Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 5a6d7c9daef3 ("octeontx2-pf: Mailbox communication with AF") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Wrapping numbers in strings is used by some to work around bit-width issues in
some enviroments. The problem isn't innate to json and the workaround seems to
cause more integration problems than help. Let's drop the string wrapping.
clk_prepare_enable() might fail, we have to check its returned value.
Besides that we have to call clk_disable_unprepare() on the error and
remove paths. Do above in the dwmac-intel driver.
While at it, remove leftover in stmmac_pci and remove unneeded condition
for NULL-aware clk_unregister_fixed_rate() call.
Fixes: 58da0cfa6cf1 ("net: stmmac: create dwmac-intel.c to contain all Intel platform") Cc: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the CPU-offline process, it calls mmdrop() after idle entry and the
subsequent call to cpuhp_report_idle_dead(). Once execution passes the
call to rcu_report_dead(), RCU is ignoring the CPU, which results in
lockdep complaining when mmdrop() uses RCU from either memcg or
debugobjects below.
Fix it by cleaning up the active_mm state from BP instead. Every arch
which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit()
from AP. The only exception is parisc because it switches them to
&init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()),
but the patch will still work there because it calls mmgrab(&init_mm) in
smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu().
WARNING: suspicious RCU usage
-----------------------------
kernel/workqueue.c:710 RCU or wq_pool_mutex should be held!
With CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_CGROUPS=y, kernel oopses in
non-preemptible context look untidy; after the main oops, the kernel prints
a "sleeping function called from invalid context" report because
exit_signals() -> cgroup_threadgroup_change_begin() -> percpu_down_read()
can sleep, and that happens before the preempt_count_set(PREEMPT_ENABLED)
fixup.
It looks like the same thing applies to profile_task_exit() and
kcov_task_exit().
Fix it by moving the preemption fixup up and the calls to
profile_task_exit() and kcov_task_exit() down.
When building 64r6_defconfig with CONFIG_MIPS32_O32 disabled and
CONFIG_CRYPTO_RSA enabled:
lib/mpi/generic_mpih-mul1.c:37:24: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast
or build with -fheinous-gnu-extensions
umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:664:22: note: expanded from macro 'umul_ppmm'
: "=d" ((UDItype)(w0))
~~~~~~~~~~^~~
lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast
or build with -fheinous-gnu-extensions
umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:668:22: note: expanded from macro 'umul_ppmm'
: "=d" ((UDItype)(w1))
~~~~~~~~~~^~~
2 errors generated.
This special case for umul_ppmm for MIPS64r6 was added in
commit bbc25bee37d2b ("lib/mpi: Fix umul_ppmm() for MIPS64r6"), due to
GCC being inefficient and emitting a __multi3 intrinsic.
There is no such issue with clang; with this patch applied, I can build
this configuration without any problems and there are no link errors
like mentioned in the commit above (which I can still reproduce with
GCC 9.3.0 when that commit is reverted). Only use this definition when
GCC is being used.
This really should have been caught by commit b0c091ae04f67 ("lib/mpi:
Eliminate unused umul_ppmm definitions for MIPS") when I was messing
around in this area but I was not testing 64-bit MIPS at the time.
Broadcom STB chips support a deep sleep mode where all register contents
are lost. Because we were stashing the MagicPacket password into some of
these registers a suspend into that deep sleep then a resumption would
not lead to being able to wake-up from MagicPacket with password again.
Fix this by keeping a software copy of the password and program it
during suspend.
Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code") Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit explicitly calls the bcmgenet_set_rx_mode() function when
the network interface is started. This function is normally called by
ndo_set_rx_mode when the flags are changed, but apparently not when
the driver is suspended and resumed.
This change ensures that address filtering or promiscuous mode are
properly restored by the driver after the MAC may have been reset.
Fixes: b6e978e50444 ("net: bcmgenet: add suspend/resume callbacks") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some older versions of gcc badly optimize code that passes
an inline function argument into another function by reference,
causing huge stack usage:
drivers/gpu/drm/bridge/tc358768.c: In function 'tc358768_bridge_pre_enable':
drivers/gpu/drm/bridge/tc358768.c:840:1: error: the frame size of 2256 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
Use a temporary variable as a workaround and add a comment pointing
to the gcc bug.
Copying source files during the build time may not end up with
as clean code as expected.
lib/fdt*.c simply wrap scripts/dtc/libfdt/fdt*.c, and it works
nicely. Let's follow this approach for the arm decompressor, too.
Add four wrappers, arch/arm/boot/compressed/fdt*.c and remove
the Makefile messes. Another nice thing is we no longer need to
maintain the own libfdt_env.h because the decompressor can include
<linux/libfdt_env.h>.
There is a subtle problem when generated files are turned into
check-in files.
When you are doing a rebuild of an existing object tree with O=
option, there exists stale "shipped" copies that the old Makefile
implementation created. The build system ends up with compiling the
stale generated files because Make searches for prerequisites in the
current directory, i.e. $(objtree) first, and then the directory
listed in VPATH, i.e. $(srctree).
Ensure that test runner flavors include their own skeletons from <flavor>/
directory. Previously, skeletons generated for no-flavor test_progs were used.
Apart from fixing correctness, this also makes it possible to compile only
flavors individually:
$ make clean && make test_progs-no_alu32
... now succeeds ...
Factor out map creation and destruction logic to simplify code and especially
error handling. Also fix map FD leak in case of partially successful map
creation during bpf_object load operation.
This change adds the relevant driver and quirk to allow drivers to
report the le_states as being trustworthy.
This has historically been disabled as controllers did not reliably
support this. In particular, this will be used to relax this condition
for controllers that have been well tested and reliable.
/* Most controller will fail if we try to create new connections
* while we have an existing one in slave role.
*/
if (hdev->conn_hash.le_num_slave > 0)
return NULL;
This patch fixes an off by one error in the RV32 JIT handling for BPF
tail call. Currently, the code decrements TCC before checking if it
is less than zero. This limits the maximum number of tail calls to 32
instead of 33 as in other JITs. The fix is to instead check the old
value of TCC before decrementing.
Fixes: 5f316b65e99f ("riscv, bpf: Add RV32G eBPF JIT") Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Xi Wang <xi.wang@gmail.com> Link: https://lore.kernel.org/bpf/20200421002804.5118-1-luke.r.nels@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/net/ethernet/mellanox/mlx4/crdump.c:200:2-8: ERROR: missing iounmap;
ioremap on line 190 and execution via conditional on line 198
Fixes: 7ef19d3b1d5e ("devlink: report error once U32_MAX snapshot ids have been used") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Drivers ndo_setup_tc call should return -EOPNOTSUPP, when it cannot
support the qdisc type. Other return values will result in failing the
qdisc setup. This lead to qdisc noop getting assigned, which will
drop all TX packets on the interface.
Fixes: ab1e6de2bd49 ("dpaa2-eth: Add mqprio support") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The EFI stub uses a per-architecture #define for the minimum base
and size alignment of page allocations, which is set to 4 KB for
all architecures except arm64, which uses 64 KB, to ensure that
allocations can always be (un)mapped efficiently, regardless of
the page size used by the kernel proper, which could be a kexec'ee
The API wrappers around page based allocations assume that this
alignment is always taken into account, and so efi_free() will
also round up its size argument to EFI_ALLOC_ALIGN.
Currently, efi_random_alloc() does not honour this alignment for
the allocated size, and so freeing such an allocation may result
in unrelated memory to be freed, potentially leading to issues
after boot. So let's round up size in efi_random_alloc() as well.
A Linux guest have to pick a "connect CPU" to communicate with the
Hyper-V host. This CPU can not be taken offline because Hyper-V does
not provide a way to change that CPU assignment.
Current code sets the connect CPU to whatever CPU ends up running the
function vmbus_negotiate_version(), and this will generate problems if
that CPU is taken offine.
Establish CPU0 as the connect CPU, and add logics to prevents the
connect CPU from being taken offline. We could pick some other CPU,
and we could pick that "other CPU" dynamically if there was a reason to
do so at some point in the future. But for now, #defining the connect
CPU to 0 is the most straightforward and least complex solution.
While on this, add inline comments explaining "why" offer and rescind
messages should not be handled by a same serialized work queue.
Suggested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20200406001514.19876-2-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
Driver already get display clock from SMU base on MHz, but driver read
again and mutiple 1000 cause wait loop value is overflow.
[How]
remove coding error
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]:
Renoir's pipe VM flags are not correctly updated if pipe strategy has
changed during some scenarios. It will result in watermarks mistakenly
calculation, thus underflow and garbage appear.
[How]:
Correctly update pipe VM flags to pipes which have been populated.
Signed-off-by: Dale Zhao <dale.zhao@amd.com> Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If audit_list_rules_send() fails when trying to create a new thread
to send the rules it also fails to cleanup properly, leaking a
reference to a net structure. This patch fixes the error patch and
renames audit_send_list() to audit_send_list_thread() to better
match its cousin, audit_send_reply_thread().
Reported-by: teroincn@gmail.com Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries
for the BCM4324B5 and BCM20703A1 chipsets. This makes the code use just
"BCM" as prefix for the filename to pass to request-firmware, making it
harder for users to figure out which firmware they need. This especially
is problematic with the UART attached BCM4324B5 where this leads to the
filename being just "BCM.hcd".
Add the 2 missing devices to subver tables. This has been tested on:
1. A Dell XPS15 9550 where this makes btbcm.c try to load
"BCM20703A1-0a5c-6410.hcd" before it tries to load "BCM-0a5c-6410.hcd".
2. A Thinkpad 8 where this makes btbcm.c try to load
"BCM4324B5.hcd" before it tries to load "BCM.hcd"
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When station connected to AP, and run TX traffic such as TCP/UDP, and
system enter suspend state, then mac80211 call ath10k_flush with set
drop flag, recently it only send wmi peer flush to firmware and
firmware will flush all pending TX packets, for PCIe, firmware will
indicate the TX packets status to ath10k, and then ath10k indicate to
mac80211 TX complete with the status, then all the packets has been
flushed at this moment. For SDIO chip, it is different, its TX
complete indication is disabled by default, and it has a tx queue in
ath10k, and its tx credit control is enabled, total tx credit is 96,
when its credit is not sufficient, then the packets will buffered in
the tx queue of ath10k, max packets is TARGET_TLV_NUM_MSDU_DESC_HL
which is 1024, for SDIO, when mac80211 call ath10k_flush with set drop
flag, maybe it have pending packets in tx queue of ath10k, and if it
does not have sufficient tx credit, the packets will stay in queue
untill tx credit report from firmware, if it is a noisy environment,
tx speed is low and the tx credit report from firmware will delay more
time, then the num_pending_tx will remain > 0 untill all packets send
to firmware. After the 1st ath10k_flush, mac80211 will call the 2nd
ath10k_flush without set drop flag immediately, then it will call to
ath10k_mac_wait_tx_complete, and it wait untill num_pending_tx become
to 0, in noisy environment, it is esay to wait about near 5 seconds,
then it cause the suspend take long time.
In the current code, if CONFIG_SWIOTLB is set, when failed to get IO TLB
memory from the low pages by plat_swiotlb_setup(), it may lead to the boot
process failed with kernel panic.
(1) On the Loongson and SiByte platform
arch/mips/loongson64/dma.c
arch/mips/sibyte/common/dma.c
void __init plat_swiotlb_setup(void)
{
swiotlb_init(1);
}
phys_addr_t swiotlb_tbl_map_single()
{
...
if (no_iotlb_memory)
panic("Can not allocate SWIOTLB buffer earlier ...");
...
}
(2) On the Cavium OCTEON platform
arch/mips/cavium-octeon/dma-octeon.c
void __init plat_swiotlb_setup(void)
{
...
octeon_swiotlb = memblock_alloc_low(swiotlbsize, PAGE_SIZE);
if (!octeon_swiotlb)
panic("%s: Failed to allocate %zu bytes align=%lx\n",
__func__, swiotlbsize, PAGE_SIZE);
...
}
Because IO_TLB_DEFAULT_SIZE is 64M, if the rest size of low memory is less
than 64M when call plat_swiotlb_setup(), we can easily reproduce the panic
case.
In order to reduce the possibility of kernel panic when failed to get IO
TLB memory under CONFIG_SWIOTLB, it is better to allocate low memory as
small as possible before plat_swiotlb_setup(), so make sparse_init() using
top-down allocation.
Enabling CONFIG_DMA_API_DEBUG=y and CONFIG_DMA_API_DEBUG_SG=y will
enable extra validation on DMA operations ensuring that the size
restraints are met.
When using the FCP in conjunction with the VSP1/DU, and display frames,
the size of the DMA operations is larger than the default maximum
segment size reported by the DMA core (64K). With the DMA debug enabled,
this produces a warning such as the following:
"DMA-API: rcar-fcp fea27000.fcp: mapping sg segment longer than device
claims to support [len=3145728] [max=65536]"
We have no specific limitation on the segment size which isn't already
handled by the VSP1/DU which actually handles the DMA allcoations and
buffer management, so define a maximum segment size of up to 4GB (a 32
bit mask).
[laurent.pinchart@ideasonboard.com: Decrement index to replace loop counter k]
[laurent.pinchart@ideasonboard.com: Return directly from within the loops]
Fixes: e130291212df5 ("[media] media: Add i.MX media core driver") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Merge yuv_formats and rgb_formats into a single array. Always loop over
all entries, skipping those that do not match the requested search
criteria. This simplifies the code, lets us get rid of the manual
counting of array entries, and stops accidentally ignoring some non-mbus
RGB formats.
Before:
$ v4l2-ctl -d /dev/video14 --list-formats-out
ioctl: VIDIOC_ENUM_FMT
Type: Video Output
[laurent.pinchart@ideasonboard.com: Make loop counters unsigned]
[laurent.pinchart@ideasonboard.com: Decrement index instead of adding a counter]
[laurent.pinchart@ideasonboard.com: Return directly from within loop instead of breaking]
[slongerbeam@gmail.com: Fix colorspace comparison error]
Fixes: e130291212df5 ("[media] media: Add i.MX media core driver") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently when i2c transfers fail the error return -EREMOTEIO
is assigned to err but then later overwritten when the tuner
attach call is made. Fix this by returning early with the
error return code -EREMOTEIO on i2c transfer failure errors.
If the transfer fails, an uninitialized value will be read from b2.
Addresses-Coverity: ("Unused value")
Fixes: fbfee8684ff2 ("V4L/DVB (5651): Dibusb-mb: convert pll handling to properly use dvb-pll") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If audit_send_reply() fails when trying to create a new thread to
send the reply it also fails to cleanup properly, leaking a reference
to a net structure. This patch fixes the error path and makes a
handful of other cleanups that came up while fixing the code.
Reported-by: teroincn@gmail.com Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add property "pinctrl-names" to swap pin mode between gpio and dpi mode.
Set the dpi pins to gpio mode and output-low to avoid leakage current
when dpi disabled.
Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ast driver inherits from DRM's CRTC state, but still uses the atomic
helper for struct drm_crtc_funcs.reset, drm_atomic_helper_crtc_reset().
The helper only allocates enough memory for the core CRTC state. That
results in an out-ouf-bounds access when duplicating the initial CRTC
state. Simplified backtrace shown below:
By default, the VCAP IS2 will produce a single match for each frame, on
the most specific classification.
Example: a ping packet (ICMP over IPv4 over Ethernet) sent from an IP
address of 10.0.0.1 and a MAC address of 96:18:82:00:04:01 will match
this rule:
tc filter add dev swp0 ingress protocol ipv4 \
flower skip_sw src_ip 10.0.0.1 action drop
but not this one:
tc filter add dev swp0 ingress \
flower skip_sw src_mac 96:18:82:00:04:01 action drop
Currently the driver does not really warn the user in any way about
this, and the behavior is rather strange anyway.
The current patch is a workaround to force matches on MAC_ETYPE keys
(DMAC and SMAC) for all packets irrespective of higher layer protocol.
The setting is made at the port level.
Of course this breaks all other non-src_mac and non-dst_mac matches, so
rule exclusivity checks have been added to the driver, in order to never
have rules of both types on any ingress port.
The bits that discard higher-level protocol information are set only
once a MAC_ETYPE rule is added to a filter block, and only for the ports
that are bound to that filter block. Then all further non-MAC_ETYPE
rules added to that filter block should be denied by the ports bound to
it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
drivers/net/ethernet/intel/e1000/e1000_main.c: In function ‘e1000_xmit_frame’:
drivers/net/ethernet/intel/e1000/e1000_main.c:3143:18: warning: statement will never be executed [-Wswitch-unreachable]
3143 | unsigned int pull_size;
| ^~~~~~~~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The xxx_mountpoint() interface provided by fs.c finds mount points for
common pseudo filesystems. The first time xxx_mountpoint() is invoked,
it scans the mount table (/proc/mounts) looking for a match. If found,
it is cached. The price to scan /proc/mounts is paid once if the mount
is found.
When the mount point is not found, subsequent calls to xxx_mountpoint()
scan /proc/mounts over and over again. There is no caching.
This causes a scaling issue in perf record with hugeltbfs__mountpoint().
The function is called for each process found in
synthesize__mmap_events(). If the machine has thousands of processes
and if the /proc/mounts has many entries this could cause major overhead
in perf record. We have observed multi-second slowdowns on some
configurations.
As an example on a laptop:
Before:
$ sudo umount /dev/hugepages
$ strace -e trace=openat -o /tmp/tt perf record -a ls
$ fgrep mounts /tmp/tt
285
After:
$ sudo umount /dev/hugepages
$ strace -e trace=openat -o /tmp/tt perf record -a ls
$ fgrep mounts /tmp/tt
1
One could argue that the non-caching in case the moint point is not
found is intentional. That way subsequent calls may discover a moint
point if the sysadmin mounts the filesystem. But the same argument could
be made against caching the mount point. It could be unmounted causing
errors. It all depends on the intent of the interface. This patch
assumes it is expected to scan /proc/mounts once. The patch documents
the caching behavior in the fs.h header file.
An alternative would be to just fix perf record. But it would solve the
problem with hugetlbs__mountpoint() but there could be similar issues
(possibly down the line) with other xxx_mountpoint() calls in perf or
other tools.
Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrey Zhizhikin <andrey.z@gmail.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20200402154357.107873-3-irogers@google.com Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
sup_wpa feature is getting after setting feature_disable flag.
If firmware is supported sup_wpa feature, it's always enabled
regardless of feature_disable flag.
Fixes: b8a64f0e96c2 ("brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSK") Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200330052528.10503-1-jh80.chung@samsung.com Signed-off-by: Sasha Levin <sashal@kernel.org>
By unknown reason the commit 64bee4d28c9e
("spi / ACPI: add ACPI enumeration support")
missed the DataBitLength property to encounter when parse SPI slave
device data from ACPI.
The Venus driver is voting Configuration NoC during .probe but not clear
voting in .suspend. Because of this NoC is up during shutdown also. As a
consequence the whole device could leak energy while in .suspend.
So correct this by moving voting in .resume and unvoting
in .suspend
Implemented a lock to synchronize imgu stream on / off operations and
the modification of streaming flag (in struct imgu_device), to prevent
these issues.
Currently sta airtime is updated without any lock in case of
host based airtime calculation. Which may result in accessing the
invalid sta pointer in case of continuous station connect/disconnect.
This patch fix the kernel null pointer dereference by updating the
station airtime with proper RCU lock in case of host based airtime
calculation.
Proceeding with the analysis of "ARM Kernel Panic".
The APSS crash happened due to OOPS on CPU 0.
Crash Signature : Unable to handle kernel NULL pointer dereference
at virtual address 00000300
During the crash,
PC points to "ieee80211_sta_register_airtime+0x1c/0x448 [mac80211]"
LR points to "ath10k_txrx_tx_unref+0x17c/0x364 [ath10k_core]".
The Backtrace obtained is as follows:
[<bf880238>] (ieee80211_sta_register_airtime [mac80211]) from
[<bf945a38>] (ath10k_txrx_tx_unref+0x17c/0x364 [ath10k_core])
[<bf945a38>] (ath10k_txrx_tx_unref [ath10k_core]) from
[<bf9428e4>] (ath10k_htt_txrx_compl_task+0xa50/0xfc0 [ath10k_core])
[<bf9428e4>] (ath10k_htt_txrx_compl_task [ath10k_core]) from
[<bf9b9bc8>] (ath10k_pci_napi_poll+0x50/0xf8 [ath10k_pci])
[<bf9b9bc8>] (ath10k_pci_napi_poll [ath10k_pci]) from
[<c059e3b0>] (net_rx_action+0xac/0x160)
[<c059e3b0>] (net_rx_action) from [<c02329a4>] (__do_softirq+0x104/0x294)
[<c02329a4>] (__do_softirq) from [<c0232b64>] (run_ksoftirqd+0x30/0x90)
[<c0232b64>] (run_ksoftirqd) from [<c024e358>] (smpboot_thread_fn+0x25c/0x274)
[<c024e358>] (smpboot_thread_fn) from [<c02482fc>] (kthread+0xd8/0xec)
The mgmt tx count reference is incremented/decremented on every mgmt tx and on
tx completion event from firmware.
In case of an unexpected mgmt tx completion event from firmware,
the counter would underflow. Avoid this by decrementing
only when the tx count is greater than 0.
because the hardware limitation,The initial color depth must set to 32bpp
and must set the FB Offset of the display hardware to 128Byte alignment,
which is used to solve the display problem at 800x600 and 1440x900
resolution under 16bpp.
Currently the error message refers to the command WMI_TWT_DIeABLE_CMDID
which looks like a cut-n-paste mangled typo. Fix the message to match
the command WMI_BSS_COLOR_CHANGE_ENABLE_CMDID that failed.
Fixes: 5a032c8d1953 ("ath11k: add WMI calls required for handling BSS color") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200327192639.363354-1-colin.king@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 8d58f222e85f ("ubsan: disable UBSAN_ALIGNMENT under
COMPILE_TEST") tried to fix the pathological results of UBSAN_ALIGNMENT
with UBSAN_TRAP (which objtool would rightly scream about), but it made
an assumption about how COMPILE_TEST gets set (it is not set for
randconfig). As a result, we need a bigger hammer here: just don't
allow the alignment checks with the trap mode.
Fixes: 8d58f222e85f ("ubsan: disable UBSAN_ALIGNMENT under COMPILE_TEST") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Elena Petrova <lenaptr@google.com> Link: http://lkml.kernel.org/r/202005291236.000FCB6@keescook Link: https://lore.kernel.org/lkml/742521db-1e8c-0d7a-1ed4-a908894fb497@infradead.org/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This fixes an error observed after running coccinile check.
drivers/crypto/chelsio/chcr_algo.c:1462:5-8: Unneeded variable:
"err". Return "0" on line 1480
This line is missed in the commit 567be3a5d227 ("crypto:
chelsio - Use multiple txq/rxq per tfm to process the requests").
Fixes: 567be3a5d227 ("crypto:
chelsio - Use multiple txq/rxq per tfm to process the requests").
V1->V2
-Modified subject.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The value adapter->rss_conf is stored in DMA memory, and it is assigned
to rssConf, so rssConf->indTableSize can be modified at anytime by
malicious hardware. Because rssConf->indTableSize is assigned to n,
buffer overflow may occur when the code "rssConf->indTable[n]" is
executed.
To fix this possible bug, n is checked after being used.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The problem the patch is trying to address is the fact that 'struct
kvm_hyperv_exit' has different layout on when compiling in 32 and 64 bit
modes.
In 64-bit mode the default alignment boundary is 64 bits thus
forcing extra gaps after 'type' and 'msr' but in 32-bit mode the
boundary is at 32 bits thus no extra gaps.
This is an issue as even when the kernel is 64 bit, the userspace using
the interface can be both 32 and 64 bit but the same 32 bit userspace has
to work with 32 bit kernel.
The issue is fixed by forcing the 64 bit layout, this leads to ABI
change for 32 bit builds and while we are obviously breaking '32 bit
userspace with 32 bit kernel' case, we're fixing the '32 bit userspace
with 64 bit kernel' one.
As the interface has no (known) users and 32 bit KVM is rather baroque
nowadays, this seems like a reasonable decision.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424113746.3473563-2-arilou@gmail.com> Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit ceb2f00707f9 ("ice: Use pci_get_dsn()") changed the code to
use a new function to get the Device Serial Number. It also changed
the case of the filename for loading a package on a specific NIC
from lowercase to uppercase. Change the filename back to
lowercase since that is what we specified.
Fixes: ceb2f00707f9 ("ice: Use pci_get_dsn()") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Tx-only DMA transfers are working perfectly fine since in this case
the code just ignores the Rx FIFO overflow interrupts. But it turns
out the SPI Rx-only transfers are broken since nothing pushing any
data to the shift registers, so the Rx FIFO is left empty and the
SPI core subsystems just returns a timeout error. Since DW DMAC
driver doesn't support something like cyclic write operations of
a single byte to a device register, the only way to support the
Rx-only SPI transfers is to fake it by using a dummy Tx-buffer.
This is what we intend to fix in this commit by setting the
SPI_CONTROLLER_MUST_TX flag for DMA-capable platform.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-9-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calls of the functions clk_disable_unprepare() and hci_free_dev()
were missing for the exception handling.
Thus add the missed function calls together with corresponding
jump targets.
The vendor driver (from the 3.10 kernel) triggers a soft reset every
time before starting a new command. While this fixes a problem where
SDIO cards are not detected at all (because all commands simply
timed out) this hurts SD card read performance a bit (in my tests
between 10% to 20%).
Trigger a soft reset after we got a CRC error or if the previous command
timed out (just like the vendor driver from the same 3.10 kernel for the
newer SDHC controller IP does). This fixes detection of SDIO cards and
doesn't hurt SD card read performance at the same time.
This patch fix a power-on issue, and avoid to retry the power sequence.
In power off sequence: sdmmc must set pwr_reg in "power-cycle" state
(value 0x2), to prevent the card from being supplied through the signal
lines (all the lines are driven low).
In power on sequence: when the power is stable, sdmmc must set pwr_reg
in "power-off" state (value 0x0) to drive all signal to high before to
set "power-on".
To avoid writing the same value to the power register several times, this
register is cached by the pwr_reg variable. At probe pwr_reg is initialized
to 0 by kzalloc of mmc_alloc_host.
Like pwr_reg value is 0 at probing, the power on sequence fail because
the "power-off" state is not writes (value 0x0) and the lines
remain drive to low.
This patch initializes "pwr_reg" variable with power register value.
This it done in sdmmc variant init to not disturb default mmci behavior.
This is a known false positive because inodes cannot simultaneously be
getting reclaimed and the target of a getxattr operation, but lockdep
doesn't know that. We can (selectively) shut up lockdep until either
it gets smarter or we change inode reclaim not to require the ILOCK by
applying a stupid GFP_NOLOCKDEP bandaid.
Reported-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Tested-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit 8c46fcd78308 ("batman-adv: disable ethtool link speed detection
when auto negotiation off") disabled the usage of ethtool's link_ksetting
when auto negotation was enabled due to invalid values when used with
tun/tap virtual net_devices. According to the patch, automatic measurements
should be used for these kind of interfaces.
But there are major flaws with this argumentation:
* automatic measurements are not implemented
* auto negotiation has nothing to do with the validity of the retrieved
values
The first point has to be fixed by a longer patch series. The "validity"
part of the second point must be addressed in the same patch series by
dropping the usage of ethtool's link_ksetting (thus always doing automatic
measurements over ethernet).
Drop the patch again to have more default values for various net_device
types/configurations. The user can still overwrite them using the
batadv_hardif's BATADV_ATTR_THROUGHPUT_OVERRIDE.
Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Recent work with KASan exposed the folling hard-coded bitmask
in arch/arm/mm/proc-macros.S:
bic rd, sp, #8128
bic rd, rd, #63
This forms the bitmask 0x1FFF that is coinciding with
(PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming
that THREAD_SIZE is always 8K (8192).
As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into
this bug.
Fix it by this little oneline suggested by Ard:
bic rd, sp, #(THREAD_SIZE - 1) & ~63
Where THREAD_SIZE is defined using THREAD_SIZE_ORDER.
We have to also include <linux/const.h> since the THREAD_SIZE
expands to use the _AC() macro.
It is not valid to cache/short out selection of the mux.
mux_control_select() only locks the mux until mux_control_deselect()
is called. mux_control_deselect() may put the mux in some low power
state or some other user of the mux might select it for other purposes.
These things are probably not happening in the original setting where
this driver was developed, but it is said to be a generic SPI mux.
Also, the mux framework will short out the actual low level muxing
operation when/if that is possible.
Fixes: e9e40543ad5b ("spi: Add generic SPI multiplexer") Signed-off-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/20200525104352.26807-1-peda@axentia.se Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We are currently treating any non-zero return value from btrfs_next_leaf()
the same way, by going to the code that inserts a new checksum item in the
tree. However if btrfs_next_leaf() returns an error (a value < 0), we
should just stop and return the error, and not behave as if nothing has
happened, since in that case we do not have a way to know if there is a
next leaf or we are currently at the last leaf already.
So fix that by returning the error from btrfs_next_leaf().
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On ppc64le with 64k page size (respectively 64k block size) generic/320
was failing and debug output showed we were getting a premature ENOSPC
with a bunch of space in btrfs_fs_info::trans_block_rsv.
This meant there were still open transaction handles holding space, yet
the flusher didn't commit the transaction because it deemed the freed
space won't be enough to satisfy the current reserve ticket. Fix this
by accounting for space in trans_block_rsv when deciding whether the
current transaction should be committed or not.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 100214889973 ("clocksource: dw_apb_timer_of: use
clocksource_of_init") replaced a publicly available driver
initialization method with one called by the timer_probe() method
available after CLKSRC_OF. In current implementation it traverses
all the timers available in the system and calls their initialization
methods if corresponding devices were either in dtb or in acpi. But
if before the commit any number of available timers would be installed
as clockevent and clocksource devices, after that there would be at most
two. The rest are just ignored since default case branch doesn't do
anything. I don't see a reason of such behaviour, neither the commit
message explains it. Moreover this might be wrong if on some platforms
these timers might be used for different purpose, as virtually CPU-local
clockevent timers and as an independent broadcast timer. So in order
to keep the compatibility with the platforms where the order of the
timers detection has some meaning, lets add the secondly discovered
timer to be of clocksource/sched_clock type, while the very first and
the others would provide the clockevents service.
Currently the DW APB Timer driver binds each clockevent timers to a
particular CPU. This isn't good for multiple reasons. First of all seeing
the device is placed on APB bus (which makes it accessible from any CPU
core), accessible over MMIO and having the DYNIRQ flag set we can be sure
that manually binding the timer to any CPU just isn't correct. By doing
so we just set an extra limitation on device usage. This also doesn't
reflect the device actual capability, since by setting the IRQ affinity
we can make it virtually local to any CPU. Secondly imagine if you had a
real CPU-local timer with the same rating and the same CPU-affinity.
In this case if DW APB timer was registered first, then due to the
clockevent framework tick-timer selection procedure we'll end up with the
real CPU-local timer being left unselected for clock-events tracking. But
on most of the platforms (MIPS/ARM/etc) such timers are normally embedded
into the CPU core and are accessible with much better performance then
devices placed on APB. For instance in MIPS architectures there is
r4k-timer, which is CPU-local, assigned with the same rating, and normally
its clockevent device is registered after the platform-specific one.
So in order to fix all of these issues let's make the DW APB Timer CPU
affinity being optional and deactivated by passing a negative CPU id,
which will effectively set the DW APB clockevent timer cpumask to
'cpu_possible_mask'.
The commit 4f41fe386a94 ("clocksource/drivers/timer-probe: Avoid
creating dead devices") broke the handling of arm,vexpress-sysreg [1].
The arm,vexpress-sysreg device is handled by both timer-versatile.c and
drivers/mfd/vexpress-sysreg.c. While the timer driver doesn't use the
device, the mfd driver still needs a device to probe.
So, this patch clears the OF_POPULATED flag to continue creating the
device.
It's pointless to track the Tx overrun interrupts if Rx-only SPI
transfer is issued. Similarly there is no need in handling the Rx
overrun/underrun interrupts if Tx-only SPI transfer is executed.
So lets unmask the interrupts only if corresponding SPI
transactions are implied.
Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 1aeba347b3a9 ("MIPS: Hardcode cpu_has_mips* where target ISA
allows") updated the cpu_has_mips* macro to be replaced with a constant
expression where it's possible. By mistake it wasn't done correctly
for cpu_has_mips64r1/cpu_has_mips64r2 macro. They are defined to
be replaced with conditional expression __isa_range_or_flag(), which
means either ISA revision being within the range or the corresponding
CPU options flag was set at the probe stage or both being true at the
same time. But the ISA level value doesn't indicate whether the ISA is
MIPS32 or MIPS64. Due to this if we select MIPS32r1 - MIPS32r5
architectures the __isa_range() macro will activate the
cpu_has_mips64rX flags, which is incorrect. In order to fix the
problem we make sure the 64bits CPU support is enabled by means of
checking the flag cpu_has_64bits aside with proper ISA range and specific
Revision flag being set.
Fixes: 1aeba347b3a9 ("MIPS: Hardcode cpu_has_mips* where target ISA allows") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add another panel that needs the edid quirk to the list so that
brightness control works correctly. Fixes issue seen on Lenovo X13 Yoga
with OLED panel
An IORT PMCG node can have no ID mapping if its overflow interrupt is
wire based therefore the code that parses the PMCG node can not assume
the node will always have a single mapping present at index 0.
Fix iort_get_id_mapping_index() by checking for an overflow interrupt
and mapping count.
Fixes: 24e516049360 ("ACPI/IORT: Add support for PMCG") Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com> Reviewed-by: Hanjun Guo <guoahanjun@huawei.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/1589994787-28637-1-git-send-email-tuanphan@os.amperecomputing.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If 'thermal_cooling_device_register()' fails, we must undo what has been
allocated so far. So we must go to 'err_thermal_destroy' instead of
returning directly
In case of error in 'ath11k_thermal_register()', the previous
'thermal_cooling_device_register()' call must also be undone. Move the
'ar->thermal.cdev = cdev' a few lines above in order for this to be done
in 'ath11k_thermal_unregister()' which is called in the error handling
path.
Currently when trying to remove the SMMUv3 PMU module we get a
WARN_ON_ONCE from free_irq(), because the affinity hint set during probe
hasn't been properly cleared.
If we detect that we recursively entered the debugger we should hack
our I/O ops to NULL so that the panic() in the next line won't
actually cause another recursion into the debugger. The first line of
kgdb_panic() will check this and return.
In commit 81eaadcae81b ("kgdboc: disable the console lock when in
kgdb") we avoided the WARN_CONSOLE_UNLOCKED() yell when we were in
kgdboc. That still works fine, but it turns out that we get a similar
yell when using other I/O drivers. One example is the "I/O driver"
for the kgdb test suite (kgdbts). When I enabled that I again got the
same yells.
Even though "kgdbts" doesn't actually interact with the user over the
console, using it still causes kgdb to print to the consoles. That
trips the same warning:
con_is_visible+0x60/0x68
con_scroll+0x110/0x1b8
lf+0x4c/0xc8
vt_console_print+0x1b8/0x348
vkdb_printf+0x320/0x89c
kdb_printf+0x68/0x90
kdb_main_loop+0x190/0x860
kdb_stub+0x2cc/0x3ec
kgdb_cpu_enter+0x268/0x744
kgdb_handle_exception+0x1a4/0x200
kgdb_compiled_brk_fn+0x34/0x44
brk_handler+0x7c/0xb8
do_debug_exception+0x1b4/0x228
Let's increment/decrement the "ignore_console_lock_warning" variable
all the time when we enter the debugger.
This will allow us to later revert commit 81eaadcae81b ("kgdboc:
disable the console lock when in kgdb").
Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://lore.kernel.org/r/20200507130644.v4.1.Ied2b058357152ebcc8bf68edd6f20a11d98d7d4e@changeid Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth PTS test case HFP/AG/ACC/BI-12-I accepts SCO connection
with invalid parameter at the first SCO request expecting AG to
attempt another SCO request with the use of "safe settings" for
given codec, base on section 5.7.1.2 of HFP 1.7 specification.
This patch addresses it by adding "Invalid LMP Parameters" (0x1e)
to the SCO fallback case. Verified with below log:
< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
Handle: 256
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x0380
3-EV3 may not be used
2-EV5 may not be used
3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
Setup Synchronous Connection (0x01|0x0028) ncmd 1
Status: Success (0x00)
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 256
Count: 1
> HCI Event: Max Slots Change (0x1b) plen 3
Handle: 256
Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
Status: Invalid LMP Parameters / Invalid LL Parameters (0x1e)
Handle: 0
Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
Link type: eSCO (0x02)
Transmission interval: 0x00
Retransmission window: 0x02
RX packet length: 0
TX packet length: 0
Air mode: Transparent (0x03)
< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
Handle: 256
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 8
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x03c8
EV3 may be used
2-EV3 may not be used
3-EV3 may not be used
2-EV5 may not be used
3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
Setup Synchronous Connection (0x01|0x0028) ncmd 1
Status: Success (0x00)
> HCI Event: Max Slots Change (0x1b) plen 3
Handle: 256
Max slots: 5
> HCI Event: Max Slots Change (0x1b) plen 3
Handle: 256
Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
Status: Success (0x00)
Handle: 257
Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
Link type: eSCO (0x02)
Transmission interval: 0x06
Retransmission window: 0x04
RX packet length: 30
TX packet length: 30
Air mode: Transparent (0x03)
When enumerating the frame sizes, the value sent to
imx219_get_format_code should be fse->code
(the code from the ioctl) and not imx219->fmt.code
which is the code set currently in the driver.
Fixes: 22da1d56e982 ("media: i2c: imx219: Add support for RAW8 bit bayer format") Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When ATI Radeon GPU driver has been compiled directly into the kernel
instead of as a module, we should make sure the firmware for the model
(check available ones in /lib/firmware/radeon) is built-in to the kernel
as well, otherwise there exists the following fatal error during GPU init,
change CONFIG_DRM_RADEON=y to CONFIG_DRM_RADEON=m to fix it.
[ 1.900997] [drm] Loading RS780 Microcode
[ 1.905077] radeon 0000:01:05.0: Direct firmware load for radeon/RS780_pfp.bin failed with error -2
[ 1.914140] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[ 1.920405] [drm:r600_init] *ERROR* Failed to load firmware!
[ 1.926069] radeon 0000:01:05.0: Fatal error during GPU init
[ 1.931729] [drm] radeon: finishing device.
Fixes: 024e6a8b5bb1 ("MIPS: Loongson: Add a Loongson-3 default config file") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Moving forward, platforms are going to need to execute specific "last-man"
operations before a domain idle state can be entered. In one way or the
other, these operations needs to be triggered while walking the
hierarchical topology via runtime PM and genpd, as it's at that point the
last-man becomes known.
Moreover, executing last-man operations needs to be done after the CPU PM
notifications are sent through cpu_pm_enter(), as otherwise it's likely
that some notifications would fail. Therefore, let's re-order the sequence
in psci_enter_domain_idle_state(), so cpu_pm_enter() gets called prior
pm_runtime_put_sync().
Fixes: ce85aef570df ("cpuidle: psci: Manage runtime PM in the idle path") Reported-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On Dell G3-3590, error message is issued during boot up,
"platform::micmute: Setting an LED's brightness failed (-19)",
but there's no micmute led on the machine.
Get the related tokens of SMBIOS, GLOBAL_MIC_MUTE_DISABLE/ENABLE.
If one of two tokens doesn't exist,
don't call led_classdev_register() for platform::micmute.
After that, you wouldn't see the platform::micmute in /sys/class/leds/,
and the error message wouldn't see in dmesg.
Fixes: d00fa46e0a2c6 ("platform/x86: dell-laptop: Add micmute LED trigger support") Signed-off-by: Koba Ko <koba.ko@canonical.com> Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com> Reviewed-by: Pali Rohár <pali@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ixgbe driver have another memory model when compiled on archs with
PAGE_SIZE above 4096 bytes. In this mode it doesn't split the page in
two halves, but instead increment rx_buffer->page_offset by truesize of
packet (which include headroom and tailroom for skb_shared_info).
This is done correctly in ixgbe_build_skb(), but in ixgbe_rx_buffer_flip
which is currently only called on XDP_TX and XDP_REDIRECT, it forgets
to add the tailroom for skb_shared_info. This breaks XDP_REDIRECT, for
veth and cpumap. Fix by adding size of skb_shared_info tailroom.
Maintainers notice: This fix have been queued to Jeff.
Fixes: 6453073987ba ("ixgbe: add initial support for xdp redirect") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Link: https://lore.kernel.org/bpf/158945344946.97035.17031588499266605743.stgit@firesoul Signed-off-by: Sasha Levin <sashal@kernel.org>
A number of userspace tools, such as systemtap, need a way to see the
current lockdown state so they can gracefully deal with the kernel being
locked down. The state is already exposed in
/sys/kernel/security/lockdown, but is only readable by root. Adjust the
permissions so unprivileged users can read the state.
Fixes: 000d388ed3bb ("security: Add a static lockdown policy LSM") Cc: Frank Ch. Eigler <fche@redhat.com> Signed-off-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to drm_plane_create_zpos_property() function documentation,
all planes zpos range should be set if zpos property is supported.
However, the rcar-du driver didn't set primary plane zpos range. Since
the primary plane's zpos is fixed, set it immutably.
Reported-by: Yoshihito Ogawa <yoshihito.ogawa.kc@renesas.com> Reported-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Tomohito Esaki <etom@igel.co.jp> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Stone <daniels@collabora.com>
[Turn continue into if ... else ...] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / users / dwmw2 / linux.git / log