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs
iommu: Fix crash in report_iommu_fault()
Merge tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI button driver, add quirks
related to EC wakeups from suspend-to-idle and fix coding mistakes
related to the usage of sizeof() in the PPTT parser code:
Summary:
- Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario
Limonciello)
- Prevent ACPI button from sending spurions KEY_POWER events to user
space in some cases after a recent update (Mario Limonciello)
- Compute the size of a structure instead of the size of a pointer in
two places in the PPTT parser code (Jean-Marc Eurin)"
* tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls
ACPI: EC: Set ec_no_wakeup for Lenovo Go S
ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
Merge tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
"Note that besides two bug fixes this includes three commits for IBM
z17, which was announced this week.
- Add IBM z17 bits:
- Setup elf_platform for new machine types
- Allow to compile the kernel with z17 optimizations
- Add new performance counters
- Fix mismatch between indicator bits and queue indexes in virtio CCW code
- Fix double free in pmu setup error path"
* tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Fix double free on error in cpumf_pmu_event_init()
s390/cpumf: Update CPU Measurement facility extended counter set support
s390: Allow to compile with z17 optimizations
s390: Add z17 elf platform
s390/virtio_ccw: Don't allocate/assign airqs for non-existing queues
null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev()
blk_mq_alloc_disk() already zero-initializes the destination buffer,
making strscpy() sufficient for safely copying the disk's name. The
additional NUL-padding performed by strscpy_pad() is unnecessary.
If the destination buffer has a fixed length, strscpy() automatically
determines its size using sizeof() when the argument is omitted. This
makes the explicit size argument unnecessary.
The source string is also NUL-terminated and meets the __must_be_cstr()
requirement of strscpy().
iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
Two WARNINGs are observed when SMMU driver rolls back upon failure:
arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8
Call trace:
dmam_free_coherent+0xc0/0xd8 (P)
tegra241_vintf_free_lvcmdq+0x74/0x188
tegra241_cmdqv_remove_vintf+0x60/0x148
tegra241_cmdqv_remove+0x48/0xc8
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
------------[ cut here ]------------
128 pages are still in use!
WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8
Call trace:
free_contig_range+0x18c/0x1c8 (P)
cma_release+0x154/0x2f0
dma_free_contiguous+0x38/0xa0
dma_direct_free+0x10c/0x248
dma_free_attrs+0x100/0x290
dmam_free_coherent+0x78/0xd8
tegra241_vintf_free_lvcmdq+0x74/0x160
tegra241_cmdqv_remove+0x98/0x198
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
This is because the LVCMDQ queue memory are managed by devres, while that
dmam_free_coherent() is called in the context of devm_action_release().
Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres
callbacks if ops->device_remove() is going to be manually freeing things
that probe allocated":
https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/
In fact, tegra241_cmdqv_init_structures() only allocates memory resources
which means any failure that it generates would be similar to -ENOMEM, so
there is no point in having that "falling back to standard SMMU" routine,
as the standard SMMU would likely fail to allocate memory too.
Remove the unwind part in tegra241_cmdqv_init_structures(), and return a
proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via
impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since
devres will take care of that.
Fixes: 483e0bd8883a ("iommu/tegra241-cmdqv: Do not allocate vcmdq until dma_set_mask_and_coherent") Cc: stable@vger.kernel.org Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20250407201908.172225-1-nicolinc@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group
Currently, mtk_iommu calls during probe iommu_device_register before
the hw_list from driver data is initialized. Since iommu probing issue
fix, it leads to NULL pointer dereference in mtk_iommu_device_group when
hw_list is accessed with list_first_entry (not null safe).
So, change the call order to ensure iommu_device_register is called
after the driver data are initialized.
Fixes: 9e3a2a643653 ("iommu/mediatek: Adapt sharing and non-sharing pgtable case") Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Reviewed-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183 Juniper, MT8186 Tentacruel Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Link: https://lore.kernel.org/r/20250403-fix-mtk-iommu-error-v2-1-fe8b18f8b0a8@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Marek Szyprowski [Tue, 1 Apr 2025 20:27:31 +0000 (22:27 +0200)]
iommu/exynos: Fix suspend/resume with IDENTITY domain
Commit bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe
path") changed the sequence of probing the SYSMMU controller devices and
calls to arm_iommu_attach_device(), what results in resuming SYSMMU
controller earlier, when it is still set to IDENTITY mapping. Such change
revealed the bug in IDENTITY handling in the exynos-iommu driver. When
SYSMMU controller is set to IDENTITY mapping, data->domain is NULL, so
adjust checks in suspend & resume callbacks to handle this case
correctly.
Robin Murphy [Thu, 20 Mar 2025 14:41:27 +0000 (14:41 +0000)]
iommu/ipmmu-vmsa: Register in a sensible order
IPMMU registers almost-initialised instances, but misses assigning the
drvdata to make them fully functional, so initial calls back into
ipmmu_probe_device() are likely to fail unnecessarily. Reorder this to
work as it should, also pruning the long-out-of-date comment and adding
the missing sysfs cleanup on error for good measure.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/53be6667544de65a15415b699e38a9a965692e45.1742481687.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Robin Murphy [Thu, 10 Apr 2025 11:23:48 +0000 (12:23 +0100)]
iommu: Clear iommu-dma ops on cleanup
If iommu_device_register() encounters an error, it can end up tearing
down already-configured groups and default domains, however this
currently still leaves devices hooked up to iommu-dma (and even
historically the behaviour in this area was at best inconsistent across
architectures/drivers...) Although in the case that an IOMMU is present
whose driver has failed to probe, users cannot necessarily expect DMA to
work anyway, it's still arguable that we should do our best to put
things back as if the IOMMU driver was never there at all, and certainly
the potential for crashing in iommu-dma itself is undesirable. Make sure
we clean up the dev->dma_iommu flag along with everything else.
Sean Christopherson [Thu, 10 Apr 2025 07:32:46 +0000 (15:32 +0800)]
iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs
Set the posted MSI irq_chip's irq_ack() hook to irq_move_irq() instead of
a dummy/empty callback so that posted MSIs process pending changes to the
IRQ's SMP affinity. Failure to honor a pending set-affinity results in
userspace being unable to change the effective affinity of the IRQ, as
IRQD_SETAFFINITY_PENDING is never cleared and so irq_set_affinity_locked()
always defers moving the IRQ.
The issue is most easily reproducible by setting /proc/irq/xx/smp_affinity
multiple times in quick succession, as only the first update is likely to
be handled in process context.
Fixes: ed1e48ea4370 ("iommu/vt-d: Enable posted mode for device MSIs") Cc: Robert Lippert <rlippert@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Wentao Yang <wentaoyang@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20250321194249.1217961-1-seanjc@google.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
report_iommu_fault() checks for an installed handler comparing the
corresponding field to NULL. It can (and could before) be called for a
domain with a different cookie type - IOMMU_COOKIE_DMA_IOVA, specifically.
Cookie is represented as a union so we may end up with a garbage value
treated there if this happens for a domain with another cookie type.
Formerly there were two exclusive cookie types in the union.
IOMMU_DOMAIN_SVA has a dedicated iommu_report_device_fault().
Call the fault handler only if the passed domain has a required cookie
type.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 6aa63a4ec947 ("iommu: Sort out domain user data") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20250408213342.285955-1-pchelkin@ispras.ru Signed-off-by: Joerg Roedel <jroedel@suse.de>
Merge tag 'drm-fixes-2025-04-11-1' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, as expected it has a bit more in it than probably usual
for rc2. amdgpu/xe/i915 lead the way with fixes all over for a bunch
of other drivers. Nothing major stands out from what I can see.
tests:
- Clean up struct drm_display_mode in various places
i915:
- Fix scanline offset for LNL+ and BMG+
- Fix GVT unterminated-string-initialization build warning
- Fix DP rate limit when sink doesn't support TPS4
- Handle GDDR + ECC memory type detection
- Fix VRR parameter change check
- Fix fence not released on early probe errors
- Disable render power gating during live selftests
xe:
- Add another BMG PCI ID
- Fix UAFs on migration paths
- Fix shift-out-of-bounds access on TLB invalidation
- Ensure ccs_mode is correctly set on gt reset
- Extend some HW workarounds to Xe3
- Fix PM runtime get/put on sysfs files
- Fix u64 division on 32b
- Fix flickering due to missing L3 invalidations
- Fix missing error code return
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
amdkfd:
- Queue reset fixes
imagination:
- Fix overflow
- Fix use-after-free
ivpu:
- Fix suspend/resume
nouveau:
- Do not deref dangling pointer
rockchip:
- Set DP/HDMI registers correctly
udmabuf:
- Fix overflow
virtgpu:
- Set reservation lock on dma-buf import
- Fix error handling in prepare_fb"
* tag 'drm-fixes-2025-04-11-1' of https://gitlab.freedesktop.org/drm/kernel: (58 commits)
drm/rockchip: dw_hdmi_qp: Fix io init for dw_hdmi_qp_rockchip_resume
drm/rockchip: vop2: Fix interface enable/mux setting of DP1 on rk3588
drm/amdgpu/mes12: optimize MES pipe FW version fetching
drm/amd/pm/smu11: Prevent division by zero
drm/amdgpu: cancel gfx idle work in device suspend for s0ix
drm/amd/display: pause the workload setting in dm
drm/amdgpu/pm/swsmu: implement pause workload profile
drm/amdgpu/pm: add workload profile pause helper
drm/i915/huc: Fix fence not released on early probe errors
drm/i915/vrr: Add vrr.vsync_{start, end} in vrr_params_changed
drm/tests: probe-helper: Fix drm_display_mode memory leak
drm/tests: modes: Fix drm_display_mode memory leak
drm/tests: modes: Fix drm_display_mode memory leak
drm/tests: cmdline: Fix drm_display_mode memory leak
drm/tests: modeset: Fix drm_display_mode memory leak
drm/tests: modeset: Fix drm_display_mode memory leak
drm/tests: helpers: Create kunit helper to destroy a drm_display_mode
drm/xe: Restore EIO errno return when GuC PC start fails
drm/xe: Invalidate L3 read-only cachelines for geometry streams too
drm/xe: avoid plain 64-bit division
...
Merge tag 'bcachefs-2025-04-10' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Mostly minor fixes.
Eric Biggers' crypto API conversion is included because of long
standing sporadic crashes - mostly, but not entirely syzbot - in the
crypto API code when calling poly1305, which have been nigh impossible
to reproduce and debug.
His rework deletes the code where we've seen the crashes, so either
it'll be a fix or we'll end up with backtraces we can debug. (Thanks
Eric!)"
* tag 'bcachefs-2025-04-10' of git://evilpiepirate.org/bcachefs:
bcachefs: Use sort_nonatomic() instead of sort()
bcachefs: Remove unnecessary softdep on xxhash
bcachefs: use library APIs for ChaCha20 and Poly1305
bcachefs: Fix duplicate "ro,read_only" in opts at startup
bcachefs: Fix UAF in bchfs_read()
bcachefs: Use cpu_to_le16 for dirent lengths
bcachefs: Fix type for parameter in journal_advance_devs_to_next_bucket
bcachefs: Fix escape sequence in prt_printf
Dave Airlie [Thu, 10 Apr 2025 23:11:04 +0000 (09:11 +1000)]
Merge tag 'drm-xe-fixes-2025-04-10' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Add another BMG PCI ID
- Fix UAFs on migration paths
- Fix shift-out-of-bounds access on TLB invalidation
- Ensure ccs_mode is correctly set on gt reset
- Extend some HW workarounds to Xe3
- Fix PM runtime get/put on sysfs files
- Fix u64 division on 32b
- Fix flickering due to missing L3 invalidations
- Fix missing error code return
Merge tag 'irq-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc irqchip fixes from Ingo Molnar:
- Fix NULL pointer dereference crashes due to missing .chip_flags setup
in the sg2042-msi and irq-bcm2712-mip irqchip drivers
- Remove the davinci aintc irqchip driver's leftover header too
* tag 'irq-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-bcm2712-mip: Set EOI/ACK flags in msi_parent_ops
irqchip/sg2042-msi: Add missing chip flags
irqchip/davinci: Remove leftover header
Merge tag 'timers-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc timer fixes from Ingo Molnar:
- Fix missing ACCESS_PRIVATE() that triggered a Sparse warning
- Fix lockdep false positive in tick_freeze() on CONFIG_PREEMPT_RT=y
- Avoid <vdso/unaligned.h> macro's variable shadowing to address build
warning that triggers under W=2 builds
* tag 'timers-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso: Address variable shadowing in macros
timekeeping: Add a lockdep override in tick_freeze()
hrtimer: Add missing ACCESS_PRIVATE() for hrtimer::function
Merge tag 'x86-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix CPU topology related regression that limited Xen PV guests to a
single CPU
- Fix ancient e820__register_nosave_regions() bugs that were causing
problems with kexec's artificial memory maps
- Fix an S4 hibernation crash caused by two missing ENDBR's that were
mistakenly removed in a recent commit
- Fix a resctrl serialization bug
- Fix early_printk documentation and comments
- Fix RSB bugs, combined with preparatory updates to better match the
code to vendor recommendations.
- Add RSB mitigation document
- Fix/update documentation
- Fix the erratum_1386_microcode[] table to be NULL terminated
* tag 'x86-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ibt: Fix hibernate
x86/cpu: Avoid running off the end of an AMD erratum table
Documentation/x86: Zap the subsection letters
Documentation/x86: Update the naming of CPU features for /proc/cpuinfo
x86/bugs: Add RSB mitigation document
x86/bugs: Don't fill RSB on context switch with eIBRS
x86/bugs: Don't fill RSB on VMEXIT with eIBRS+retpoline
x86/bugs: Fix RSB clearing in indirect_branch_prediction_barrier()
x86/bugs: Use SBPB in write_ibpb() if applicable
x86/bugs: Rename entry_ibpb() to write_ibpb()
x86/early_printk: Use 'mmio32' for consistency, fix comments
x86/resctrl: Fix rdtgroup_mkdir()'s unlocked use of kernfs_node::name
x86/e820: Fix handling of subpage regions when calculating nosave ranges in e820__register_nosave_regions()
x86/acpi: Don't limit CPUs to 1 for Xen PV guests due to disabled ACPI
Merge tag 'perf-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf events fixes from Ingo Molnar:
- Fix __free_event() corner case splat
- Fix false-positive uprobes related lockdep splat on
CONFIG_PREEMPT_RT=y kernels
- Fix a complicated perf sigtrap race that may result in hangs
* tag 'perf-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix hang while freeing sigtrap event
uprobes: Avoid false-positive lockdep splat on CONFIG_PREEMPT_RT=y in the ri_timer() uprobe timer callback, use raw_write_seqcount_*()
perf/core: Fix WARN_ON(!ctx) in __free_event() for partial init
* tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ethtool: cmis_cdb: Fix incorrect read / write length extension
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
net: ppp: Add bound checking for skb data on ppp_sync_txmung
net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
ipv6: Align behavior across nexthops during path selection
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()
selftests/tc-testing: sfq: check that a derived limit of 1 is rejected
net_sched: sch_sfq: move the limit validation
net_sched: sch_sfq: use a temporary work area for validating configuration
net: libwx: handle page_pool_dev_alloc_pages error
selftests: mptcp: validate MPJoin HMacFailure counters
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
rtnetlink: Fix bad unlock balance in do_setlink().
net: ethtool: Don't call .cleanup_data when prepare_data fails
tc: Ensure we have enough buffer space when sending filter netlink notifications
net: libwx: Fix the wrong Rx descriptor field
octeontx2-pf: qos: fix VF root node parent queue index
selftests: tls: check that disconnect does nothing
...
Merge tag 'nvme-6.15-2025-04-10' of git://git.infradead.org/nvme into block-6.15
Pull NVMe updates from Christoph:
"nvme updates for Linux 6.15
- nvmet fc/fcloop refcounting fixes (Daniel Wagner)
- fix missed namespace/ANA scans (Hannes Reinecke)
- fix a use after free in the new TCP netns support (Kuniyuki Iwashima)
- fix a NULL instead of false review in multipath (Uday Shankar)"
* tag 'nvme-6.15-2025-04-10' of git://git.infradead.org/nvme:
nvmet-fc: put ref when assoc->del_work is already scheduled
nvmet-fc: take tgtport reference only once
nvmet-fc: update tgtport ref per assoc
nvmet-fc: inline nvmet_fc_free_hostport
nvmet-fc: inline nvmet_fc_delete_assoc
nvmet-fcloop: add ref counting to lport
nvmet-fcloop: replace kref with refcount
nvmet-fcloop: swap list_add_tail arguments
nvme-tcp: fix use-after-free of netns by kernel TCP socket.
nvme: multipath: fix return value of nvme_available_path
nvme: re-read ANA log page after ns scan completes
nvme: requeue namespace scan on missed AENs
Merge tag 'for-linus-6.15a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A simple fix adding the module description of the Xenbus frontend
module
- A fix correcting the xen-acpi-processor Kconfig dependency for PVH
Dom0 support
- A fix for the Xen balloon driver when running as Xen Dom0 in PVH mode
- A fix for PVH Dom0 in order to avoid problems with CPU idle and
frequency drivers conflicting with Xen
* tag 'for-linus-6.15a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: disable CPU idle and frequency drivers for PVH dom0
x86/xen: fix balloon target initialization for PVH dom0
xen: Change xen-acpi-processor dom0 dependency
xenbus: add module description
Merge tag 'block-6.15-20250410' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Add a missing ublk selftest script, from test additions added last
week
- Two fixes for ublk error recovery and reissue
- Cleanup of ublk argument passing
* tag 'block-6.15-20250410' of git://git.kernel.dk/linux:
ublk: pass ublksrv_ctrl_cmd * instead of io_uring_cmd *
ublk: don't fail request for recovery & reissue in case of ubq->canceling
ublk: fix handling recovery & reissue in ublk_abort_queue()
selftests: ublk: fix test_stripe_04
Merge tag 'io_uring-6.15-20250410' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Reject zero sized legacy provided buffers upfront. No ill side
effects from this one, only really done to shut up a silly syzbot
test case.
- Fix for a regression in tag posting for registered files or buffers,
where the tag would be posted even when the registration failed.
- two minor zcrx cleanups for code added this merge window.
* tag 'io_uring-6.15-20250410' of git://git.kernel.dk/linux:
io_uring/kbuf: reject zero sized provided buffers
io_uring/zcrx: separate niov number from pages
io_uring/zcrx: put refill data into separate cache line
io_uring: don't post tag CQEs on file/buffer registration failure
Merge tag 'gpio-fixes-for-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix resource handling in gpio-tegra186
- fix wakeup source leaks in gpio-mpc8xxx and gpio-zynq
- fix minor issues with some GPIO OF quirks
- deprecate GPIOD_FLAGS_BIT_NONEXCLUSIVE and devm_gpiod_unhinge()
symbols and add a TODO task to track replacing them with a better
solution
* tag 'gpio-fixes-for-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: of: Move Atmel HSMCI quirk up out of the regulator comment
gpiolib: of: Fix the choice for Ingenic NAND quirk
gpio: zynq: Fix wakeup source leaks on device unbind
gpio: mpc8xxx: Fix wakeup source leaks on device unbind
gpio: TODO: track the removal of regulator-related workarounds
MAINTAINERS: add more keywords for the GPIO subsystem entry
gpio: deprecate devm_gpiod_unhinge()
gpio: deprecate the GPIOD_FLAGS_BIT_NONEXCLUSIVE flag
gpio: tegra186: fix resource handling in ACPI probe path
Merge tag 'mtd/fixes-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Two important fixes: the build of the SPI NAND layer with old GCC
versions as well as the fix of the Qpic Makefile which was wrong in
the first place.
There are also two smaller fixes about a missing error and status
check"
* tag 'mtd/fixes-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: Fix build with gcc < 7.5
mtd: rawnand: Add status chack in r852_ready()
mtd: inftlcore: Add error check for inftl_read_oob()
mtd: nand: Drop explicit test for built-in CONFIG_SPI_QPIC_SNAND
The 'read_write_len_ext' field in 'struct ethtool_cmis_cdb_cmd_args'
stores the maximum number of bytes that can be read from or written to
the Local Payload (LPL) page in a single multi-byte access.
Cited commit started overwriting this field with the maximum number of
bytes that can be read from or written to the Extended Payload (LPL)
pages in a single multi-byte access. Transceiver modules that support
auto paging can advertise a number larger than 255 which is problematic
as 'read_write_len_ext' is a 'u8', resulting in the number getting
truncated and firmware flashing failing [1].
Fix by ignoring the maximum EPL access size as the kernel does not
currently support auto paging (even if the transceiver module does) and
will not try to read / write more than 128 bytes at once.
[1]
Transceiver module firmware flashing started for device enp177s0np0
Transceiver module firmware flashing in progress for device enp177s0np0
Progress: 0%
Transceiver module firmware flashing encountered an error for device enp177s0np0
Status message: Write FW block EPL command failed, LPL length is longer
than CDB read write length extension allows.
Fixes: 9a3b0d078bd8 ("net: ethtool: Add support for writing firmware blocks using EPL payload") Reported-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Closes: https://lore.kernel.org/netdev/20250402183123.321036-3-michael.chan@broadcom.com/ Tested-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20250409112440.365672-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 10 Apr 2025 11:13:35 +0000 (13:13 +0200)]
Merge tag 'nf-25-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains a Netfilter fix and improved test coverage:
1) Fix AVX2 matching in nft_pipapo, from Florian Westphal.
2) Extend existing test to improve coverage for the aforementioned bug,
also from Florian.
netfilter pull request 25-04-10
* tag 'nf-25-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
====================
selftests: netfilter: add test case for recent mismatch bug
Without 'nft_set_pipapo: fix incorrect avx2 match of 5th field octet"
this fails:
TEST: reported issues
Add two elements, flush, re-add 1s [ OK ]
net,mac with reload 0s [ OK ]
net,port,proto 3s [ OK ]
avx2 false match 0s [FAIL]
False match for fe80:dead:01fe:0a02:0b03:6007:8009:a001
Other tests do not detect the kernel bug as they only alter parts in
the /64 netmask.
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
Given a set element like:
icmpv6 . dead:beef:00ff::1
The value of 'ff' is irrelevant, any address will be matched
as long as the other octets are the same.
This is because of too-early register clobbering:
ymm7 is reloaded with new packet data (pkt[9]) but it still holds data
of an earlier load that wasn't processed yet.
The existing tests in nft_concat_range.sh selftests do exercise this code
path, but do not trigger incorrect matching due to the network prefix
limitation.
net: ppp: Add bound checking for skb data on ppp_sync_txmung
Ensure we have enough data in linear buffer from skb before accessing
initial bytes. This prevents potential out-of-bounds accesses
when processing short packets.
When ppp_sync_txmung receives an incoming package with an empty
payload:
(remote) gef➤ p *(struct pppoe_hdr *) (skb->head + skb->network_header)
$18 = {
type = 0x1,
ver = 0x1,
code = 0x0,
sid = 0x2,
length = 0x0,
tag = 0xffff8880371cdb96
}
from the skb struct (trimmed)
tail = 0x16,
end = 0x140,
head = 0xffff88803346f400 "4",
data = 0xffff88803346f416 ":\377",
truesize = 0x380,
len = 0x0,
data_len = 0x0,
mac_len = 0xe,
hdr_len = 0x0,
Peng Jiang [Mon, 24 Mar 2025 11:12:30 +0000 (19:12 +0800)]
vdso: Address variable shadowing in macros
Compiling the kernel with gcc12.3 W=2 results in shadowing warnings:
warning: declaration of '__pptr' shadows a previous local [-Wshadow]
const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr);
note: in definition of macro '__put_unaligned_t'
__pptr->x = (val);
note: in expansion of macro '__get_unaligned_t'
__put_unaligned_t(type, __get_unaligned_t(type, src), dst);
__get_unaligned_t() and __put_unaligned_t() use a local variable named
'__pptr', which can lead to variable shadowing when these macros are used in
the same scope. This results in a -Wshadow warning during compilation.
To address this issue, rename the local variables within the macros to
ensure uniqueness.
Dave Airlie [Thu, 10 Apr 2025 07:04:33 +0000 (17:04 +1000)]
Merge tag 'amd-drm-fixes-6.15-2025-04-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.15-2025-04-09:
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
Dave Airlie [Thu, 10 Apr 2025 04:23:58 +0000 (14:23 +1000)]
Merge tag 'drm-intel-fixes-2025-04-09' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
drm/i915 fixes for v6.15-rc2:
- Fix scanline offset for LNL+ and BMG+
- Fix GVT unterminated-string-initialization build warning
- Fix DP rate limit when sink doesn't support TPS4
- Handle GDDR + ECC memory type detection
- Fix VRR parameter change check
- Fix fence not released on early probe errors
- Disable render power gating during live selftests
net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
When I ran the repro [0] and waited a few seconds, I observed two
LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1]
Reproduction Steps:
1) Mount CIFS
2) Add an iptables rule to drop incoming FIN packets for CIFS
3) Unmount CIFS
4) Unload the CIFS module
5) Remove the iptables rule
At step 3), the CIFS module calls sock_release() for the underlying
TCP socket, and it returns quickly. However, the socket remains in
FIN_WAIT_1 because incoming FIN packets are dropped.
At this point, the module's refcnt is 0 while the socket is still
alive, so the following rmmod command succeeds.
# ss -tan
State Recv-Q Send-Q Local Address:Port Peer Address:Port
FIN-WAIT-1 0 477 10.0.2.15:51062 10.0.0.137:445
This highlights a discrepancy between the lifetime of the CIFS module
and the underlying TCP socket. Even after CIFS calls sock_release()
and it returns, the TCP socket does not die immediately in order to
close the connection gracefully.
While this is generally fine, it causes an issue with LOCKDEP because
CIFS assigns a different lock class to the TCP socket's sk->sk_lock
using sock_lock_init_class_and_name().
Once an incoming packet is processed for the socket or a timer fires,
sk->sk_lock is acquired.
Then, LOCKDEP checks the lock context in check_wait_context(), where
hlock_class() is called to retrieve the lock class. However, since
the module has already been unloaded, hlock_class() logs a warning
and returns NULL, triggering the null-ptr-deref.
If LOCKDEP is enabled, we must ensure that a module calling
sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded
while such a socket is still alive to prevent this issue.
Let's hold the module reference in sock_lock_init_class_and_name()
and release it when the socket is freed in sk_prot_free().
Note that sock_lock_init() clears sk->sk_owner for svc_create_socket()
that calls sock_lock_init_class_and_name() for a listening socket,
which clones a socket by sk_clone_lock() without GFP_ZERO.
ipv6: Align behavior across nexthops during path selection
A nexthop is only chosen when the calculated multipath hash falls in the
nexthop's hash region (i.e., the hash is smaller than the nexthop's hash
threshold) and when the nexthop is assigned a non-negative score by
rt6_score_route().
Commit 4d0ab3a6885e ("ipv6: Start path selection from the first
nexthop") introduced an unintentional difference between the first
nexthop and the rest when the score is negative.
When the first nexthop matches, but has a negative score, the code will
currently evaluate subsequent nexthops until one is found with a
non-negative score. On the other hand, when a different nexthop matches,
but has a negative score, the code will fallback to the nexthop with
which the selection started ('match').
Align the behavior across all nexthops and fallback to 'match' when the
first nexthop matches, but has a negative score.
Fixes: 3d709f69a3e7 ("ipv6: Use hash-threshold instead of modulo-N") Fixes: 4d0ab3a6885e ("ipv6: Start path selection from the first nexthop") Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Closes: https://lore.kernel.org/netdev/67efef607bc41_1ddca82948c@willemb.c.googlers.com.notmuch/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250408084316.243559-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Apr 2025 09:40:42 +0000 (12:40 +0300)]
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
DSA has 2 kinds of drivers:
1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.
For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.
Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:
It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.
The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.
mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d16 ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.
This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:
Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.
Thus, for the situation where the PM is not managed by the MAC, we will
make the MDIO bus PM ops treat identically the phylink-controlled PHYs
with the phylib-controlled PHYs where an adjust_link() callback is
supplied. In both cases, the MDIO bus PM ops should stop and restart the
PHY state machine.
Vladimir Oltean [Mon, 7 Apr 2025 09:38:59 +0000 (12:38 +0300)]
net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()
In an upcoming change, mdio_bus_phy_may_suspend() will need to
distinguish a phylib-based PHY client from a phylink PHY client.
For that, it will need to compare the phydev->phy_link_change() function
pointer with the eponymous phy_link_change() provided by phylib.
To avoid forward function declarations, the default PHY link state
change method should be moved upwards. There is no functional change
associated with this patch, it is only to reduce the noise from a real
bug fix.
Merge tag 'linux_kselftest-fixes-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- Fixes tpm2, futex, and mincore tests
- Create a dedicated .gitignore for tpm2 tests
* tag 'linux_kselftest-fixes-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/mincore: Allow read-ahead pages to reach the end of the file
selftests/futex: futex_waitv wouldblock test should fail
selftests: tpm2: test_smoke: use POSIX-conformant expression operator
selftests: tpm2: create a dedicated .gitignore
Sebastian Andrzej Siewior [Fri, 4 Apr 2025 13:34:29 +0000 (15:34 +0200)]
timekeeping: Add a lockdep override in tick_freeze()
tick_freeze() acquires a raw spinlock (tick_freeze_lock). Later in the
callchain (timekeeping_suspend() -> mc146818_avoid_UIP()) the RTC driver
acquires a spinlock which becomes a sleeping lock on PREEMPT_RT. Lockdep
complains about this lock nesting.
Add a lockdep override for this special case and a comment explaining
why it is okay.
Reported-by: Borislav Petkov <bp@alien8.de> Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/all/20250404133429.pnAzf-eF@linutronix.de Closes: https://lore.kernel.org/all/20250330113202.GAZ-krsjAnurOlTcp-@fat_crate.local/ Closes: https://lore.kernel.org/all/CAP-bSRZ0CWyZZsMtx046YV8L28LhY0fson2g4EqcwRAVN1Jk+Q@mail.gmail.com/
Nam Cao [Tue, 8 Apr 2025 10:38:54 +0000 (12:38 +0200)]
hrtimer: Add missing ACCESS_PRIVATE() for hrtimer::function
The "function" field of struct hrtimer has been changed to private, but
two instances have not been converted to use ACCESS_PRIVATE().
Convert them to use ACCESS_PRIVATE().
Fixes: 04257da0c99c ("hrtimers: Make callback function pointer private") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250408103854.1851093-1-namcao@linutronix.de Closes: https://lore.kernel.org/oe-kbuild-all/202504071931.vOVl13tt-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202504072155.5UAZjYGU-lkp@intel.com/
Dave Hansen [Wed, 9 Apr 2025 13:58:37 +0000 (06:58 -0700)]
x86/cpu: Avoid running off the end of an AMD erratum table
The NULL array terminator at the end of erratum_1386_microcode was
removed during the switch from x86_cpu_desc to x86_cpu_id. This
causes readers to run off the end of the array.
Replace the NULL.
Fixes: f3f325152673 ("x86/cpu: Move AMD erratum 1386 table over to 'x86_cpu_id'") Reported-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Alex Deucher [Sun, 6 Apr 2025 21:27:24 +0000 (17:27 -0400)]
drm/amdgpu: cancel gfx idle work in device suspend for s0ix
This is normally handled in the gfx IP suspend callbacks, but
for S0ix, those are skipped because we don't want to touch
gfx. So handle it in device suspend.
Fixes: b9467983b774 ("drm/amdgpu: add dynamic workload profile switching for gfx10") Fixes: 963537ca2325 ("drm/amdgpu: add dynamic workload profile switching for gfx11") Fixes: 5f95a1549555 ("drm/amdgpu: add dynamic workload profile switching for gfx12") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 906ad451675155380c1dc1881a244ebde8e8df0a) Cc: stable@vger.kernel.org
ublk: pass ublksrv_ctrl_cmd * instead of io_uring_cmd *
The ublk_ctrl_*() handlers all take struct io_uring_cmd *cmd but only
use it to get struct ublksrv_ctrl_cmd *header from the io_uring SQE.
Since the caller ublk_ctrl_uring_cmd() has already computed header, pass
it instead of cmd.
Ming Lei [Wed, 9 Apr 2025 01:14:42 +0000 (09:14 +0800)]
ublk: don't fail request for recovery & reissue in case of ubq->canceling
ubq->canceling is set with request queue quiesced when io_uring context is
exiting. USER_RECOVERY or !RECOVERY_FAIL_IO requires request to be re-queued
and re-dispatch after device is recovered.
However commit d796cea7b9f3 ("ublk: implement ->queue_rqs()") still may fail
any request in case of ubq->canceling, this way breaks USER_RECOVERY or
!RECOVERY_FAIL_IO.
Fix it by calling __ublk_abort_rq() in case of ubq->canceling.
Ming Lei [Wed, 9 Apr 2025 01:14:41 +0000 (09:14 +0800)]
ublk: fix handling recovery & reissue in ublk_abort_queue()
Commit 8284066946e6 ("ublk: grab request reference when the request is handled
by userspace") doesn't grab request reference in case of recovery reissue.
Then the request can be requeued & re-dispatch & failed when canceling
uring command.
If it is one zc request, the request can be freed before io_uring
returns the zc buffer back, then cause kernel panic:
Fixes it by always grabbing request reference for aborting the request.
Reported-by: Caleb Sander Mateos <csander@purestorage.com> Closes: https://lore.kernel.org/linux-block/CADUfDZodKfOGUeWrnAxcZiLT+puaZX8jDHoj_sfHZCOZwhzz6A@mail.gmail.com/ Fixes: 8284066946e6 ("ublk: grab request reference when the request is handled by userspace") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250409011444.2142010-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
As a limit of 1 is invalid, this patch series moves the limit
validation to after all configuration changes have been done. To do
so, the configuration is done in a temporary work area then applied to
the internal state.
The patch series also adds new test cases.
v3:
- remove a couple of unnecessary comments
- rearrange local variables to use reverse Christmas tree style
declaration order
v2: https://lore.kernel.org/all/20250402162750.1671155-1-tavip@google.com/
- remove tmp struct and directly use local variables
selftests/tc-testing: sfq: check that a derived limit of 1 is rejected
Because the limit is updated indirectly when other parameters are
updated, there are cases where even though the user requests a limit
of 2 it can actually be set to 1.
Add the following test cases to check that the kernel rejects them:
- limit 2 depth 1 flows 1
- limit 2 depth 1 divisor 1
Signed-off-by: Octavian Purdila <tavip@google.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It is not sufficient to directly validate the limit on the data that
the user passes as it can be updated based on how the other parameters
are changed.
Move the check at the end of the configuration update process to also
catch scenarios where the limit is indirectly updated, for example
with the following configurations:
net_sched: sch_sfq: use a temporary work area for validating configuration
Many configuration parameters have influence on others (e.g. divisor
-> flows -> limit, depth -> limit) and so it is difficult to correctly
do all of the validation before applying the configuration. And if a
validation error is detected late it is difficult to roll back a
partially applied configuration.
To avoid these issues use a temporary work area to update and validate
the configuration and only then apply the configuration to the
internal state.
Signed-off-by: Octavian Purdila <tavip@google.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Wagner [Tue, 8 Apr 2025 15:29:09 +0000 (17:29 +0200)]
nvmet-fc: take tgtport reference only once
The reference counting code can be simplified. Instead taking a tgtport
refrerence at the beginning of nvmet_fc_alloc_hostport and put it back
if not a new hostport object is allocated, only take it when a new
hostport object is allocated.
Signed-off-by: Daniel Wagner <wagi@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Daniel Wagner [Tue, 8 Apr 2025 15:29:05 +0000 (17:29 +0200)]
nvmet-fcloop: add ref counting to lport
The fcloop_lport objects live time is controlled by the user interface
add_local_port and del_local_port. nport, rport and tport objects are
pointing to the lport objects but here is no clear tracking. Let's
introduce an explicit ref counter for the lport objects and prepare the
stage for restructuring how lports are used.
Signed-off-by: Daniel Wagner <wagi@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Daniel Wagner [Tue, 8 Apr 2025 15:29:03 +0000 (17:29 +0200)]
nvmet-fcloop: swap list_add_tail arguments
The newly element to be added to the list is the first argument of
list_add_tail. This fix is missing dcfad4ab4d67 ("nvmet-fcloop: swap
the list_add_tail arguments").
Fixes: 437c0b824dbd ("nvme-fcloop: add target to host LS request support") Signed-off-by: Daniel Wagner <wagi@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Create a document to summarize hard-earned knowledge about RSB-related
mitigations, with references, and replace the overly verbose yet
incomplete comments with a reference to the document.
x86/bugs: Don't fill RSB on context switch with eIBRS
User->user Spectre v2 attacks (including RSB) across context switches
are already mitigated by IBPB in cond_mitigation(), if enabled globally
or if either the prev or the next task has opted in to protection. RSB
filling without IBPB serves no purpose for protecting user space, as
indirect branches are still vulnerable.
User->kernel RSB attacks are mitigated by eIBRS. In which case the RSB
filling on context switch isn't needed, so remove it.
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Reviewed-by: Amit Shah <amit.shah@amd.com> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Link: https://lore.kernel.org/r/98cdefe42180358efebf78e3b80752850c7a3e1b.1744148254.git.jpoimboe@kernel.org
x86/bugs: Don't fill RSB on VMEXIT with eIBRS+retpoline
eIBRS protects against guest->host RSB underflow/poisoning attacks.
Adding retpoline to the mix doesn't change that. Retpoline has a
balanced CALL/RET anyway.
So the current full RSB filling on VMEXIT with eIBRS+retpoline is
overkill. Disable it or do the VMEXIT_LITE mitigation if needed.
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Reviewed-by: Amit Shah <amit.shah@amd.com> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: David Woodhouse <dwmw2@infradead.org> Link: https://lore.kernel.org/r/84a1226e5c9e2698eae1b5ade861f1b8bf3677dc.1744148254.git.jpoimboe@kernel.org
x86/bugs: Fix RSB clearing in indirect_branch_prediction_barrier()
IBPB is expected to clear the RSB. However, if X86_BUG_IBPB_NO_RET is
set, that doesn't happen. Make indirect_branch_prediction_barrier()
take that into account by calling write_ibpb() which clears RSB on
X86_BUG_IBPB_NO_RET:
write_ibpb() does IBPB, which (among other things) flushes branch type
predictions on AMD. If the CPU has SRSO_NO, or if the SRSO mitigation
has been disabled, branch type flushing isn't needed, in which case the
lighter-weight SBPB can be used.
The 'x86_pred_cmd' variable already keeps track of whether IBPB or SBPB
should be used. Use that instead of hardcoding IBPB.
Andy Shevchenko [Mon, 7 Apr 2025 17:22:14 +0000 (20:22 +0300)]
x86/early_printk: Use 'mmio32' for consistency, fix comments
First of all, using 'mmio' prevents proper implementation of 8-bit accessors.
Second, it's simply inconsistent with uart8250 set of options. Rename it to
'mmio32'. While at it, remove rather misleading comment in the documentation.
From now on mmio32 is self-explanatory and pciserial supports not only 32-bit
MMIO accessors.
Also, while at it, fix the comment for the "pciserial" case. The comment
seems to be a copy'n'paste error when mentioning "serial" instead of
"pciserial" (with double quotes). Fix this.
With that, move it upper, so we don't calculate 'buf' twice.
Thomas Richter [Wed, 9 Apr 2025 08:03:53 +0000 (10:03 +0200)]
s390/cpumf: Fix double free on error in cpumf_pmu_event_init()
In PMU event initialization functions
- cpumsf_pmu_event_init()
- cpumf_pmu_event_init()
- cfdiag_event_init()
the partially created event had to be removed when an error was detected.
The event::event_init() member function had to release all resources
it allocated in case of error. event::destroy() had to be called
on freeing an event after it was successfully created and
event::event_init() returned success.
With
commit c70ca298036c ("perf/core: Simplify the perf_event_alloc() error path")
this is not necessary anymore. The performance subsystem common
code now always calls event::destroy() to clean up the allocated
resources created during event initialization.
Remove the event::destroy() invocation in PMU event initialization
or that function is called twice for each event that runs into an
error condition in event creation.
This is the kernel log entry which shows up without the fix:
Vasily Gorbik [Mon, 26 Aug 2024 20:13:47 +0000 (22:13 +0200)]
s390: Allow to compile with z17 optimizations
Add config and compile options which allow to compile with z17
optimizations if the compiler supports it. Add the
miscellaneous-instruction-extension 4 facility to the list of facilities
for z17.
David Hildenbrand [Wed, 2 Apr 2025 20:36:21 +0000 (22:36 +0200)]
s390/virtio_ccw: Don't allocate/assign airqs for non-existing queues
If we finds a vq without a name in our input array in
virtio_ccw_find_vqs(), we treat it as "non-existing" and set the vq pointer
to NULL; we will not call virtio_ccw_setup_vq() to allocate/setup a vq.
Consequently, we create only a queue if it actually exists (name != NULL)
and assign an incremental queue index to each such existing queue.
However, in virtio_ccw_register_adapter_ind()->get_airq_indicator() we
will not ignore these "non-existing queues", but instead assign an airq
indicator to them.
Besides never releasing them in virtio_ccw_drop_indicators() (because
there is no virtqueue), the bigger issue seems to be that there will be a
disagreement between the device and the Linux guest about the airq
indicator to be used for notifying a queue, because the indicator bit
for adapter I/O interrupt is derived from the queue index.
The virtio spec states under "Setting Up Two-Stage Queue Indicators":
... indicator contains the guest address of an area wherein the
indicators for the devices are contained, starting at bit_nr, one
bit per virtqueue of the device.
And further in "Notification via Adapter I/O Interrupts":
For notifying the driver of virtqueue buffers, the device sets the
bit in the guest-provided indicator area at the corresponding
offset.
For example, QEMU uses in virtio_ccw_notify() the queue index (passed as
"vector") to select the relevant indicator bit. If a queue does not exist,
it does not have a corresponding indicator bit assigned, because it
effectively doesn't have a queue index.
Using a virtio-balloon-ccw device under QEMU with free-page-hinting
disabled ("free-page-hint=off") but free-page-reporting enabled
("free-page-reporting=on") will result in free page reporting
not working as expected: in the virtio_balloon driver, we'll be stuck
forever in virtballoon_free_page_report()->wait_event(), because the
waitqueue will not be woken up as the notification from the device is
lost: it would use the wrong indicator bit.
Free page reporting stops working and we get splats (when configured to
detect hung wqs) like:
INFO: task kworker/1:3:463 blocked for more than 61 seconds.
Not tainted 6.14.0 #4
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/1:3 [...]
Workqueue: events page_reporting_process
Call Trace:
[<000002f404e6dfb2>] __schedule+0x402/0x1640
[<000002f404e6f22e>] schedule+0x3e/0xe0
[<000002f3846a88fa>] virtballoon_free_page_report+0xaa/0x110 [virtio_balloon]
[<000002f40435c8a4>] page_reporting_process+0x2e4/0x740
[<000002f403fd3ee2>] process_one_work+0x1c2/0x400
[<000002f403fd4b96>] worker_thread+0x296/0x420
[<000002f403fe10b4>] kthread+0x124/0x290
[<000002f403f4e0dc>] __ret_from_fork+0x3c/0x60
[<000002f404e77272>] ret_from_fork+0xa/0x38
There was recently a discussion [1] whether the "holes" should be
treated differently again, effectively assigning also non-existing
queues a queue index: that should also fix the issue, but requires other
workarounds to not break existing setups.
Let's fix it without affecting existing setups for now by properly ignoring
the non-existing queues, so the indicator bits will match the queue
indexes.
James Morse [Mon, 7 Apr 2025 12:46:37 +0000 (13:46 +0100)]
x86/resctrl: Fix rdtgroup_mkdir()'s unlocked use of kernfs_node::name
Since
741c10b096bc ("kernfs: Use RCU to access kernfs_node::name.")
a helper rdt_kn_name() that checks that rdtgroup_mutex is held has been used
for all accesses to the kernfs node name.
rdtgroup_mkdir() uses the name to determine if a valid monitor group is being
created by checking the parent name is "mon_groups". This is done without
holding rdtgroup_mutex, and now triggers the following warning:
Creating a control or monitor group calls mkdir_rdt_prepare(), which uses
rdtgroup_kn_lock_live() to take the rdtgroup_mutex.
To avoid taking and dropping the lock, move the check for the monitor group
name and position into mkdir_rdt_prepare() so that it occurs under
rdtgroup_mutex. Hoist is_mon_groups() earlier in the file.
[ bp: Massage. ]
Fixes: 741c10b096bc ("kernfs: Use RCU to access kernfs_node::name.") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20250407124637.2433230-1-james.morse@arm.com
nvme-tcp: fix use-after-free of netns by kernel TCP socket.
Commit 1be52169c348 ("nvme-tcp: fix selinux denied when calling
sock_sendmsg") converted sock_create() in nvme_tcp_alloc_queue()
to sock_create_kern().
sock_create_kern() creates a kernel socket, which does not hold
a reference to netns. If the code does not manage the netns
lifetime properly, use-after-free could happen.
Also, TCP kernel socket with sk_net_refcnt 0 has a socket leak
problem: it remains FIN_WAIT_1 if it misses FIN after close()
because tcp_close() stops all timers.
To fix such problems, let's hold netns ref by sk_net_refcnt_upgrade().
We had the same issue in CIFS, SMC, etc, and applied the same
solution, see commit ef7134c7fc48 ("smb: client: Fix use-after-free
of network namespace.") and commit 9744d2bf1976 ("smc: Fix
use-after-free in tcp_write_timer_handler().").
Fixes: 1be52169c348 ("nvme-tcp: fix selinux denied when calling sock_sendmsg") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Janusz Krzysztofik [Wed, 2 Apr 2025 17:20:57 +0000 (19:20 +0200)]
drm/i915/huc: Fix fence not released on early probe errors
HuC delayed loading fence, introduced with commit 27536e03271da
("drm/i915/huc: track delayed HuC load with a fence"), is registered with
object tracker early on driver probe but unregistered only from driver
remove, which is not called on early probe errors. Since its memory is
allocated under devres, then released anyway, it may happen to be
allocated again to the fence and reused on future driver probes, resulting
in kernel warnings that taint the kernel:
drm/i915/vrr: Add vrr.vsync_{start, end} in vrr_params_changed
Add the missing vrr parameters in vrr_params_changed() helper.
This ensures that changes in vrr.vsync_{start,end} trigger a call to
appropriate helpers to update the VRR registers.
Fixes: e8cd188e91bb ("drm/i915/display: Compute vrr_vsync params") Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Cc: Arun R Murthy <arun.r.murthy@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.10+ Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://lore.kernel.org/r/20250404080540.2059511-1-ankit.k.nautiyal@intel.com
(cherry picked from commit ced5e64f011cb5cd541988442997ceaa7385827e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Merge tag 'linux_kselftest-kunit-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
- Fix the tool to report test count in case of a late test plan when
tests are specified before the test plan
- Fix spelling error
* tag 'linux_kselftest-kunit-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Spelling s/slowm/slow/
kunit: tool: fix count of tests if late test plan
page_pool_dev_alloc_pages could return NULL. There was a WARN_ON(!page)
but it would still proceed to use the NULL pointer and then crash.
This is similar to commit 001ba0902046
("net: fec: handle page_pool_dev_alloc_pages error").
This is found by our static analysis tool KNighter.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI") Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250407184952.2111299-1-chenyuan0y@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The parent commit fixes an issue around these counters where one of them
-- MPJoinAckHMacFailure -- was wrongly incremented in some cases.
This makes sure the counter is always 0. It should be incremented only
in case of corruption, or a wrong implementation, which should not be
the case in these selftests.
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Recently, during a debugging session using local MPTCP connections, I
noticed MPJoinAckHMacFailure was not zero on the server side. The
counter was in fact incremented when the PM rejected new subflows,
because the 'subflow' limit was reached.
The fix is easy, simply dissociating the two cases: only the HMAC
validation check should increase MPTCP_MIB_JOINACKMAC counter.
Fixes: 4cf8b7e48a09 ("subflow: introduce and use mptcp_can_accept_new_subflow()") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250407-net-mptcp-hmac-failure-mib-v1-1-3c9ecd0a3a50@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Qiuxu Zhuo [Tue, 11 Mar 2025 08:09:40 +0000 (16:09 +0800)]
selftests/mincore: Allow read-ahead pages to reach the end of the file
When running the mincore_selftest on a system with an XFS file system, it
failed the "check_file_mmap" test case due to the read-ahead pages reaching
the end of the file. The failure log is as below:
RUN global.check_file_mmap ...
mincore_selftest.c:264:check_file_mmap:Expected i (1024) < vec_size (1024)
mincore_selftest.c:265:check_file_mmap:Read-ahead pages reached the end of the file
check_file_mmap: Test failed
FAIL global.check_file_mmap
This is because the read-ahead window size of the XFS file system on this
machine is 4 MB, which is larger than the size from the #PF address to the
end of the file. As a result, all the pages for this file are populated.
This issue can be fixed by extending the current FILE_SIZE 4MB to a larger
number, but it will still fail if the read-ahead window size of the file
system is larger enough. Additionally, in the real world, read-ahead pages
reaching the end of the file can happen and is an expected behavior.
Therefore, allowing read-ahead pages to reach the end of the file is a
better choice for the "check_file_mmap" test case.
Ahmed Salem [Tue, 11 Feb 2025 23:16:17 +0000 (01:16 +0200)]
selftests: tpm2: test_smoke: use POSIX-conformant expression operator
Use POSIX-conformant expression operator symbol '='.
The use of the non POSIX-conformant symbol '==' would work
in bash, but not in sh where the unexpected operator error
would result in test_smoke.sh being skipped.
Instead of changing the shebang to use bash, which may not be
available on all systems, use the POSIX-conformant expression
symbol '=' to test for equality.
Without this patch:
===================
# make -j8 TARGETS=tpm2 kselftest
# selftests: tpm2: test_smoke.sh
# ./test_smoke.sh: 9: [: 2: unexpected operator
ok 1 selftests: tpm2: test_smoke.sh # SKIP
With this patch:
================
# make -j8 TARGETS=tpm2 kselftest
# selftests: tpm2: test_smoke.sh
# Ran 9 tests in 9.236s
ok 1 selftests: tpm2: test_smoke.sh
projects / users / hch / misc.git / log