Qii Wang [Sat, 17 Apr 2021 06:46:52 +0000 (14:46 +0800)]
i2c: mediatek: Use scl_int_delay_ns to compensate clock-stretching
The parameters of tSU,STA/tHD,STA/tSU,STOP maybe out of spec due
to device clock-stretch or circuit loss, we could get a suitable
scl_int_delay_ns from i2c_timings to compensate these parameters
to meet the spec via EXT_CONF register.
Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Qii Wang [Sat, 17 Apr 2021 06:46:50 +0000 (14:46 +0800)]
i2c: mediatek: Fix send master code at more than 1MHz
There are some omissions in the previous patch about replacing
I2C_MAX_FAST_MODE__FREQ with I2C_MAX_FAST_MODE_PLUS_FREQ and
need to fix it.
Fixes: b44658e755b5("i2c: mediatek: Send i2c master code at more than 1MHz") Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
While adding the invalid IRQ check after calling platform_get_irq(),
I managed to overlook that the driver has a complex error path in its
probe() method, thus a simple *return* couldn't be used. Use a proper
*goto* instead!
Tian Tao [Mon, 5 Apr 2021 08:18:42 +0000 (16:18 +0800)]
i2c: core: Fix spacing error by checkpatch
Fix the following checkpatch error:
#614: FILE: drivers/i2c/i2c-core-base.c:614:
+ len = acpi_device_modalias(dev, buf, PAGE_SIZE -1);
^
No functional changes.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Marek Behún [Thu, 8 Apr 2021 02:00:00 +0000 (04:00 +0200)]
i2c: mv64xxx: Fix random system lock caused by runtime PM
I noticed a weird bug with this driver on Marvell CN9130 Customer
Reference Board.
Sometime after boot, the system locks with the following message:
[104.071363] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
The system does not respond afterwards, only warns about RCU stalls.
This first appeared with commit e5c02cf54154 ("i2c: mv64xxx: Add runtime
PM support").
With further experimentation I discovered that adding a delay into
mv64xxx_i2c_hw_init() fixes this issue. This function is called before
every xfer, due to how runtime PM works in this driver. It seems that in
order to work correctly, a delay is needed after the bus is reset in
this function.
Since there already is a known erratum with this controller needing a
delay, I assume that this is just another place this needs to be
applied. Therefore I apply the delay only if errata_delay is true.
Signed-off-by: Marek Behún <kabel@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Andy Shevchenko [Wed, 14 Apr 2021 22:33:25 +0000 (10:33 +1200)]
i2c: mpc: Drop duplicate message from devm_platform_ioremap_resource()
devm_platform_ioremap_resource() prints a message in case of error.
Drop custom one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Andy Shevchenko [Wed, 14 Apr 2021 22:33:24 +0000 (10:33 +1200)]
i2c: mpc: Use device_get_match_data() helper
Use the device_get_match_data() helper instead of open coding.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Andy Shevchenko [Wed, 14 Apr 2021 22:33:23 +0000 (10:33 +1200)]
i2c: mpc: Remove CONFIG_PM_SLEEP ifdeffery
Use __maybe_unused for the suspend()/resume() hooks and get rid of
the CONFIG_PM_SLEEP ifdeffery to improve the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Andy Shevchenko [Wed, 14 Apr 2021 22:33:22 +0000 (10:33 +1200)]
i2c: mpc: Use devm_clk_get_optional()
The peripheral clock is optional and we may get an -EPROBE_DEFER error code
which would not be propagated correctly, fix this by using
devm_clk_get_optional().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Chris Packham [Wed, 14 Apr 2021 22:33:20 +0000 (10:33 +1200)]
i2c: mpc: Interrupt driven transfer
The fsl-i2c controller will generate an interrupt after every byte
transferred. Make use of this interrupt to drive a state machine which
allows the next part of a transfer to happen as soon as the interrupt is
received. This is particularly helpful with SMBUS devices like the LM81
which will timeout if we take too long between bytes in a transfer.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with the
invalid IRQ #s.
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: b5b5b32081cd ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: ba92222ed63a ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Qinglang Miao [Tue, 1 Dec 2020 09:31:43 +0000 (17:31 +0800)]
i2c: omap: fix reference leak when pm_runtime_get_sync fails
The PM reference count is not expected to be incremented on
return in omap_i2c_probe() and omap_i2c_remove().
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here. I Replace it with pm_runtime_resume_and_get
to keep usage counter balanced.
What's more, error path 'err_free_mem' seems not like a proper
name any more. So I change the name to err_disable_pm and move
pm_runtime_disable below, for pm_runtime of 'pdev->dev' should
be disabled when pm_runtime_resume_and_get fails.
Fixes: 3b0fb97c8dc4 ("I2C: OMAP: Handle error check for pm runtime") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Bixuan Cui [Sat, 10 Apr 2021 03:50:44 +0000 (11:50 +0800)]
i2c: sprd: Add missing MODULE_DEVICE_TABLE
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Chris Packham [Tue, 13 Apr 2021 05:09:54 +0000 (17:09 +1200)]
i2c: mpc: Remove redundant NULL check
In mpc_i2c_get_fdr_8xxx div is assigned as we iterate through the
mpc_i2c_dividers_8xxx array. By the time we exit the loop div will
either have the value that matches the requested speed or be pointing at
the last entry in mpc_i2c_dividers_8xxx. Checking for div being NULL
after the loop is redundant so remove the check.
Reported-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
i2c: mpc: drop release for resource allocated with devm_*
It's not necessary to release resource which allocated with devm_*
and those release may leads to a double free. And also remove useless
irq_dispose_mapping() call since mapping not created.
Fixes: 09aab7add7bf ("i2c: mpc: use device managed APIs") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Merge tag 'for-5.12-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more patch that we'd like to get to 5.12 before release.
It's changing where and how the superblock is stored in the zoned
mode. It is an on-disk format change but so far there are no
implications for users as the proper mkfs support hasn't been merged
and is waiting for the kernel side to settle.
Until now, the superblocks were derived from the zone index, but zone
size can differ per device. This is changed to be based on fixed
offset values, to make it independent of the device zone size.
The work on that got a bit delayed, we discussed the exact locations
to support potential device sizes and usecases. (Partially delayed
also due to my vacation.) Having that in the same release where the
zoned mode is declared usable is highly desired, there are userspace
projects that need to be updated to recognize the feature. Pushing
that to the next release would make things harder to test"
* tag 'for-5.12-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: move superblock logging zone location
Merge tag 'locking-urgent-2021-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixlets from Ingo Molnar:
"Two minor fixes: one for a Clang warning, the other improves an
ambiguous/confusing kernel log message"
* tag 'locking-urgent-2021-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Address clang -Wformat warning printing for %hd
lockdep: Add a missing initialization hint to the "INFO: Trying to register non-static key" message
Merge tag 'x86_urgent_for_v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the vDSO exception handling return path to disable interrupts
again.
- A fix for the CE collector to return the proper return values to its
callers which are used to convey what the collector has done with the
error address.
* tag 'x86_urgent_for_v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Correct exc_general_protection() and math_error() return paths
RAS/CEC: Correct ce_add_elem()'s returned values
Chris Packham [Mon, 29 Mar 2021 01:52:04 +0000 (14:52 +1300)]
i2c: mpc: make interrupt mandatory and remove polling code
All the in-tree dts files that use one of the compatible strings from
i2c-mpc.c provide an interrupt property. By making this mandatory we
can simplify the code.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Chris Packham [Mon, 29 Mar 2021 01:52:03 +0000 (14:52 +1300)]
i2c: mpc: Make use of i2c_recover_bus()
Move the existing calls of mpc_i2c_fixup() to a recovery function
registered via bus_recovery_info. This makes it more obvious that
recovery is supported and allows for a future where recovery is
triggered by the i2c core.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Chris Packham [Mon, 29 Mar 2021 01:52:02 +0000 (14:52 +1300)]
dt-bindings: i2c: convert i2c-mpc to json-schema
Convert i2c-mpc to YAML.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Chris Packham [Mon, 29 Mar 2021 01:52:01 +0000 (14:52 +1300)]
dt-bindings: i2c-mpc: Document interrupt property as required
All of the in-tree device-trees that use the one of the compatible
strings from i2c-mpc.c supply an interrupts property. Make this property
mandatory to aid refactoring the driver.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Dmitry Torokhov [Mon, 22 Mar 2021 01:38:32 +0000 (18:38 -0700)]
i2c: ensure timely release of driver-allocated resources
More and more drivers rely on devres to manage their resources, however
if bus' probe() and release() methods are not trivial and control some
of resources as well (for example enable or disable clocks, or attach
device to a power domain), we need to make sure that driver-allocated
resources are released immediately after driver's remove() method
returns, and not postponed until driver core gets around to releasing
resources. To fix that we open a new devres group before calling
driver's probe() and explicitly release it when we return from driver's
remove().
Tested-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Andy Shevchenko [Thu, 8 Apr 2021 11:17:21 +0000 (19:17 +0800)]
i2c: designware: Switch over to i2c_freq_mode_string()
Use generic i2c_freq_mode_string() helper to print chosen bus speed.
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Yicong Yang [Thu, 8 Apr 2021 11:17:18 +0000 (19:17 +0800)]
i2c: core: add api to provide frequency mode strings
Some I2C drivers like Designware and HiSilicon will print the
bus frequency mode information, so add a public one that everyone
can make use of.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Yicong Yang [Thu, 8 Apr 2021 11:17:17 +0000 (19:17 +0800)]
i2c: core: add managed function for adding i2c adapters
Some I2C controller drivers will only unregister the I2C
adapter in their .remove() callback, which can be done
by simply using a managed variant to add the I2C adapter.
So add the managed functions for adding the I2C adapter.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Merge branch 'for-5.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fix from Dennis Zhou:
"This contains a fix for sporadically failing atomic percpu
allocations.
I only caught it recently while I was reviewing a new series [1] and
simultaneously saw reports by btrfs in xfstests [2] and [3].
In v5.9, memcg accounting was extended to percpu done by adding a
second type of chunk. I missed an interaction with the free page float
count used to ensure we can support atomic allocations. If one type of
chunk has no free pages, but the other has enough to satisfy the free
page float requirement, we will not repopulate the free pages for the
former type of chunk. This led to the sporadically failing atomic
allocations"
Heikki Krogerus [Mon, 29 Mar 2021 10:50:46 +0000 (13:50 +0300)]
Input: elantech - Prepare a complete software node for the device
Creating a software node and supplying that for the device
instead of only the device properties in it. A software
node was always created in any case to hold the additional
device properties, so this change does not have any real
effect.
This change makes it possible to remove support for the
problematic "dangling" device properties from i2c subsystem,
i.e. the "properties" member from struct i2c_board_info. The
problems caused by them are not related to this driver.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
The older device property API is going to be removed soon
and that will affect also I2C subystem. Supplying complete
software nodes instead of only the properties in them for
the I2C devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Heikki Krogerus [Mon, 29 Mar 2021 10:50:43 +0000 (13:50 +0300)]
i2c: nvidia-gpu: Constify the software node
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Heikki Krogerus [Mon, 29 Mar 2021 10:50:42 +0000 (13:50 +0300)]
i2c: cht-wc: Constify the software node
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Heikki Krogerus [Mon, 29 Mar 2021 10:50:41 +0000 (13:50 +0300)]
platform/x86: intel_cht_int33fe_microb: Constify the software node
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Heikki Krogerus [Mon, 29 Mar 2021 10:50:40 +0000 (13:50 +0300)]
ARM: s3c: mini2440: Constify the software node
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Heikki Krogerus [Mon, 29 Mar 2021 10:50:39 +0000 (13:50 +0300)]
ARM: pxa: stargate2: Constify the software node
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven fixes, all in drivers.
The hpsa three are the most extensive and the most problematic: it's a
packed structure misalignment that oopses on ia64 but looks like it
would also oops on quite a few non-x86 architectures.
The pm80xx is a regression and the rest are bug fixes for patches in
the misc tree"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST state
scsi: target: iscsi: Fix zero tag inside a trace event
scsi: pm80xx: Fix chip initialization failure
scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs
scsi: ufs: core: Fix task management request completion timeout
scsi: hpsa: Add an assert to prevent __packed reintroduction
scsi: hpsa: Fix boot on ia64 (atomic_t alignment)
scsi: hpsa: Use __packed on individual structs, not header-wide
Merge tag 'powerpc-5.12-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some some more powerpc fixes for 5.12:
- Fix an oops triggered by ptrace when CONFIG_PPC_FPU_REGS=n
- Fix an oops on sigreturn when the VDSO is unmapped on 32-bit
- Fix vdso_wrapper.o not being rebuilt everytime vdso.so is rebuilt
Thanks to Christophe Leroy"
* tag 'powerpc-5.12-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: Make sure vdso_wrapper.o is rebuilt everytime vdso.so is rebuilt
powerpc/signal32: Fix Oops on sigreturn with unmapped VDSO
powerpc/ptrace: Don't return error when getting/setting FP regs without CONFIG_PPC_FPU_REGS
Merge tag 'driver-core-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for 5.12-rc7 to resolve a reported
problem that caused some devices to lockup when booting. It has been
in linux-next with no reported issues"
* tag 'driver-core-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix locking bug in deferred_probe_timeout_work_func()
Merge tag 'usb-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a few small USB and Thunderbolt driver fixes for 5.12-rc7 for
reported issues:
- thunderbolt leaks and off-by-one fix
- cdnsp deque fix
- usbip fixes for syzbot-reported issues
All have been in linux-next with no reported problems"
* tag 'usb-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usbip: synchronize event handler with sysfs code paths
usbip: vudc synchronize sysfs code paths
usbip: stub-dev synchronize sysfs code paths
usbip: add sysfs_lock to synchronize sysfs code paths
thunderbolt: Fix off by one in tb_port_find_retimer()
thunderbolt: Fix a leak in tb_retimer_add()
usb: cdnsp: Fixes issue with dequeuing requests after disabling endpoint
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A mixture of driver and documentation bugfixes for I2C"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: mention Oleksij as maintainer of the binding docs
i2c: exynos5: correct top kerneldoc
i2c: designware: Adjust bus_freq_hz when refuse high speed mode set
i2c: hix5hd2: use the correct HiSilicon copyright
i2c: gpio: update email address in binding docs
i2c: imx: drop me as maintainer of binding docs
i2c: stm32f4: Mundane typo fix
I2C: JZ4780: Fix bug for Ingenic X1000.
i2c: turn recovery error on init to debug
btrfs: zoned: move superblock logging zone location
Moves the location of the superblock logging zones. The new locations of
the logging zones are now determined based on fixed block addresses
instead of on fixed zone numbers.
The old placement method based on fixed zone numbers causes problems when
one needs to inspect a file system image without access to the drive zone
information. In such case, the super block locations cannot be reliably
determined as the zone size is unknown. By locating the superblock logging
zones using fixed addresses, we can scan a dumped file system image without
the zone information since a super block copy will always be present at or
after the fixed known locations.
Introduce the following three pairs of zones containing fixed offset
locations, regardless of the device zone size.
- primary superblock: offset 0B (and the following zone)
- first copy: offset 512G (and the following zone)
- Second copy: offset 4T (4096G, and the following zone)
If a logging zone is outside of the disk capacity, we do not record the
superblock copy.
The first copy position is much larger than for a non-zoned filesystem,
which is at 64M. This is to avoid overlapping with the log zones for
the primary superblock. This higher location is arbitrary but allows
supporting devices with very large zone sizes, plus some space around in
between.
Such large zone size is unrealistic and very unlikely to ever be seen in
real devices. Currently, SMR disks have a zone size of 256MB, and we are
expecting ZNS drives to be in the 1-4GB range, so this limit gives us
room to breathe. For now, we only allow zone sizes up to 8GB. The
maximum zone size that would still fit in the space is 256G.
The fixed location addresses are somewhat arbitrary, with the intent of
maintaining superblock reliability for smaller and larger devices, with
the preference for the latter. For this reason, there are two superblocks
under the first 1T. This should cover use cases for physical devices and
for emulated/device-mapper devices.
The superblock logging zones are reserved for superblock logging and
never used for data or metadata blocks. Note that we only reserve the
two zones per primary/copy actually used for superblock logging. We do
not reserve the ranges of zones possibly containing superblocks with the
largest supported zone size (0-16GB, 512G-528GB, 4096G-4112G).
The zones containing the fixed location offsets used to store
superblocks on a non-zoned volume are also reserved to avoid confusion.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Here's the latest pile of clk driver and clk framework fixes for this
release:
- Two clk framework fixes for a long standing issue in
clk_notifier_{register,unregister}() where we used a pointer that
was for a struct containing a list head when there was no container
struct
- A compile warning fix for socfpga that's good to have
- A double free problem with devm registered fixed factor clks
- One last fix to the Qualcomm camera clk driver to use the right clk
ops so clks don't get stuck and stop working because the firmware
takes them for a ride"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: fixed: fix double free in resource managed fixed-factor clock
clk: fix invalid usage of list cursor in unregister
clk: fix invalid usage of list cursor in register
clk: qcom: camcc: Update the clock ops for the SC7180
clk: socfpga: fix iomem pointer cast on 64-bit
Subsystems affected by this patch series: mm (kasan, gup, pagecache,
and kfence), MAINTAINERS, mailmap, nds32, gcov, ocfs2, ia64, and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS
kfence, x86: fix preemptible warning on KPTI-enabled systems
lib/test_kasan_module.c: suppress unused var warning
kasan: fix conflict with page poisoning
fs: direct-io: fix missing sdio->boundary
ia64: fix user_stack_pointer() for ptrace()
ocfs2: fix deadlock between setattr and dio_end_io_write
gcov: re-fix clang-11+ support
nds32: flush_dcache_page: use page_mapping_file to avoid races with swapoff
mm/gup: check page posion status for coredump.
.mailmap: fix old email addresses
mailmap: update email address for Jordan Crouse
treewide: change my e-mail address, fix my name
MAINTAINERS: update CZ.NIC's Turris information
Merge tag 'io_uring-5.12-2021-04-09' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two minor fixups for the reissue logic, and one for making sure that
unbounded work is canceled on io-wq exit"
* tag 'io_uring-5.12-2021-04-09' of git://git.kernel.dk/linux-block:
io-wq: cancel unbounded works on io-wq destroy
io_uring: fix rw req completion
io_uring: clear F_REISSUE right after getting it
Depending on ARCH_WANT_FRAME_POINTERS causes a recursive dependency
error. ARCH_WANT_FRAME_POINTERS is to be selected by the architecture,
and is not supposed to be overridden by other config options.
Marco Elver [Fri, 9 Apr 2021 20:27:44 +0000 (13:27 -0700)]
kfence, x86: fix preemptible warning on KPTI-enabled systems
On systems with KPTI enabled, we can currently observe the following
warning:
BUG: using smp_processor_id() in preemptible
caller is invalidate_user_asid+0x13/0x50
CPU: 6 PID: 1075 Comm: dmesg Not tainted 5.12.0-rc4-gda4a2b1a5479-kfence_1+ #1
Hardware name: Hewlett-Packard HP Pro 3500 Series/2ABF, BIOS 8.11 10/24/2012
Call Trace:
dump_stack+0x7f/0xad
check_preemption_disabled+0xc8/0xd0
invalidate_user_asid+0x13/0x50
flush_tlb_one_kernel+0x5/0x20
kfence_protect+0x56/0x80
...
While it normally makes sense to require preemption to be off, so that
the expected CPU's TLB is flushed and not another, in our case it really
is best-effort (see comments in kfence_protect_page()).
Avoid the warning by disabling preemption around flush_tlb_one_kernel().
Link: https://lore.kernel.org/lkml/YGIDBAboELGgMgXy@elver.google.com/ Link: https://lkml.kernel.org/r/20210330065737.652669-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jack Qiu [Fri, 9 Apr 2021 20:27:35 +0000 (13:27 -0700)]
fs: direct-io: fix missing sdio->boundary
I encountered a hung task issue, but not a performance one. I run DIO
on a device (need lba continuous, for example open channel ssd), maybe
hungtask in below case:
DIO: Checkpoint:
get addr A(at boundary), merge into BIO,
no submit because boundary missing
flush dirty data(get addr A+1), wait IO(A+1)
writeback timeout, because DIO(A) didn't submit
get addr A+2 fail, because checkpoint is doing
dio_send_cur_page() may clear sdio->boundary, so prevent it from missing
a boundary.
Link: https://lkml.kernel.org/r/20210322042253.38312-1-jack.qiu@huawei.com Fixes: b1058b981272 ("direct-io: submit bio after boundary buffer is added to it") Signed-off-by: Jack Qiu <jack.qiu@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thus above forms ABBA deadlock. The same deadlock was mentioned in
upstream commit 28f5a8a7c033 ("ocfs2: should wait dio before inode lock
in ocfs2_setattr()"). It seems that that commit only removed the
cluster lock (the victim of above dead lock) from the ABBA deadlock
party.
End-user visible effects: Process hang in truncate -> ocfs2_setattr path
and other processes hang at ocfs2_dio_end_io_write path.
This is to fix the deadlock itself. It removes inode_lock() call from
dio completion path to remove the deadlock and add ip_alloc_sem lock in
setattr path to synchronize the inode modifications.
[wen.gang.wang@oracle.com: remove the "had_alloc_lock" as suggested] Link: https://lkml.kernel.org/r/20210402171344.1605-1-wen.gang.wang@oracle.com Link: https://lkml.kernel.org/r/20210331203654.3911-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Desaulniers [Fri, 9 Apr 2021 20:27:26 +0000 (13:27 -0700)]
gcov: re-fix clang-11+ support
LLVM changed the expected function signature for llvm_gcda_emit_function()
in the clang-11 release. Users of clang-11 or newer may have noticed
their kernels producing invalid coverage information:
Fix up the function signatures so calling this function interprets its
parameters correctly and computes the correct cfg checksum. In
particular, in clang-11, the additional checksum is no longer optional.
Mike Rapoport [Fri, 9 Apr 2021 20:27:23 +0000 (13:27 -0700)]
nds32: flush_dcache_page: use page_mapping_file to avoid races with swapoff
Commit cb9f753a3731 ("mm: fix races between swapoff and flush dcache")
updated flush_dcache_page implementations on several architectures to
use page_mapping_file() in order to avoid races between page_mapping()
and swapoff().
This update missed arch/nds32 and there is a possibility of a race
there.
Replace page_mapping() with page_mapping_file() in nds32 implementation
of flush_dcache_page().
Link: https://lkml.kernel.org/r/20210330175126.26500-1-rppt@kernel.org Fixes: cb9f753a3731 ("mm: fix races between swapoff and flush dcache") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Greentime Hu <green.hu@gmail.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aili Yao [Fri, 9 Apr 2021 20:27:19 +0000 (13:27 -0700)]
mm/gup: check page posion status for coredump.
When we do coredump for user process signal, this may be an SIGBUS signal
with BUS_MCEERR_AR or BUS_MCEERR_AO code, which means this signal is
resulted from ECC memory fail like SRAR or SRAO, we expect the memory
recovery work is finished correctly, then the get_dump_page() will not
return the error page as its process pte is set invalid by
memory_failure().
But memory_failure() may fail, and the process's related pte may not be
correctly set invalid, for current code, we will return the poison page,
get it dumped, and then lead to system panic as its in kernel code.
So check the poison status in get_dump_page(), and if TRUE, return NULL.
There maybe other scenario that is also better to check the posion status
and not to panic, so make a wrapper for this check, Thanks to David's
suggestion(<david@redhat.com>).
[akpm@linux-foundation.org: s/0/false/]
[yaoaili@kingsoft.com: is_page_poisoned() arg cannot be null, per Matthew]
Link: https://lkml.kernel.org/r/20210322115233.05e4e82a@alex-virtual-machine Link: https://lkml.kernel.org/r/20210319104437.6f30e80d@alex-virtual-machine Signed-off-by: Aili Yao <yaoaili@kingsoft.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Aili Yao <yaoaili@kingsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'devicetree-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix fw_devlink failure with ".*,nr-gpios" properties
- Doc link reference fixes from Mauro
- Fixes for unaligned FDT handling found on OpenRisc. First, avoid
crash with better error handling when unflattening an unaligned FDT.
Second, fix memory allocations for FDTs to ensure alignment.
* tag 'devicetree-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: property: fw_devlink: do not link ".*,nr-gpios"
dt-bindings:iio:adc: update motorola,cpcap-adc.yaml reference
dt-bindings: fix references for iio-bindings.txt
dt-bindings: don't use ../dir for doc references
of: unittest: overlay: ensure proper alignment of copied FDT
of: properly check for error returned by fdt_get_name()
Merge tag 'drm-fixes-2021-04-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Was relatively quiet this week, but still a few pulls came in, pretty
much small fixes across the board, a couple of regression fixes in the
amdgpu/radeon code, msm has a few minor fixes across the board, a
panel regression fix also.
xen:
- Fix use-after-free in xen
- minor duplicate defintion cleanup
vc4:
- Reduce fifo threshold on hvs4 to fix a fifo full error
- minor redunantant assignment cleanup
panel:
- Disable TE support for Droid4 and N950"
* tag 'drm-fixes-2021-04-10' of git://anongit.freedesktop.org/drm/drm:
drm/vc4: crtc: Reduce PV fifo threshold on hvs4
drm/vc4: plane: Remove redundant assignment
drm/amdgpu/smu7: fix CAC setting on TOPAZ
drm/radeon: Fix size overflow
drm/amdgpu: Fix size overflow
drm/i915: Fix invalid access to ACPI _DSM objects
drm/amd/display: Add missing mask for DCN3
drm/panel: panel-dsi-cm: disable TE for now
drm/msm/disp/dpu1: program 3d_merge only if block is attached
drm/msm: a6xx: fix version check for the A650 SQE microcode
drm/msm: Fix a5xx/a6xx timestamps
drm/msm: Fix removal of valid error case when checking speed_bin
drm/msm: Set drvdata to NULL when msm_drm_init() fails
drivers: gpu: drm: xen_drm_front_drm_info is declared twice
gpu/xen: Fix a use after free in xen_drm_drv_init
Paolo Abeni [Fri, 9 Apr 2021 15:24:17 +0000 (17:24 +0200)]
net: fix hangup on napi_disable for threaded napi
napi_disable() is subject to an hangup, when the threaded
mode is enabled and the napi is under heavy traffic.
If the relevant napi has been scheduled and the napi_disable()
kicks in before the next napi_threaded_wait() completes - so
that the latter quits due to the napi_disable_pending() condition,
the existing code leaves the NAPI_STATE_SCHED bit set and the
napi_disable() loop waiting for such bit will hang.
This patch addresses the issue by dropping the NAPI_STATE_DISABLE
bit test in napi_thread_wait(). The later napi_threaded_poll()
iteration will take care of clearing the NAPI_STATE_SCHED.
This also addresses a related problem reported by Jakub:
before this patch a napi_disable()/napi_enable() pair killed
the napi thread, effectively disabling the threaded mode.
On the patched kernel napi_disable() simply stops scheduling
the relevant thread.
v1 -> v2:
- let the main napi_thread_poll() loop clear the SCHED bit
Sven Van Asbroeck [Fri, 9 Apr 2021 00:39:04 +0000 (20:39 -0400)]
lan743x: fix ethernet frame cutoff issue
The ethernet frame length is calculated incorrectly. Depending on
the value of RX_HEAD_PADDING, this may result in ethernet frames
that are too short (cut off at the end), or too long (garbage added
to the end).
Fix by calculating the ethernet frame length correctly. For added
clarity, use the ETH_FCS_LEN constant in the calculation.
Many thanks to Heiner Kallweit for suggesting this solution.
of: property: fw_devlink: do not link ".*,nr-gpios"
[<vendor>,]nr-gpios property is used by some GPIO drivers[0] to indicate
the number of GPIOs present on a system, not define a GPIO. nr-gpios is
not configured by #gpio-cells and can't be parsed along with other
"*-gpios" properties.
nr-gpios without the "<vendor>," prefix is not allowed by the DT
spec[1], so only add exception for the ",nr-gpios" suffix and let the
error message continue being printed for non-compliant implementations.
[0] nr-gpios is referenced in Documentation/devicetree/bindings/gpio:
- gpio-adnp.txt
- gpio-xgene-sb.txt
- gpio-xlp.txt
- snps,dw-apb-gpio.yaml
projects / users / jedix / linux-maple.git / log