Brendan Cunningham [Tue, 22 Aug 2023 14:07:53 +0000 (10:07 -0400)]
RDMA/hfi1: Move user SDMA system memory pinning code to its own file
Move user SDMA system memory page-pinning code from user_sdma.c to
pin_system.c. Put declarations for non-static functions in pinning.h.
System memory pinning is necessary for processing user SDMA requests but
actual steps are invisible to user SDMA request-processing code. Moving
system memory pinning code for user SDMA to its own file makes this
distinction apparent.
Jinjie Ruan [Tue, 22 Aug 2023 03:35:38 +0000 (11:35 +0800)]
RDMA/hfi1: Use list_for_each_entry() helper
Convert list_for_each() to list_for_each_entry() so that the pos list_head
pointer and list_entry() call are no longer needed, which can
reduce a few lines of code. No functional changed.
Yonatan Nachum [Tue, 22 Aug 2023 08:27:25 +0000 (08:27 +0000)]
RDMA/efa: Fix wrong resources deallocation order
When trying to destroy QP or CQ, we first decrease the refcount and
potentially free memory regions allocated for the object and then
request the device to destroy the object. If the device fails, the
object isn't fully destroyed so the user/IB core can try to destroy the
object again which will lead to underflow when trying to decrease an
already zeroed refcount.
Deallocate resources in reverse order of allocating them to safely free
them.
Fixes: ff6629f88c52 ("RDMA/efa: Do not delay freeing of DMA pages") Reviewed-by: Michael Margolin <mrgolin@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Yonatan Nachum <ynachum@amazon.com> Link: https://lore.kernel.org/r/20230822082725.31719-1-ynachum@amazon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
Guoqing Jiang [Mon, 21 Aug 2023 13:32:53 +0000 (21:32 +0800)]
RDMA/siw: Balance the reference of cep->kref in the error path
The siw_connect can go to err in below after cep is allocated successfully:
1. If siw_cm_alloc_work returns failure. In this case socket is not
assoicated with cep so siw_cep_put can't be called by siw_socket_disassoc.
We need to call siw_cep_put twice since cep->kref is increased once after
it was initialized.
2. If siw_cm_queue_work can't find a work, which means siw_cep_get is not
called in siw_cm_queue_work, so cep->kref is increased twice by siw_cep_get
and when associate socket with cep after it was initialized. So we need to
call siw_cep_put three times (one in siw_socket_disassoc).
3. siw_send_mpareqrep returns error, this scenario is similar as 2.
So we need to remove one siw_cep_put in the error path.
restrack: ------------[ cut here ]------------
infiniband hfi1_0: BUG: RESTRACK detected leak of resources
restrack: Kernel PD object allocated by ib_isert is not freed
restrack: Kernel CQ object allocated by ib_core is not freed
restrack: Kernel QP object allocated by rdma_cm is not freed
restrack: ------------[ cut here ]------------
Fixes: 699826f4e30a ("IB/isert: Fix incorrect release of isert connection") Reported-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Closes: https://lore.kernel.org/all/921cd1d9-2879-f455-1f50-0053fe6a6655@cornelisnetworks.com Link: https://lore.kernel.org/r/a27982d3235005c58f6d321f3fad5eb6e1beaf9e.1692604607.git.leonro@nvidia.com Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Christopher Bednarz [Fri, 18 Aug 2023 14:48:38 +0000 (09:48 -0500)]
RDMA/irdma: Prevent zero-length STAG registration
Currently irdma allows zero-length STAGs to be programmed in HW during
the kernel mode fast register flow. Zero-length MR or STAG registration
disable HW memory length checks.
Improve gaps in bounds checking in irdma by preventing zero-length STAG or
MR registrations except if the IB_PD_UNSAFE_GLOBAL_RKEY is set.
Cheng Xu [Thu, 17 Aug 2023 10:21:51 +0000 (18:21 +0800)]
RDMA/erdma: Implement hierarchical MTT
Hierarchical MTT allows large MR registration without the need of
continuous physical address. This commit adds the support of hierarchical
MTT support for erdma.
Cheng Xu [Thu, 17 Aug 2023 10:21:50 +0000 (18:21 +0800)]
RDMA/erdma: Refactor the storage structure of MTT entries
Currently our MTT only support inline mtt entries (0 level MTT) and
indirect MTT entries (1 level mtt), which will limit the maximum length
of MRs. In order to implement a multi-level MTT, we refactor the
structure of MTT first.
Chengchang Tang [Wed, 16 Aug 2023 09:18:10 +0000 (17:18 +0800)]
RDMA/hns: Dump whole QP/CQ/MR resource in raw
Currently, some fields in the QP/CQ/MR resource can be dumped by
rdma-tool, but this information is not enough. It is very
inconvenient to continue to expand on the current field, and it
will also introduce some trouble to parse these raw data.
This patch dump whole resource in raw to avoid the above problems.
Gustavo A. R. Silva [Tue, 15 Aug 2023 20:39:53 +0000 (14:39 -0600)]
RDMA/mlx4: Copy union directly
Copy union directly instead of using memcpy().
Note that in this case, a direct assignment is more readable and
consistent with the subsequent assignments.
This addresses the following -Wstringop-overflow warning seen in s390
with defconfig:
drivers/infiniband/hw/mlx4/main.c:296:33: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=]
296 | memcpy(&port_gid_table->gids[free].gid,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
297 | &attr->gid, sizeof(attr->gid));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This helps with the ongoing efforts to globally enable
-Wstringop-overflow.
RDMA/bnxt_re: Add support for dmabuf pinned memory regions
Support the new verb which indicates dmabuf support. bnxt doesn't support
ODP. So use the pinned version of the dmabuf APIs to enable bnxt_re
devices to work as dmabuf importer.
Kalesh AP [Wed, 2 Aug 2023 09:00:23 +0000 (02:00 -0700)]
IB/core: Add more speed parsing in ib_get_width_and_speed()
When the Ethernet driver does not provide the number of lanes
in the __ethtool_get_link_ksettings() response, the function
ib_get_width_and_speed() does not take consideration of 50G,
100G and 200G speeds while calculating the IB width and speed.
Update the width and speed for the above netdev speeds.
Yue Haibing [Wed, 9 Aug 2023 14:27:18 +0000 (22:27 +0800)]
RDMA Remove unused function declarations
Commit c2261dd76b54 ("RDMA/device: Add ib_device_set_netdev() as an alternative to get_netdev")
declared but never implemented ib_device_netdev(), remove it.
Commit 922a8e9fb2e0 ("RDMA: iWARP Connection Manager.") declared but never implemented
iw_cm_unbind_qp() and iw_cm_get_qp().
Ivan Orlov [Fri, 4 Aug 2023 15:05:28 +0000 (17:05 +0200)]
RDMA: Make all 'class' structures const
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Leon Romanovsky <leon@kernel.org> Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Cc: "Md. Haris Iqbal" <haris.iqbal@ionos.com> Cc: Jack Wang <jinpu.wang@ionos.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yishai Hadas <yishaih@nvidia.com> Cc: Ivan Orlov <ivan.orlov0322@gmail.com> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/2023080427-commuting-crewless-cbee@gregkh Signed-off-by: Leon Romanovsky <leon@kernel.org>
Ruan Jinjie [Fri, 4 Aug 2023 08:21:01 +0000 (16:21 +0800)]
RDMA: Remove unnecessary NULL values
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.
Junxian Huang [Fri, 4 Aug 2023 01:27:09 +0000 (09:27 +0800)]
RDMA/hns: Fix incorrect post-send with direct wqe of wr-list
Currently, direct wqe is not supported for wr-list. RoCE driver excludes
direct wqe for wr-list by judging whether the number of wr is 1.
For a wr-list where the second wr is a length-error atomic wr, the
post-send driver handles the first wr and adds 1 to the wr number counter
firstly. While handling the second wr, the driver finds out a length error
and terminates the wr handle process, remaining the counter at 1. This
causes the driver mistakenly judges there is only 1 wr and thus enters
the direct wqe process, carrying the current length-error atomic wqe.
This patch fixes the error by adding a judgement whether the current wr
is a bad wr. If so, use the normal doorbell process but not direct wqe
despite the wr number is 1.
Selvin Xavier [Thu, 3 Aug 2023 08:45:23 +0000 (01:45 -0700)]
RDMA/bnxt_re: Fix the sideband buffer size handling for FW commands
bnxt_qplib_rcfw_alloc_sbuf allocates 24 bytes and it is better to fit
on stack variables. This way we can avoid unwanted kmalloc call.
Call dma_alloc_coherent directly instead of wrapper
bnxt_qplib_rcfw_alloc_sbuf.
Also, FW expects the side buffer needs to be aligned to
BNXT_QPLIB_CMDQE_UNITS(16B). So align the size to have the
extra padding bytes.
Kalesh AP [Thu, 3 Aug 2023 08:45:21 +0000 (01:45 -0700)]
RDMA/bnxt_re: Fix max_qp count for virtual functions
Driver has not accounted QP1 for virtual functions
when fetching device attributes and hence max_qp
count is one less than active_qp count. Fixed driver
so that it counts QP1 for virtual functions as well
while fetching device attributes
Fixes: ccd9d0d3dffc ("RDMA/bnxt_re: Enable RoCE on virtual functions") Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1691052326-32143-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
Gustavo A. R. Silva [Wed, 2 Aug 2023 14:46:26 +0000 (08:46 -0600)]
RDMA/irdma: Replace one-element array with flexible-array member
One-element and zero-length arrays are deprecated. So, replace
one-element array in struct irdma_qvlist_info with flexible-array
member.
A patch for this was sent a while ago[1]. However, it seems that, at
the time, the changes were partially folded[2][3], and the actual
flexible-array transformation was omitted. This patch fixes that.
The only binary difference seen before/after changes is shown below:
Bob Pearson [Fri, 21 Jul 2023 20:07:49 +0000 (15:07 -0500)]
RDMA/rxe: Fix incomplete state save in rxe_requester
If a send packet is dropped by the IP layer in rxe_requester()
the call to rxe_xmit_packet() can fail with err == -EAGAIN.
To recover, the state of the wqe is restored to the state before
the packet was sent so it can be resent. However, the routines
that save and restore the state miss a significnt part of the
variable state in the wqe, the dma struct which is used to process
through the sge table. And, the state is not saved before the packet
is built which modifies the dma struct.
Under heavy stress testing with many QPs on a fast node sending
large messages to a slow node dropped packets are observed and
the resent packets are corrupted because the dma struct was not
restored. This patch fixes this behavior and allows the test cases
to succeed.
Bob Pearson [Tue, 20 Jun 2023 14:01:43 +0000 (09:01 -0500)]
RDMA/rxe: Fix rxe_modify_srq
This patch corrects an error in rxe_modify_srq where if the
caller changes the srq size the actual new value is not returned
to the caller since it may be larger than what is requested.
Additionally it open codes the subroutine rcv_wqe_size() which
adds very little value, and makes some whitespace changes.
Bob Pearson [Tue, 20 Jun 2023 13:55:21 +0000 (08:55 -0500)]
RDMA/rxe: Fix unsafe drain work queue code
If create_qp does not fully succeed it is possible for qp cleanup
code to attempt to drain the send or recv work queues before the
queues have been created causing a seg fault. This patch checks
to see if the queues exist before attempting to drain them.
Link: https://lore.kernel.org/r/20230620135519.9365-3-rpearsonhpe@gmail.com Reported-by: syzbot+2da1965168e7dbcba136@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-rdma/00000000000012d89205fe7cfe00@google.com/raw Fixes: 49dc9c1f0c7e ("RDMA/rxe: Cleanup reset state handling in rxe_resp.c") Fixes: fbdeb828a21f ("RDMA/rxe: Cleanup error state handling in rxe_comp.c") Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Bob Pearson [Tue, 20 Jun 2023 13:55:19 +0000 (08:55 -0500)]
RDMA/rxe: Move work queue code to subroutines
This patch:
- Moves code to initialize a qp send work queue to a
subroutine named rxe_init_sq.
- Moves code to initialize a qp recv work queue to a
subroutine named rxe_init_rq.
- Moves initialization of qp request and response packet
queues ahead of work queue initialization so that cleanup
of a qp if it is not fully completed can successfully
attempt to drain the packet queues without a seg fault.
- Makes minor whitespace cleanups.
Yang Li [Mon, 31 Jul 2023 01:59:15 +0000 (09:59 +0800)]
RDMA/irdma: Fix one kernel-doc comment
Remove description of @free_hwcqp in irdma_destroy_cqp().
to silence the warning:
drivers/infiniband/hw/irdma/hw.c:580: warning: Excess function parameter 'free_hwcqp' description in 'irdma_destroy_cqp'
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6028 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20230731015915.34867-1-yang.lee@linux.alibaba.com Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Bernard Metzler [Fri, 28 Jul 2023 11:44:18 +0000 (13:44 +0200)]
RDMA/siw: Fix tx thread initialization.
Immediately removing the siw module after insertion may
crash in siw_stop_tx_thread(), if the according thread did
not yet had a chance to initialize its wait queue and
siw_stop_tx_thread() tries to wakeup that thread. Initializing
the threads state before spwaning it fixes it.
Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20230728114418.124328-1-bmt@zurich.ibm.com Tested-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Leon Romanovsky <leon@kernel.org>
RDMA/irdma: Allow accurate reporting on QP max send/recv WR
Currently the attribute cap.max_send_wr and cap.max_recv_wr
sent from user-space during create QP are the provider computed
SQ/RQ depth as opposed to raw values passed from application.
This inhibits computation of an accurate value for max_send_wr
and max_recv_wr for this QP in the kernel which matches the value
returned in user create QP. Also these capabilities needs to be
reported from the driver in query QP.
Add support by extending the ABI to allow the raw cap.max_send_wr and
cap.max_recv_wr to be passed from user-space, while keeping compatibility
for the older scheme.
The internal HW depth and shift needed for the WQs needs to be computed
now for both kernel and user-mode QPs. Add new helpers to assist with this:
irdma_uk_calc_depth_shift_sq, irdma_uk_calc_depth_shift_rq and
irdma_uk_calc_depth_shift_wq.
Consolidate all the user mode QP setup into a new function
irdma_setup_umode_qp which keeps it with its counterpart
irdma_setup_kmode_qp.
Previously, there was no way to query the number of lanes for a network
card, so the same netdev_speed would result in a fixed pair of width and
speed. As network card specifications become more diverse, such fixed
mode is no longer suitable, so a method is needed to obtain the correct
width and speed based on the number of lanes.
This patch retrieves netdev lanes and speed from net_device and
translates them to IB width and speed.
bnxt_re: Update the hw counters for resource stats
Report the additional resource counters which enables
better debugging. Includes active RC/UD QPs,
Watermark of the resources and a count that indicates the
resize cq operations after driver load.
Krzysztof Czurylo [Tue, 25 Jul 2023 15:55:04 +0000 (10:55 -0500)]
RDMA/irdma: Add table based lookup for CQ pointer during an event
Add a CQ table based loookup to allow quick search
for CQ pointer having CQ ID in case of CQ related
asynchrononous event. The table is implemented in a
similar fashion to QP table.
Also add a reference counters for CQ. This is to prevent
destroying CQ while an asynchronous event is being processed.
The memory resource table size is sized higher with this update,
and this table doesn't need to be physically contiguous, so use
a vzalloc vs kzalloc to allocate the table.
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com> Signed-off-by: Sindhu Devale <sindhu.devale@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20230725155505.1069-4-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
RDMA/irdma: Drop a local in irdma_sc_get_next_aeqe
Drop the local wqe_idx in irdma_sc_get_next_aeqe and instead
store the wqe_idx in the info structure for all asynchronous events(AE)
received. There is no reason it should be tied to a specific AE source.
User applications alert the driver when the Doorbell FIFO
reaches the alarm threshold. The driver updates the pacing
parameters in the shared page to do the maximum pacing
by the application till the DB FIFO congestion reduces to
pacing threshold. Driver keeps checking the DB FIFO depth
at the pacing interval and gradually adjusts the pacing level.
Once the pacing level reaches default values (no congestion in
the FIFO) pacing gets completed.
Checks for pacing feature capability and get the doorbell pacing
configuration using FW commands. Allocate a page and initialize
the pacing parameters for the applications. Cleanup the page and
de-initialize the pacing during device removal.
Chuck Lever [Mon, 17 Jul 2023 15:12:32 +0000 (11:12 -0400)]
RDMA/cma: Avoid GID lookups on iWARP devices
We would like to enable the use of siw on top of a VPN that is
constructed and managed via a tun device. That hasn't worked up
until now because ARPHRD_NONE devices (such as tun devices) have
no GID for the RDMA/core to look up.
But it turns out that the egress device has already been picked for
us -- no GID is necessary. addr_handler() just has to do the right
thing with it.
Chuck Lever [Mon, 17 Jul 2023 15:12:12 +0000 (11:12 -0400)]
RDMA/siw: Fabricate a GID on tun and loopback devices
LOOPBACK and NONE (tunnel) devices have all-zero MAC addresses.
Currently, siw_device_create() falls back to copying the IB device's
name in those cases, because an all-zero MAC address breaks the RDMA
core address resolution mechanism.
However, at the point when siw_device_create() constructs a GID, the
ib_device::name field is uninitialized, leaving the MAC address to
remain in an all-zero state.
Fabricate a random artificial GID for such devices, and ensure this
artificial GID is returned for all device query operations.
Link: https://lore.kernel.org/r/168960673260.3007.12378736853793339110.stgit@manet.1015granger.net Reported-by: Tom Talpey <tom@talpey.com> Fixes: a2d36b02c15d ("RDMA/siw: Enable siw on tunnel devices") Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Reviewed-by: Tom Talpey <tom@talpey.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Michael Margolin [Mon, 3 Jul 2023 15:34:04 +0000 (15:34 +0000)]
RDMA/efa: Add RDMA write HW statistics counters
Update device API and request RDMA write counters if RDMA write is
supported by device. Expose newly added counters through ib core
counters mechanism.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com> Reviewed-by: Yonatan Nachum <ynachum@amazon.com> Signed-off-by: Michael Margolin <mrgolin@amazon.com> Link: https://lore.kernel.org/r/20230703153404.30877-1-mrgolin@amazon.com Reviewed-by: Gal Pressman <gal.pressman@linux.dev> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Yuanyuan Zhong [Thu, 29 Jun 2023 21:32:48 +0000 (15:32 -0600)]
RDMA/mlx5: align MR mem allocation size to power-of-two
The MR memory allocation requests extra bytes to guarantee that there
is enough space to find the memory aligned to MLX5_UMR_ALIGN.
For power-of-two sizes, the alignment can be guaranteed by kmalloc()
according to commit 59bb47985c1d ("mm, sl[aou]b: guarantee natural
alignment for kmalloc(power-of-two)").
So if target alignment is power-of-two and adding the extra bytes
crosses a power-of-two boundary, use the next power-of-two as the
allocation size.
We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.
The answer is "No. No we cannot".
I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street. And at the yearly
maintainer summit, we will all sing the alphabet song together.
I doubt I will keep doing this. At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.
Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- swiotlb area sizing fixes (Petr Tesarik)
* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: reduce the number of areas to match actual memory pool size
swiotlb: always set the number of areas before allocating the pool
Merge tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the mechanism to park CPUs with an INIT IPI.
On shutdown or kexec, the kernel tries to park the non-boot CPUs with
an INIT IPI. But the same code path is also used by the crash utility.
If the CPU which panics is not the boot CPU then it sends an INIT IPI
to the boot CPU which resets the machine.
Prevent this by validating that the CPU which runs the stop mechanism
is the boot CPU. If not, leave the other CPUs in HLT"
* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Don't send INIT to boot CPU
Merge tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fixes for KVM
- fix for loongson build and cpu probing
- DT fixes
* tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
MIPS: dts: add missing space before {
MIPS: Loongson: Fix build error when make modules_install
MIPS: KVM: Fix NULL pointer dereference
MIPS: Loongson: Fix cpu_probe_loongson() again
Merge tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix potential use after free in unmount
- minor cleanup
- add worker to cleanup stale directory leases
* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add a laundromat thread for cached directories
smb: client: remove redundant pointer 'server'
cifs: fix session state transition to avoid use-after-free issue
Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"16 hotfixes. Six are cc:stable and the remainder address post-6.4
issues"
The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since
it was all hopefully fixed in mainline.
* tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib: dhry: fix sleeping allocations inside non-preemptable section
kasan, slub: fix HW_TAGS zeroing with slub_debug
kasan: fix type cast in memory_is_poisoned_n
mailmap: add entries for Heiko Stuebner
mailmap: update manpage link
bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
MAINTAINERS: add linux-next info
mailmap: add Markus Schneider-Pargmann
writeback: account the number of pages written back
mm: call arch_swap_restore() from do_swap_page()
squashfs: fix cache race with migration
mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison
docs: update ocfs2-devel mailing list address
MAINTAINERS: update ocfs2-devel mailing list address
mm: disable CONFIG_PER_VMA_LOCK until its fixed
fork: lock VMAs of the parent process when forking
fork: lock VMAs of the parent process when forking
When forking a child process, the parent write-protects anonymous pages
and COW-shares them with the child being forked using copy_present_pte().
We must not take any concurrent page faults on the source vma's as they
are being processed, as we expect both the vma and the pte's behind it
to be stable. For example, the anon_vma_fork() expects the parents
vma->anon_vma to not change during the vma copy.
A concurrent page fault on a page newly marked read-only by the page
copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the
source vma, defeating the anon_vma_clone() that wasn't done because the
parent vma originally didn't have an anon_vma, but we now might end up
copying a pte entry for a page that has one.
Before the per-vma lock based changes, the mmap_lock guaranteed
exclusion with concurrent page faults. But now we need to do a
vma_start_write() to make sure no concurrent faults happen on this vma
while it is being processed.
This fix can potentially regress some fork-heavy workloads. Kernel
build time did not show noticeable regression on a 56-core machine while
a stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~5% regression. If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance. Further
optimizations are possible if this regression proves to be problematic.
projects / linux.git / log