Linus Torvalds [Sat, 28 Jun 2025 02:38:36 +0000 (19:38 -0700)]
Merge tag 'drm-fixes-2025-06-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular weekly drm updates, nothing out of the ordinary, amdgpu, xe,
i915 and a few misc bits. Seems about right for this time in the
release cycle.
core:
- fix drm_writeback_connector_cleanup function signature
- use correct HDMI audio bridge in drm_connector_hdmi_audio_init
bridge:
- SN65DSI86: fix HPD
amdgpu:
- Cleaner shader support for additional GFX9 GPUs
- MES firmware compatibility fixes
- Discovery error reporting fixes
- SDMA6/7 userq fixes
- Backlight fix
- EDID sanity check
i915:
- Fix for SNPS PHY HDMI for 1080p@120Hz
- Correct DP AUX DPCD probe address
- Followup build fix for GCOV and AutoFDO enabled config
xe:
- Missing error check
- Fix xe_hwmon_power_max_write
- Move flushes
- Explicitly exit CT safe mode on unwind
- Process deferred GGTT node removals on device unwind"
* tag 'drm-fixes-2025-06-28' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Process deferred GGTT node removals on device unwind
drm/xe/guc: Explicitly exit CT safe mode on unwind
drm/xe: move DPT l2 flush to a more sensible place
drm/xe: Move DSB l2 flush to a more sensible place
drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type
drm/i915: fix build error some more
drm/xe/hwmon: Fix xe_hwmon_power_max_write
drm/xe/display: Add check for alloc_ordered_workqueue()
drm/amd/display: Add sanity checks for drm_edid_raw()
drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value
drm/amdgpu/sdma7: add ucode version checks for userq support
drm/amdgpu/sdma6: add ucode version checks for userq support
drm/amd: Adjust output for discovery error handling
drm/amdgpu/mes: add compatibility checks for set_hw_resource_1
drm/amdgpu/gfx9: Add Cleaner Shader Support for GFX9.x GPUs
drm/bridge-connector: Fix bridge in drm_connector_hdmi_audio_init()
drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS
drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64
drm: writeback: Fix drm_writeback_connector_cleanup signature
Linus Torvalds [Sat, 28 Jun 2025 00:58:32 +0000 (17:58 -0700)]
Merge tag 'cxl-fixes-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) fixes from Dave Jiang:
"These fixes address a few issues in the CXL subsystem, including
dealing with some bugs in the CXL EDAC and RAS drivers:
- Fix return value of cxlctl_validate_set_features()
- Fix min_scrub_cycle of a region miscaculation and add additional
documentation
- Fix potential memory leak issues for CXL EDAC
- Fix CPER handler device confusion for CXL RAS
- Fix using wrong repair type to check DRAM event record"
* tag 'cxl-fixes-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/edac: Fix using wrong repair type to check dram event record
cxl/ras: Fix CPER handler device confusion
cxl/edac: Fix potential memory leak issues
cxl/Documentation: Add more description about min/max scrub cycle
cxl/edac: Fix the min_scrub_cycle of a region miscalculation
cxl: fix return value in cxlctl_validate_set_features()
Linus Torvalds [Sat, 28 Jun 2025 00:32:30 +0000 (17:32 -0700)]
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Fix a regression where the purgatory code sometimes fails to build"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: sha256: Mark sha256_choose_blocks as __always_inline
Dave Airlie [Fri, 27 Jun 2025 20:53:00 +0000 (06:53 +1000)]
Merge tag 'drm-misc-fixes-2025-06-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc4:
- Fix function signature of drm_writeback_connector_cleanup.
- Use correct HDMI audio bridge in drm_connector_hdmi_audio_init.
- Make HPD work on SN65DSI86.
Linus Torvalds [Fri, 27 Jun 2025 19:08:36 +0000 (12:08 -0700)]
Merge tag 'acpi-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a commit that attempted to fix a memory leak in an error code
path and introduced a different issue (Zhe Qiao)"
* tag 'acpi-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PCI/ACPI: Fix allocated memory release on error in pci_acpi_scan_root()"
Linus Torvalds [Fri, 27 Jun 2025 16:02:33 +0000 (09:02 -0700)]
Merge tag 'block-6.16-20250626' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fixes for ublk:
- fix C++ narrowing warnings in the uapi header
- update/improve UBLK_F_SUPPORT_ZERO_COPY comment in uapi header
- fix for the ublk ->queue_rqs() implementation, limiting a batch
to just the specific task AND ring
- ublk_get_data() error handling fix
- sanity check more arguments in ublk_ctrl_add_dev()
- selftest addition
- NVMe pull request via Christoph:
- reset delayed remove_work after reconnect
- fix atomic write size validation
- Fix for a warning introduced in bdev_count_inflight_rw() in this
merge window
* tag 'block-6.16-20250626' of git://git.kernel.dk/linux:
block: fix false warning in bdev_count_inflight_rw()
ublk: sanity check add_dev input for underflow
nvme: fix atomic write size validation
nvme: refactor the atomic write unit detection
nvme: reset delayed remove_work after reconnect
ublk: setup ublk_io correctly in case of ublk_get_data() failure
ublk: update UBLK_F_SUPPORT_ZERO_COPY comment in UAPI header
ublk: fix narrowing warnings in UAPI header
selftests: ublk: don't take same backing file for more than one ublk devices
ublk: build batch from IOs in same io_ring_ctx and io task
Linus Torvalds [Fri, 27 Jun 2025 15:55:57 +0000 (08:55 -0700)]
Merge tag 'io_uring-6.16-20250626' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Two tweaks for a recent fix: fixing a memory leak if multiple iovecs
were initially mapped but only the first was used and hence turned
into a UBUF rathan than an IOVEC iterator, and catching a case where
a retry would be done even if the previous segment wasn't full
- Small series fixing an issue making the vm unhappy if debugging is
turned on, hitting a VM_BUG_ON_PAGE()
- Fix a resource leak in io_import_dmabuf() in the error handling case,
which is a regression in this merge window
- Mark fallocate as needing to be write serialized, as is already done
for truncate and buffered writes
* tag 'io_uring-6.16-20250626' of git://git.kernel.dk/linux:
io_uring/kbuf: flag partial buffer mappings
io_uring/net: mark iov as dynamically allocated even for single segments
io_uring: fix resource leak in io_import_dmabuf()
io_uring: don't assume uaddr alignment in io_vec_fill_bvec
io_uring/rsrc: don't rely on user vaddr alignment
io_uring/rsrc: fix folio unpinning
io_uring: make fallocate be hashed work
Linus Torvalds [Fri, 27 Jun 2025 15:26:25 +0000 (08:26 -0700)]
Merge tag 's390-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix incorrectly dropped dereferencing of the stack nth entry
introduced with a previous KASAN false positive fix
- Use a proper memdup_array_user() helper to prevent overflow in a
protected key size calculation
* tag 's390-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ptrace: Fix pointer dereferencing in regs_get_kernel_stack_nth()
s390/pkey: Prevent overflow in size calculation for memdup_user()
Linus Torvalds [Fri, 27 Jun 2025 02:49:12 +0000 (19:49 -0700)]
Merge tag 'bcachefs-2025-06-26' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- Lots of small check/repair fixes, primarily in subvol loop and
directory structure loop (when involving snapshots).
- Fix a few 6.16 regressions: rare UAF in the foreground allocator path
when taking a transaction restart from the transaction bump
allocator, and some small fallout from the change to log the error
being corrected in the journal when repairing errors, also some
fallout from the btree node read error logging improvements.
(Alan, Bharadwaj)
- New option: journal_rewind
This lets the entire filesystem be reset to an earlier point in time.
Note that this is only a disaster recovery tool, and right now there
are major caveats to using it (discards should be disabled, in
particular), but it successfully restored the filesystem of one of
the users who was bit by the subvolume deletion bug and didn't have
backups. I'll likely be making some changes to the discard path in
the future to make this a reliable recovery tool.
- Some new btree iterator tracepoints, for tracking down some
livelock-ish behaviour we've been seeing in the main data write path.
* tag 'bcachefs-2025-06-26' of git://evilpiepirate.org/bcachefs: (51 commits)
bcachefs: Plumb correct ip to trans_relock_fail tracepoint
bcachefs: Ensure we rewind to run recovery passes
bcachefs: Ensure btree node scan runs before checking for scanned nodes
bcachefs: btree_root_unreadable_and_scan_found_nothing should not be autofix
bcachefs: fix bch2_journal_keys_peek_prev_min() underflow
bcachefs: Use wait_on_allocator() when allocating journal
bcachefs: Check for bad write buffer key when moving from journal
bcachefs: Don't unlock the trans if ret doesn't match BCH_ERR_operation_blocked
bcachefs: Fix range in bch2_lookup_indirect_extent() error path
bcachefs: fix spurious error_throw
bcachefs: Add missing bch2_err_class() to fileattr_set()
bcachefs: Add missing key type checks to check_snapshot_exists()
bcachefs: Don't log fsck err in the journal if doing repair elsewhere
bcachefs: Fix *__bch2_trans_subbuf_alloc() error path
bcachefs: Fix missing newlines before ero
bcachefs: fix spurious error in read_btree_roots()
bcachefs: fsck: Fix oops in key_visible_in_snapshot()
bcachefs: fsck: fix unhandled restart in topology repair
bcachefs: fsck: Fix check_directory_structure when no check_dirents
bcachefs: Fix restart handling in btree_node_scrub_work()
...
Linus Torvalds [Thu, 26 Jun 2025 19:26:39 +0000 (12:26 -0700)]
Merge tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
applied for nios2, but never sent upstream.
- Fix extra '/' in fsl,ls1028a-reset '$id' path
- Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.
* tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: serial: Convert altr,uart-1.0 to DT schema
dt-bindings: serial: Convert altr,juart-1.0 to DT schema
dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id
dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
Jens Axboe [Thu, 26 Jun 2025 18:17:48 +0000 (12:17 -0600)]
io_uring/kbuf: flag partial buffer mappings
A previous commit aborted mapping more for a non-incremental ring for
bundle peeking, but depending on where in the process this peeking
happened, it would not necessarily prevent a retry by the user. That can
create gaps in the received/read data.
Add struct buf_sel_arg->partial_map, which can pass this information
back. The networking side can then map that to internal state and use it
to gate retry as well.
Since this necessitates a new flag, change io_sr_msg->retry to a
retry_flags member, and store both the retry and partial map condition
in there.
Cc: stable@vger.kernel.org Fixes: 26ec15e4b0c1 ("io_uring/kbuf: don't truncate end buffer for multiple buffer peeks") Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'nvme-6.16-2025-06-26' of git://git.infradead.org/nvme:
nvme: fix atomic write size validation
nvme: refactor the atomic write unit detection
nvme: reset delayed remove_work after reconnect
Michal Wajdeczko [Thu, 12 Jun 2025 22:09:36 +0000 (00:09 +0200)]
drm/xe: Process deferred GGTT node removals on device unwind
While we are indirectly draining our dedicated workqueue ggtt->wq
that we use to complete asynchronous removal of some GGTT nodes,
this happends as part of the managed-drm unwinding (ggtt_fini_early),
which could be later then manage-device unwinding, where we could
already unmap our MMIO/GMS mapping (mmio_fini).
This was recently observed during unsuccessful VF initialization:
Michal Wajdeczko [Thu, 12 Jun 2025 22:09:37 +0000 (00:09 +0200)]
drm/xe/guc: Explicitly exit CT safe mode on unwind
During driver probe we might be briefly using CT safe mode, which
is based on a delayed work, but usually we are able to stop this
once we have IRQ fully operational. However, if we abort the probe
quite early then during unwind we might try to destroy the workqueue
while there is still a pending delayed work that attempts to restart
itself which triggers a WARN.
This was recently observed during unsuccessful VF initialization:
Maarten Lankhorst [Fri, 6 Jun 2025 10:45:47 +0000 (11:45 +0100)]
drm/xe: Move DSB l2 flush to a more sensible place
Flushing l2 is only needed after all data has been written.
Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340") Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: stable@vger.kernel.org # v6.12+ Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://lore.kernel.org/r/20250606104546.1996818-3-matthew.auld@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 0dd2dd0182bc444a62652e89d08c7f0e4fde15ba) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Christoph Hellwig [Wed, 11 Jun 2025 04:54:56 +0000 (06:54 +0200)]
nvme: fix atomic write size validation
Don't mix the namespace and controller values, and validate the
per-controller limit when probing the controller. This avoid spurious
failures for controllers with namespaces that have different namespaces
with different logical block sizes, or report the per-namespace values
only for some namespaces.
It also fixes a missing queue_limits_cancel_update in an error path by
removing that error path.
Fixes: 8695f060a029 ("nvme: all namespaces in a subsystem must adhere to a common atomic write size") Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Tested-by: Yi Zhang <yi.zhang@redhat.com>
Keith Busch [Wed, 11 Jun 2025 04:50:47 +0000 (06:50 +0200)]
nvme: reset delayed remove_work after reconnect
The remove_work will proceed with permanently disconnecting on the
initial final path failure if the head shows no paths after the delay.
If a new path connects while the remove_work is pending, and if that new
path happens to disconnect before that remove_work executes, the delayed
removal should reset based on the most recent path disconnect time, but
queue_delayed_work() won't do anything if the work is already pending.
Attempt to cancel the delayed work when a new path connects, and use
mod_delayed_work() in case the remove_work remains pending anyway.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Jiawen Wu [Wed, 25 Jun 2025 02:39:24 +0000 (10:39 +0800)]
net: libwx: fix the creation of page_pool
'rx_ring->size' means the count of ring descriptors multiplied by the
size of one descriptor. When increasing the count of ring descriptors,
it may exceed the limit of pool size.
[ 864.209610] page_pool_create_percpu() gave up with errno -7
[ 864.209613] txgbe 0000:11:00.0: Page pool creation failed: -7
Fix to set the pool_size to the count of ring descriptors.
Fixes: 850b971110b2 ("net: libwx: Allocate Rx and Tx resources") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/434C72BFB40E350A+20250625023924.21821-1-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Tue, 24 Jun 2025 18:32:58 +0000 (11:32 -0700)]
net: selftests: fix TCP packet checksum
The length in the pseudo header should be the length of the L3 payload
AKA the L4 header+payload. The selftest code builds the packet from
the lower layers up, so all the headers are pushed already when it
constructs L4. We need to subtract the lower layer headers from skb->len.
Salvatore Bonaccorso [Wed, 25 Jun 2025 18:41:28 +0000 (20:41 +0200)]
ALSA: hda/realtek: Fix built-in mic on ASUS VivoBook X507UAR
The built-in mic of ASUS VivoBook X507UAR is broken recently by the fix
of the pin sort. The fixup ALC256_FIXUP_ASUS_MIC_NO_PRESENCE is working
for addressing the regression, too.
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort") Reported-by: Igor Tamara <igor.tamara@gmail.com> Closes: https://bugs.debian.org/1108069 Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Link: https://lore.kernel.org/CADdHDco7_o=4h_epjEAb92Dj-vUz_PoTC2-W9g5ncT2E0NzfeQ@mail.gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Thu, 26 Jun 2025 04:09:02 +0000 (21:09 -0700)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix use-after-free in libbpf when map is resized (Adin Scannell)
- Fix verifier assumptions about 2nd argument of bpf_sysctl_get_name
(Jerome Marchand)
- Fix verifier assumption of nullness of d_inode in dentry (Song Liu)
- Fix global starvation of LRU map (Willem de Bruijn)
- Fix potential NULL dereference in btf_dump__free (Yuan Chen)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: adapt one more case in test_lru_map to the new target_free
libbpf: Fix possible use-after-free for externs
selftests/bpf: Convert test_sysctl to prog_tests
bpf: Specify access type of bpf_sysctl_get_name args
libbpf: Fix null pointer dereference in btf_dump__free on allocation failure
bpf: Adjust free target to avoid global starvation of LRU map
bpf: Mark dentry->d_inode as trusted_or_null
Kent Overstreet [Wed, 25 Jun 2025 04:48:14 +0000 (00:48 -0400)]
bcachefs: Ensure we rewind to run recovery passes
Fix a 6.16 regression from the recovery pass rework, which introduced a
bug where calling bch2_run_explicit_recovery_pass() would only return
the error code to rewind recovery for the first call that scheduled that
recovery pass.
If the error code from the first call was swallowed (because it was
called by an asynchronous codepath), subsequent calls would go "ok, this
pass is already marked as needing to run" and return 0.
Fixing this ensures that check_topology bails out to run btree_node_scan
before doing any repair.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Wed, 25 Jun 2025 16:45:11 +0000 (12:45 -0400)]
bcachefs: Ensure btree node scan runs before checking for scanned nodes
Previously, calling bch2_btree_has_scanned_nodes() when btree node
scan hadn't actually run would erroniously return false - causing us to
think a btree was entirely gone.
This fixes a 6.16 regression from moving the scheduling of btree node
scan out of bch2_btree_lost_data() (fixing the bug where we'd schedule
it persistently in the superblock) and only scheduling it when
check_toploogy() is asking for scanned btree nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Linus Torvalds [Thu, 26 Jun 2025 03:48:48 +0000 (20:48 -0700)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount fixes from Al Viro:
"Several mount-related fixes"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
userns and mnt_idmap leak in open_tree_attr(2)
attach_recursive_mnt(): do not lock the covering tree when sliding something under it
replace collect_mounts()/drop_collected_mounts() with a safer variant
Kuniyuki Iwashima [Tue, 24 Jun 2025 21:45:00 +0000 (14:45 -0700)]
atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister().
syzbot reported a warning below during atm_dev_register(). [0]
Before creating a new device and procfs/sysfs for it, atm_dev_register()
looks up a duplicated device by __atm_dev_lookup(). These operations are
done under atm_dev_mutex.
However, when removing a device in atm_dev_deregister(), it releases the
mutex just after removing the device from the list that __atm_dev_lookup()
iterates over.
So, there will be a small race window where the device does not exist on
the device list but procfs/sysfs are still not removed, triggering the
splat.
Let's hold the mutex until procfs/sysfs are removed in
atm_dev_deregister().
====================
netlink: specs: enforce strict naming of properties
I got annoyed once again by the name properties in the ethtool spec
which use underscore instead of dash. I previously assumed that there
is a lot of such properties in the specs so fixing them now would
be near impossible. On a closer look, however, I only found 22
(rough grep suggests we have ~4.8k names in the specs, so bad ones
are just 0.46%).
Add a regex to the JSON schema to enforce the naming, fix the few
bad names. I was hoping we could start enforcing this from newer
families, but there's no correlation between the protocol and the
number of errors. If anything classic netlink has more recently
added specs so it has fewer errors.
The regex is just for name properties which will end up visible
to the user (in Python or YNL CLI). I left the c-name properties
alone, those don't matter as much. C codegen rewrites them, anyway.
I'm not updating the spec for genetlink-c. Looks like it has no
users, new families use genetlink, all old ones need genetlink-legacy.
If these patches are merged I will remove genetlink-c completely
in net-next.
====================
Jakub Kicinski [Tue, 24 Jun 2025 21:10:02 +0000 (14:10 -0700)]
netlink: specs: enforce strict naming of properties
Add a regexp to make sure all names which may end up being visible
to the user consist of lower case characters, numbers and dashes.
Underscores keep sneaking into the specs, which is not visible
in the C code but makes the Python and alike inconsistent.
Note that starting with a number is okay, as in C the full
name will include the family name.
For legacy families we can't enforce the naming in the family
name or the multicast group names, as these are part of the
binary uAPI of the kernel.
For classic netlink we need to allow capital letters in names
of struct members. TC has some structs with capitalized members.
Jakub Kicinski [Tue, 24 Jun 2025 21:10:01 +0000 (14:10 -0700)]
netlink: specs: tc: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Jakub Kicinski [Tue, 24 Jun 2025 21:10:00 +0000 (14:10 -0700)]
netlink: specs: rt-link: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: b2f63d904e72 ("doc/netlink: Add spec for rt link messages") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250624211002.3475021-9-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:59 +0000 (14:09 -0700)]
netlink: specs: mptcp: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: bc8aeb2045e2 ("Documentation: netlink: add a YAML spec for mptcp") Reviewed-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250624211002.3475021-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:58 +0000 (14:09 -0700)]
netlink: specs: ovs_flow: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 93b230b549bc ("netlink: specs: add ynl spec for ovs_flow") Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Eelco Chaudron <echaudro@redhat.com> Link: https://patch.msgid.link/20250624211002.3475021-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:57 +0000 (14:09 -0700)]
netlink: specs: devlink: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 429ac6211494 ("devlink: define enum for attr types of dynamic attributes") Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250624211002.3475021-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:56 +0000 (14:09 -0700)]
netlink: specs: dpll: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML") Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250624211002.3475021-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:55 +0000 (14:09 -0700)]
netlink: specs: ethtool: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen replaces special chars in names)
but gives more uniform naming in Python.
Fixes: 13e59344fb9d ("net: ethtool: add support for symmetric-xor RSS hash") Fixes: 46fb3ba95b93 ("ethtool: Add an interface for flashing transceiver modules' firmware") Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250624211002.3475021-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:54 +0000 (14:09 -0700)]
netlink: specs: fou: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Jakub Kicinski [Tue, 24 Jun 2025 21:09:53 +0000 (14:09 -0700)]
netlink: specs: nfsd: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 13727f85b49b ("NFSD: introduce netlink stubs") Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20250624211002.3475021-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Tue, 24 Jun 2025 16:35:12 +0000 (17:35 +0100)]
net: enetc: Correct endianness handling in _enetc_rd_reg64
enetc_hw.h provides two versions of _enetc_rd_reg64.
One which simply calls ioread64() when available.
And another that composes the 64-bit result from ioread32() calls.
In the second case the code appears to assume that each ioread32() call
returns a little-endian value. However both the shift and logical or
used to compose the return value would not work correctly on big endian
systems if this were the case. Moreover, this is inconsistent with the
first case where the return value of ioread64() is assumed to be in host
byte order.
It appears that the correct approach is for both versions to treat the
return value of ioread*() functions as being in host byte order. And
this patch corrects the ioread32()-based version to do so.
This is a bug but would only manifest on big endian systems
that make use of the ioread32-based implementation of _enetc_rd_reg64.
While all in-tree users of this driver are little endian and
make use of the ioread64-based implementation of _enetc_rd_reg64.
Thus, no in-tree user of this driver is affected by this bug.
Adin Scannell [Wed, 25 Jun 2025 05:02:15 +0000 (22:02 -0700)]
libbpf: Fix possible use-after-free for externs
The `name` field in `obj->externs` points into the BTF data at initial
open time. However, some functions may invalidate this after opening and
before loading (e.g. `bpf_map__set_value_size`), which results in
pointers into freed memory and undefined behavior.
The simplest solution is to simply `strdup` these strings, similar to
the `essent_name`, and free them at the same time.
In order to test this path, the `global_map_resize` BPF selftest is
modified slightly to ensure the presence of an extern, which causes this
test to fail prior to the fix. Given there isn't an obvious API or error
to test against, I opted to add this to the existing test as an aspect
of the resizing feature rather than duplicate the test.
Li Ming [Fri, 20 Jun 2025 05:29:24 +0000 (13:29 +0800)]
cxl/edac: Fix using wrong repair type to check dram event record
cxl_find_rec_dram() is used to find a DRAM event record based on the
inputted attributes. Different repair_type of the inputted attributes
will check the DRAM event record in different ways.
When EDAC driver is performing a memory rank sparing, it should use
CXL_RANK_SPARING rather than CXL_BANK_SPARING as repair_type for DRAM
event record checking.
Fixes: 588ca944c277 ("cxl/edac: Add CXL memory device memory sparing control feature") Signed-off-by: Li Ming <ming.li@zohomail.com> Reviewed-by: Shiju Jose <shiju.jose@huawei.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Link: https://patch.msgid.link/20250620052924.138892-1-ming.li@zohomail.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Linus Torvalds [Wed, 25 Jun 2025 18:20:14 +0000 (11:20 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes all in drivers.
ufs and megaraid_sas are small and obvious.
The large diffstat in fnic comes from two pieces: the addition of
quite a bit of logging (no change to function) and the reworking of
the timeout allocation path for the two conditions that can occur
simultaneously to prevent reusing the same abort frame and then both
trying to free it"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fnic: Fix missing DMA mapping error in fnic_send_frame()
scsi: fnic: Set appropriate logging level for log message
scsi: fnic: Add and improve logs in FDMI and FDMI ABTS paths
scsi: fnic: Turn off FDMI ACTIVE flags on link down
scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out
scsi: ufs: core: Fix clk scaling to be conditional in reset and restore
scsi: megaraid_sas: Fix invalid node index
Linus Torvalds [Wed, 25 Jun 2025 18:13:31 +0000 (11:13 -0700)]
Merge tag 'uml-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Johannes Berg:
- fix FP registers in seccomp mode
- prevent duplicate devices in VFIO support
- don't ignore errors in UBD thread start
- reduce stack use with clang 19
* tag 'uml-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: vector: Reduce stack usage in vector_eth_configure()
um: Use correct data source in fpregs_legacy_set()
um: vfio: Prevent duplicate device assignments
um: ubd: Add missing error check in start_io_thread()
Jakub Kicinski [Wed, 25 Jun 2025 17:26:16 +0000 (10:26 -0700)]
Merge tag 'wireless-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few fixes:
- iwlegacy: work around large stack with clang/kasan
- mac80211: fix integer overflow
- mac80211: fix link struct init vs. RCU publish
- iwlwifi: fix warning on IFF_UP
* tag 'wireless-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: finish link init before RCU publish
wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version
wifi: mac80211: fix beacon interval calculation overflow
wifi: iwlegacy: work around excessive stack usage on clang/kasan
====================
Jens Axboe [Wed, 25 Jun 2025 16:17:06 +0000 (10:17 -0600)]
io_uring/net: mark iov as dynamically allocated even for single segments
A bigger array of vecs could've been allocated, but
io_ring_buffers_peek() still decided to cap the mapped range depending
on how much data was available. Hence don't rely on the segment count
to know if the request should be marked as needing cleanup, always
check upfront if the iov array is different than the fast_iov array.
Fixes: 26ec15e4b0c1 ("io_uring/kbuf: don't truncate end buffer for multiple buffer peeks") Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jayesh Choudhary [Tue, 24 Jun 2025 04:48:35 +0000 (10:18 +0530)]
drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type
By default, HPD was disabled on SN65DSI86 bridge. When the driver was
added (commit "a095f15c00e27"), the HPD_DISABLE bit was set in pre-enable
call which was moved to other function calls subsequently.
Later on, commit "c312b0df3b13" added detect utility for DP mode. But with
HPD_DISABLE bit set, all the HPD events are disabled[0] and the debounced
state always return 1 (always connected state).
Set HPD_DISABLE bit conditionally based on display sink's connector type.
Since the HPD_STATE is reflected correctly only after waiting for debounce
time (~100-400ms) and adding this delay in detect() is not feasible
owing to the performace impact (glitches and frame drop), remove runtime
calls in detect() and add hpd_enable()/disable() bridge hooks with runtime
calls, to detect hpd properly without any delay.
Fixes: c312b0df3b13 ("drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP") Cc: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250624044835.165708-1-j-choudhary@ti.com
Niklas Cassel [Tue, 24 Jun 2025 07:40:30 +0000 (09:40 +0200)]
ata: ahci: Use correct DMI identifier for ASUSPRO-D840SA LPM quirk
ASUS store the board name in DMI_PRODUCT_NAME rather than
DMI_PRODUCT_VERSION. (Apparently it is only Lenovo that stores the
model-name in DMI_PRODUCT_VERSION.)
Use the correct DMI identifier, DMI_PRODUCT_NAME, to match the
ASUSPRO-D840SA board, such that the quirk actually gets applied.
Cc: stable@vger.kernel.org Reported-by: Andy Yang <andyybtc79@gmail.com> Tested-by: Andy Yang <andyybtc79@gmail.com> Closes: https://lore.kernel.org/linux-ide/aFb3wXAwJSSJUB7o@ryzen/ Fixes: b5acc3628898 ("ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard") Reviewed-by: Hans de Goede <hansg@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250624074029.963028-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tiwei Bie [Mon, 23 Jun 2025 11:08:29 +0000 (19:08 +0800)]
um: vector: Reduce stack usage in vector_eth_configure()
When compiling with clang (19.1.7), initializing *vp using a compound
literal may result in excessive stack usage. Fix it by initializing the
required fields of *vp individually.
Arnd Bergmann [Fri, 20 Jun 2025 11:18:18 +0000 (13:18 +0200)]
drm/i915: fix build error some more
An earlier patch fixed a build failure with clang, but I still see the
same problem with some configurations using gcc:
drivers/gpu/drm/i915/i915_pmu.c: In function 'config_mask':
include/linux/compiler_types.h:568:38: error: call to '__compiletime_assert_462' declared with attribute error: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1
drivers/gpu/drm/i915/i915_pmu.c:116:3: note: in expansion of macro 'BUILD_BUG_ON'
116 | BUILD_BUG_ON(bit >
As I understand it, the problem is that the function is not always fully
inlined, but the __builtin_constant_p() can still evaluate the argument
as being constant.
Marking it as __always_inline so far works for me in all configurations.
Fixes: a7137b1825b5 ("drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled") Fixes: a644fde77ff7 ("drm/i915/pmu: Change bitmask of enabled events to u32") Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20250620111824.3395007-1-arnd@kernel.org Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit ef69f9dd1cd7301cdf04ba326ed28152a3affcf6) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Pei Xiao [Tue, 24 Jun 2025 09:00:47 +0000 (17:00 +0800)]
ALSA: usb: qcom: fix NULL pointer dereference in qmi_stop_session
The find_substream() call may return NULL, but the error path
dereferenced 'subs' unconditionally via dev_err(&subs->dev->dev, ...),
causing a NULL pointer dereference when subs is NULL.
Fix by switching to &uadev[idx].udev->dev which is always valid
in this context.
Pavel Begunkov [Tue, 24 Jun 2025 13:40:34 +0000 (14:40 +0100)]
io_uring/rsrc: don't rely on user vaddr alignment
There is no guaranteed alignment for user pointers, however the
calculation of an offset of the first page into a folio after coalescing
uses some weird bit mask logic, get rid of it.
We can pin a tail page of a folio, but then io_uring will try to unpin
the head page of the folio. While it should be fine in terms of keeping
the page actually alive, mm folks say it's wrong and triggers a debug
warning. Use unpin_user_folio() instead of unpin_user_page*.
Cc: stable@vger.kernel.org Debugged-by: David Hildenbrand <david@redhat.com> Reported-by: syzbot+1d335893772467199ab6@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/683f1551.050a0220.55ceb.0017.GAE@google.com Fixes: a8edbb424b139 ("io_uring/rsrc: enable multi-hugepage buffer coalescing") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/io-uring/a28b0f87339ac2acf14a645dad1e95bbcbf18acd.1750771718.git.asml.silence@gmail.com/
[axboe: adapt to current tree, massage commit message] Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Tue, 24 Jun 2025 10:41:21 +0000 (18:41 +0800)]
ublk: setup ublk_io correctly in case of ublk_get_data() failure
If ublk_get_data() fails, -EIOCBQUEUED is returned and the current command
becomes ASYNC. And the only reason is that mapping data can't move on,
because of no enough pages or pending signal, then the current ublk request
has to be requeued.
Once the request need to be requeued, we have to setup `ublk_io` correctly,
including io->cmd and flags, otherwise the request may not be forwarded to
ublk server successfully.
Fixes: 9810362a57cb ("ublk: don't call ublk_dispatch_req() for NEED_GET_DATA") Reported-by: Changhui Zhong <czhong@redhat.com> Closes: https://lore.kernel.org/linux-block/CAGVVp+VN9QcpHUz_0nasFf5q9i1gi8H8j-G-6mkBoqa3TyjRHA@mail.gmail.com/ Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Changhui Zhong <czhong@redhat.com> Link: https://lore.kernel.org/r/20250624104121.859519-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk: update UBLK_F_SUPPORT_ZERO_COPY comment in UAPI header
UBLK_F_SUPPORT_ZERO_COPY has a very old comment describing the initial
idea for how zero-copy would be implemented. The actual implementation
added in commit 1f6540e2aabb ("ublk: zc register/unregister bvec") uses
io_uring registered buffers rather than shared memory mapping.
Remove the inaccurate remarks about mapping ublk request memory into the
ublk server's address space and requiring 4K block size. Replace them
with a description of the current zero-copy mechanism.
When a C++ file compiled with -Wc++11-narrowing includes the UAPI header
linux/ublk_cmd.h, ublk_sqe_addr_to_auto_buf_reg()'s assignments of u64
values to u8, u16, and u32 fields result in compiler warnings. Add
explicit casts to the intended types to avoid these warnings. Drop the
unnecessary bitmasks.
Reported-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Fixes: 99c1e4eb6a3f ("ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG") Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250621162842.337452-1-csander@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Wed, 25 Jun 2025 02:25:54 +0000 (10:25 +0800)]
ublk: build batch from IOs in same io_ring_ctx and io task
ublk_queue_cmd_list() dispatches the whole batch list by scheduling task
work via the tail request's io_uring_cmd, this way is fine even though
more than one io_ring_ctx are involved for this batch since it is just
one running context.
However, the task work handler ublk_cmd_list_tw_cb() takes `issue_flags`
of tail uring_cmd's io_ring_ctx for completing all commands. This way is
wrong if any uring_cmd is issued from different io_ring_ctx.
Fixes it by always building batch IOs from same io_ring_ctx and io task
because ublk_dispatch_req() does validate task context, and IO needs to
be aborted in case of running from fallback task work context.
For typical per-queue or per-io daemon implementation, this way shouldn't
make difference from performance viewpoint, because single io_ring_ctx is
taken in each daemon for normal use case.
From the crash dump, we found that the cpu_map_flush_list inside
redirect info is partially corrupted: its list_head->next points to
itself, but list_head->prev points to a valid list of unflushed bq
entries.
This turned out to be a result of missed XDP flush on redirect lists. By
digging in the actual source code, we found that
commit 7f0a168b0441 ("bnxt_en: Add completion ring pointer in TX and RX
ring structures") incorrectly overwrites the event mask for XDP_REDIRECT
in bnxt_rx_xdp. We can stably reproduce this crash by returning XDP_TX
and XDP_REDIRECT randomly for incoming packets in a naive XDP program.
Properly propagate the XDP_REDIRECT events back fixes the crash.
Fixes: a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers") Tested-by: Andrew Rzeznik <arzeznik@cloudflare.com> Signed-off-by: Yan Zhai <yan@cloudflare.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Link: https://patch.msgid.link/aFl7jpCNzscumuN2@debian.debian Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 25 Jun 2025 00:20:43 +0000 (17:20 -0700)]
Merge tag 'selinux-pr-20250624' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"Another small SELinux patch to fix a problem seen by the dracut-ng
folks during early boot when SELinux is enabled, but the policy has
yet to be loaded"
* tag 'selinux-pr-20250624' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: change security_compute_sid to return the ssid or tsid on match
If a userspace application just include <linux/vm_sockets.h> will fail
to build with the following errors:
/usr/include/linux/vm_sockets.h:182:39: error: invalid application of ‘sizeof’ to incomplete type ‘struct sockaddr’
182 | unsigned char svm_zero[sizeof(struct sockaddr) -
| ^~~~~~
/usr/include/linux/vm_sockets.h:183:39: error: ‘sa_family_t’ undeclared here (not in a function)
183 | sizeof(sa_family_t) -
|
Include <sys/socket.h> for userspace (guarded by ifndef __KERNEL__)
where `struct sockaddr` and `sa_family_t` are defined.
We already do something similar in <linux/mptcp.h> and <linux/if.h>.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20250623100053.40979-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alan Huang [Tue, 24 Jun 2025 19:10:27 +0000 (03:10 +0800)]
bcachefs: Don't unlock the trans if ret doesn't match BCH_ERR_operation_blocked
Reported-by: syzbot+d540192e763531d307ff@syzkaller.appspotmail.com Signed-off-by: Alan Huang <mmpgouride@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Karthik Poosa [Tue, 17 Jun 2025 12:00:30 +0000 (17:30 +0530)]
drm/xe/hwmon: Fix xe_hwmon_power_max_write
Prevent other bits of mailbox power limit from being overwritten with 0.
This issue was due to a missing read and modify of current power limit,
before setting a requested mailbox power limit, which is added in this
patch.
v2:
- Improve commit message. (Anshuman)
v3:
- Rebase.
- Rephrase commit message. (Riana)
- Add read-modify-write variant of xe_hwmon_pcode_write_power_limit()
i.e. xe_hwmon_pcode_rmw_power_limit(). (Badal)
- Use xe_hwmon_pcode_rmw_power_limit() to set mailbox power limits.
- Remove xe_hwmon_pcode_write_power_limit() as all mailbox power limits
writes use xe_hwmon_pcode_rmw_power_limit() only.
v4:
- Use PWR_LIM in place of (PWR_LIM_EN | PWR_LIM_VAL) wherever
applicable. (Riana)
Fixes: 25a2aa779fc3 ("drm/xe/hwmon: Add support to manage power limits though mailbox") Reviewed-by: Riana Tauro <riana.tauro@intel.com> Signed-off-by: Karthik Poosa <karthik.poosa@intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://lore.kernel.org/r/20250617120030.612819-1-karthik.poosa@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8aa7306631f088881759398972d503757cf0c901) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Having PM put sync in remove function is causing PM underflow during
remove operation. This is caused by the function, runtime_pm_get_sync,
not being called anywhere during the op. Ensure that calls to
pm_runtime_enable()/pm_runtime_disable() and
pm_runtime_get_sync()/pm_runtime_put_sync() match.
Continuous bind/unbind will result in an "Unbalanced pm_runtime_enable" error.
Subsequent unbind attempts will return a "No such device" error, while bind
attempts will return a "Resource temporarily unavailable" error.
Also, change clk_disable_unprepare() to clk_disable() since continuous
bind and unbind operations will trigger a warning indicating that the clock is
already unprepared.
Takashi Iwai [Mon, 16 Jun 2025 16:08:41 +0000 (18:08 +0200)]
drm/amd/display: Add sanity checks for drm_edid_raw()
When EDID is retrieved via drm_edid_raw(), it doesn't guarantee to
return proper EDID bytes the caller wants: it may be either NULL (that
leads to an Oops) or with too long bytes over the fixed size raw_edid
array (that may lead to memory corruption). The latter was reported
actually when connected with a bad adapter.
Add sanity checks for drm_edid_raw() to address the above corner
cases, and return EDID_BAD_INPUT accordingly.
Mario Limonciello [Mon, 23 Jun 2025 17:11:13 +0000 (12:11 -0500)]
drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value
[Why]
commit 16dc8bc27c2a ("drm/amd/display: Export full brightness range to
userspace") adjusted the brightness range to scale to larger values, but
missed updating AMDGPU_MAX_BL_LEVEL which is needed to make sure that
scaling works properly with custom brightness curves.
[How]
As the change for max brightness of 0xFFFF only applies to devices
supporting DC, use existing DC define MAX_BACKLIGHT_LEVEL.
Mario Limonciello [Tue, 17 Jun 2025 18:30:52 +0000 (13:30 -0500)]
drm/amd: Adjust output for discovery error handling
commit 017fbb6690c2 ("drm/amdgpu/discovery: check ip_discovery fw file
available") added support for reading an amdgpu IP discovery bin file
for some specific products. If it's not found then it will fallback to
hardcoded values. However if it's not found there is also a lot of noise
about missing files and errors.
Adjust the error handling to decrease most messages to DEBUG and to show
users less about missing files.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4312 Tested-by: Marcus Seyfarth <m.seyfarth@gmail.com> Fixes: 017fbb6690c2 ("drm/amdgpu/discovery: check ip_discovery fw file available") Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250617183052.1692059-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 49f1f9f6c3c9febf8ba93f94a8d9c8d03e1ea0a1)
Srinivasan Shanmugam [Thu, 12 Jun 2025 14:41:14 +0000 (20:11 +0530)]
drm/amdgpu/gfx9: Add Cleaner Shader Support for GFX9.x GPUs
Enable the cleaner shader for other GFX9.x series of GPUs to provide
data isolation between GPU workloads. The cleaner shader is responsible
for clearing the Local Data Store (LDS), Vector General Purpose
Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which
helps prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX9.x GPUs, previously
available for GFX9.4.2. It enhances security by clearing GPU memory
between processes and maintains a consistent GPU state across KGD and
KFD workloads.
Cc: Manu Rastogi <manu.rastogi@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99808926d0ea6234a89e35240a7cb088368de9e1)
Al Viro [Tue, 24 Jun 2025 14:25:04 +0000 (10:25 -0400)]
userns and mnt_idmap leak in open_tree_attr(2)
Once want_mount_setattr() has returned a positive, it does require
finish_mount_kattr() to release ->mnt_userns. Failing do_mount_setattr()
does not change that.
As the result, we can end up leaking userns and possibly mnt_idmap as
well.
Fixes: c4a16820d901 ("fs: add open_tree_attr()") Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Johannes Berg [Tue, 24 Jun 2025 11:07:49 +0000 (13:07 +0200)]
wifi: mac80211: finish link init before RCU publish
Since the link/conf pointers can be accessed without any
protection other than RCU, make sure the data is actually
set up before publishing the structures.
projects / users / jedix / linux-maple.git / log