net: dsa: lan9303: use ethtool_puts() for lan9303_get_strings()
This pattern of strncpy with some pointer arithmetic setting fixed-sized
intervals with string literal data is a bit weird so let's use
ethtool_puts() as this has more obvious behavior and is less-error
prone.
Nicely, we also get to drop a usage of the now deprecated strncpy() [1].
====================
Implement reset reason mechanism to detect
From: Jason Xing <kernelxing@tencent.com>
In production, there are so many cases about why the RST skb is sent but
we don't have a very convenient/fast method to detect the exact underlying
reasons.
RST is implemented in two kinds: passive kind (like tcp_v4_send_reset())
and active kind (like tcp_send_active_reset()). The former can be traced
carefully 1) in TCP, with the help of drop reasons, which is based on
Eric's idea[1], 2) in MPTCP, with the help of reset options defined in
RFC 8684. The latter is relatively independent, which should be
implemented on our own, such as active reset reasons which can not be
replace by skb drop reason or something like this.
In this series, I focus on the fundamental implement mostly about how
the rstreason mechanism works and give the detailed passive part as an
example, not including the active reset part. In future, we can go
further and refine those NOT_SPECIFIED reasons.
Here are some examples when tracing:
<idle>-0 [002] ..s1. 1830.262425: tcp_send_reset: skbaddr=x
skaddr=x src=x dest=x state=x reason=NOT_SPECIFIED
<idle>-0 [002] ..s1. 1830.262425: tcp_send_reset: skbaddr=x
skaddr=x src=x dest=x state=x reason=NO_SOCKET
Jason Xing [Thu, 25 Apr 2024 03:13:40 +0000 (11:13 +0800)]
rstreason: make it work in trace world
At last, we should let it work by introducing this reset reason in
trace world.
One of the possible expected outputs is:
... tcp_send_reset: skbaddr=xxx skaddr=xxx src=xxx dest=xxx
state=TCP_ESTABLISHED reason=NOT_SPECIFIED
Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason Xing [Thu, 25 Apr 2024 03:13:39 +0000 (11:13 +0800)]
mptcp: introducing a helper into active reset logic
Since we have mapped every mptcp reset reason definition in enum
sk_rst_reason, introducing a new helper can cover some missing places
where we have already set the subflow->reset_reason.
Note: using SK_RST_REASON_NOT_SPECIFIED is the same as
SK_RST_REASON_MPTCP_RST_EUNSPEC. They are both unknown. So we can convert
it directly.
Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason Xing [Thu, 25 Apr 2024 03:13:38 +0000 (11:13 +0800)]
mptcp: support rstreason for passive reset
It relies on what reset options in the skb are as rfc8684 says. Reusing
this logic can save us much energy. This patch replaces most of the prior
NOT_SPECIFIED reasons.
Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason Xing [Thu, 25 Apr 2024 03:13:37 +0000 (11:13 +0800)]
tcp: support rstreason for passive reset
Reuse the dropreason logic to show the exact reason of tcp reset,
so we can finally display the corresponding item in enum sk_reset_reason
instead of reinventing new reset reasons. This patch replaces all
the prior NOT_SPECIFIED reasons.
Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason Xing [Thu, 25 Apr 2024 03:13:34 +0000 (11:13 +0800)]
net: introduce rstreason to detect why the RST is sent
Add a new standalone file for the easy future extension to support
both active reset and passive reset in the TCP/DCCP/MPTCP protocols.
This patch only does the preparations for reset reason mechanism,
nothing else changes.
The reset reasons are divided into three parts:
1) reuse drop reasons for passive reset in TCP
2) our own independent reasons which aren't relying on other reasons at all
3) reuse MP_TCPRST option for MPTCP
The benefits of a standalone reset reason are listed here:
1) it can cover more than one case, such as reset reasons in MPTCP,
active reset reasons.
2) people can easily/fastly understand and maintain this mechanism.
3) we get unified format of output with prefix stripped.
4) more new reset reasons are on the way
...
I will implement the basic codes of active/passive reset reason in
those three protocols, which are not complete for this moment. For
passive reset part in TCP, I only introduce the NO_SOCKET common case
which could be set as an example.
After this series applied, it will have the ability to open a new
gate to let other people contribute more reasons into it :)
Signed-off-by: Jason Xing <kernelxing@tencent.com> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
igc: Add Tx hardware timestamp request for AF_XDP zero-copy packet
This patch adds support to per-packet Tx hardware timestamp request to
AF_XDP zero-copy packet via XDP Tx metadata framework. Please note that
user needs to enable Tx HW timestamp capability via igc_ioctl() with
SIOCSHWTSTAMP cmd before sending xsk Tx hardware timestamp request.
Same as implementation in RX timestamp XDP hints kfunc metadata, Timer 0
(adjustable clock) is used in xsk Tx hardware timestamp. i225/i226 have
four sets of timestamping registers. *skb and *xsk_tx_buffer pointers
are used to indicate whether the timestamping register is already occupied.
Furthermore, a boolean variable named xsk_pending_ts is used to hold the
transmit completion until the tx hardware timestamp is ready. This is
because, for i225/i226, the timestamp notification event comes some time
after the transmit completion event. The driver will retrigger hardware irq
to clean the packet after retrieve the tx hardware timestamp.
Besides, xsk_meta is added into struct igc_tx_timestamp_request as a hook
to the metadata location of the transmit packet. When the Tx timestamp
interrupt is fired, the interrupt handler will copy the value of Tx hwts
into metadata location via xsk_tx_metadata_complete().
This patch is tested with tools/testing/selftests/bpf/xdp_hw_metadata
on Intel ADL-S platform. Below are the test steps and results.
Test Step 1: Run xdp_hw_metadata app
./xdp_hw_metadata <iface> > /dev/shm/result.log
Test Step 3: Run ptp4l and phc2sys for time synchronization
Test Step 4: Generate UDP packets with 1ms interval for 10s
trafgen --dev <iface> '{eth(da=<addr>), udp(dp=9091)}' -t 1ms -n 10000
Test Step 5: Rerun Step 1-3 with 10s iperf3 as background traffic
Test Step 6: Rerun Step 1-4 with 10s iperf3 as background traffic
Based on iperf3 results below, the impact of holding tx completion to
throughput is not observable.
Result of last UDP packet (no. 10000) in Step 4:
poll: 1 (0) skip=99 fail=0 redir=10000
xsk_ring_cons__peek: 1
0x5640a37972d0: rx_desc[9999]->addr=f2110 addr=f2110 comp_addr=f2110 EoP
rx_hash: 0x2049BE1D with RSS type:0x1
HW RX-time: 1679819246792971268 (sec:1679819246.7930) delta to User RX-time sec:0.0000 (14.990 usec)
XDP RX-time: 1679819246792981987 (sec:1679819246.7930) delta to User RX-time sec:0.0000 (4.271 usec)
No rx_vlan_tci or rx_vlan_proto, err=-95
0x5640a37972d0: ping-pong with csum=ab19 (want 315b) csum_start=34 csum_offset=6
0x5640a37972d0: complete tx idx=9999 addr=f010
HW TX-complete-time: 1679819246793036971 (sec:1679819246.7930) delta to User TX-complete-time sec:0.0001 (77.656 usec)
XDP RX-time: 1679819246792981987 (sec:1679819246.7930) delta to User TX-complete-time sec:0.0001 (132.640 usec)
HW RX-time: 1679819246792971268 (sec:1679819246.7930) delta to HW TX-complete-time sec:0.0001 (65.703 usec)
0x5640a37972d0: complete rx idx=10127 addr=f2110
Result of iperf3 without tx hwts request in step 5:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.74 GBytes 2.36 Gbits/sec 0 sender
[ 5] 0.00-10.05 sec 2.74 GBytes 2.34 Gbits/sec receiver
Result of iperf3 running parallel with trafgen command in step 6:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.74 GBytes 2.36 Gbits/sec 0 sender
[ 5] 0.00-10.04 sec 2.74 GBytes 2.34 Gbits/sec receiver
Co-developed-by: Lai Peter Jun Ann <jun.ann.lai@intel.com> Signed-off-by: Lai Peter Jun Ann <jun.ann.lai@intel.com> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240424210256.3440903-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patchset aims at introducing very basic initial infrastructure
for virtio_net testing, namely it focuses on virtio feature testing.
The first patch adds support for debugfs for virtio devices, allowing
user to filter features to pretend to be driver that is not capable
of the filtered feature.
Leverage that in the last patch that lays ground for virtio_net
selftests testing, including very basic F_MAC feature test.
To run this, do:
$ make -C tools/testing/selftests/ TARGETS=drivers/net/virtio_net/ run_tests
It is assumed, as with lot of other selftests in the net group,
that there are netdevices connected back-to-back. In this case,
two virtio_net devices connected back to back. If you use "tap" qemu
netdevice type, to configure this loop on a hypervisor, one may use
this script:
DEV1="$1"
DEV2="$2"
sudo tc qdisc add dev $DEV1 clsact
sudo tc qdisc add dev $DEV2 clsact
sudo tc filter add dev $DEV1 ingress protocol all pref 1 matchall action mirred egress redirect dev $DEV2
sudo tc filter add dev $DEV2 ingress protocol all pref 1 matchall action mirred egress redirect dev $DEV1
sudo ip link set $DEV1 up
sudo ip link set $DEV2 up
Another possibility is to use virtme-ng like this:
$ vng --network=loop
or directly:
$ vng --network=loop -- make -C tools/testing/selftests/ TARGETS=drivers/net/virtio_net/ run_tests
"loop" network type will take care of creating two "hubport" qemu netdevs
putting them into a single hub.
To do it manually with qemu, pass following command line options:
-nic hubport,hubid=1,id=nd0,model=virtio-net-pci
-nic hubport,hubid=1,id=nd1,model=virtio-net-pci
====================
The existing setup_wait*() helper family check the status of the
interface to be up. Introduce wait_for_dev() to wait for the netdevice
to appear, for example after test script does manual device bind.
Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
selftests: forwarding: add ability to assemble NETIFS array by driver name
Allow driver tests to work without specifying the netdevice names.
Introduce a possibility to search for available netdevices according to
set driver name. Allow test to specify the name by setting
NETIF_FIND_DRIVER variable.
Note that user overrides this either by passing netdevice names on the
command line or by declaring NETIFS array in custom forwarding.config
configuration file.
Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
virtio: add debugfs infrastructure to allow to debug virtio features
Currently there is no way for user to set what features the driver
should obey or not, it is hard wired in the code.
In order to be able to debug the device behavior in case some feature is
disabled, introduce a debugfs infrastructure with couple of files
allowing user to see what features the device advertises and
to set filter for features used by driver.
test: hsr: Extract version agnostic information from ping command output
Current code checks if ping command output match hardcoded pattern:
"10 packets transmitted, 10 received, 0% packet loss,".
Such approach will work only from one ping program version (for which
this test has been originally written).
This patch address problem when ping with different summary output
like "10 packets transmitted, 10 packets received, 0% packet" is
used to run this test - for example one from busybox (as the test
system runs in QEMU with rootfs created with buildroot).
The fix is to modify output of ping command to be agnostic to ping
version used on the platform.
Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some of the code already present in the hsr_ping.sh test program can be
moved to a separate script file, so it can be reused by other HSR
functionality (like HSR-SAN) tests.
Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce RedBox support (HSR-SAN to be more precise) for HSR networks.
Following traffic reduction optimizations have been implemented:
- Do not send HSR supervisory frames to Port C (interlink)
- Do not forward to HSR ring frames addressed to Port C
- Do not forward to Port C frames from HSR ring
- Do not send duplicate HSR frame to HSR ring when destination is Port C
The corresponding patch to modify iptable2 sources has already been sent:
https://lore.kernel.org/netdev/20240308145729.490863-1-lukma@denx.de/T/
Testing procedure (veth and netns):
-----------------------------------
One shall run:
linux-vanila/tools/testing/selftests/net/hsr/hsr_redbox.sh
(Detailed description of the setup one can find in the test
script file).
Testing procedure (real hardware):
----------------------------------
The EVB-KSZ9477 has been used for testing on net-next branch
(SHA1: 5fc68320c1fb3c7d456ddcae0b4757326a043e6f).
Ports 4/5 were used for SW managed HSR (hsr1) as first hsr0 for ports 1/2
(with HW offloading for ksz9477) was created. Port 3 has been used as
interlink port (single USB-ETH dongle).
Configuration - RedBox (EVB-KSZ9477):
if link set lan1 down;ip link set lan2 down
ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1
ip link add name hsr1 type hsr slave1 lan4 slave2 lan5 interlink lan3 supervision 45 version 1
ip link set lan4 up;ip link set lan5 up
ip link set lan3 up
ip addr add 192.168.0.11/24 dev hsr1
ip link set hsr1 up
Configuration - DAN-H (EVB-KSZ9477):
ip link set lan1 down;ip link set lan2 down
ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1
ip link add name hsr1 type hsr slave1 lan4 slave2 lan5 supervision 45 version 1
ip link set lan4 up;ip link set lan5 up
ip addr add 192.168.0.12/24 dev hsr1
ip link set hsr1 up
This approach uses only SW based HSR devices (hsr1).
This happens when TC does a mirred egress redirect from the root qdisc of
device A to the root qdisc of device B. As long as these two locks aren't
protecting the same qdisc, they can be acquired in chain: add a per-qdisc
lockdep key to silence false warnings.
This dynamic key should safely replace the static key we have in sch_htb:
it was added to allow enqueueing to the device "direct qdisc" while still
holding the qdisc root lock.
v2: don't use static keys anymore in HTB direct qdiscs (thanks Eric Dumazet)
Jakub Kicinski [Fri, 26 Apr 2024 03:00:54 +0000 (20:00 -0700)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
net: intel: start The Great Code Dedup + Page Pool for iavf
Alexander Lobakin says:
Here's a two-shot: introduce {,Intel} Ethernet common library (libeth and
libie) and switch iavf to Page Pool. Details are in the commit messages;
here's a summary:
Not a secret there's a ton of code duplication between two and more Intel
ethernet modules. Before introducing new changes, which would need to be
copied over again, start decoupling the already existing duplicate
functionality into a new module, which will be shared between several
Intel Ethernet drivers. The first name that came to my mind was
"libie" -- "Intel Ethernet common library". Also this sounds like
"lovelie" (-> one word, no "lib I E" pls) and can be expanded as
"lib Internet Explorer" :P
The "generic", pure-software part is placed separately, so that it can be
easily reused in any driver by any vendor without linking to the Intel
pre-200G guts. In a few words, it's something any modern driver does the
same way, but nobody moved it level up (yet).
The series is only the beginning. From now on, adding every new feature
or doing any good driver refactoring will remove much more lines than add
for quite some time. There's a basic roadmap with some deduplications
planned already, not speaking of that touching every line now asks:
"can I share this?". The final destination is very ambitious: have only
one unified driver for at least i40e, ice, iavf, and idpf with a struct
ops for each generation. That's never gonna happen, right? But you still
can at least try.
PP conversion for iavf lands within the same series as these two are tied
closely. libie will support Page Pool model only, so that a driver can't
use much of the lib until it's converted. iavf is only the example, the
rest will eventually be converted soon on a per-driver basis. That is
when it gets really interesting. Stay tech.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
MAINTAINERS: add entry for libeth and libie
iavf: switch to Page Pool
iavf: pack iavf_ring more efficiently
libeth: add Rx buffer management
page_pool: add DMA-sync-for-CPU inline helper
page_pool: constify some read-only function arguments
slab: introduce kvmalloc_array_node() and kvcalloc_node()
iavf: drop page splitting and recycling
iavf: kill "legacy-rx" for good
net: intel: introduce {, Intel} Ethernet common library
====================
====================
net: lan966x: flower: validate control flags
This series adds flower control flags validation to the
lan966x driver, and changes it from assuming that it handles
all control flags, to instead reject rules if they have
masked any unknown/unsupported control flags.
====================
net: sparx5: flower: validate control flags
This series adds flower control flags validation to the
sparx5 driver, and changes it from assuming that it handles
all control flags, to instead reject rules if they have
masked any unknown/unsupported control flags. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Tested-by: Daniel Machon <daniel.machon@microchip.com>
v1: https://lore.kernel.org/netdev/20240423102728.228765-1-ast@fiberby.net/
====================
net: sparx5: flower: only do lookup if fragment flags are set
The fragment lookup should only be performed, when
at least one of the fragment flags are set.
This change was deliberately not included in commit 68aba00483c7 ("net: sparx5: flower: fix fragment flags handling")
as it's only needed for future proffing the code, since
"mask" is currently only set in conjunction with the
fragment flags.
(The 3rd flag FLOW_DIS_ENCAPSULATION is only used with "key")
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Tested-by: Daniel Machon <daniel.machon@microchip.com> Link: https://lore.kernel.org/r/20240424121632.459022-2-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_device from the private struct by converting it
into a pointer. Then use the leverage the new alloc_netdev_dummy()
helper to allocate and initialize dummy devices.
Hayes Wang [Wed, 24 Apr 2024 08:45:32 +0000 (16:45 +0800)]
r8152: replace dev_info with dev_dbg for loading firmware
Someone complains the message appears continuously. This occurs
because the device is woken from UPS mode, and the driver re-loads
the firmware.
When the device enters runtime suspend and cable is unplugged, the
device would enter UPS mode. If the runtime resume occurs, and the
device is woken from UPS mode, the driver has to re-load the firmware
and causes the message. If someone wakes the device continuously, the
message would be shown continuously, too. Use dev_dbg to avoid it.
Note that, the function could be called before register_netdev(), so I
don't use netif_info() or netif_dbg().
Daniel Golle [Tue, 23 Apr 2024 09:00:25 +0000 (11:00 +0200)]
net: sfp: add quirk for ATS SFP-GE-T 1000Base-TX module
Add quirk for ATS SFP-GE-T 1000Base-TX module.
This copper module comes with broken TX_FAULT indicator which must be
ignored for it to work.
Co-authored-by: Josef Schlehofer <pepe.schlehofer@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[ rebased on top of net-next ] Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20240423090025.29231-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marek Behún [Tue, 23 Apr 2024 08:50:39 +0000 (10:50 +0200)]
net: sfp: enhance quirk for Fibrestore 2.5G copper SFP module
Enhance the quirk for Fibrestore 2.5G copper SFP module. The original
commit e27aca3760c0 ("net: sfp: add quirk for FS's 2.5G copper SFP")
introducing the quirk says that the PHY is inaccessible, but that is
not true.
The module uses Rollball protocol to talk to the PHY, and needs a 4
second wait before probing it, same as FS 10G module.
The PHY inside the module is Realtek RTL8221B-VB-CG PHY. The realtek
driver recently gained support to set it up via clause 45 accesses.
Marek Behún [Tue, 23 Apr 2024 08:50:38 +0000 (10:50 +0200)]
net: sfp: update comment for FS SFP-10G-T quirk
Update the comment for the Fibrestore SFP-10G-T module: since commit e9301af385e7 ("net: sfp: fix PHY discovery for FS SFP-10G-T module")
we also do a 4 second wait before probing the PHY.
Fixes: e9301af385e7 ("net: sfp: fix PHY discovery for FS SFP-10G-T module") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240423085039.26957-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240423205408.39632-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/unix/garbage.c 1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
drivers/net/ethernet/ti/icssg/icssg_prueth.c
drivers/net/ethernet/ti/icssg/icssg_common.c 4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()") e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file")
Jakub Kicinski [Thu, 25 Apr 2024 18:49:35 +0000 (11:49 -0700)]
Merge tag 'wireless-next-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The second "new features" pull request for v6.10 with changes both in
stack and in drivers. This time the pull request is rather small and
nothing special standing out except maybe that we have several
kernel-doc fixes. Great to see that we are getting warning free
wireless code (until new warnings are added).
Major changes:
rtl8xxxu:
* enable Management Frame Protection (MFP) support
rtw88:
* disable unsupported interface type of mesh point for all chips, and only
support station mode for SDIO chips.
* tag 'wireless-next-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (63 commits)
wifi: mac80211: handle link ID during management Tx
wifi: mac80211: handle sdata->u.ap.active flag with MLO
wifi: cfg80211: add return docs for regulatory functions
wifi: cfg80211: make some regulatory functions void
wifi: mac80211: add return docs for sta_info_flush()
wifi: mac80211: keep mac80211 consistent on link activation failure
wifi: mac80211: simplify ieee80211_assign_link_chanctx()
wifi: mac80211: reserve chanctx during find
wifi: cfg80211: fix cfg80211 function kernel-doc
wifi: mac80211_hwsim: Use wider regulatory for custom for 6GHz tests
wifi: iwlwifi: mvm: Don't allow EMLSR when the RSSI is low
wifi: iwlwifi: mvm: disable EMLSR when we suspend with wowlan
wifi: iwlwifi: mvm: get periodic statistics in EMLSR
wifi: iwlwifi: mvm: don't recompute EMLSR mode in can_activate_links
wifi: iwlwifi: mvm: implement EMLSR prevention mechanism.
wifi: iwlwifi: mvm: exit EMLSR upon missed beacon
wifi: iwlwifi: mvm: init vif works only once
wifi: iwlwifi: mvm: Add helper functions to update EMLSR status
wifi: iwlwifi: mvm: Implement new link selection algorithm
wifi: iwlwifi: mvm: move EMLSR/links code
...
====================
b53 is now the only remaining driver that uses both PHYLIB's adjust_link
and PHYLINK's mac_ops callbacks, convert entirely to PHYLINK.
====================
net: dsa: b53: Call b53_eee_init() from b53_mac_link_up()
And make sure this is done for the MLO_AN_PHY case, where it actually
makes sense, contrary to b53_adjust_link() which only did it for
fixed-PHY configurations where it does not make sense.
net: dsa: b53: Configure RGMII for 531x5 and MII for 5325
Call b53_adjust_531x5_rgmii() and b53_adjust_5325_mii() from
b53_phylink_mac_config() when we have a fixed PHY in preparation for removing
b53_adjust_link(). Also move b53_adjust_63xx_rgmii() to
b53_phylink_mac_config() where it logically belongs.
net: dsa: b53: Force flow control for BCM5301X CPU port(s)
Just like what b53_adjust_link() does, force flow control for the
BCM5301X CPU port(s) by forcing rx_pause and tx_pause in
b53_phylink_mac_link_up(). Preparatory step for getting rid of
b53_adjust_link().
Takes care of doing the 5325 switch series specific MII programming and
is called from b53_adjust_link() to allow the future removal of
b53_adjust_link().
Takes care of doing the 531x5 switch series specific RGMII programming
and is called from b53_adjust_link() to allow the future removal of
b53_adjust_link().
Merge tag 'net-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Nothing major, regression fixes are mostly in drivers, two more of
those are flowing towards us thru various trees. I wish some of the
changes went into -rc5, we'll try to keep an eye on frequency of PRs
from sub-trees.
Also disproportional number of fixes for bugs added in v6.4, strange
coincidence.
Current release - regressions:
- igc: fix LED-related deadlock on driver unbind
- wifi: mac80211: small fixes to recent clean up of the connection
process
- Revert "wifi: iwlwifi: bump FW API to 90 for BZ/SC devices", kernel
doesn't have all the code to deal with that version, yet
- Bluetooth:
- set power_ctrl_enabled on NULL returned by gpiod_get_optional()
- qca: fix invalid device address check, again
- Bluetooth:
- lots of fixes for the command submission rework from v6.4
- qca: fix NULL-deref on non-serdev suspend
Misc:
- tools: ynl: don't ignore errors in NLMSG_DONE messages"
* tag 'net-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().
net: b44: set pause params only when interface is up
tls: fix lockless read of strp->msg_ready in ->poll
dpll: fix dpll_pin_on_pin_register() for multiple parent pins
net: ravb: Fix registered interrupt names
octeontx2-af: fix the double free in rvu_npc_freemem()
net: ethernet: ti: am65-cpts: Fix PTPv1 message type on TX packets
ice: fix LAG and VF lock dependency in ice_reset_vf()
iavf: Fix TC config comparison with existing adapter TC config
i40e: Report MFS in decimal base instead of hex
i40e: Do not use WQ_MEM_RECLAIM flag for workqueue
net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()
net/mlx5e: Advertise mlx5 ethernet driver updates sk_buff md_dst for MACsec
macsec: Detect if Rx skb is macsec-related for offloading devices that update md_dst
ethernet: Add helper for assigning packet type when dest address does not match device address
macsec: Enable devices to advertise whether they update sk_buff md_dst during offloads
net: phy: dp83869: Fix MII mode failure
netfilter: nf_tables: honor table dormant flag from netdev release event path
eth: bnxt: fix counting packets discarded due to OOM and netpoll
igc: Fix LED-related deadlock on driver unbind
...
Merge tag 'nfsd-6.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Revert some backchannel fixes that went into v6.9-rc
* tag 'nfsd-6.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "NFSD: Convert the callback workqueue to use delayed_work"
Revert "NFSD: Reschedule CB operations when backchannel rpc_clnt is shut down"
Merge tag 'for-linus-2024042501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- A couple of i2c-hid fixes (Kenny Levinsen & Nam Cao)
- A config issue with mcp-2221 when CONFIG_IIO is not enabled
(Abdelrahman Morsy)
- A dev_err fix in intel-ish-hid (Zhang Lixu)
- A couple of mouse fixes for both nintendo and Logitech-dj (Nuno
Pereira and Yaraslau Furman)
- I'm changing my main kernel email address as it's way simpler for me
than the Red Hat one (Benjamin Tissoires)
* tag 'for-linus-2024042501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: mcp-2221: cancel delayed_work only when CONFIG_IIO is enabled
HID: logitech-dj: allow mice to use all types of reports
HID: i2c-hid: Revert to await reset ACK before reading report descriptor
HID: nintendo: Fix N64 controller being identified as mouse
MAINTAINERS: update Benjamin's email address
HID: intel-ish-hid: ipc: Fix dev_err usage with uninitialized dev->devc
HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up
Jakub Kicinski [Thu, 25 Apr 2024 15:46:53 +0000 (08:46 -0700)]
Merge tag 'nf-24-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains two Netfilter/IPVS fixes for net:
Patch #1 fixes SCTP checksumming for IPVS with gso packets,
from Ismael Luceno.
Patch #2 honor dormant flag from netdev event path to fix a possible
double hook unregistration.
* tag 'nf-24-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: honor table dormant flag from netdev release event path
ipvs: Fix checksumming on GSO of SCTP packets
====================
Peter Münster [Wed, 24 Apr 2024 13:51:52 +0000 (15:51 +0200)]
net: b44: set pause params only when interface is up
b44_free_rings() accesses b44::rx_buffers (and ::tx_buffers)
unconditionally, but b44::rx_buffers is only valid when the
device is up (they get allocated in b44_open(), and deallocated
again in b44_close()), any other time these are just a NULL pointers.
So if you try to change the pause params while the network interface
is disabled/administratively down, everything explodes (which likely
netifd tries to do).
Link: https://github.com/openwrt/openwrt/issues/13789 Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2) Cc: stable@vger.kernel.org Reported-by: Peter Münster <pm@a16n.net> Suggested-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Vaclav Svoboda <svoboda@neng.cz> Tested-by: Peter Münster <pm@a16n.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Peter Münster <pm@a16n.net> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/87y192oolj.fsf@a16n.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tls: fix lockless read of strp->msg_ready in ->poll
tls_sk_poll is called without locking the socket, and needs to read
strp->msg_ready (via tls_strp_msg_ready). Convert msg_ready to a bool
and use READ_ONCE/WRITE_ONCE where needed. The remaining reads are
only performed when the socket is locked.
dpll: fix dpll_pin_on_pin_register() for multiple parent pins
In scenario where pin is registered with multiple parent pins via
dpll_pin_on_pin_register(..), all belonging to the same dpll device.
A second call to dpll_pin_on_pin_unregister(..) would cause a call trace,
as it tries to use already released registration resources (due to fix
introduced in b446631f355e). In this scenario pin was registered twice,
so resources are not yet expected to be release until each registered
pin/pin pair is unregistered.
Currently, the following crash/call trace is produced when ice driver is
removed on the system with installed E810T NIC which includes dpll device:
Fix by adding a parent pointer as a cookie when creating a registration,
also when searching for it. For the regular pins pass NULL, this allows to
create separated registration for each parent the pin is registered with.
As interrupts are now requested from ravb_probe(), before calling
register_netdev(), ndev->name still contains the template "eth%d",
leading to funny names in /proc/interrupts. E.g. on R-Car E3:
Jason Reeder [Wed, 24 Apr 2024 07:16:26 +0000 (12:46 +0530)]
net: ethernet: ti: am65-cpts: Fix PTPv1 message type on TX packets
The CPTS, by design, captures the messageType (Sync, Delay_Req, etc.)
field from the second nibble of the PTP header which is defined in the
PTPv2 (1588-2008) specification. In the PTPv1 (1588-2002) specification
the first two bytes of the PTP header are defined as the versionType
which is always 0x0001. This means that any PTPv1 packets that are
tagged for TX timestamping by the CPTS will have their messageType set
to 0x0 which corresponds to a Sync message type. This causes issues
when a PTPv1 stack is expecting a Delay_Req (messageType: 0x1)
timestamp that never appears.
Fix this by checking if the ptp_class of the timestamped TX packet is
PTP_CLASS_V1 and then matching the PTP sequence ID to the stored
sequence ID in the skb->cb data structure. If the sequence IDs match
and the packet is of type PTPv1 then there is a chance that the
messageType has been incorrectly stored by the CPTS so overwrite the
messageType stored by the CPTS with the messageType from the skb->cb
data structure. This allows the PTPv1 stack to receive TX timestamps
for Delay_Req packets which are necessary to lock onto a PTP Leader.
Signed-off-by: Jason Reeder <jreeder@ti.com> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Tested-by: Ed Trexel <ed.trexel@hp.com> Fixes: f6bd59526ca5 ("net: ethernet: ti: introduce am654 common platform time sync driver") Link: https://lore.kernel.org/r/20240424071626.32558-1-r-gunasekaran@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Fix isolation of broadcast traffic and unmatched unicast traffic with MACsec offload
Some device drivers support devices that enable them to annotate whether a
Rx skb refers to a packet that was processed by the MACsec offloading
functionality of the device. Logic in the Rx handling for MACsec offload
does not utilize this information to preemptively avoid forwarding to the
macsec netdev currently. Because of this, things like multicast messages or
unicast messages with an unmatched destination address such as ARP requests
are forwarded to the macsec netdev whether the message received was MACsec
encrypted or not. The goal of this patch series is to improve the Rx
handling for MACsec offload for devices capable of annotating skbs received
that were decrypted by the NIC offload for MACsec.
Here is a summary of the issue that occurs with the existing logic today.
* The current design of the MACsec offload handling path tries to use
"best guess" mechanisms for determining whether a packet associated
with the currently handled skb in the datapath was processed via HW
offload
* The best guess mechanism uses the following heuristic logic (in order of
precedence)
- Check if header destination MAC address matches MACsec netdev MAC
address -> forward to MACsec port
- Check if packet is multicast traffic -> forward to MACsec port
- MACsec security channel was able to be looked up from skb offload
context (mlx5 only) -> forward to MACsec port
* Problem: plaintext traffic can potentially solicit a MACsec encrypted
response from the offload device
- Core aspect of MACsec is that it identifies unauthorized LAN connections
and excludes them from communication
+ This behavior can be seen when not enabling offload for MACsec
- The offload behavior violates this principle in MACsec
I believe this behavior is a security bug since applications utilizing
MACsec could be exploited using this behavior, and the correct way to
resolve this is by having the hardware correctly indicate whether MACsec
offload occurred for the packet or not. In the patches in this series, I
leave a warning for when the problematic path occurs because I cannot
figure out a secure way to fix the security issue that applies to the core
MACsec offload handling in the Rx path without breaking MACsec offload for
other vendors.
Shown at the bottom is an example use case where plaintext traffic sent to
a physical port of a NIC configured for MACsec offload is unable to be
handled correctly by the software stack when the NIC provides awareness to
the kernel about whether the received packet is MACsec traffic or not. In
this specific example, plaintext ARP requests are being responded with
MACsec encrypted ARP replies (which leads to routing information being
unable to be built for the requester).
Side 1
ip link del macsec0
ip address flush mlx5_1
ip address add 1.1.1.1/24 dev mlx5_1
ip link set dev mlx5_1 up
ip link add link mlx5_1 macsec0 type macsec sci 1 encrypt on
ip link set dev macsec0 address 00:11:22:33:44:66
ip macsec offload macsec0 mac
ip macsec add macsec0 tx sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16
ip macsec add macsec0 rx sci 2 on
ip macsec add macsec0 rx sci 2 sa 0 pn 1 on key 00 ead3664f508eb06c40ac7104cdae4ce5
ip address flush macsec0
ip address add 2.2.2.1/24 dev macsec0
ip link set dev macsec0 up
# macsec0 enters promiscuous mode.
# This enables all traffic received on macsec_vlan to be processed by
# the macsec offload rx datapath. This however means that traffic
# meant to be received by mlx5_1 will be incorrectly steered to
# macsec0 as well.
ip link add link macsec0 name macsec_vlan type vlan id 1
ip link set dev macsec_vlan address 00:11:22:33:44:88
ip address flush macsec_vlan
ip address add 3.3.3.1/24 dev macsec_vlan
ip link set dev macsec_vlan up
Side 2
ip link del macsec0
ip address flush mlx5_1
ip address add 1.1.1.2/24 dev mlx5_1
ip link set dev mlx5_1 up
ip link add link mlx5_1 macsec0 type macsec sci 2 encrypt on
ip link set dev macsec0 address 00:11:22:33:44:77
ip macsec offload macsec0 mac
ip macsec add macsec0 tx sa 0 pn 1 on key 00 ead3664f508eb06c40ac7104cdae4ce5
ip macsec add macsec0 rx sci 1 on
ip macsec add macsec0 rx sci 1 sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16
ip address flush macsec0
ip address add 2.2.2.2/24 dev macsec0
ip link set dev macsec0 up
# macsec0 enters promiscuous mode.
# This enables all traffic received on macsec_vlan to be processed by
# the macsec offload rx datapath. This however means that traffic
# meant to be received by mlx5_1 will be incorrectly steered to
# macsec0 as well.
ip link add link macsec0 name macsec_vlan type vlan id 1
ip link set dev macsec_vlan address 00:11:22:33:44:99
ip address flush macsec_vlan
ip address add 3.3.3.2/24 dev macsec_vlan
ip link set dev macsec_vlan up
Side 1
ping -I mlx5_1 1.1.1.2
PING 1.1.1.2 (1.1.1.2) from 1.1.1.1 mlx5_1: 56(84) bytes of data.
From 1.1.1.1 icmp_seq=1 Destination Host Unreachable
ping: sendmsg: No route to host
From 1.1.1.1 icmp_seq=2 Destination Host Unreachable
From 1.1.1.1 icmp_seq=3 Destination Host Unreachable
Changes:
v2->v3:
* Made dev paramater const for eth_skb_pkt_type helper as suggested by Sabrina
Dubroca <sd@queasysnail.net>
v1->v2:
* Fixed series subject to detail the issue being fixed
* Removed strange characters from cover letter
* Added comment in example that illustrates the impact involving
promiscuous mode
* Added patch for generalizing packet type detection
* Added Fixes: tags and targeting net
* Removed pointless warning in the heuristic Rx path for macsec offload
* Applied small refactor in Rx path offload to minimize scope of rx_sc
local variable
Jacob Keller [Tue, 23 Apr 2024 18:27:20 +0000 (11:27 -0700)]
ice: fix LAG and VF lock dependency in ice_reset_vf()
9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over
aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf().
The commit placed this lock acquisition just prior to the acquisition of
the VF configuration lock.
If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK
flag, this could deadlock with ice_vc_cfg_qs_msg() because it always
acquires the locks in the order of the VF configuration lock and then the
LAG mutex.
Lockdep reports this violation almost immediately on creating and then
removing 2 VF:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-rc6 #54 Tainted: G W O
------------------------------------------------------
kworker/60:3/6771 is trying to acquire lock: ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice]
but task is already holding lock: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&pf->lag_mutex);
lock(&vf->cfg_lock);
lock(&pf->lag_mutex);
lock(&vf->cfg_lock);
To avoid deadlock, we must acquire the LAG mutex only after acquiring the
VF configuration lock. Fix the ice_reset_vf() to acquire the LAG mutex only
after we either acquire or check that the VF configuration lock is held.
Fixes: 9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over aggregate") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240423182723.740401-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
iavf: Fix TC config comparison with existing adapter TC config
Same number of TCs doesn't imply that underlying TC configs are
same. The config could be different due to difference in number
of queues in each TC. Add utility function to determine if TC
configs are same.
Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf") Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Mineri Bhange <minerix.bhange@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240423182723.740401-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the MFS is set below the default (0x2600), a warning message is
reported like the following :
MFS for port 1 has been set below the default: 600
This message is a bit confusing as the number shown here (600) is in
fact an hexa number: 0x600 = 1536
Without any explicit "0x" prefix, this message is read like the MFS is
set to 600 bytes.
MFS, as per MTUs, are usually expressed in decimal base.
This commit reports both current and default MFS values in decimal
so it's less confusing for end-users.
A typical warning message looks like the following :
MFS for port 1 (1536) has been set below the default (9728)
Signed-off-by: Erwan Velu <e.velu@criteo.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") Link: https://lore.kernel.org/r/20240423182723.740401-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
i40e: Do not use WQ_MEM_RECLAIM flag for workqueue
Issue reported by customer during SRIOV testing, call trace:
When both i40e and the i40iw driver are loaded, a warning
in check_flush_dependency is being triggered. This seems
to be because of the i40e driver workqueue is allocated with
the WQ_MEM_RECLAIM flag, and the i40iw one is not.
Similar error was encountered on ice too and it was fixed by
removing the flag. Do the same for i40e too.
Dan Carpenter [Tue, 23 Apr 2024 16:15:22 +0000 (19:15 +0300)]
net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()
The rx_chn->irq[] array is unsigned int but it should be signed for the
error handling to work. Also if k3_udma_glue_rx_get_irq() returns zero
then we should return -ENXIO instead of success.
Fixes: 128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Link: https://lore.kernel.org/r/05282415-e7f4-42f3-99f8-32fde8f30936@moroto.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5e: Advertise mlx5 ethernet driver updates sk_buff md_dst for MACsec
mlx5 Rx flow steering and CQE handling enable the driver to be able to
update an skb's md_dst attribute as MACsec when MACsec traffic arrives when
a device is configured for offloading. Advertise this to the core stack to
take advantage of this capability.
Cc: stable@vger.kernel.org Fixes: b7c9400cbc48 ("net/mlx5e: Implement MACsec Rx data path using MACsec skb_metadata_dst") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20240423181319.115860-5-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
macsec: Detect if Rx skb is macsec-related for offloading devices that update md_dst
Can now correctly identify where the packets should be delivered by using
md_dst or its absence on devices that provide it.
This detection is not possible without device drivers that update md_dst. A
fallback pattern should be used for supporting such device drivers. This
fallback mode causes multicast messages to be cloned to both the non-macsec
and macsec ports, independent of whether the multicast message received was
encrypted over MACsec or not. Other non-macsec traffic may also fail to be
handled correctly for devices in promiscuous mode.
macsec: Enable devices to advertise whether they update sk_buff md_dst during offloads
Cannot know whether a Rx skb missing md_dst is intended for MACsec or not
without knowing whether the device is able to update this field during an
offload. Assume that an offload to a MACsec device cannot support updating
md_dst by default. Capable devices can advertise that they do indicate that
an skb is related to a MACsec offloaded packet using the md_dst.
linke li [Tue, 23 Apr 2024 10:53:26 +0000 (18:53 +0800)]
net: bridge: remove redundant check of f->dst
In br_fill_forward_path(), f->dst is checked not to be NULL, then
immediately read using READ_ONCE and checked again. The first check is
useless, so this patch aims to remove the redundant check of f->dst.
Signed-off-by: linke li <lilinke99@qq.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 25 Apr 2024 11:18:37 +0000 (12:18 +0100)]
Merge tag 'wireless-2024-04-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes berg says:
====================
Fixes for the current cycle:
* ath11k: convert to correct RCU iteration of IPv6 addresses
* iwlwifi: link ID, FW API version, scanning and PASN fixes
* cfg80211: NULL-deref and tracing fixes
* mac80211: connection mode, mesh fast-TX, multi-link and
various other small fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The DP83869 driver sets the MII bit (needed for PHY to work in MII mode)
only if the op-mode is either DP83869_100M_MEDIA_CONVERT or
DP83869_RGMII_100_BASE.
Some drivers i.e. ICSSG support MII mode with op-mode as
DP83869_RGMII_COPPER_ETHERNET for which the MII bit is not set in dp83869
driver. As a result MII mode on ICSSG doesn't work and below log is seen.
TI DP83869 300b2400.mdio:0f: selected op-mode is not valid with MII mode
icssg-prueth icssg1-eth: couldn't connect to phy ethernet-phy@0
icssg-prueth icssg1-eth: can't phy connect port MII0
Fix this by setting MII bit for DP83869_RGMII_COPPER_ETHERNET op-mode as
well.
Fixes: 94e86ef1b801 ("net: phy: dp83869: support mii mode when rgmii strap cfg is used") Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: mv88e6xxx: Avoid EEPROM timeout without EEPROM on 88E6250-family switches
88E6250-family switches have the quirk that the EEPROM Running flag can
get stuck at 1 when no EEPROM is connected, causing
mv88e6xxx_g2_eeprom_wait() to time out. We still want to wait for the
EEPROM however, to avoid interrupting a transfer and leaving the EEPROM
in an invalid state.
The condition to wait for recommended by the hardware spec is the EEInt
flag, however this flag is cleared on read, so before the hardware reset,
is may have been cleared already even though the EEPROM has been read
successfully.
For this reason, we revive the mv88e6xxx_g1_wait_eeprom_done() function
that was removed in commit 6ccf50d4d474
("net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absent") in a
slightly refactored form, and introduce a new
mv88e6xxx_g1_wait_eeprom_done_prereset() that additionally handles this
case by triggering another EEPROM reload that can be waited on.
On other switch models without this quirk, mv88e6xxx_g2_eeprom_wait() is
kept, as it avoids the additional reload.
Fixes: 6ccf50d4d474 ("net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absent") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: mv88e6xxx: Add support for model-specific pre- and post-reset handlers
Instead of calling mv88e6xxx_g2_eeprom_wait() directly from
mv88e6xxx_hardware_reset(), add configurable pre- and post-reset hard
reset handlers. Initially, the handlers are set to
mv88e6xxx_g2_eeprom_wait() for all families that have get/set_eeprom()
to match the existing behavior. No functional change intended (except
for additional error messages on failure).
Fixes: 6ccf50d4d474 ("net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absent") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 25 Apr 2024 07:52:12 +0000 (08:52 +0100)]
Merge branch 'tcp-trace-next'
Philo Lu says:
====================
tcp: update TCPCB_EVER_RETRANS after trace_tcp_retransmit_skb()
Move TCPCB_EVER_RETRANS updating after the trace_tcp_retransmit_skb()
in __tcp_retransmit_skb(), and then we are aware of whether the skb has
ever been retransmitted in this tracepoint. This can be used, e.g., to get
retransmission efficiency by counting skbs w/ and w/o TCPCB_EVER_RETRANS
(through bpf tracing programs).
For this purpose, TCPCB_EVER_RETRANS is also needed to be exposed to bpf.
Previously, the flags are defined as macros in struct tcp_skb_cb. I moved them
out into a new enum, and then they can be accessed with vmlinux.h.
We have discussed to achieve this with BPF_SOCK_OPS in [0], and using
tracepoint is thought to be a better solution.
Philo Lu [Sun, 21 Apr 2024 04:20:09 +0000 (12:20 +0800)]
tcp: update sacked after tracepoint in __tcp_retransmit_skb
Marking TCP_SKB_CB(skb)->sacked with TCPCB_EVER_RETRANS after the
traceopint (trace_tcp_retransmit_skb), then we can get the
retransmission efficiency by counting skbs w/ and w/o TCPCB_EVER_RETRANS
mark in this tracepoint.
We have discussed to achieve this with BPF_SOCK_OPS in [0], and using
tracepoint is thought to be a better solution.
Philo Lu [Sun, 21 Apr 2024 04:20:08 +0000 (12:20 +0800)]
tcp: move tcp_skb_cb->sacked flags to enum
Move the flag definitions for tcp_skb_cb->sacked into a new enum named
tcp_skb_cb_sacked_flags, then we can get access to them in bpf via
vmlinux.h, e.g., in tracepoints.
This patch does not change any existing functionality.
Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 25 Apr 2024 03:29:49 +0000 (20:29 -0700)]
Merge tag 'for-net-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()
- hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor
- qca: fix invalid device address check
- hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync
- Fix type of len in {l2cap,sco}_sock_getsockopt_old()
- btusb: mediatek: Fix double free of skb in coredump
- btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
- btusb: Fix triggering coredump implementation for QCA
* tag 'for-net-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()
Bluetooth: hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor
Bluetooth: qca: fix NULL-deref on non-serdev setup
Bluetooth: qca: fix NULL-deref on non-serdev suspend
Bluetooth: btusb: mediatek: Fix double free of skb in coredump
Bluetooth: MGMT: Fix failing to MGMT_OP_ADD_UUID/MGMT_OP_REMOVE_UUID
Bluetooth: qca: fix invalid device address check
Bluetooth: hci_event: Fix sending HCI_OP_READ_ENC_KEY_SIZE
Bluetooth: btusb: Fix triggering coredump implementation for QCA
Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync
Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()
====================
Jakub Kicinski [Wed, 24 Apr 2024 00:21:48 +0000 (17:21 -0700)]
eth: bnxt: fix counting packets discarded due to OOM and netpoll
I added OOM and netpoll discard counters, naively assuming that
the cpr pointer is pointing to a common completion ring.
Turns out that is usually *a* completion ring but not *the*
completion ring which bnapi->cp_ring points to. bnapi->cp_ring
is where the stats are read from, so we end up reporting 0
thru ethtool -S and qstat even though the drop events have happened.
Make 100% sure we're recording statistics in the correct structure.
====================
selftests: net: extract BPF building logic from the Makefile
This has been sitting in my tree for a while. I will soon add YNL/libynl
support for networking selftests. This prompted a small cleanup of
the selftest makefile for net/. We don't want to be piling logic
for each library in there. YNL will get its own .mk file which can
be included. Do the same for the BPF building section, already.
No funcional changes here, just a code move and small rename.
====================
Jakub Kicinski [Tue, 23 Apr 2024 18:35:42 +0000 (11:35 -0700)]
selftests: net: extract BPF building logic from the Makefile
The BPF sample building code looks a little bit spaghetti-ish
so move it out to its own Makefile snippet. Similar in the spirit
to how we include lib.mk. libynl will soon get a similar snippet.
There is a small change hiding in the move, the relative
paths (../../.., ../.. etc) are replaced with variables
from lib.mk such as top_srcdir and selfdir.
Jakub Kicinski [Tue, 23 Apr 2024 18:35:41 +0000 (11:35 -0700)]
selftests: net: name bpf objects consistently and simplify Makefile
The BPF sources moved with bpf_offload.py have a suffix of .bpf.c
which seems to be useful convention. Rename the 2 other BPF sources
we had. Use wildcard in the Makefile, since we can match all those
files easily now.
net: pse-pd: Kconfig: Add missing Regulator API dependency
The PSE (Power Sourcing Equipment) API now relies on the Regulator API.
However, the Regulator dependency was missing from Kconfig. This patch
adds the necessary dependency, resolving the issue of the missing
dependency and ensuring proper functionality of the PSE API.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404201020.mqX2IOu7-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202404200036.D8ap1Mf5-lkp@intel.com/ Fixes: d83e13761d5b ("net: pse-pd: Use regulator framework within PSE framework") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://lore.kernel.org/r/20240423-fix_poe-v3-3-e50f32f5fa59@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clarify PSE regulator as voltage regulator, not current.
The PSE (Power Sourcing Equipment) regulator is defined as a voltage
regulator, maintaining fixed voltage while accommodating varying current.
Fixes: d83e13761d5b ("net: pse-pd: Use regulator framework within PSE framework") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://lore.kernel.org/r/20240423-fix_poe-v3-2-e50f32f5fa59@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / users / jedix / linux-maple.git / log