Keith Busch [Fri, 22 May 2015 18:28:31 +0000 (12:28 -0600)]
NVMe: Fix obtaining command result
Replaces req->sense_len usage, which is not owned by the LLD, to
req->special to contain the command result for driver created commands,
and sets the result unconditionally on completion.
Signed-off-by: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@fb.com> Fixes: d29ec8241c10 ("nvme: submit internal commands through the block layer") Signed-off-by: Jens Axboe <axboe@fb.com>
(cherry picked from commit a0a931d6a2c1fbc5d5966ebf0e7a043748692c22 and
added missing pieces from d29ec8241c10eacf59c23b3828a88dbae06e7e3f
backport)
Orabug: 24532912 Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manish Chopra [Thu, 30 Jun 2016 06:35:19 +0000 (02:35 -0400)]
qede: qede_poll refactoring
This patch cleanups qede_poll() routine a bit
and allows qede_poll() to do single iteration to handle
TX completion [As under heavy TX load qede_poll() might
run for indefinite time in the while(1) loop for TX
completion processing and cause CPU stuck].
Signed-off-by: Manish <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Manish Chopra [Thu, 30 Jun 2016 06:35:18 +0000 (02:35 -0400)]
qede: Add support for handling IP fragmented packets.
When handling IP fragmented packets with csum in their
transport header, the csum isn't changed as part of the
fragmentation. As a result, the packet containing the
transport headers would have the correct csum of the original
packet, but one that mismatches the actual packet that
passes on the wire. As a result, on receive path HW would
give an indication that the packet has incorrect csum,
which would cause qede to discard the incoming packet.
Since HW also delivers a notification of IP fragments,
change driver behavior to pass such incoming packets
to stack and let it make the decision whether it needs
to be dropped.
Signed-off-by: Manish <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Static checker warnings:
drivers/net/ethernet/qlogic/qede/qede_ethtool.c:435 qede_get_coalesce()
warn: passing casted pointer '&coal->rx_coalesce_usecs' to
'edev->ops->common->get_coalesce()' 32 vs 16.
The u32 pointer is being typecasted to u16 which may fail for big-endian
platforms.
Fixes: d552fa84cb35 ("qede: Add support for coalescing config read/update.") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
The data types for rx/tx_coalesce_usecs should be u16.
Fixes: commit 722003ac40c2 ("qed: Add support for coalescing config read/update.") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
qed: Add support for coalescing config read/update.
This patch adds support for configuring the device tx/rx coalescing
timeout values in the order of micro seconds. It also adds APIs for
upper layer drivers for reading/updating the coalescing values.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Query API reads the dcbx data from the device shared memory and return it
to the caller. The config API configures the user provided dcbx values on
the device, and initiates the dcbx negotiation with the peer.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Dan Carpenter [Tue, 7 Jun 2016 12:04:16 +0000 (15:04 +0300)]
qed: potential overflow in qed_cxt_src_t2_alloc()
In the current code "ent_per_page" could be more than "conn_num" making
"conn_num" negative after the subtraction. In the next iteration
through the loop then the negative is treated as a very high positive
meaning we don't put a limit on "ent_num". It could lead to memory
corruption.
Fixes: dbb799c39717 ('qed: Initialize hardware for new protocols') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Yuval Mintz [Sun, 5 Jun 2016 10:11:16 +0000 (13:11 +0300)]
qed: PF to reply to unknown messages
If a future VF would send the PF an unknown message, the PF today would
not send a reply. This would have 2 bad effects:
a. VF would have to timeout on the request.
b. If VF were to send an additional message to PF, firmware would mark
it as malicious.
Instead, if there's some valid reply-address on the message - let the PF
answer and tell the VF it doesn't know the message.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Yuval Mintz [Sun, 5 Jun 2016 10:11:15 +0000 (13:11 +0300)]
qed: PF enforce MAC limitation of VFs
The only limitation relating to MACs the PF enforce today on its VFs
is in case it has a forced-unicast MAC address for them, in which case
they can't configure other unicast addresses.
Specifically, the PF isn't enforcing the number of MAC addresse a VF can
configure regardless of the nubmer of such filters agreed upon by PF and
VF during the acquisition process.
PF's shadow-config is now extended to also contain information about its
VFs' unicast addresses configuration, allowing such enforcement.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Yuval Mintz [Sun, 5 Jun 2016 10:11:14 +0000 (13:11 +0300)]
qed: Move doorbell calculation from VF to PF
Today, the VF is aware of its queues context-ids, and calculates the
doorbell address when opening its queues on its own.
The configuration of doorbells in HW can sometime in the future be changed
by the PF [hw has several configurable features that might affect doorbell
addresses, e.g., dpm support], this would break compatibility with older
VFs as their calculated doorbell addresses would be incorrect for such a
configuration.
In order to avoid such a backward compatibility failure, let the PF make
the calculation of the doorbell offset based on the context-id, and pass
that to the VF.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Yuval Mintz [Sun, 5 Jun 2016 10:11:13 +0000 (13:11 +0300)]
qed: Make PF more robust against malicious VF
There are several requests the VF can make toward the PF which the driver
would pass to firmware without checking the validity first - specifically,
opening queues and updating vports. Such configurations might cause the
firmware to assert.
This adds validation of the legality of said configurations on the PF side
before passing it onward via ramrod to firmware.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Yuval Mintz [Sun, 5 Jun 2016 10:11:12 +0000 (13:11 +0300)]
qed: PF-VF resource negotiation
One of the goals of the vf's first message to the PF [acquire]
is to learn about the number of resources available to it [macs, vlans,
etc.]. This is done via negotiation - the VF requires a set of resources,
which the PF either approves or disaproves and sends a smaller set of
resources as alternative. In this later case, the VF is then expected to
either abort the probe or re-send the acquire message with less
required resources.
While this infrastructure exists since the initial submision of qed
SRIOV support, it's in fact completely inoperational - PF isn't really
looking into the resources the VF has asked for and is never going to
reply to the VF that it lacks resources.
This patch addresses this flow, fixing it and allowing the PF and VF
to actually agree on a set of resources.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Yuval Mintz [Sun, 5 Jun 2016 10:11:11 +0000 (13:11 +0300)]
qed: Relax VF firmware requirements
Current driver require an exact match between VF and PF storm firmware;
Any difference would fail the VF acquire message, causing the VF probe
to be aborted.
While there's still dependencies between the two, the recent FW submission
has relaxed the match requirement - instead of an exact match, there's now
a 'fastpath' HSI major/minor scheme, where VFs and PFs that match in their
major number can co-exist even if their minor is different.
In order to accomadate this change some changes in the vf-start init flow
had to be made, as the VF start ramrod now has to be sent only after PF
learns which fastpath HSI its VF is requiring.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Yuval Mintz [Sat, 4 Jun 2016 05:20:16 +0000 (08:20 +0300)]
qed: Fix next-ptr chains for BE / 32-bit
Commit a91eb52abb50 ("qed: Revisit chain implementation") contains an
incorrect implementation for BE platforms, as device's regpairs containing
addresses are LE and they're not converted correctly when read back.
In addition, it raises a compilation warning for 32-bit platforms where
dma_addr_t is a 32-bit variable.
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Yuval Mintz [Fri, 3 Jun 2016 11:35:35 +0000 (14:35 +0300)]
qed: Initialize hardware for new protocols
RoCE and iSCSI would require some added/changed hw configuration in order
to properly run; The biggest single change being the requirement of
allocating and mapping host memory for several HW blocks that aren't being
used by qede [SRC, QM, TM, etc.].
In addition, whereas qede is only using context memory for HW blocks, the
new protocol would also require task memories to be added.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Yuval Mintz [Fri, 3 Jun 2016 11:35:34 +0000 (14:35 +0300)]
qed: Add iscsi/rdma personalities
This patch adds in the ecore 2 new personalities in addition to
QED_PCI_ETH - QED_PCI_ISCSI and QED_PCI_ETH_ROCE.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Yuval Mintz [Fri, 3 Jun 2016 11:35:33 +0000 (14:35 +0300)]
qed: Add common HSI for new protocols
This adds the qed portion of the RoCE & iSCSI firmware HSI,
as well as adding several new common HSI files which would be required
by both qed and qed* protocols.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Yuval Mintz [Fri, 3 Jun 2016 11:35:32 +0000 (14:35 +0300)]
qed: Revisit chain implementation
RoCE driver is going to need a 32-bit chain [current chain implementation
for qed* currently supports only 16-bit producer/consumer chains].
This patch adds said support, as well as doing other slight tweaks and
modifications to qed's chain API.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Yuval Mintz [Thu, 2 Jun 2016 07:23:29 +0000 (10:23 +0300)]
qed: Utilize FW 8.10.3.0
The New QED firmware contains several fixes, including:
- Wrong classification of packets in 4-port devices.
- Anti-spoof interoperability with encapsulated packets.
- Tx-switching of encapsulated packets.
It also slightly improves Tx performance of the device.
In addition, this firmware contains the necessary logic for
supporting iscsi & rdma, for which we plan on pushing protocol
drivers in the imminent future.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 24361996 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Mauricio Faria de Oliveira [Tue, 7 Jun 2016 23:13:08 +0000 (20:13 -0300)]
lpfc: fix oops in lpfc_sli4_scmd_to_wqidx_distr() from lpfc_send_taskmgmt()
The lpfc_sli4_scmd_to_wqidx_distr() function expects the scsi_cmnd
'lpfc_cmd->pCmd' not to be null, and point to the midlayer command.
That's not true in the .eh_(device|target|bus)_reset_handler path,
because lpfc_send_taskmgmt() sends commands not from the midlayer, so
does not set 'lpfc_cmd->pCmd'.
That is true in the .queuecommand path because lpfc_queuecommand()
stores the scsi_cmnd from midlayer in lpfc_cmd->pCmd; and lpfc_cmd is
stored by lpfc_scsi_prep_cmnd() in piocbq->context1 -- which is passed
to lpfc_sli4_scmd_to_wqidx_distr() as lpfc_cmd parameter.
This problem can be hit on SCSI EH, and immediately with sg_reset.
These 2 test-cases demonstrate the problem/fix with next-20160601.
Fixes: 8b0dff14164d ("lpfc: Add support for using block multi-queue") Cc: <stable@vger.kernel.org> # v4.2+ Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ashok Vairavan <ashok.vairavan@oracle.com>
(commit 5f009d3f8e6685fe8c6215082c1696a08b411220 of upstream)
The new queue limit is not used by the majority of block drivers, and
should be initialized to 0 for the driver's requested settings to be used.
Signed-off-by: Keith Busch <keith.busch@intel.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Joe Jin <joe.jin@oracle.com>
(commit 6b7e9cde49691e04314342b7dce90c67ad567fcc of upstream)
For historic reasons, io_opt is in bytes and max_sectors in block layer
sectors. This interface inconsistency is error prone and should be
fixed. But for 4.4--4.7 let's make the unit difference explicit via a
wrapper function.
Fixes: d0eb20a863ba ("sd: Optimal I/O size is in bytes, not sectors") Cc: stable@vger.kernel.org # 4.4+ Reported-by: Fam Zheng <famz@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Andrew Patterson <andrew.patterson@hpe.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Joe Jin <joe.jin@oracle.com>
(commit f08bb1e0dbdd0297258d0b8cd4dbfcc057e57b2a of upstream)
During revalidate we check whether device capacity has changed before we
decide whether to output disk information or not.
The check for old capacity failed to take into account that we scaled
sdkp->capacity based on the reported logical block size. And therefore
the capacity test would always fail for devices with sectors bigger than
512 bytes and we would print several copies of the same discovery
information.
Avoid scaling sdkp->capacity and instead adjust the value on the fly
when setting the block device capacity and generating fake C/H/S
geometry.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> Reported-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Joe Jin <joe.jin@oracle.com>
(commit d0eb20a863ba7dc1d3f4b841639671f134560be2 of upstream)
Commit ca369d51b3e1 ("block/sd: Fix device-imposed transfer length
limits") accidentally switched optimal I/O size reporting from bytes to
block layer sectors.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: ca369d51b3e1649be4a72addd6d6a168cfb3f537 Cc: stable@vger.kernel.org # 4.4+ Reviewed-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Joe Jin <joe.jin@oracle.com>
(commit 9c1d9c207bb800498347a2716da298043ee280c5 of upstream)
Eryu Guan reported that loading scsi_debug would fail. This turned out
to be caused by scsi_debug reporting an optimal I/O size of 32KB which
is smaller than the 64KB page size on the PowerPC system in question.
Add a check to ensure that we only use the device-reported OPTIMAL
TRANSFER LENGTH if it is bigger than or equal to the page cache size.
Reported-by: Eryu Guan <guaneryu@gmail.com> Reported-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Joe Jin <joe.jin@oracle.com>
(commit ca369d51b3e1649be4a72addd6d6a168cfb3f537 of upstream)
Commit 4f258a46346c ("sd: Fix maximum I/O size for BLOCK_PC requests")
had the unfortunate side-effect of removing an implicit clamp to
BLK_DEF_MAX_SECTORS for REQ_TYPE_FS requests in the block layer
code. This caused problems for some SMR drives.
Debugging this issue revealed a few problems with the existing
infrastructure since the block layer didn't know how to deal with
device-imposed limits, only limits set by the I/O controller.
- Introduce a new queue limit, max_dev_sectors, which is used by the
ULD to signal the maximum sectors for a REQ_TYPE_FS request.
- Ensure that max_dev_sectors is correctly stacked and taken into
account when overriding max_sectors through sysfs.
- Rework sd_read_block_limits() so it saves the max_xfer and opt_xfer
values for later processing.
- In sd_revalidate() set the queue's max_dev_sectors based on the
MAXIMUM TRANSFER LENGTH value in the Block Limits VPD. If this value
is not reported, fall back to a cap based on the CDB TRANSFER LENGTH
field size.
- In sd_revalidate(), use OPTIMAL TRANSFER LENGTH from the Block Limits
VPD--if reported and sane--to signal the preferred device transfer
size for FS requests. Otherwise use BLK_DEF_MAX_SECTORS.
- blk_limits_max_hw_sectors() is no longer used and can be removed.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93581 Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: sweeneygj@gmx.com Tested-by: Arzeets <anatol.pomozov@gmail.com> Tested-by: David Eisner <david.eisner@oriel.oxon.org> Tested-by: Mario Kicherer <dev@kicherer.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Conflicts:
drivers/scsi/sd.h
include/linux/blkdev.h
Adding opt_xfer_blocks and max_dev_sectors breaks kABI.
They will be added using by UEK_KABI_USE2() in a fix-up commit. Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Fix a very corner case when the port gets disconnected and the BFA and
FCS layers clean up references to the IT nexus. During this window if a
task management command is issued by the SCSI-ML and ends up referencing
a NULL itnim, it could lead to a crash.
James Smart [Thu, 31 Mar 2016 21:12:34 +0000 (14:12 -0700)]
lpfc: Update modified file copyrights
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 23762058
(cherry picked from commit 506115777af017bfc0968ee1c6aed024cdb6e43b) Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
James Smart [Thu, 31 Mar 2016 21:12:33 +0000 (14:12 -0700)]
lpfc: Fix interaction between fdmi_on and enable_SmartSAN
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 23762058
(cherry picked from commit 8663cbbe3ba0d8142faec48bbab0dc3482e3007d) Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
James Smart [Thu, 31 Mar 2016 21:12:32 +0000 (14:12 -0700)]
lpfc: Add support for SmartSAN 2.0
Revise versions to reflect SmartSAN 2.0 support
RDP updated to support additional descriptors:
Credit descriptor
Optical Element Data descriptors for Temperature, Voltage,
Bias current, TX power and TX power.
Optical Product Data descriptor.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 23762058
(cherry picked from commit 56204984761d80b973a0a534c42566ad78303766) Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
James Smart [Thu, 31 Mar 2016 21:12:31 +0000 (14:12 -0700)]
lpfc: Fix Device discovery failures during switch reboot test.
When the switch is rebooted, the lpfc driver fails to log
into the fabric, and Unexpected timeout message is seen.
Fix: Do not issue RegVFI if the FLOGI was internally aborted.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 23762058
(cherry picked from commit 342b59caa66240b670285d519fdfe2c44289b516) Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
James Smart [Thu, 31 Mar 2016 21:12:30 +0000 (14:12 -0700)]
lpfc: Utilize embedded CDB logic to minimize IO latency
Pass cmd iu payloads inline to adapter job structure rather than as
separate dma buffers.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 23762058 Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
James Smart [Thu, 31 Mar 2016 21:12:29 +0000 (14:12 -0700)]
lpfc: Fix crash when unregistering default rpi.
The default rpi completion handler does back to back puts to force the
removal of the ndlp. This ends up calling lpfc_unreg_rpi after the
reference count is at 0.
Fix: Check the reference count of the ndlp before getting the ref to
make sure we are not getting a reference on a removed object.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 23762058
(cherry picked from commit a6517db9006eb618dfde54f4bf6a9a8bc21e16e7) Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
James Smart [Thu, 31 Mar 2016 21:12:28 +0000 (14:12 -0700)]
lpfc: Fix DMA faults observed upon plugging loopback connector
Driver didn't program the REG_VFI mailbox correctly, giving the adapter
bad addresses.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 23762058
(cherry picked from commit ae09c765109293b600ba9169aa3d632e1ac1a843) Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
James Smart [Thu, 31 Mar 2016 21:12:27 +0000 (14:12 -0700)]
lpfc: Correct LOGO handling during login
After a link bounce, when a remote port issues a LOGO while a REGLOGIN
is pending on that port, the driver does not clean up the ndlp
structure. May result in stack traces in the console log.
Fix: Clear the NLP_REG_LOGIN_SEND flag on the ndlp in the routine
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 23762058
(cherry picked from commit de96e9c5b82801ea17558c271730fdc2aa5e7e77) Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Arnd Bergmann [Mon, 14 Mar 2016 14:29:44 +0000 (15:29 +0100)]
lpfc: fix misleading indentation
gcc-6 complains about the indentation of the lpfc_destroy_vport_work_array()
call in lpfc_online(), which clearly doesn't look right:
drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_online':
drivers/scsi/lpfc/lpfc_init.c:2880:3: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation]
lpfc_destroy_vport_work_array(phba, vports);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/lpfc/lpfc_init.c:2863:2: note: ...this 'if' clause, but it is not
if (vports != NULL)
^~
Looking at the patch that introduced this code, it's clear that the
behavior is correct and the indentation is wrong.
This fixes the indentation and adds curly braces around the previous
if() block for clarity, as that is most likely what caused the code
to be misindented in the first place.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 549e55cd2a1b ("[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list") Reviewed-by: Sebastian Herbszt <herbszt@gmx.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 23762058
(cherry picked from commit aeb6641f8ebdd61939f462a8255b316f9bfab707) Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Alan [Mon, 15 Feb 2016 19:11:56 +0000 (19:11 +0000)]
lpfc: fix missing zero termination in debugfs
If you feed 32 bytes in then the kstrtoull() doesn't receive a terminated
string so will run off the end.
Signed-off-by: Alan Cox <alan@linux.intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 23762058
(cherry picked from commit 0872774d8a319676dea7416e0cf85bec63eea0d0) Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Johannes Thumshirn [Wed, 20 Jan 2016 15:08:40 +0000 (16:08 +0100)]
lpfc: Remove redundant code block in lpfc_scsi_cmd_iocb_cmpl
This removes a redundant code block that will either be executed if the
ENABLE_FCP_RING_POLLING flag is set in phba->cfg_poll or not. The code
is just duplicated in both cases, hence we unify it again.
This probably is a left over from some sort of refactoring.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Sebastian Herbszt <herbszt@gmx.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 23762058
(cherry picked from commit 19db2307365231e798bb99324ed553bcada57913) Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Fixes: 969a619 ("qla2xxx: Add support for buffer to buffer credit value for ISP27XX.") Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
During hot swap of PCI device, there can be PCI error on device,
during normal driver unload. The race between normal driver unload and
driver unload due to PCI error, can lead to system crash.Fix is to check
if there is unload going on and allow that function to unload the driver.
When VP decoupling enabled, there could be a window where, FLOGI from
initiators can be dropped before VP0 is enabled, causing link level recovery.
Retry FLOGI to avoid link level recovery.
Chaitra P B [Fri, 6 May 2016 08:59:31 +0000 (14:29 +0530)]
mpt3sas: Used "synchronize_irq()"API to synchronize timed-out IO & TMs
Replaced mpt3sas_base_flush_reply_queues() with
mpt3sas_base_sync_reply_irqs(),as mpt3sas_base_flush_reply_queues()
skips over reply queues that are currently busy (i.e. being handled by
interrupt processing in another core). If a reply queue is busy, then
call to synchronize_irq()in mpt3sas_base_sync_reply_irqs()make sures the
other core has finished flushing the queue and completed any calls to
the mid-layer scsi_done() routine.
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit 5f0dfb7a9bcc8139958f59ecb9bbd7e738ae702d) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Chaitra P B [Fri, 6 May 2016 08:59:30 +0000 (14:29 +0530)]
mpt3sas: Set maximum transfer length per IO to 4MB for VDs
Set maximum transfer length per IO on RAID volumes to 4MB by setting
VD's queue's max_sector to 8192.
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit 6c197093847e8cdec844df39a373bfe1f9a1ac8a) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Chaitra P B [Fri, 6 May 2016 08:59:29 +0000 (14:29 +0530)]
mpt3sas: Updating mpt3sas driver version to 13.100.00.00
Bump mpt3sas driver version from 12.100.00.00 to 13.100.00.00
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit b2500d76a0dbaa8993cd6b43941d23d31a312831) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Chaitra P B [Fri, 6 May 2016 08:59:28 +0000 (14:29 +0530)]
mpt3sas: Fix initial Reference tag field for 4K PI drives.
Modified driver code to use scsi_prot_ref_tag() API instead of
scsi_get_lba(), while initializing reference tag field in the CDB.
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit 648512ccd7d42ccf761f515b7c0cb456a48c477a) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Chaitra P B [Fri, 6 May 2016 08:59:27 +0000 (14:29 +0530)]
mpt3sas: Handle active cable exception event
In-order to handle this 'MPI2_EVENT_ACTIVE_CABLE_EXCEPTION' event,
driver need to follow below steps,
1. Unmask the 'MPI2_EVENT_ACTIVE_CABLE_EXCEPTION' event,
so that FW can notify this event to host driver.
2. After receiving this event, add this event to AEN event queue,
for notifying this event to applications.
3. Then Print below message in kernel logs if the event data's reason
code is zero,
"Currently an active cable with ReceptacleID <ID_Value> cannot be powered
and devices connected to this active cable will not be seen. This active
cable requires <PowerValue_in_mW> of power"
This event is only for Intruder/Cutlass HBAs.
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit a470a51cd6481373cdf2b5934b1b9f7853688de9) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Chaitra P B [Fri, 6 May 2016 08:59:26 +0000 (14:29 +0530)]
mpt3sas: Update MPI header to 2.00.42
Updated MPI version and MPI header files.
ChangeList:
* Added SATADeviceWaitTime to SAS IO Unit Page 4
* Added EEDPObservedValue added to SCSI IO Reply message
* Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and
MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit 4fe6bc97efebdc5083aa749850928fad1740a60d) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Joe Lawrence [Mon, 18 Apr 2016 14:50:12 +0000 (10:50 -0400)]
mpt3sas - remove unused fw_event_work elements
Firmware events are queued up using the fw_event_work's struct work, not
its delayed_work member. The initial driver for SAS2 controllers had
handled firmware reset using the rescan barrier and was later redesigned
through "mpt2sas: [Resend] Host Reset code cleanup". The delayed_work
variables are now unused and may provoke CONFIG_DEBUG_OBJECTS_TIMERS
"assert_init not available" false warnings in
_scsih_fw_event_cleanup_queue.
Cleanup fw_event_work's unused entries, update its kerneldoc, and
update _scsih_fw_event_cleanup_queue accordingly.
Fixes: 146b16c8071f (mpt3sas: Refcount fw_events and fix unsafe list usage) Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit b8ac0cc78b56e798851f1435bc673761d3fb877e) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tina Ruchandani [Wed, 13 Apr 2016 07:01:40 +0000 (00:01 -0700)]
mpt3sas: Remove usage of 'struct timeval'
'struct timeval' will have its tv_sec value overflow on 32-bit systems
in year 2038 and beyond. This patch replaces the use of struct timeval
for computing mpi_request.TimeStamp, and instead uses ktime_t which
provides 64-bit seconds value. The timestamp computed remains
unaffected (milliseconds since Unix epoch).
Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit 23409bd4a8b051e28d0106c7a83f362617452098) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calvin Owens [Fri, 18 Mar 2016 19:45:42 +0000 (12:45 -0700)]
mpt3sas: Don't overreach ioc->reply_post[] during initialization
In _base_make_ioc_operational(), we walk ioc->reply_queue_list and pull
a pointer out of successive elements of ioc->reply_post[] for each entry
in that list if RDPQ is enabled.
Since the code pulls the pointer for the next iteration at the bottom of
the loop, it triggers the a KASAN dump on the final iteration:
Lars-Peter Clausen [Fri, 4 Mar 2016 10:15:07 +0000 (11:15 +0100)]
mpt3sas: Remove unnecessary synchronize_irq() before free_irq()
Calling synchronize_irq() right before free_irq() is quite useless. On
one hand the IRQ can easily fire again before free_irq() is entered, on
the other hand free_irq() itself calls synchronize_irq() internally (in
a race condition free way), before any state associated with the IRQ is
freed.
Patch was generated using the following semantic patch:
// <smpl>
@@
expression irq;
@@
-synchronize_irq(irq);
free_irq(irq, ...);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit 7f8b8f3fba55b345f9b6e3f55906bef6e29e354b) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suganath prabu Subramani [Thu, 18 Feb 2016 08:39:45 +0000 (14:09 +0530)]
mpt3sas: Free memory pools before retrying to allocate with different value.
Deallocate resources before reallocating of the same in retry_allocation
path of _base_allocate_memory_pools()
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit 8ff045c92708a595b7e39d68bdc0bd7edc08a073) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suganath prabu Subramani [Thu, 11 Feb 2016 09:32:55 +0000 (15:02 +0530)]
mpt3sas: Remove cpumask_clear for zalloc_cpumask_var and don't free free_cpu_mask_var before reply_q
Removed cpumask_clear as it is not required for zalloc_cpumask_var and
free free_cpumask_var before freeing reply_q.
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@broadcom.com> Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit da3cec2515f0094796679876ba17ba359331dbf6) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suganath prabu Subramani [Thu, 28 Jan 2016 06:37:07 +0000 (12:07 +0530)]
mpt3sas: Updating mpt3sas driver version to 12.100.00.00
Bump mpt3sas driver version from 09.102.00.00 to 12.100.00.00
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit d867b655eadf01fd5231ad9f41010c4d3b002a16) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suganath prabu Subramani [Thu, 28 Jan 2016 06:37:06 +0000 (12:07 +0530)]
mpt3sas: Fix for Asynchronous completion of timedout IO and task abort of timedout IO.
Track msix of each IO and use the same msix for issuing abort to timed
out IO. With this driver will process IO's reply first followed by TM.
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit 03d1fb3a65783979f23bd58b5a0387e6992d9e26) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suganath prabu Subramani [Thu, 28 Jan 2016 06:37:05 +0000 (12:07 +0530)]
mpt3sas: Updated MPI Header to 2.00.42
Updated MPI version and MPI header files.
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit 5c739b6157bd090942e5847ddd12bfb99cd4240d) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suganath prabu Subramani [Thu, 28 Jan 2016 06:37:04 +0000 (12:07 +0530)]
mpt3sas: Add support for configurable Chain Frame Size
Added support for configurable Chain Frame Size. Calculate the
Chain Message Frame size from the IOCMaxChainSegementSize (iocfacts).
Applicable only for mpt3sas/SAS3.0 HBA's.
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit ebb3024e2fd5578c800a5ae9165dd7f1a0844c11) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Module parameter to enable/disable configuring affinity hint for msix
vector. SMP affinity feature can be enabled/disabled by setting module
parameter "smp_affinity_enable" to 1/0. By default this feature is
enabled. (smp_affinity_enable = 1 enabled).
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit 64038301baed7d3d59a940ed8db311e27e8995d4) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suganath prabu Subramani [Thu, 28 Jan 2016 06:37:02 +0000 (12:07 +0530)]
mpt3sas: Make use of additional HighPriority credit message frames for sending SCSI IO's
Driver assumes HighPriority credit as part of Global credit. But,
Firmware treats HighPriority credit value and global cedits as two
different values. Changed host queue algorithm to treat global credits
and highPriority credits as two different values.
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit fd0331b32826dd440bdcad2ff4c1668e0224e625) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suganath prabu Subramani [Thu, 28 Jan 2016 06:37:01 +0000 (12:07 +0530)]
mpt3sas: Never block the Enclosure device
Never block the SEP device (i.e. Never invoke the
scsi_internal_device_block() API for SEP device) even for the delay not
responding events. Blocking the SEP device will create a deadlock while
adding any device to the OS.
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit 30158dc9bbc9d510780673a955cd4fdc36e1d366) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
1.Wrong size of argument is being passed
The size of struct being passed as an argument to memset func and area of
memory being pointed by an instance of struct in memset func should be of
same structure type.
2.Dereference null return value
3.Array compared against '0'
Check whether value pointed by particular index of an array is null or not
in "if" statement.
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit 869817f9e92e3b7911053e3c346560f20219e837) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suganath prabu Subramani [Thu, 28 Jan 2016 06:36:59 +0000 (12:06 +0530)]
mpt3sas: Used IEEE SGL instead of MPI SGL while framing a SMP Passthrough request message.
As driver was using MPI SGL while framing the SMP Passthrough request
message due to which firmware unable to post the Reply Data in the host
memory and timeout is observed for this SMP Passthrough request message
and so unable to perform phy disable operation.
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit ce61c574275651d964cf466469473726cb0e548f) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suganath prabu Subramani [Thu, 28 Jan 2016 06:36:58 +0000 (12:06 +0530)]
mpt3sas: Added support for high port count HBA variants.
Updated hardware description headers with MPI v2.6 and
mpt3sas_pci_table[] with vendor_ids, device_ids of Cutlass and Intruder
HBA which have support for 4 ports.
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit b130b0d56fa97ef17796314995a9dc5dda0edaa5) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tomas Henzl [Wed, 23 Dec 2015 13:21:47 +0000 (14:21 +0100)]
mpt3sas: A correction in unmap_resources
It might happen that we try to free an already freed pointer.
Reported-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Chaitra P B <chaitra.basappa@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit 5f985d88bac34e7f3b4403118eab072902a0b392) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Bottomley [Wed, 2 Dec 2015 21:36:58 +0000 (13:36 -0800)]
mpt3sas: fix Kconfig dependency problem for mpt2sas back compatibility
The non-PCI builds of the O day test project are failing:
On Thu, 2015-12-03 at 05:02 +0800, kbuild test robot wrote:
> warning: (SCSI_MPT2SAS) selects SCSI_MPT3SAS which has unmet direct
> dependencies (SCSI_LOWLEVEL && PCI && SCSI)
The problem is that select and depend don't interact because Kconfig doesn't
have a SAT solver, so depend picks up dependencies and select does onward
selects, but select doesn't pick up dependencies. To fix this, we need to add
the correct dependencies to the MPT2SAS option like this.
Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: b840c3627b6f4f856b333a14a72f8ed86da2f86c Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Orabug: 22529571
(cherry picked from commit 3ddda3e4c82dea58933bde8d0f6ef34470c360cb) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Martin K. Petersen [Tue, 1 Dec 2015 01:36:08 +0000 (20:36 -0500)]
mpt3sas: Add dummy Kconfig option for backwards compatibility
The mpt2sas driver was recently folded into mpt3sas to reduce code
duplication.
To avoid problems for people that only have CONFIG_SCSI_MPT2SAS in their
.config we introduce a dummy option that will select MPT3SAS if MPT2SAS
was previously enabled.
This is a temporary measure and we will deprecate this config option in
4.6.
Reported-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: James Bottomley <James.Bottomley@hansenpartnership.com> CC: Ingo Molnar <mingo@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit b840c3627b6f4f856b333a14a72f8ed86da2f86c) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sreekanth Reddy [Thu, 12 Nov 2015 18:10:37 +0000 (23:40 +0530)]
mpt3sas: Fix use sas_is_tlr_enabled API before enabling MPI2_SCSIIO_CONTROL_TLR_ON flag
Before enabling MPI2_SCSIIO_CONTROL_TLR_ON flag in MPI SCSI IO request
message, check whether TLR is enabled on the drive using
'sas_is_tlr_enabled' API.
Actually in the driver code, driver is using below API's
1. sas_enable_tlr() - to enable the TLR
2. sas_disable_tlr() - to disable the TLR
3. sas_is_tlr_enabled() - to check whether TLR is enabled or not.
but in scsih_qcmd() we have missed to use sas_is_tlr_enabled() API,
instead we checking for TLR bit from flag field of driver's 'struct
MPT3SAS_DEVIC' structure. which is corrected with this patch.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit 15de0de29f7ba5cce9699a8cc2344ca137beb25a) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stephen Rothwell [Fri, 13 Nov 2015 01:35:36 +0000 (12:35 +1100)]
mpt3sas: fix inline markers on non inline function declarations
After merging the scsi tree, today's linux-next build (powerpc
allyesconfig) failed like this:
In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:59:0:
drivers/scsi/mpt3sas/mpt3sas_scsih.c: In function '_scsih_io_done':
drivers/scsi/mpt3sas/mpt3sas_base.h:1414:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_get': function body not available
mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid);
^
drivers/scsi/mpt3sas/mpt3sas_scsih.c:4448:6: error: called from here
if (mpt3sas_scsi_direct_io_get(ioc, smid) &&
^
In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:59:0:
drivers/scsi/mpt3sas/mpt3sas_base.h:1416:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_set': function body not available
mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io);
^
drivers/scsi/mpt3sas/mpt3sas_scsih.c:4454:3: error: called from here
mpt3sas_scsi_direct_io_set(ioc, smid, 0);
^
In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:5
9:0:
drivers/scsi/mpt3sas/mpt3sas_base.h:1416:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_set': function body not available
mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io);
^
drivers/scsi/mpt3sas/mpt3sas_scsih.c:4454:3: error: called from here
mpt3sas_scsi_direct_io_set(ioc, smid, 0);
^
Presumably caused by commit
c84b06a48c4d ("mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Orabug: 22529571
(cherry picked from commit 0a5149ba02bdf75281b8bc94cf6dfa94c527fa6f) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sreekanth Reddy [Wed, 11 Nov 2015 12:00:41 +0000 (17:30 +0530)]
mpt3sas: Bump mpt3sas driver version to 09.102.00.00
Bump mpt3sas driver version to 09.102.00.00
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Orabug: 22529571
(cherry picked from commit abc01f7d54da8c77d650e730bcaef1c6c3982a5a) Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>