Dave Airlie [Fri, 30 Jul 2021 06:05:58 +0000 (16:05 +1000)]
Merge tag 'drm-msm-next-2021-07-28' of https://gitlab.freedesktop.org/drm/msm into drm-next
An early pull for v5.15 (there'll be more coming in a week or two),
consisting of the drm/scheduler conversion and a couple other small
series that one was based one. Mostly sending this now because IIUC
danvet wanted it in drm-next so he could rebase on it. (Daniel, if
you disagree then speak up, and I'll instead include this in the main
pull request once that is ready.)
This also has a core patch to drop drm_gem_object_put_locked() now
that the last use of it is removed.
Dave Airlie [Fri, 30 Jul 2021 04:51:22 +0000 (14:51 +1000)]
Merge tag 'drm-misc-next-2021-07-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
- Add modifiers for arm fixed rate compression.
Cross-subsystem Changes:
- Assorted dt binding fixes.
- Convert ssd1307fb to json-schema.
- Update a lot of irc channels to point to OFTC, as everyone moved there.
- Fix the same divide by zero for asilantfb, kyro, rivafb.
Core Changes:
- Document requirements for new atomic properties.
- Add drm_gem_fb_(begin/end)_cpu_access helpers, and use them in some drivers.
- Document drm_property_enum.value for bitfields.
- Add explicit _NO_ for MIPI_DSI flags that disable features.
- Assorted documentation fixes.
- Update fb_damage handling, and move drm_plane_enable_fb_damage_clips to core.
- Add logging and docs to RMFB ioctl.
- Assorted small fixes to dp_mst, master handling.
- Clarify drm lease usage.
Driver Changes:
- Assorted small fixes to panfrost, hibmc, bridge/nwl-dsi, rockchip, vc4.
- More drm -> linux irq conversions.
- Add support for some Logic Technologies and Multi-Inno panels.
- Expose phy-functionality for drm/rockchip, to allow controlling from the media subsystem.
- Add support for 2 AUO panels.
- Add damage handling to ssd1307fb.
- Improve FIFO handling on mxsfb.
- Assorted small fixes to vmwgfx, and bump version to 2.19 for the new ioctls.
- Improve sony acx424akp backlight handling.
Maxime Ripard [Wed, 7 Jul 2021 09:36:32 +0000 (11:36 +0200)]
drm/vc4: hdmi: Remove unused struct
Commit 91e99e113929 ("drm/vc4: hdmi: Register HDMI codec") removed the
references to the vc4_hdmi_audio_component_drv structure, but not the
structure itself resulting in a warning. Remove it.
Maxime Ripard [Wed, 7 Jul 2021 09:36:31 +0000 (11:36 +0200)]
drm/vc4: hdmi: Remove redundant variables
The vc4_hdmi_audio_prepare function and the functions it's calling have
in several occurences multiple dereferences of either the sample rate or
the number of channels.
It turns out that these variables are also passed through the hdmi codec
parameters structure. Convert all the users to use this structure, and
if it's used multiple times use a variable to store it instead of
dereferencing it every time.
We make the following changes to the documentation of drm leases to
make it easier to reason about their usage. In particular, we clarify
the lifetime and locking rules of lease fields in drm_master:
1. Make it clear that &drm_device.mode_config.idr_mutex protects the
lease idr and list structures for drm_master. The lessor field itself
doesn't need to be protected as it doesn't change after it's set in
drm_lease_create.
2. Add descriptions for the lifetime of lessors and leases.
3. Add an overview DOC: section in drm-uapi.rst that defines the
terminology for drm leasing, and explains how leases work and why
they're used.
This converts the internal backlight in the Sony ACX424AKP
driver to do it the canonical way:
- Assign the panel->backlight during probe.
- Let the panel framework handle the backlight.
- Make the backlight .set_brightness() turn the backlight
off completely if blank.
- Fix some dev_err_probe() use cases along the way.
Inside drm_is_current_master, using the outer drm_device.master_mutex
to protect reads of drm_file.master makes the function prone to creating
lock hierarchy inversions. Instead, we can use the
drm_file.master_lookup_lock that sits at the bottom of the lock
hierarchy.
drm/vmwgfx: Be a lot more flexible with MOB limits
The code was trying to keep a strict limit on the amount of mob
memory that was used in the guest by making it match the host
settings. There's technically no reason to do that (guests can
certainly use more than the host can have resident in renderers
at the same time).
In particular this is problematic because our userspace is not
great at handling OOM conditions and running out of MOB space
results in GL apps crashing, e.g. gnome-shell likes to allocate
huge surfaces (~61MB for the desktop on 2560x1600 with two workspaces)
and running out of memory there means that the gnome-shell crashes
on startup taking us back to the login and resulting in a system
where one can not login in graphically anymore.
Instead of letting the userspace crash we can extend available
MOB space, we just don't want to use all of the RAM for graphics,
so we're going to limit it to half of RAM.
With the addition of some extra logging this should make the
"guest has been configured with not enough graphics memory"
errors a lot easier to diagnose in cases where the automatic
expansion of MOB space fails.
The code was using the old DRM logging functions, which made it
hard to figure out what was coming from vmwgfx. The newer logging
helpers include the driver name in the logs and make it explicit
which driver they're coming from. This allows us to standardize
our logging a bit and clean it up in the process.
vmwgfx is a little special because technically the hardware it's
running on can be anything from the last 12 years or so which is
why we need to include capabilities in the logs in the first
place or otherwise we'd have no way of knowing what were
the capabilities of the platform the guest was running in.
The macro has been accounting for DRM_COMMAND_BASE for a long time
now so there's no reason to still be duplicating it. Plus we were
leaving the name undefined which meant that all the DRM ioctl
warnings/errors were always listing "null" ioctl at the culprit.
This fixes the undefined ioctl name and removes duplicated code.
Rob Clark [Wed, 28 Jul 2021 01:06:18 +0000 (18:06 -0700)]
drm/msm/gem: Mark active before pinning
Mark all the bos in the submit as active, before pinning, to prevent
evicting a buffer in the same submit to make room for a buffer earlier
in the table.
Rob Clark [Wed, 28 Jul 2021 01:06:17 +0000 (18:06 -0700)]
drm/msm: Utilize gpu scheduler priorities
The drm/scheduler provides additional prioritization on top of that
provided by however many number of ringbuffers (each with their own
priority level) is supported on a given generation. Expose the
additional levels of priority to userspace and map the userspace
priority back to ring (first level of priority) and schedular priority
(additional priority levels within the ring).
Rob Clark [Wed, 28 Jul 2021 01:06:15 +0000 (18:06 -0700)]
drm/msm: Drop submit bo_list
This was only used to detect userspace including the same bo multiple
times in a submit. But ww_mutex can already tell us this.
When we drop struct_mutex around the submit ioctl, we'd otherwise need
to lock the bo before adding it to the bo_list. But since ww_mutex can
already tell us this, it is simpler just to remove the bo_list.
Rob Clark [Wed, 28 Jul 2021 01:06:14 +0000 (18:06 -0700)]
drm/msm: Conversion to drm scheduler
For existing adrenos, there is one or more ringbuffer, depending on
whether preemption is supported. When preemption is supported, each
ringbuffer has it's own priority. A submitqueue (which maps to a
gl context or vk queue in userspace) is mapped to a specific ring-
buffer at creation time, based on the submitqueue's priority.
Each ringbuffer has it's own drm_gpu_scheduler. Each submitqueue
maps to a drm_sched_entity. And each submit maps to a drm_sched_job.
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/4 Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20210728010632.2633470-10-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
Laurent Pinchart [Mon, 25 May 2020 03:18:01 +0000 (06:18 +0300)]
drm: rcar-du: Use drm_bridge_connector_init() helper
Use the drm_bridge_connector_init() helper to create a drm_connector for
each output, instead of relying on the bridge drivers doing so. Attach
the bridges with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag to instruct
them not to create a connector.
drm: rcar-du: lvds: Convert to DRM panel bridge helper
Replace the manual panel handling with usage of the DRM panel bridge
helper. This simplifies the driver, and brings support for
DRM_BRIDGE_ATTACH_NO_CONNECTOR as an added bonus.
Laurent Pinchart [Thu, 14 May 2020 01:03:07 +0000 (04:03 +0300)]
drm: bridge: dw-hdmi: Attach to next bridge if available
On all platforms except i.MX and Rockchip, the dw-hdmi DT bindings
require a video output port connected to an HDMI sink (most likely an
HDMI connector, in rare cases another bridges converting HDMI to another
protocol). For those platforms, retrieve the next bridge and attach it
from the dw-hdmi bridge attach handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Laurent Pinchart [Tue, 23 Mar 2021 21:50:08 +0000 (23:50 +0200)]
drm/bridge: Centralize error message when bridge attach fails
Being informed of a failure to attach a bridge is useful, and many
drivers prints an error message in that case. Move the message to
drm_bridge_attach() to avoid code duplication.
Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Laurent Pinchart [Tue, 23 Mar 2021 00:09:53 +0000 (02:09 +0200)]
drm: rcar-du: Shutdown the display on remove
When the device is unbound from the driver (the DU being a platform
device, this occurs either when removing the DU module, or when
unbinding the device manually through sysfs), the display may be active.
Make sure it gets shut down.
Laurent Pinchart [Tue, 23 Mar 2021 00:09:53 +0000 (02:09 +0200)]
drm: rcar-du: Don't put reference to drm_device in rcar_du_remove()
The reference to the drm_device that was acquired by
devm_drm_dev_alloc() is released automatically by the devres
infrastructure. It must not be released manually, as that causes a
reference underflow..
Laurent Pinchart [Tue, 23 Mar 2021 00:09:53 +0000 (02:09 +0200)]
drm: rcar-du: Shutdown the display on system shutdown
When the system shuts down or warm reboots, the display may be active,
with the hardware accessing system memory. Upon reboot, the DDR will not
be accessible, which may cause issues.
Implement the platform_driver .shutdown() operation and shut down the
display to fix this.
Colin Ian King [Thu, 4 Feb 2021 18:33:44 +0000 (18:33 +0000)]
drm/bridge: make a const array static, makes object smaller
Don't populate the const array frs_limits on the stack but instead make
it static. Makes the object code smaller by 128 bytes:
Before:
text data bss dec hex filename
24845 7440 64 32349 7e5d ./drivers/gpu/drm/bridge/tc358768.o
After:
text data bss dec hex filename
24749 7408 64 32221 7ddd ./drivers/gpu/drm/bridge/tc358768.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Rob Clark [Wed, 28 Jul 2021 01:06:12 +0000 (18:06 -0700)]
drm/msm: Track "seqno" fences by idr
Previously the (non-fd) fence returned from submit ioctl was a raw
seqno, which is scoped to the ring. But from UABI standpoint, the
ioctls related to seqno fences all specify a submitqueue. We can
take advantage of that to replace the seqno fences with a cyclic idr
handle.
This is in preperation for moving to drm scheduler, at which point
the submit ioctl will return after queuing the submit job to the
scheduler, but before the submit is written into the ring (and
therefore before a ring seqno has been assigned). Which means we
need to replace the dma_fence that userspace may need to wait on
with a scheduler fence.
Rob Clark [Wed, 28 Jul 2021 01:06:11 +0000 (18:06 -0700)]
drm/msm: Consolidate submit bo state
Move all the locked/active/pinned state handling to msm_gem_submit.c.
In particular, for drm/scheduler, we'll need to do all this before
pushing the submit job to the scheduler. But while we're at it we can
get rid of the dupicate pin and refcnt.
Rob Clark [Wed, 28 Jul 2021 01:06:09 +0000 (18:06 -0700)]
drm: Drop drm_gem_object_put_locked()
Now that no one is using it, remove it.
Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://lore.kernel.org/r/20210728010632.2633470-5-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Mon, 26 Jul 2021 14:46:50 +0000 (07:46 -0700)]
drm/msm: Devfreq tuning
This adds a few things to try and make frequency scaling better match
the workload:
1) Longer polling interval to avoid whip-lashing between too-high and
too-low frequencies in certain workloads, like mobile games which
throttle themselves to 30fps.
Previously our polling interval was short enough to let things
ramp down to minimum freq in the "off" frame, but long enough to
not react quickly enough when rendering started on the next frame,
leading to uneven frame times. (Ie. rather than a consistent 33ms
it would alternate between 16/33/48ms.)
2) Awareness of when the GPU is active vs idle. Since we know when
the GPU is active vs idle, we can clamp the frequency down to the
minimum while it is idle. (If it is idle for long enough, then
the autosuspend delay will eventually kick in and power down the
GPU.)
Since devfreq has no knowledge of powered-but-idle, this takes a
small bit of trickery to maintain a "fake" frequency while idle.
This, combined with the longer polling period allows devfreq to
arrive at a reasonable "active" frequency, while still clamping
to minimum freq when idle to reduce power draw.
3) Boost. Because simple_ondemand needs to see a certain threshold
of busyness to ramp up, we could end up needing multiple polling
cycles before it reacts appropriately on interactive workloads
(ex. scrolling a web page after reading for some time), on top
of the already lengthened polling interval, when we see a idle
to active transition after a period of idle time we boost the
frequency that we return to.
Rob Clark [Mon, 26 Jul 2021 14:43:58 +0000 (07:43 -0700)]
drm/msm: Signal fences sooner
Nothing we do to in update_fences() can't be done in an atomic context,
so move this into the GPU's irq context to reduce latency (and call
dma_fence_signal() so we aren't relying on dma_fence_is_signaled() which
would defeat the purpose).
Rob Clark [Mon, 26 Jul 2021 14:43:57 +0000 (07:43 -0700)]
drm/msm: Let fences read directly from memptrs
Let dma_fence::signaled, etc, read directly from the address that the hw
is writing with updated completed fence seqno, so we can potentially
notice that the fence is signaled sooner.
drm/dp_mst: Fix return code on sideband message failure
Commit 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing +
selftests") added some debug code for sideband message tracing. But
it seems to have unintentionally changed the behavior on sideband message
failure. It catches and returns failure only if DRM_UT_DP is enabled.
Otherwise it ignores the error code and returns success. So on an MST
unplug, the caller is unaware that the clear payload message failed and
ends up waiting for 4 seconds for the response. Fixes the issue by
returning the proper error code.
Changes in V2:
-- Revise commit text as review comment
-- add Fixes text
Changes in V3:
-- remove "unlikely" optimization
Fixes: 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing + selftests") Cc: <stable@vger.kernel.org> # v5.5+ Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1625585434-9562-1-git-send-email-khsieh@codeaurora.org
Marek Vasut [Sun, 20 Jun 2021 22:49:46 +0000 (00:49 +0200)]
drm: mxsfb: Clear FIFO_CLEAR bit
Make sure the FIFO_CLEAR bit is latched in when configuring the
controller, so that the FIFO is really cleared. And then clear
the FIFO_CLEAR bit, since it is not self-clearing.
Fixes: 45d59d704080 ("drm: Add new driver for MXSFB controller") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Abrecht <public@danielabrecht.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # i.Core MX8MM Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210620224946.189524-1-marex@denx.de
Marek Vasut [Mon, 26 Jul 2021 19:44:57 +0000 (21:44 +0200)]
drm: mxsfb: Use bus_format from the nearest bridge if present
In case there is a bridge connected to the LCDIF, use bus_format
from the bridge, otherwise behave as before and use bus_format
from the connector. This way, even if there are multiple bridges
in the display pipeline, the LCDIF will use the correct format.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Abrecht <public@danielabrecht.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210726194457.341696-1-marex@denx.de
Marek Vasut [Sun, 20 Jun 2021 22:47:59 +0000 (00:47 +0200)]
drm: mxsfb: Increase number of outstanding requests on V4 and newer HW
In case the DRAM is under high load, the MXSFB FIFO might underflow
and that causes visible artifacts. This could be triggered on i.MX8MM
using e.g. "$ memtester 128M" on a device with 1920x1080 panel. The
first "Stuck Address" test of the memtester will completely corrupt
the image on the panel and leave the MXSFB FIFO in odd state.
To avoid this underflow, increase number of outstanding requests to
DRAM from 2 to 16, which is the maximum. This mitigates the issue
and it can no longer be triggered.
Fixes: 45d59d704080 ("drm: Add new driver for MXSFB controller") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Abrecht <public@danielabrecht.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210620224759.189351-1-marex@denx.de
Marek Vasut [Sun, 20 Jun 2021 22:47:01 +0000 (00:47 +0200)]
drm: mxsfb: Enable recovery on underflow
There is some sort of corner case behavior of the controller,
which could rarely be triggered at least on i.MX6SX connected
to 800x480 DPI panel and i.MX8MM connected to DPI->DSI->LVDS
bridged 1920x1080 panel (and likely on other setups too), where
the image on the panel shifts to the right and wraps around.
This happens either when the controller is enabled on boot or
even later during run time. The condition does not correct
itself automatically, i.e. the display image remains shifted.
It seems this problem is known and is due to sporadic underflows
of the LCDIF FIFO. While the LCDIF IP does have underflow/overflow
IRQs, neither of the IRQs trigger and neither IRQ status bit is
asserted when this condition occurs.
All known revisions of the LCDIF IP have CTRL1 RECOVER_ON_UNDERFLOW
bit, which is described in the reference manual since i.MX23 as
"
Set this bit to enable the LCDIF block to recover in the next
field/frame if there was an underflow in the current field/frame.
"
Enable this bit to mitigate the sporadic underflows.
Fixes: 45d59d704080 ("drm: Add new driver for MXSFB controller") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Abrecht <public@danielabrecht.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210620224701.189289-1-marex@denx.de
Currently, each screen update triggers an I2C transfer of all screen
data, up to 1 KiB of data for a 128x64 display, which takes at least 20
ms in Fast mode.
Reduce the amount of transferred data by only updating the rectangle
that changed. Remove the calls to ssd1307fb_set_col_range() and
ssd1307fb_set_page_range() during initialization, as
ssd1307fb_update_rect() now takes care of that.
Note that for now the optimized operation is only used for fillrect,
copyarea, and imageblit, which are used by fbcon.
Simplify the nested loops to handle conversion from linear frame buffer
to ssd1307 page layout:
1. Move last page handling one level up, as the value of "m" is the
same inside a page,
2. array->data[] is filled linearly, so there is no need to
recalculate array_idx over and over again; a simple increment is
sufficient.
Daniel Vetter [Fri, 23 Jul 2021 08:34:57 +0000 (10:34 +0200)]
drm/plane: Move drm_plane_enable_fb_damage_clips into core
We're trying to have a fairly strict split between core functionality
that defines the uapi, including the docs, and the helper functions to
implement it.
Move drm_plane_enable_fb_damage_clips and associated kerneldoc into
drm_plane from drm_damage_helper.c to fix this.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210723083457.696939-3-daniel.vetter@ffwll.ch
Daniel Vetter [Fri, 23 Jul 2021 08:34:56 +0000 (10:34 +0200)]
drm/plane: check that fb_damage is set up when used
There's two stages of manual upload/invalidate displays:
- just handling dirtyfb and uploading the entire fb all the time
- looking at damage clips
In the latter case we support it through fbdev emulation (with
fb_defio), atomic property, and with the dirtfy clip rects.
Make sure at least the atomic property is set up as the main official
interface for this. Ideally we'd also check that
drm_atomic_helper_dirtyfb() is used and that fbdev defio is set up,
but that's quite a bit harder to do. Ideas very much welcome.
From a cursor audit drivers seem to be getting this right mostly, but
better to make sure. At least no one is bypassing the accessor
function.
v2:
- use drm_warn_once with a meaningful warning string (José)
- don't splat in the atomic check code for everyone (intel-gfx-ci)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (v1) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210723083457.696939-2-daniel.vetter@ffwll.ch
It's not used. Drivers should instead use the helpers anyway.
Currently both vbox and i915 hand-roll this and it's not the greatest.
vbox looks buggy, and i915 does a bit much that helpers would take
care of I think.
Also improve the kerneldocs while we're at it.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210723083457.696939-1-daniel.vetter@ffwll.ch
Randy Dunlap [Tue, 27 Jul 2021 05:04:47 +0000 (22:04 -0700)]
efi: sysfb_efi: fix build when EFI is not set
When # CONFIG_EFI is not set, there are 2 definitions of
sysfb_apply_efi_quirks(). The stub from sysfb.h should be used
and the __init function from sysfb_efi.c should not be used.
../drivers/firmware/efi/sysfb_efi.c:337:13: error: redefinition of ‘sysfb_apply_efi_quirks’
__init void sysfb_apply_efi_quirks(struct platform_device *pd)
^~~~~~~~~~~~~~~~~~~~~~
In file included from ../drivers/firmware/efi/sysfb_efi.c:26:0:
../include/linux/sysfb.h:65:20: note: previous definition of ‘sysfb_apply_efi_quirks’ was here
static inline void sysfb_apply_efi_quirks(struct platform_device *pd)
^~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches") Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: linux-efi@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Mark Brown <broonie@kernel.org> Cc: linux-next@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210727050447.7339-1-rdunlap@infradead.org
drivers/firmware: fix SYSFB depends to prevent build failures
The Generic System Framebuffers support is built when the COMPILE_TEST
option is enabled. But this wrongly assumes that all the architectures
declare a struct screen_info.
This is true for most architectures, but at least the following do not:
arc, m68k, microblaze, openrisc, parisc and s390.
By attempting to make this compile testeable on all architectures, it
leads to linking errors as reported by the kernel test robot for parisc:
All errors (new ones prefixed by >>):
hppa-linux-ld: drivers/firmware/sysfb.o: in function `sysfb_init':
(.init.text+0x24): undefined reference to `screen_info'
>> hppa-linux-ld: (.init.text+0x28): undefined reference to `screen_info'
To prevent these errors only allow sysfb to be built on systems that are
going to need it, which are x86 BIOS and EFI.
The EFI Kconfig symbol is used instead of (ARM || ARM64 || RISC) because
some of these architectures only declare a struct screen_info if EFI is
enabled. And also, because the SYSFB code is only used for EFI on these
architectures. For !EFI the "simple-framebuffer" device is registered by
OF when parsing the Device Tree Blob (if a DT node for this was defined).
Nicolas Boichat [Tue, 27 Jul 2021 01:45:21 +0000 (09:45 +0800)]
drm/dsi: Add _NO_ to MIPI_DSI_* flags disabling features
Many of the DSI flags have names opposite to their actual effects,
e.g. MIPI_DSI_MODE_EOT_PACKET means that EoT packets will actually
be disabled. Fix this by including _NO_ in the flag names, e.g.
MIPI_DSI_MODE_NO_EOT_PACKET.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@samsung.com> Reviewed-by: Xin Ji <xji@analogixsemi.com> # anx7625.c Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> # msm/dsi Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727094435.v3.1.I629b2366a6591410359c7fcf6d385b474b705ca2@changeid
Add vendor prefix for Shenzhen QiShenglong Industrialist Co., Ltd.
QiShenglong is a Chinese manufacturer of handheld gaming consoles, most of
which run (very old) versions of Linux.
QiShenglong is known as Hamy.
Zheyu Ma [Mon, 26 Jul 2021 10:03:55 +0000 (10:03 +0000)]
video: fbdev: riva: Error out if 'pixclock' equals zero
The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of 'pixclock',
it may cause divide error.
Fix this by checking whether 'pixclock' is zero first.
Zheyu Ma [Mon, 26 Jul 2021 10:03:54 +0000 (10:03 +0000)]
video: fbdev: kyro: Error out if 'pixclock' equals zero
The userspace program could pass any values to the driver through
ioctl() interface. if the driver doesn't check the value of 'pixclock',
it may cause divide error because the value of 'lineclock' and
'frameclock' will be zero.
Fix this by checking whether 'pixclock' is zero in kyrofb_check_var().
Zheyu Ma [Mon, 26 Jul 2021 10:03:53 +0000 (10:03 +0000)]
video: fbdev: asiliantfb: Error out if 'pixclock' equals zero
The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of 'pixclock',
it may cause divide error.
Fix this by checking whether 'pixclock' is zero first.
Like many free software projects, freedesktop.org issued a non-binding
recommendation for projects to migrate from Freenode to OFTC [1]. As
such, freedesktop.org entries in the MAINTAINERS file are out-of-date as
the respective channels have moved. Update the file to point to the
right network.
v2: Correct typo in commit message pointed out by Lukas and Jonathan.
Add Hector's ack.
smpboot: fix duplicate and misplaced inlining directive
gcc doesn't care, but clang quite reasonably pointed out that the recent
commit e9ba16e68cce ("smpboot: Mark idle_init() as __always_inlined to
work around aggressive compiler un-inlining") did some really odd
things:
which not only has that duplicate inlining specifier, but the new
__always_inline was put in the wrong place of the function definition.
We put the storage class specifiers (ie things like "static" and
"extern") first, and the type information after that. And while the
compiler may not care, we put the inline specifier before the types.
So it should be just
static __always_inline void idle_init(unsigned int cpu)
Merge tag 'timers-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of timer related fixes:
- Plug a race between rearm and process tick in the posix CPU timers
code
- Make the optimization to avoid recalculation of the next timer
interrupt work correctly when there are no timers pending"
* tag 'timers-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix get_next_timer_interrupt() with no timers pending
posix-cpu-timers: Fix rearm racing against process tick
Merge tag 'locking-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 jump label fix from Thomas Gleixner:
"A single fix for jump labels to prevent the compiler from agressive
un-inlining which results in a section mismatch"
* tag 'locking-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_labels: Mark __jump_label_transform() as __always_inlined to work around aggressive compiler un-inlining
Merge tag 'efi-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
"A set of EFI fixes:
- Prevent memblock and I/O reserved resources to get out of sync when
EFI memreserve is in use.
- Don't claim a non-existing table is invalid
- Don't warn when firmware memory is already reserved correctly"
* tag 'efi-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/mokvar: Reserve the table only if it is in boot services data
efi/libstub: Fix the efi_load_initrd function description
firmware/efi: Tell memblock about EFI iomem reservations
efi/tpm: Differentiate missing and invalid final event log table.
Merge tag 'core-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fix from Thomas Gleixner:
"A single update for the boot code to prevent aggressive un-inlining
which causes a section mismatch"
* tag 'core-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smpboot: Mark idle_init() as __always_inlined to work around aggressive compiler un-inlining
Heiko Stuebner [Wed, 10 Feb 2021 11:10:17 +0000 (12:10 +0100)]
drm/rockchip: dsi: add ability to work as a phy instead of full dsi
SoCs like the rk3288 and rk3399 have 3 mipi dphys on them. One is TX-
only, one is RX-only and one can be configured to do either TX or RX.
The RX phy is statically connected to the first Image Signal Processor,
the TX phy is statically connected to the first DSI controller and
the TXRX phy is connected to both the second DSI controller as well
as the second ISP.
The RX dphy is controlled externally through registers in the "General
Register Files", while the other two are controlled through the
"Configuration and Test Interface" inside their DSI controller's
io-memory area.
The Rockchip dw-dsi controller already controls these dphys for the
TX case in the driver, but when we want to also allow configuration
for RX to the ISP from the media subsystem we need to expose phy-
functionality instead.
So add a bit of infrastructure to allow the dsi driver to work as a
phy and make sure it can be only one or the other at a time.
Similarly as the dsi-controller will be part of the drm-graph when
active, add an empty component to the drm-graph when in phy-mode
to make the rest of the drm-graph not wait for it.
The Rockchip DSI controller on some SoCs also controls a bidrectional
dphy, which would be connected to an Image Signal Processor as a phy
in the rx configuration.
So allow a #phy-cells property for the dsi controller.
drm/bridge: nwl-dsi: Avoid potential multiplication overflow on 32-bit
As nwl_dsi.lanes is u32, and NSEC_PER_SEC is 1000000000L, the second
multiplication in
dsi->lanes * 8 * NSEC_PER_SEC
will overflow on a 32-bit platform. Fix this by making the constant
unsigned long long, forcing 64-bit arithmetic.
As iMX8 is arm64, this driver is currently used on 64-bit platforms
only, where long is 64-bit, so this cannot happen. But the issue will
start to happen when the driver is reused for a 32-bit SoC (e.g.
i.MX7ULP), or when code is copied for a new driver.
Thomas Zimmermann [Tue, 20 Jul 2021 08:09:41 +0000 (10:09 +0200)]
drm/shmobile: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
v3:
* return error if (ret < 0) (Geert)
* remove duplicate error message (Geert)
v2:
* handle errors in platform_get_irq() (Geert, Sergei)
* store IRQ number in struct shmob_drm_device (Laurent)
Merge tag '5.14-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Five cifs/smb3 fixes, including a DFS failover fix, two fallocate
fixes, and two trivial coverity cleanups"
* tag '5.14-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix fallocate when trying to allocate a hole.
CIFS: Clarify SMB1 code for POSIX delete file
CIFS: Clarify SMB1 code for POSIX Create
cifs: support share failover when remounting
cifs: only write 64kb at a time when fallocating a small region of a file
Merge tag 'riscv-for-linus-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- properly set the memory size, which fixes 32-bit systems
- allow initrd to load anywhere in memory, rather that restricting it
to the first 256MiB
- fix the 'mem=' parameter on 64-bit systems to properly account for
the maximum supported memory now that the kernel is outside the
linear map
- avoid installing mappings into the last 4KiB of memory, which
conflicts with error values
- avoid the stack from being freed while it is being walked
- a handful of fixes to the new copy to/from user routines
* tag 'riscv-for-linus-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: __asm_copy_to-from_user: Fix: Typos in comments
riscv: __asm_copy_to-from_user: Remove unnecessary size check
riscv: __asm_copy_to-from_user: Fix: fail on RV32
riscv: __asm_copy_to-from_user: Fix: overrun copy
riscv: stacktrace: pin the task's stack in get_wchan
riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUE
riscv: Make sure the linear mapping does not use the kernel mapping
riscv: Fix memory_limit for 64-bit kernel
RISC-V: load initrd wherever it fits into memory
riscv: Fix 32-bit RISC-V boot failure
Commit 71f642833284 ("ACPI: utils: Fix reference counting in
for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer
that was possibly NULL. That fails miserably, because that helper
inline function is not set up to handle that case.
Just make acpi_dev_put() silently accept a NULL pointer, rather than
calling down to put_device() with an invalid offset off that NULL
pointer.
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, all in drivers, all of which can lead to user visible
problems in certain situations"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: Fix NULL dereference on XCOPY completion
scsi: mpt3sas: Transition IOC to Ready state during shutdown
scsi: target: Fix protect handling in WRITE SAME(32)
scsi: iscsi: Fix iface sysfs attr detection
Merge tag 'io_uring-5.14-2021-07-24' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Fix a memory leak due to a race condition in io_init_wq_offload
(Yang)
- Poll error handling fixes (Pavel)
- Fix early fdput() regression (me)
- Don't reissue iopoll requests off release path (me)
- Add a safety check for io-wq queue off wrong path (me)
* tag 'io_uring-5.14-2021-07-24' of git://git.kernel.dk/linux-block:
io_uring: explicitly catch any illegal async queue attempt
io_uring: never attempt iopoll reissue from release path
io_uring: fix early fdput() of file
io_uring: fix memleak in io_init_wq_offload()
io_uring: remove double poll entry on arm failure
io_uring: explicitly count entries for poll reqs
Merge tag 'block-5.14-2021-07-24' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request (Christoph):
- tracing fix (Keith Busch)
- fix multipath head refcounting (Hannes Reinecke)
- Write Zeroes vs PI fix (me)
- drop a bogus WARN_ON (Zhihao Cheng)
- Increase max blk-cgroup policy size, now that mq-deadline
uses it too (Oleksandr)
* tag 'block-5.14-2021-07-24' of git://git.kernel.dk/linux-block:
nvme: set the PRACT bit when using Write Zeroes with T10 PI
nvme: fix nvme_setup_command metadata trace event
nvme: fix refcounting imbalance when all paths are down
nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING
block: increase BLKCG_MAX_POLS
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mpc: Poll for MCF
misc: eeprom: at24: Always append device id even if label property is set.
Merge misc mm fixes from Andrew Morton:
"15 patches.
VM subsystems affected by this patch series: userfaultfd, kfence,
highmem, pagealloc, memblock, pagecache, secretmem, pagemap, and
hugetlbfs"
* akpm:
hugetlbfs: fix mount mode command line processing
mm: fix the deadlock in finish_fault()
mm: mmap_lock: fix disabling preemption directly
mm/secretmem: wire up ->set_page_dirty
writeback, cgroup: do not reparent dax inodes
writeback, cgroup: remove wb from offline list before releasing refcnt
memblock: make for_each_mem_range() traverse MEMBLOCK_HOTPLUG regions
mm: page_alloc: fix page_poison=1 / INIT_ON_ALLOC_DEFAULT_ON interaction
mm: use kmap_local_page in memzero_page
mm: call flush_dcache_page() in memcpy_to_page() and memzero_page()
kfence: skip all GFP_ZONEMASK allocations
kfence: move the size check to the beginning of __kfence_alloc()
kfence: defer kfence_test_init to ensure that kunit debugfs is created
selftest: use mmap instead of posix_memalign to allocate memory
userfaultfd: do not untag user pointers
Had a bug when converting bytes to bits when the cpu was rv32.
The a3 contains the number of bytes and multiple of 8
would be the bits. The LGREG is holding 2 for RV32 and 3 for
RV32, so to achieve multiple of 8 it must always be constant 3.
The 2 was mistakenly used for rv32.
projects / users / willy / xarray.git / log