DAX is a coprocessor which resides on the SPARC M7 processor chip, and
has direct access to the CPU's L3 caches as well as physical
memory. It can perform several operations on data streams with
various input and output formats. The driver is merely a transport
mechanism and does not have knowledge of the various opcodes and data
formats. A user space library provides high level services and
translates these into low level commands which are then passed into
the driver and subsequently the hypervisor and the coprocessor.
See Documentation/sparc/dax.txt for more details.
Reviewed-by: Jonathan Helman <jonathan.helman@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: David Aldridge <david.j.aldridge@oracle.com> Reviewed-by: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com> Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Sanath Kumar <sanath.s.kumar@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Dave Aldridge [Fri, 24 Mar 2017 12:01:00 +0000 (06:01 -0600)]
sparc64: fix an issue when trying to bring hotplug cpus online
When booting the kernel with maxcpus= on the command line
and then subsequently trying to bring cpus online using:
echo 1 > /sys/devices/system/cpu/cpu[n]/online
messages of the form:
ldom_startcpu_cpuid: sun4v_cpu_start() gives error 6
Processor[n] is stuck
were being reported on the console.
This commit fixes this issue by ensuring that any cpus not
booted during initial kernel boot are explicitly stopped.
This then allows them to be successfully brought online later
if required.
Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Reviewed-by: Jack Schwartz <jack.schwartz@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
George Kennedy [Wed, 22 Mar 2017 17:39:32 +0000 (13:39 -0400)]
SPARC64: Virtual Disk Device (vdsdev) Read-Only Option (options=ro) not working
Add read-only (options=ro) support to virtual disk server (VDS).
Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com>
Orabug: 23623853 Signed-off-by: Allen Pais <allen.pais@oracle.com>
Babu Moger [Tue, 7 Mar 2017 22:19:55 +0000 (14:19 -0800)]
arch/sparc: Fix FPU register corruption with AES crypto test on M7
We noticed crypto key corruption while running AES crypto tests
with M7 memcpy changes. Investigating further, we found that this
was the same problem reported previously with NG4memcpy. The commit f4da3628dc7c ("sparc64: Fix FPU register corruption with AES crypto
offload") fixes the problem. Ported these changes to M7memcpy.
Signed-off-by: Babu Moger <babu.moger@oracle.com> Tested-by: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Shannon Nelson [Tue, 14 Mar 2017 17:24:43 +0000 (10:24 -0700)]
sunvnet: xoff not needed when removing port link
The sunvnet netdev is connected to the controlling ldom's vswitch
for network bridging. However, for higher performance between ldoms,
there also is a channel between each client ldom. These connections are
represented in the sunvnet driver by a queue for each ldom. The driver
uses select_queue to tell the stack which queue to use by tracking the mac
addresses on the other end of each port. When a connected ldom shuts down,
the driver receives an LDC_EVENT_RESET and the port is removed from the
driver, thus a queue with no ldom on the other end will never be selected
for Tx.
The driver was trying to reinforce the "don't use this queue" notion with
netif_tx_stop_queue() and netif_tx_wake_queue(), which really should only
be used to signal a Tx queue is full (aka XOFF). This misuse of queue
state resulted in NETDEV WATCHDOG messages and lots of unnecessary calls
into the driver's tx_timeout handler. Simply removing these takes care
of the problem.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry-picked from commit 9c5a3a1f9388100d4b03e85faf0cce8264985302)
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry-picked from commit b12a96f5cd04583f45a1b6554b8f3786b26db913)
Shannon Nelson [Tue, 14 Mar 2017 17:24:41 +0000 (10:24 -0700)]
sunvnet: track port queues correctly
Track our used and unused queue indexies correctly. Otherwise, as ports
dropped out and returned, they all eventually ended up with the same
queue index.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry-picked from commit e1f1e5f711265ee9d881afd12ff252b2d01e1174)
Shannon Nelson [Tue, 14 Mar 2017 17:24:40 +0000 (10:24 -0700)]
sunvnet: add stats to track ldom to ldom packets and bytes
In this driver, there is a "port" created for the connection to each of
the other ldoms; a netdev queue is mapped to each port, and they are
collected under a single netdev. The generic netdev statistics show
us all the traffic in and out of our network device, but don't show
individual queue/port stats. This patch breaks out the traffic counts
for the individual ports and gives us a little view into the state of
those connections.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry-picked from commit 0f512c84544b9a8f8de53b6f4bc0c372c45d8693)
Shannon Nelson [Tue, 14 Mar 2017 17:24:39 +0000 (10:24 -0700)]
ldmvsw: better use of link up and down on ldom vswitch
When an ldom VM is bound, the network vswitch infrastructure is set up for
it, but was being forced 'UP' by the userland switch configuration script.
When 'UP' but not actually connected to a running VM, the ipv6 neighbor
probes fail (not a horrible thing) and start cluttering up the kernel logs.
Funny thing: these are debug messages that never actually show up, but
we do see the net_ratelimited messages that say N callbacks were
suppressed.
This patch defers the netif_carrier_on() until an actual link has been
established with the VM, as indicated by receiving an LDC_EVENT_UP from
the underlying LDC protocol. Similarly, we take the link down when we
see the LDC_EVENT_RESET. Now when we see the ndo_open(), we reset the
link to get things talking again.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry-picked from commit 867fa150f8f7ee6e9e5a9ab768e2d0dc675a968b)
Allen Pais [Wed, 29 Mar 2017 08:51:58 +0000 (14:21 +0530)]
megaraid: Fix unaligned warning
The MegaRAID userland descriptor structures do not properly align
pointers on their natural boundaries. This causes warnings to be issued
when storcli or the SNMP daemon are in use.
Quiesce the warning until the user-kernel interface has been fixed.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
(cherry picked from commit 069af368ac74dc0130f91836b9f85f7cd5b18749) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
If the number of processes exceeds the number of supported context IDs
then there are random segfaults seen in the user programs.
The data collected when debugging this bug showed that two processes
with the same context IDs were present in the TLB shared between them
thus resulting in incorrect translations. Since the bug occurs after the
kernel hits the max context ID supported by the processor, the context
wraparound code found in get_new_mmu_context(...) and
smp_new_mmu_context_version_client(...) are under suspicion.
The plan is that this will get fixed when we implement "context domain"
feature for sparc in the kernel. For now this patch temporarily
restricts the number of processes allowed by the kernel based on the
number of context IDs supported by the processor. This way we never reach
that condition of having incorrect translations.
For non root users fork will fail if the number of existing processes is
greater than (max_user_nctx - 100). Where max_user_nctx is the maximum
number of context IDs supported by the processor. For root user the fork
will fail if the the number of existing processes reaches max_user_nctx.
Extra context IDs are given to root to recover the system if users reach
their limit and cannot recover the system (i.e cannot even execute
'kill' to reduce the number of processes).
Signed-off-by: Sanath Kumar <sanath.s.kumar@oracle.com> Reviewed-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
George Kennedy [Wed, 15 Feb 2017 20:17:58 +0000 (15:17 -0500)]
SPARC64: vds_blk_rw() does not handle drives with q->limits.chunk_sectors > 0
Drives with q->limits.chunk_sectors > 0 are not properly handled by
vds_blk_rw(). Drives such as NVME set chunk_sectors to indicate a performance
boundary (see call to blk_queue_chunk_sectors() in nvme_alloc_ns()). Currently,
when vds_blk_rw() calls bio_add_page() and the chunk_sectors boundary would be
crossed, bio_add_page() returns zero and vds_blk_rw() fails with -EIO.
The proposed fix now adds an additional check to vds_blk_rw() when
bio_add_page() returns zero that checks for bio->bi_iter.bi_size != 0. If
bi_size != 0, it indicates that a page or pages have been successfully added by
bio_add_page(). When this added condition has been hit, exit the for loop in
vds_blk_rw() and submit the outstanding IOs and continue.
Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reviewed-By: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Reviewed-By: Liam Merwick <Liam.Merwick@oracle.com>
Orabug: 25373818 Signed-off-by: Allen Pais <allen.pais@oracle.com>
Atish Patra [Mon, 13 Feb 2017 02:32:58 +0000 (19:32 -0700)]
sparc64: Improve boot time by per cpu map update
Currently, smp_fill_in_sib_core_maps is invoked during cpu_up to setup
all the core/sibling map correctly. This happens in the order of O(n^2)
as it iterates over all the online cpus twice when each cpu comes online.
This increases smp_init() execution time exponentially leading to a
higher boot time.
Optimize the code path by comparing only the current cpu with online
cpus and set the maps for both the cpus simultaneously. Take this
opportunity to merge all three for loops into one as well. Here is
the smp_init() time after and before the fix.
Number of cpus: before fix: after the fix:
512 2.30s .283s
1024 14.23s .493s
Signed-off-by: Atish Patra <atish.patra@oracle.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Pavel Tatashin [Wed, 8 Feb 2017 21:02:39 +0000 (16:02 -0500)]
arch/sparc: memblock resizes are not handled properly
In add_node_ranges() when memblock resize happens, the iterator keeps using
the previous freed array. This bug cause hangs on machine where there are
over 128 memory blocks during boot. For example, on machines where memory
interleaving is small.
The problem is seen on T4-4 because it cant have 2T of memory, and memory
is interleaved at 8G. So we have 2T/8G = 256 regions to set node IDs. The
starting size of regions array is 128. Thus, we have to double at least one
time (actually we have to double twice because some memory is already
reserved and thus we need more than 256 regions). We start using an
incorrect pointer to the array after the first doubling.
George Kennedy [Wed, 8 Feb 2017 01:37:37 +0000 (20:37 -0500)]
SPARC64: LDOM vnet "Got unexpected MCAST reply"
Handle unexpected MCAST reply as a debug warning the same as is done in
Solaris 12. Please see bug 24954702 for details.
Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Orabug: 24954702 Signed-off-by: Allen Pais <allen.pais@oracle.com>
Shannon Nelson [Mon, 13 Feb 2017 18:57:04 +0000 (10:57 -0800)]
ldmvsw: disable tso and gso for bridge operations
The ldmvsw driver is specifically for supporting the ldom virtual
networking by running in the primary ldom and using the LDC to connect
the remaining ldoms to the outside world via a bridge. With TSO and GSO
supported while connected the bridge, things tend to misbehave as seen
in our case by delayed packets, enough to begin triggering retransmits
and affecting overall throughput. By turning off advertised support for
TSO and GSO we restore stable traffic flow through the bridge.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit bc221a34ac473b444a7cfdd0c152b4c71f79326b) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 7602011f59cc32ebc3a5f9058d6ba11b096c8c50) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Shannon Nelson [Mon, 13 Feb 2017 18:57:02 +0000 (10:57 -0800)]
sunvnet: remove extra rcu_read_unlocks
The RCU read lock is grabbed first thing in sunvnet_start_xmit_common()
so it always needs to be released. This removes the conditional release
in the dropped packet error path and removes a couple of superfluous
calls in the middle of the code.
Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit daa86e50f649fccadafc53994ddc4254d75a008b) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Shannon Nelson [Mon, 13 Feb 2017 18:57:01 +0000 (10:57 -0800)]
sunvnet: straighten up message event handling logic
The use of gotos for handling the incoming events made this code
harder to read and support than it should be. This patch straightens
out and clears up the logic.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit bf091f3f362b3c562a18bbf7a2d3e2f3a36eba1d) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Shannon Nelson [Mon, 13 Feb 2017 18:57:00 +0000 (10:57 -0800)]
sunvnet: add memory barrier before check for tx enable
In order to allow the underlying LDC and outstanding memory operations
to potentially catch up with the driver's Tx requests, add a memory
barrier before checking again for available tx descriptors.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit fd263fb6e718c5bdf35cbc1de4f781c71794d2a4) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Shannon Nelson [Mon, 13 Feb 2017 18:56:59 +0000 (10:56 -0800)]
sunvnet: update version and version printing
There have been several changes since the first version of this code, so
we bump the version number. While we're at it, we can simplify the
version printing a bit and drop a couple lines of code.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit f2f3e210bffe5c8f8b30d0b0c7b0f733ff5db334) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Sowmini Varadhan [Mon, 13 Feb 2017 18:56:58 +0000 (10:56 -0800)]
sunvnet: remove unused variable in maybe_tx_wakeup
The vio_dring_state *dr variable is unused in maybe_tx_wakeup().
As the comments indicate, we call maybe_tx_wakeup() whenever we
get a STOPPED LDC message on the port. If the queue is stopped,
we want to wake it up so that we will send another START message
at the next TX and trigger the consumer to drain the dring.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit d4aa89cc2bbe021722c946eb11b21ebb0f13c825) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Shannon Nelson [Mon, 13 Feb 2017 18:56:57 +0000 (10:56 -0800)]
sunvnet: make sunvnet common code dynamically loadable
When the sunvnet_common code was split out for use by both sunvnet
and the newer ldmvsw, it was made into a static kernel library, which
limits the usefulness of sunvnet and ldmvsw as loadables, since most
of the real work is being done in the shared code. Also, this is
simply dead code in kernels that aren't running the LDoms.
This patch makes the sunvnet_common into a dynamically loadable
module and makes sunvnet and ldmvsw dependent on sunvnet_common.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 2493b842f258e14938f278e44ecc26970dfabbf0) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 0ff1436fb2e3da085f7177d03ce4362c45b75d57) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 07e25d43be8502bd8ab6122c4f6449ebf30e98f7) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Shannon Nelson [Thu, 12 Jan 2017 18:52:47 +0000 (10:52 -0800)]
hwrng: n2 - add device data descriptions
Since we're going to need to keep track of more than just one
attribute of the hardware, we'll change the use of the data field
from the match struct from a single flag to a struct pointer.
This patch adds the struct template and initial descriptions.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit becbc4940ad8e8ff560e1ceee33d9bb4fe4c9225) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Shannon Nelson [Thu, 12 Jan 2017 18:52:46 +0000 (10:52 -0800)]
hwrng: n2 - limit error spewage when self-test fails
If the self-test fails, it probably won't actually suddenly
start working. Currently, this causes an endless spew of
error messages on the console and in the logs, so this patch
adds a limiter to the test.
Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit db602a7f940a71870c17e39bcbe4e4d7a4a8273e) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit c1e9b3b0eea12899b7749571af21cc60822cf2b6) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Shannon Nelson [Thu, 12 Jan 2017 22:24:58 +0000 (14:24 -0800)]
tcp: fix tcp_fastopen unaligned access complaints on sparc
Fix up a data alignment issue on sparc by swapping the order
of the cookie byte array field with the length field in
struct tcp_fastopen_cookie, and making it a proper union
to clean up the typecasting.
This addresses log complaints like these:
log_unaligned: 113 callbacks suppressed
Kernel unaligned access at TPC[976490] tcp_try_fastopen+0x2d0/0x360
Kernel unaligned access at TPC[9764ac] tcp_try_fastopen+0x2ec/0x360
Kernel unaligned access at TPC[9764c8] tcp_try_fastopen+0x308/0x360
Kernel unaligned access at TPC[9764e4] tcp_try_fastopen+0x324/0x360
Kernel unaligned access at TPC[976490] tcp_try_fastopen+0x2d0/0x360
Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 003c941057eaa868ca6fedd29a274c863167230d) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Liam R. Howlett [Tue, 31 Jan 2017 20:34:08 +0000 (12:34 -0800)]
vds: Add physical block support
Version 1.2 of the virtual IO device protocol added physical block
support. Start sending the underlaying physical block device size.
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Rob Gardner <rob.gardner@oracle.com>
Orabug: 19420123 Signed-off-by: Allen Pais <allen.pais@oracle.com>
Dave Aldridge [Fri, 17 Feb 2017 15:00:38 +0000 (07:00 -0800)]
sparc64: Add missing hardware capabilities for M7
Some M7 hardware capabilities were not being reported
correctly. This commit fixes the issue by adding definitions
for all the missing capabilities from both the Machine
Descriptor and the Compatibility Feature Register.
Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Jag Raman [Tue, 7 Mar 2017 21:41:31 +0000 (16:41 -0500)]
sparc64: VDC threads in guest domain do not resume after primary domain reboot
Prevents VDC threads from hanging while waiting for primary
domain to come back up. Ensures that all waiting VDC threads
are woken up when primary domain comes back up.
Liam R. Howlett [Wed, 1 Feb 2017 19:09:26 +0000 (14:09 -0500)]
sunvdc: Add support for setting physical sector size
Physical sector size is supported in v1.2 of the vDisk protocol and
should be set if available. If protocol version 1.2 is used and the
physical disk size is unavailable, then the disk is considered busy.
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(Cherry-pick of upstream f41e54616ca1a199f6c17228f26082ccdaaab3de)
Orabug: 19420123 Signed-off-by: Allen Pais <allen.pais@oracle.com>
Atish Patra [Wed, 1 Mar 2017 02:18:26 +0000 (19:18 -0700)]
sparc64: create/destroy cpu sysfs dynamically
Currently, cpu/cpuX represents maximum number of possible
cpus in a domain. Those cpu sysfs directories also does
not change as we add/remove cpus via ldom manager.
Update sysfs so that it represents number of present cpus
in the domain. As a result, cpu sysfs is also updated
dynamically upon cpu add/removal.
Before the fix:
[root@ca-sparc76 ~]# ldm list
NAME STATE FLAGS CONS VCPU MEMORY UTIL NORM UPTIME
primary active -n-cv- UART 32 32G 0.2% 0.2% 11m
[root@ca-sparc76 ~]# getconf _NPROCESSORS_CONF
512
[root@ca-sparc76 ~]# ldm set-vcpu 64 primary
[root@ca-sparc76 ~]# ldm list
NAME STATE FLAGS CONS VCPU MEMORY UTIL NORM UPTIME
primary active -n-cv- UART 64 32G 0.0% 0.0% 12m
[root@ca-sparc76 ~]# getconf _NPROCESSORS_CONF
512
-------------------------------------------------------------------------
After the fix:
[root@ca-sparc76 ~]# getconf _NPROCESSORS_CONF
32
[root@ca-sparc76 ~]# ldm set-vcpu 64 primary
[root@ca-sparc76 ~]# ldm list
NAME STATE FLAGS CONS VCPU MEMORY UTIL NORM UPTIME
primary active -n-cv- UART 64 32G 0.0% 0.0% 12m
[root@ca-sparc76 ~]# getconf _NPROCESSORS_CONF
64
Signed-off-by: Atish Patra <atish.patra@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Thomas Tai <thomas.tai@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Khalid Aziz [Tue, 7 Mar 2017 18:26:10 +0000 (11:26 -0700)]
sparc64: Do not retain old VM_SPARC_ADI flag when protection changes on page
When protection on a memory page is changed with mprotect(), old
arch-specific VM flags on the page are retained. This patch clears
old VM_SPARC_ADI flag when protection is changed since mprotect() is
potentially being invoked to disable ADI on the page. This code will
add VM_SPARC_ADI flag back if the new protection includes it.
Aaron Young [Fri, 17 Feb 2017 23:18:53 +0000 (18:18 -0500)]
SPARC64: VIO: Support for virtual-device MD node probing
This update adds support to the mdesc/vio infrastructure to
probe for "virtual-device" nodes in the MD. The vio
module will create sysfs device files for these nodes which
can be accessed by user space code (such as udev). In addition,
VIO drivers can now probe for these MD nodes if the need arises.
This functionality will serve as part of the fix for
BUG 24841906.
Signed-off-by: Aaron Young <Aaron.Young@oracle.com> Reviewed-By: Alexandre Chartre <Alexandre.Chartre@oracle.com>
Orabug: 24841906
Thomas Tai [Mon, 13 Feb 2017 14:50:05 +0000 (06:50 -0800)]
sparc: fix kernel panic caused by vio handshake
During hours long reboot test, the primary prints out multiple TX trigger
errors followed by a VIO handshake panic. The TX trigger error happens
because the primary ldmvsw detects that the ldc channel is down. In this
situation, the ldc operation is aborted, the tx and rx queue are then
flushed. The problem is that the rx queue may contain a LDC_EVENT_RESET
sent by the guest. It causes the primary to think that the ldc channel
is not in reset state. When the guest comes up again, the handshake is
out of sequence and thus causes handshake panic.
The TX trigger error would not have happened if the LDC_EVENT_RESET was
received before the TX checked the ldc link state. This is the reason
why the panic happens intermittently.
This patch checks for the connection reset and changes the ldc state to
reset. The reset logic is taken from existing vnet_event_napi() ldc_ctrl:
code path.
Khalid Aziz [Fri, 2 Dec 2016 19:45:37 +0000 (12:45 -0700)]
sparc64: Add sensible read values for /proc/<pid>/sparc_adi
This patch makes value read from /proc/<pid>/sparc_adi consistent
across platforms that support ADi and ones that do not. When ADI is
not available for a process either due to process being an anonymous
process on an ADI-capable platform or the process is running on a
non-ADI platform, a read from /proc/<pid>/sparc_adi always reads a
value of -1. This patch updates the documentation file as well with
the values for sparc_adi proc file.
Eric Snowberg [Thu, 17 Nov 2016 21:27:36 +0000 (13:27 -0800)]
sparc64: Add ability to set the mcde state for a process
turn off version checking (PSTATE.mcde) to avoid tripping over ADI
versions in flux. This has been partially remedied by using non-faulting
loads.
However, there is still a need to turn off PSTATE.mcde in memory dump
functions. This is to determine if an address is readable. If the
address is unreadable, the dump shows the memory contents as "********"
instead of a 4-byte hex value.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Chuck Anderson [Sat, 18 Feb 2017 06:15:35 +0000 (22:15 -0800)]
sparc64: add mcd_on_by_default
Add the global variable mcd_on_by_default and support for the kernel boot arg
"mcd_on_by_default" which causes mcd_on_by_default = 1 if the kernel is
adi_capable().
Based on the code in commit:
sparc64: Enable Application Data Integrity for m7 and newer processors
Required by commit:
sparc64: Add proc files specific to ADI
Orabug: 22713162 Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Khalid Aziz [Wed, 15 Feb 2017 19:57:59 +0000 (12:57 -0700)]
sparc64: Add support for ADI (Application Data Integrity)
ADI is a new feature supported on SPARC M7 and newer processors to allow
hardware to catch rogue accesses to memory. ADI is supported for data
fetches only and not instruction fetches. An app can enable ADI on its
data pages, set version tags on them and use versioned addresses to
access the data pages. Upper bits of the address contain the version
tag. On M7 processors, upper four bits (bits 63-60) contain the version
tag. If a rogue app attempts to access ADI enabled data pages, its
access is blocked and processor generates an exception. Please see
Documentation/sparc/adi.txt for further details.
This patch extends mprotect to enable ADI (TSTATE.mcde), enable/disable
MCD (Memory Corruption Detection) on selected memory ranges, enable
TTE.mcd in PTEs, return ADI parameters to userspace and save/restore ADI
version tags on page swap out/in or migration. It also adds handlers for
traps related to MCD. ADI is not enabled by default for any task. A task
must explicitly enable ADI on a memory range and set version tag for ADI
to be effective for the task.
This initial implementation supports saving and restoring one tag per
page. A page must use same version tag across the entire page for the
tag to survive swap and migration. Swap swupport infrastructure in this
patch allows for this capability to be expanded to store/restore more
than one tag per page in future.
This is a backport of patch sent upstream and brings UEK code closer to
upstream patch v6.
Khalid Aziz [Wed, 18 Jan 2017 17:59:26 +0000 (10:59 -0700)]
sparc64: Add support for ADI register fields, ASIs and traps
SPARC M7 processor adds new control register fields, ASIs and a new
trap to support the ADI (Application Data Integrity) feature. This
patch adds definitions for these register fields, ASIs and a handler
for the new precise memory corruption detected trap.
This is a backport of patch sent upstream and brings UEK code in sync
with upstream patch v6.
Khalid Aziz [Wed, 18 Jan 2017 17:36:21 +0000 (10:36 -0700)]
mm: Add functions to support extra actions on swap in/out
If a processor supports special metadata for a page, for example ADI
version tags on SPARC M7, this metadata must be saved when the page is
swapped out. The same metadata must be restored when the page is swapped
back in. This patch adds two new architecture specific functions -
arch_do_swap_page() to be called when a page is swapped in,
arch_unmap_one() to be called when a page is being unmapped for swap
out.
This is a backport of patch sent upstream and brings UEK code in sync
with upstream patch v6.
Khalid Aziz [Thu, 5 Jan 2017 18:46:54 +0000 (11:46 -0700)]
signals, sparc: Add signal codes for ADI violations
SPARC M7 processor introduces a new feature - Application Data
Integrity (ADI). ADI allows MMU to catch rogue accesses to memory.
When a rogue access occurs, MMU blocks the access and raises an
exception. In response to the exception, kernel sends the offending
task a SIGSEGV with si_code that indicates the nature of exception.
This patch adds three new signal codes specific to ADI feature:
1. ADI is not enabled for the address and task attempted to access
memory using ADI
2. Task attempted to access memory using wrong ADI tag and caused
a deferred exception.
3. Task attempted to access memory using wrong ADI Ttag and caused
a precise exception.
This is a backport of patch sent upstream and brings UEK code closer to
upstream patch v6.
The command "shutdown -h -H now" should shut the system down to the
OBP, however the machine was being powered off in the LDOM case.
In the LDOM case, the "reboot-command" variable must be set to
the string "noop" and then ldom_reboot() must be called.
This will make the OBP ignore the setting of "auto-boot?" after it
completes the reset. This causes the system to stop at the ok prompt.
Signed-off-by: Larry Bassel <larry.bassel@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
When returning from the user probe code into userspace process, PC & NPC are
truncated to 32 bits.
As a result of shared libraries get loaded very high in the virtual address
space of the process, placing a user probe inside a shared library makes the
kernel return into the process at the wrong address, causing it to seg'fault
most of the time.
This patch prevents truncating PC and NPC.
Signed-off-by: Eric Saint Etienne <eric.saint.etienne@oracle.com> Reviewed-by: David Aldridge <david.j.aldridge@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Atish Patra [Mon, 23 Jan 2017 21:40:35 +0000 (14:40 -0700)]
sparc64: Use online cpus instead of present cpus during hotplug.
As per the hotplug documentation, online cpu maps should be
updated if cpu hotplug happens via sysfs. Thus, all other
cpu maps should be updated basd on the online cpus instead
of present cpus. The following example illustrates the issue
if cpu maps are updated based on present cpus.
[root@ca-sparc64 hackbench]# echo 1 > /sys/devices/system/cpu/cpu2/online
[root@ca-sparc64 hackbench]#
cat /sys/devices/system/cpu/cpu1/topology/core_siblings_list
0-255
[root@ca-sparc64 hackbench]#
cat /sys/devices/system/cpu/cpu1/topology/thread_siblings_list
0-7
This is wrong because cpu0 is still offline.
After the fix:
[root@ca-sparc64 hackbench]#
cat /sys/devices/system/cpu/cpu1/topology/core_siblings_list
1-255
[root@ca-sparc64 hackbench]#
cat /sys/devices/system/cpu/cpu1/topology/thread_siblings_list
1-7
Signed-off-by: Atish Patra <atish.patra@oracle.com> Reviewed-by: Chris Hyser <chris.hyser@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Atish Patra [Mon, 23 Jan 2017 21:39:24 +0000 (14:39 -0700)]
sparc64: Update cpumaps correctly during hotplug.
Currently,numa_cpu_mask is not updated when cpus are
hotplugged resulting incorrect number of cpus reported
by lscpu/numactl. Moreover, cpu_core_sib_cache_map is
also not cleared when cpu goes offline.
Update both the masks correctly whenever cpu goes online/
offline.
Thomas Tai [Tue, 17 Jan 2017 19:43:32 +0000 (11:43 -0800)]
sparc: fix intermittent LDom hang waiting for vdc_port_up
When an LDom boots, sunvdc probes the disk using the LDC channel.
If the channel was previously configured, we need to wait for
the channel state to change from UP to RESETTING so that the
seqid is properly reset in the primary. Otherwise the primary
will expect that the ldc packet contains a seqid other than 0.
Also disable ldc hypervisor interrupt before calling vio_port_up,
because interrupts can happen once ldc_bind is called. disabling the
interrupt ensures everything is configured before getting an interrupt
request.
Signed-off-by: Thomas Tai <thomas.tai@oracle.com> Reviewed-By: Liam Merwick <Liam.Merwick@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Babu Moger [Wed, 18 Jan 2017 01:21:44 +0000 (17:21 -0800)]
arch/sparc: Add a dedicated clear_page and clear_user_page for M7
Adding a dedicated clear_page and clear_user_page for M7.
Avoids multiple checks which are really not required.
This eliminates about 30 instructions for each call.
Seen about 3 to 4 percent latency reduction in some cases.
Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by: Eric Saint Etienne <eric.saint.etienne@oracle.com> Reviewed-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Couple of indexing fixes.
1. Fix indexing pbm->msi_msiqid_table. It is initialized
based off of pbm->msi_first(not pbm->msiq_first as previously done).
Here is how it is initialized(Look at in sparc64_setup_msi_irq)
pbm->msi_msiqid_table[msi - pbm->msi_first] = msiqid;
2. In set_related_affinity, we dont need to subtract msi_first as
the loop is indexed from 0 to size of the table.
Saves time when smp_flush_tlb_page/smp_flush_tlb_pending
is called during do_exit(...). Without this patch, killing
processes had performance bottle neck in these functions
due to unnecessary xcalls made to flush TLBs.
Reviewed-by: Nitin Gupta <nitin.m.gupta@oracle.com> Signed-off-by: Bob Picco <bob.picco@oracle.com Signed-off-by: Henry Willard <henry.willard@oracle.com> Signed-off-by: Sanath Kumar <sanath.s.kumar@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Liam R. Howlett [Thu, 5 Jan 2017 20:58:41 +0000 (15:58 -0500)]
sparc64: Zero pages on allocation for mondo and error queues.
Error queues use a non-zero first word to detect if the queues are full.
Using pages that have not been zeroed may result in false positive
overflow events. These queues are set up once during boot so zeroing
all mondo and error queue pages is safe.
Note that this does not always occur because the page allocation for
these queues is so early in the boot cycle that higher number CPUs get
fresh pages. It is only when traps are serviced with lower number CPUs
who were given already used pages that this issue is exposed.
Liam R. Howlett [Thu, 22 Dec 2016 02:57:42 +0000 (21:57 -0500)]
sparc64: Don't panic on user mode non-resumable errors
Send a SIGBUS to the offending process on all userspace non-resumable
traps. This prevents userspace applications from creating a kernel
panic. The siginfo will return the code BUS_ADRERR and a valid address
if possible.
David S. Miller [Thu, 27 Oct 2016 16:04:54 +0000 (09:04 -0700)]
sparc64: Handle extremely large kernel TLB range flushes more gracefully.
When the vmalloc area gets fragmented, and because the firmware
mapping area sits between where modules live and the vmalloc area, we
can sometimes receive requests for enormous kernel TLB range flushes.
When this happens the cpu just spins flushing billions of pages and
this triggers the NMI watchdog and other problems.
We took care of this on the TSB side by doing a linear scan of the
table once we pass a certain threshold.
Do something similar for the TLB flush, however we are limited by
the TLB flush facilities provided by the different chip variants.
First of all we use an (mostly arbitrary) cut-off of 256K which is
about 32 pages. This can be tuned in the future.
The huge range code path for each chip works as follows:
1) On spitfire we flush all non-locked TLB entries using diagnostic
acceses.
2) On cheetah we use the "flush all" TLB flush.
3) On sun4v/hypervisor we do a TLB context flush on context 0, which
unlike previous chips does not remove "permanent" or locked
entries.
We could probably do something better on spitfire, such as limiting
the flush to kernel TLB entries or even doing range comparisons.
However that probably isn't worth it since those chips are old and
the TLB only had 64 entries.
Reported-by: James Clarke <jrtc27@jrtc27.com> Tested-by: James Clarke <jrtc27@jrtc27.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit a74ad5e660a9ee1d071665e7e8ad822784a2dc7f) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit a236441bb69723032db94128761a469030c3fe6d) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 830cda3f9855ff092b0e9610346d110846fc497c) Signed-off-by: Allen Pais <allen.pais@oracle.com>
David S. Miller [Wed, 26 Oct 2016 02:43:17 +0000 (19:43 -0700)]
sparc64: Handle extremely large kernel TSB range flushes sanely.
If the number of pages we are flushing is more than twice the number
of entries in the TSB, just scan the TSB table for matches rather
than probing each and every page in the range.
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 849c498766060a16aad5b0e0d03206726e7d2fa4) Signed-off-by: Allen Pais <allen.pais@oracle.com>
David S. Miller [Tue, 25 Oct 2016 23:23:26 +0000 (16:23 -0700)]
sparc64: Fix illegal relative branches in hypervisor patched TLB code.
When we copy code over to patch another piece of code, we can only use
PC-relative branches that target code within that piece of code.
Such PC-relative branches cannot be made to external symbols because
the patch moves the location of the code and thus modifies the
relative address of external symbols.
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit b429ae4d5b565a71dfffd759dfcd4f6c093ced94) Signed-off-by: Allen Pais <allen.pais@oracle.com>
2. CPU DR related problems including 'length too big' errors and hangs. With
these new fixes, >256 vcpus can be successfully added/removed from a guest
domain. As part of this fix, a new scheme for reusing event data memory
buffers was implemented.
Signed-off-by: Aaron Young <Aaron.Young@oracle.com> Reviewed-By: Liam Merwick <Liam.Merwick@oracle.com>
Orabug: 23171935, 24848179 Signed-off-by: Allen Pais <allen.pais@oracle.com>
Aaron Young [Wed, 23 Nov 2016 16:02:02 +0000 (11:02 -0500)]
SPARC64: ds driver: Make memory allocations ATOMIC and enhance debugging
This patch fixes the following issues:
1. BUG 25107317 - Kernel Panic: Watchdog HARD LOCKUP out of ds_cap_fini()
2. BUG 24787856 - Forward port 19811909 - Unnecessary
warning - ldom_req_sp_token
BUG 25107317 appears to be caused by the ds driver allocating memory using
the GFP_KERNEL flag (which can result in sleeping) while holding a spinlock.
This is a violation of rules and resulted in the panic.
To fix BUG 24787856, the error message in question was changed to a
printk_once() which will result in the message only appearing once
in the console log instead of repeatedly.
The debugging facility in the driver was also enhanced by adding 3 separate
debug levels for the ds driver debug messages.
Signed-off-by: Aaron Young <Aaron.Young@oracle.com> Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com> Reviewed-By: Liam Merwick <Liam.Merwick@oracle.com>
Orabug: 25107317, 24787856
(cherry picked from commit f3bf272f0512120708a2966a7916b51c34efe56d) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Dave Aldridge [Thu, 19 May 2016 10:54:58 +0000 (03:54 -0700)]
sparc64: Add symbolic access to M7 performance counters to perf
This commit provides symbolic access to every performance counter
provided in the M7. The 'perf list' command can be used to provide
a complete list of these new events, which will be reported as
shown below.
Br_mispred OR cpu/Br_mispred/ [Kernel PMU event]
Br_taken OR cpu/Br_taken/ [Kernel PMU event]
Br_tgt_mispred OR cpu/Br_tgt_mispred/ [Kernel PMU event]
Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Acked-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
(cherry picked from commit 39f70b2fa98ea10931133ab983f521c70cb7429f)
Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com>
(cherry picked from commit f39f00c4536c8c6ca0585a200a56894c2c158743) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Dave Aldridge [Fri, 24 Jun 2016 13:17:25 +0000 (06:17 -0700)]
sparc64: Fix the watchdog corrupting performance counters
There is a race condition in the perf_event_grab_pmc() which
means that we do not increment the active_events count correctly
when a new event is added. Ultimately, we end up with a negative
value for the active_event count. This means that the next time
we try and add a new event the watchdog will not be stopped
correctly and corruption of the performance count will
be observed.
Note: In sparc64 land the watchdog is implemented using one
of the performance counters.
This issue is fixed by moving the mutex lock to make
sure it encompasses the whole critical section in the
perf_event_grab_pmc().
Dave Aldridge [Tue, 29 Mar 2016 10:57:14 +0000 (03:57 -0700)]
sparc64: Fix incorrect counting when using multiple perf counters
Commit 165050c1 introduced a change to the way we deal with
performance counter overflow interrupts. This change had the
side effect that when a performance counter overflow was
detected it assumed all performance counters in use
had overflowed. Thus, when using multiple performance
counters the event counting was incorrect.
This commit fixes this incorrect counting behaviour.
Dave Aldridge [Fri, 4 Nov 2016 16:56:07 +0000 (09:56 -0700)]
sparc64: Fix a race condition when stopping performance counters
When stopping a performance counter that is close to overflowing,
there is a race condition that can occur between writing to the
PCRx register to stop the counter (and also clearing the PCRx.ov
bit at the same time) vs the performance counter overflowing and
setting the PCRx.ov bit in the PCRx register.
The result of this race condition is that we occassionally miss
a performance counter overflow interrupt, which in turn leads
to incorrect event counting.
This race condition has been observed when counting cpu cycles.
To fix this issue when stopping a performance counter,
we simply allow it to continue counting and overflow before
stopping it. This allows the performance counter overflow
interrupt to be generated and acted upon.
This fix is applied for M7, T5 and T4 devices.
Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
(cherry picked from commit e5b7619e1de2f3e0dd858f632bc08ce64c344245) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Dave Aldridge [Fri, 4 Mar 2016 11:18:45 +0000 (03:18 -0800)]
sparc64: Stop performance counter before updating
In order to reliably clear the PCRx.ov bit when updating a
performance counter value, we need to stop it counting first.
If we do not do this, then we can miss performance counter
overflow events.
Signed-off-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
(cherry picked from commit a53c94ca8afc7a7603ff3c1154d81abb113a9e71)
Reviewed-by: Chris Hyser <chris.hyser@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
(cherry picked from commit c33aebff52457ee7d0bacc922dc23b07cee4139a)
Thomas Tai [Fri, 11 Nov 2016 15:46:10 +0000 (10:46 -0500)]
sparc64: fix compile warning section mismatch in find_node()
A compile warning is introduced by a commit to fix the find_node().
This patch fix the compile warning by moving find_node() into __init
section. Because find_node() is only used by memblock_nid_range() which
is only used by a __init add_node_ranges(). find_node() and
memblock_nid_range() should also be inside __init section.
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
(cherry picked from commit e58d08f923190fc4dc2a1962710f84672c2bc9b2) Signed-off-by: Allen Pais <allen.pais@oracle.com>
sun4v_build_irq assume the given irq number is valid and use
it to get the handler pointer, the pointer is dereference
without being checked and cause kernel panic.
The cause of the invalid irq is that the tx/rx irq have never
been free during device removal. irq number end up exhausted during
continuous device add/removal test.
tx/rx irq is allocated during vio_device_probe() using irq_alloc()
and cookie_assign(). To free the tx/rx irq, cookie_unassign() and
irq_free() is called when the device is removed.
Signed-off-by: Thomas Tai <thomas.tai@oracle.com> Reviewed-by: Chris Hyser <chris.hyser@oracle.com>
(cherry picked from commit 80043637b8fb1eabc16ab5947019f4dcdbb8c79f) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Aaron Young [Wed, 2 Nov 2016 17:00:29 +0000 (13:00 -0400)]
SPARC64: ldmvsw: tx queue stuck in stopped state after LDC reset
The following patch fixes an issue with the ldmvsw driver where
the network connection of a guest domain becomes non-functional after
the guest domain has panic'd and rebooted.
The root cause was determined to be from the following series of
events:
1. Guest domain panics - resulting in the guest no longer processing
network packets (from ldmvsw driver)
2. The ldmvsw driver (in the control domain) eventually exerts flow
control due to no more available tx drings and stops the tx queue
for the guest domain
3. The LDC of the network connection for the guest is reset when
the guest domain reboots after the panic.
4. The LDC reset event is received by the ldmvsw driver and the ldmvsw
responds by clearing the tx queue for the guest.
5. ldmvsw waits indefinitely for a DATA ACK from the guest - which is
the normal method to re-enable the tx queue. But the ACK never comes
because the tx queue was cleared due to the LDC reset.
To fix this issue, in addition to clearing the tx queue, re-enable the
tx queue on a LDC reset. This prevents the ldmvsw from getting caught in
this deadlocked state of waiting for a DATA ACK which will never come.
Signed-off-by: Aaron Young <Aaron.Young@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Orabug: 24714685
(cherry picked from commit d84ad41602ceb070c05d2633bc09d81f66796e15) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Babu Moger [Thu, 13 Oct 2016 17:36:48 +0000 (10:36 -0700)]
sparc: Implement watchdog_nmi_enable and watchdog_nmi_disable
Implement functions watchdog_nmi_enable and watchdog_nmi_disable
to enable/disable nmi watchdogs. Sparc uses arch specific nmi watchdog
handler. Currently, we do not have a way to enable/disable nmi watchdog
dynamically. With these patches we can enable or disable arch
specific nmi watchdogs using proc or sysctl interface.
Example commands.
To enable: echo 1 > /proc/sys/kernel/nmi_watchdog
To disable: echo 0 > /proc/sys/kernel/nmi_watchdog
It can also achieved using the sysctl parameter kernel.nmi_watchdog
Signed-off-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit 43e96774e0a338e883e9ced9e717424df126b153) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Atish Patra [Thu, 20 Oct 2016 00:33:29 +0000 (18:33 -0600)]
sparc64: Setup a scheduling domain for highest level cache.
Individual scheduler domain should consist different hierarchy
consisting of cores sharing similar property. Currently, no
scheduler domain is defined separately for the cores that shares
the last level cache. As a result, the scheduler fails to take
advantage of cache locality while migrating tasks during load
balancing.
Here are the cpu masks currently present for sparc that are/can
be used in scheduler domain construction.
cpu_core_map : set based on the cores that shares l1 cache.
core_core_sib_map : is set based on the socket id or max cache id.
The prior SPARC notion of socket was defined as highest level of
shared cache. However, the MD record on T7 platforms now describes
the CPUs that share the physical socket and this is no longer tied
to shared cache.
That's why a separate cpu mask needs to be created that truly
represent highest level of shared cache for all platforms.
Signed-off-by: Atish Patra <atish.patra@oracle.com> Reviewed-by: Chris Hyser <chris.hyser@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 1e655ca52bb2727471f20cf4d8f62b4b9f69e6fc) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Allen Pais [Mon, 30 May 2016 07:42:15 +0000 (13:12 +0530)]
SPARC64: PORT LDMVSW DRIVER TO UEK4
Port of the new ldmvsw (Ldoms Virtual Switch) driver to UEK4.
This code has already been submitted and accepted
into the mainline Linux kernel.
The ldmvsw is very similar in function to the existing sunvnet driver. The
sunvnet driver is therefore split to put the code common to both drivers
into the kernel for use by both drivers when loaded (see sunvnet_common.c/h).
Signed-off-by: Aaron Young <aaron.young@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
(cherry picked from commit 361afffe35368dc23d2c9df6d7797ccf9af8fe57)
Rob Gardner [Sun, 1 Nov 2015 23:51:34 +0000 (16:51 -0700)]
SPARC64: Fix bad FP register calculation
An additional problem was found in handle_ldf_stq
after adding the fix for the SIGFPE on no-fault
load. The calculation for freg is incorrect when
a single precision load is being handled. This
causes %f1 to be seen as %f32 etc, and the incorrect
register ends up being overwritten. This code
sequence demonstrates the problem:
ldd [%g1], %f32 ! g1 = valid address
lda [%i3] ASI_PNF, %f1 ! i3 = invalid address
std %f32, [%g1] ! %f32 is mangled
This is corrected by basing the freg calculation on
the load size.
Rob Gardner [Fri, 30 Oct 2015 19:18:00 +0000 (13:18 -0600)]
SPARC64: Respect no-fault ASI for floating exceptions
Floating point load instructions using ASI_PNF or other
no-fault ASIs should never cause a SIGFPE. A store-quad
instruction should naturally fault if a non-quad register
is given, but this constraint should not apply to loads,
which may be single precision, double, or quad, and the
only constraint should be that the target register type
be appropriate for the precision of the load. A bug in
handle_ldf_stq() unnecessarily restricts no-fault loads
to quad registers, and causes a floating point exception
if one is not given. This restriction is removed.
Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
The sysfs file /sys/devices/system/node/node0/cpulist is incorrect in the
single node case on sun4v machines as the machine description record in this
case does not contain any NUMA information. A default list from 0 to NR_CPUS
was used prior. This file is read by utilities such as 'numactl --hardware'
and lscpu to show CPU-to-node assignment.
In order to fix this issue, the numa_cpumask_lookup_table is cleared at
bootup. Whenever an extra cpu is bringup via __cpu_up, the corresponding
cpu mask is set in the numa_cpumask_lookup_table.
chris hyser [Fri, 23 Sep 2016 16:27:07 +0000 (09:27 -0700)]
sparc64: Cleans up PRIQ error and debugging messages.
Given that the lowest level arch dependent interrupt routines cannot actually
propagate any error back to the calling driver in the case of irq
request/enable/disable and setting affinity, PRIQ error messages need to
communicate failures in a more traceable way. The original error messages which
were more for internal debugging than regular usage have also been improved as
well as made controllable via a command line parameter priq=dbg.
Signed-off-by: Chris Hyser <chris.hyser@oracle.com>
(cherry picked from commit 89c31d4dd664cd2edc1f6d14aa62c75acfb0d172) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Dave Kleikamp [Fri, 17 Jun 2016 14:51:04 +0000 (09:51 -0500)]
sparc: Remove console spam during kdump
Before executing the crash kernel, the panicking kernel cleans up the
irq state of the machine. This code contains a warning when cleaning up
unbound MSIs. Repeating this warning for each one floods the console and
can cause a waiting thread to time out before the other cpus have
completed.
This patch removes the warning and increases the time allowed for all
the cpus to complete the machine_capture_other_strands() function.
projects / users / jedix / linux-maple.git / log