Greg Kroah-Hartman [Wed, 12 Jun 2019 15:22:04 +0000 (17:22 +0200)]
orangefs: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Mike Marshall <hubcap@omnibond.com> Cc: Martin Brandenburg <martin@omnibond.com> Cc: devel@lists.orangefs.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20190612152204.GA17511@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 12 Jun 2019 15:26:03 +0000 (17:26 +0200)]
nfsd: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Wed, 12 Jun 2019 15:34:40 +0000 (17:34 +0200)]
lib: 842: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
As it is not recommended that debugfs calls be checked, it was pointed
out that major errors should still be logged somewhere so that
developers and users have a chance to figure out what went wrong. To
help with this, error logging has been added to the debugfs core so that
it is not needed to be present in every individual file that calls
debugfs.
Reported-by: Mark Brown <broonie@kernel.org> Reported-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20190703071653.2799-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Fri, 14 Jun 2019 17:54:01 +0000 (18:54 +0100)]
drivers: Add generic helper to match by of_node
Add a helper to match device by the of_node. This will be later used
to provide wrappers to the device iterators for {bus/class/driver}_find_device().
Convert other users to reuse this new helper.
Cc: Alan Tull <atull@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: "David S. Miller" <davem@davemloft.net> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: linux-fpga@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-spi@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Mark Brown <broonie@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Moritz Fischer <mdf@kernel.org> Cc: Peter Rosin <peda@axentia.se> Cc: Rob Herring <robh+dt@kernel.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Thor Thayer <thor.thayer@linux.intel.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Fri, 14 Jun 2019 17:54:00 +0000 (18:54 +0100)]
driver_find_device: Unify the match function with class_find_device()
The driver_find_device() accepts a match function pointer to
filter the devices for lookup, similar to bus/class_find_device().
However, there is a minor difference in the prototype for the
match parameter for driver_find_device() with the now unified
version accepted by {bus/class}_find_device(), where it doesn't
accept a "const" qualifier for the data argument. This prevents
us from reusing the generic match functions for driver_find_device().
For this reason, change the prototype of the driver_find_device() to
make the "match" parameter in line with {bus/class}_find_device()
and adjust its callers to use the const qualifier. Also, we could
now promote the "data" parameter to const as we pass it down
as a const parameter to the match functions.
Cc: Corey Minyard <minyard@acm.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com> Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Fri, 14 Jun 2019 17:53:59 +0000 (18:53 +0100)]
bus_find_device: Unify the match callback with class_find_device
There is an arbitrary difference between the prototypes of
bus_find_device() and class_find_device() preventing their callers
from passing the same pair of data and match() arguments to both of
them, which is the const qualifier used in the prototype of
class_find_device(). If that qualifier is also used in the
bus_find_device() prototype, it will be possible to pass the same
match() callback function to both bus_find_device() and
class_find_device(), which will allow some optimizations to be made in
order to avoid code duplication going forward. Also with that, constify
the "data" parameter as it is passed as a const to the match function.
For this reason, change the prototype of bus_find_device() to match
the prototype of class_find_device() and adjust its callers to use the
const qualifier in accordance with the new prototype of it.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Corey Minyard <minyard@acm.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Kershner <david.kershner@unisys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Airlie <airlied@linux.ie> Cc: Felipe Balbi <balbi@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Cameron <jic23@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: Len Brown <lenb@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Jamet <michael.jamet@intel.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Cc: rafael@kernel.org Acked-by: Corey Minyard <minyard@acm.org> Acked-by: David Kershner <david.kershner@unisys.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Fri, 14 Jun 2019 17:53:58 +0000 (18:53 +0100)]
acpi: utils: Cleanup acpi_dev_match_cb
The prototype of bus_find_device() will be unified with that of
class_find_device() subsequently, but for this purpose the callback
functions passed to it need to take (const void *) as the second
argument. Consequently, they cannot modify the memory pointed to by
that argument which currently is not the case for acpi_dev_match_cb().
However, acpi_dev_match_cb() really need not modify the "match" object
passed to it, because acpi_dev_get_first_match_dev() which uses it via
bus_find_device() can easily convert the result of bus_find_device()
into the pointer to return.
For this reason, update acpi_dev_match_cb() to avoid the redundant
memory updates.
Cc: Len Brown <lenb@kernel.org> Cc: linux-acpi@vger.kernel.org Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Fri, 14 Jun 2019 17:53:56 +0000 (18:53 +0100)]
staging: most-core: Use bus_find_device_by_name
Use bus_find_device_by_name() helper instead of writing our
own helper.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Christian Gromm <christian.gromm@microchip.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Fri, 14 Jun 2019 09:43:11 +0000 (10:43 +0100)]
lkdtm: remove redundant initialization of ret
The variable ret is being initialized with the value -EINVAL however
this value is never read and ret is being re-assigned later on. Hence
the initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The author of this file should be given an award for creativity:
the What: fields on this file technically fulfills the description
at README. Yet, the way it is, it can't be parsed on a script,
and if someone would try to do something like:
grep hwmon*/jtag_enable
It wouldn't find anything.
Fix the What fields in a way that it can be parseable by a
script and other search tools.
Several entries at the ABI have multiple What: with the same
description.
Instead of showing those symbols as sections, let's show them
as tables. That makes easier to read on the final output,
and avoid too much recursion at Sphinx parsing.
We need to put file references at the end, as we don't want
non-file tables to be mangled with other entries.
scripts/get_abi.pl: split label naming from xref logic
Instead of using a ReST compilant label while parsing,
move the label to ReST output. That makes the parsing logic
more generic, allowing it to provide other types of output.
As a side effect, now all files used to generate the output
will be output. We can later add command line arguments to
filter.
scripts/get_abi.pl: avoid use literal blocks when not needed
The usage of literal blocks make the document very complex,
causing the browser to take a long time to load.
On most ABI descriptions, they're a plain text, and don't
require a literal block.
So, add a logic there with identifies when a literal block
is needed.
As, on literal blocks, we need to respect the original
document space, the most complex part of this patch is
to preserve the original spacing where needed.
Add a script to parse the Documentation/ABI files and produce
an output with all entries inside an ABI (sub)directory.
Right now, it outputs its contents on ReST format. It shouldn't
be hard to make it produce other kind of outputs, since the ABI
file parser is implemented in separate than the output generator.
docs: driver-model: convert docs to ReST and rename to *.rst
Convert the various documents at the driver-model, preparing
them to be part of the driver-api book.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
There was a typo at the name of the vars inside the kernel-doc
comment, causing those warnings:
./drivers/base/node.c:690: warning: Function parameter or member 'mem_nid' not described in 'register_memory_node_under_compute_node'
./drivers/base/node.c:690: warning: Function parameter or member 'cpu_nid' not described in 'register_memory_node_under_compute_node'
./drivers/base/node.c:690: warning: Excess function parameter 'mem_node' description in 'register_memory_node_under_compute_node'
./drivers/base/node.c:690: warning: Excess function parameter 'cpu_node' description in 'register_memory_node_under_compute_node'
There's also a description missing here:
./drivers/base/node.c:78: warning: Function parameter or member 'hmem_attrs' not described in 'node_access_nodes'
Copy an existing description from another function call.
Greg Kroah-Hartman [Thu, 13 Jun 2019 18:37:29 +0000 (20:37 +0200)]
thermal: bcm2835: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 11 Jun 2019 18:05:47 +0000 (20:05 +0200)]
power: avs: smartreflex: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
And even when not checking the return value, no need to cast away the
call to (void), as these functions were never a "must check" type of a
function, so remove that odd cast.
Greg Kroah-Hartman [Fri, 14 Jun 2019 07:14:23 +0000 (09:14 +0200)]
6lowpan: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Because we don't care if debugfs works or not, this trickles back a bit
so we can clean things up by making some functions return void instead
of an error value that is never going to fail.
Cc: Alexander Aring <alex.aring@gmail.com> Cc: Jukka Rissanen <jukka.rissanen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-bluetooth@vger.kernel.org Cc: linux-wpan@vger.kernel.org Cc: netdev@vger.kernel.org Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 18 Jun 2019 15:58:09 +0000 (17:58 +0200)]
watchdog: bcm_kona_wdt: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 18 Jun 2019 15:58:30 +0000 (17:58 +0200)]
watchdog: mei_wdt: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 18 Jun 2019 15:52:46 +0000 (17:52 +0200)]
coresight: cpu-debug: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Kimberly Brown [Thu, 2 May 2019 17:34:45 +0000 (13:34 -0400)]
btrfs: sysfs: Replace default_attrs in ktypes with groups
The kobj_type default_attrs field is being replaced by the
default_groups field. Replace the default_attrs fields in
btrfs_raid_ktype and space_info_ktype with default_groups.
Change "raid_attributes" to "raid_attrs", and use the ATTRIBUTE_GROUPS
macro to create raid_groups and space_info_groups.
Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com> Acked-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nishad Kamdar [Thu, 13 Jun 2019 14:00:03 +0000 (19:30 +0530)]
firmware: arm_scmi: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style
in header file related to Firmware Drivers for ARM SCMI
Message Protocol.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Nishad Kamdar [Fri, 14 Jun 2019 13:57:45 +0000 (19:27 +0530)]
firmware: ti_sci: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style
in header file related to Firmware Drivers for Texas
Instruments SCI Protocol.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Greg Kroah-Hartman [Tue, 11 Jun 2019 18:38:16 +0000 (20:38 +0200)]
mei: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 11 Jun 2019 18:41:07 +0000 (20:41 +0200)]
genwq: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 11 Jun 2019 18:43:23 +0000 (20:43 +0200)]
mic: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Wed, 12 Jun 2019 09:58:28 +0000 (11:58 +0200)]
fault-inject: clean up debugfs file creation logic
There is no need to check the return value of a debugfs_create_file
call, a caller should never change what they do depending on if debugfs
is working properly or not, so remove the checks, simplifying the logic
in the file a lot.
Also fix up the error check for debugfs_create_dir() which was not
returning NULL for an error, but rather a error pointer.
Cc: linux-kernel@vger.kernel.org Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 12 Jun 2019 15:35:34 +0000 (17:35 +0200)]
lib: dynamic_debug: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: linux-kernel@vger.kernel.org Acked-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 12 Jun 2019 15:54:18 +0000 (17:54 +0200)]
cxl: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Because there's no need to check, also make the return value of the
local debugfs_create_io_x64() call void, as no one ever did anything
with the return value (as they did not need to.)
And make the cxl_debugfs_* calls return void as no one was even checking
their return value at all.
Greg Kroah-Hartman [Thu, 13 Jun 2019 18:37:53 +0000 (20:37 +0200)]
thermal: tegra: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Wei Ni <wni@nvidia.com> Cc: Yangtao Li <tiny.windzz@gmail.com> Cc: linux-pm@vger.kernel.org Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 13 Jun 2019 18:38:10 +0000 (20:38 +0200)]
thermal: intel_powerclamp: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: linux-pm@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 13 Jun 2019 18:38:30 +0000 (20:38 +0200)]
thermal: intel: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
This patch adds the test cases for checking compressed firmware load.
Two more cases are added to fw_filesystem.sh:
- Both a plain file and an xz file are present, and load the former
- Only an xz file is present, and load without '.xz' suffix
The tests are enabled only when CONFIG_FW_LOADER_COMPRESS is enabled
and xz program is installed.
Takashi Iwai [Tue, 11 Jun 2019 12:26:25 +0000 (14:26 +0200)]
firmware: Add support for loading compressed files
This patch adds the support for loading compressed firmware files.
The primary motivation is to reduce the storage size; e.g. currently
the files in /lib/firmware on my machine counts up to 419MB, while
they can be reduced to 130MB by file compression.
The patch introduces a new kconfig option CONFIG_FW_LOADER_COMPRESS.
Even with this option set, the firmware loader still tries to load the
original firmware file as-is at first, but then falls back to the file
with ".xz" extension when it's not found, and the decompressed file
content is returned to the caller of request_firmware(). So, no
change is needed for the rest.
Currently only XZ format is supported. A caveat is that the kernel XZ
helper code supports only CRC32 (or none) integrity check type, so
you'll have to compress the files via xz -C crc32 option.
Since we can't determine the expanded size immediately from an XZ
file, the patch re-uses the paged buffer that was used for the
user-mode fallback; it puts the decompressed content page, which are
vmapped at the end. The paged buffer code is conditionally built with
a new Kconfig that is selected automatically.
Takashi Iwai [Tue, 11 Jun 2019 12:26:24 +0000 (14:26 +0200)]
firmware: Factor out the paged buffer handling code
This is merely a preparation for the upcoming compressed firmware
support and no functional changes. It moves the code to handle the
paged buffer allocation and mapping out of fallback.c into the main
code, so that they can be used commonly.
Sven Van Asbroeck [Mon, 17 Jun 2019 18:23:54 +0000 (14:23 -0400)]
firmware: improve LSM/IMA security behaviour
The firmware loader queries if LSM/IMA permits it to load firmware
via the sysfs fallback. Unfortunately, the code does the opposite:
it expressly permits sysfs fw loading if security_kernel_load_data(
LOADING_FIRMWARE) returns -EACCES. This happens because a
zero-on-success return value is cast to a bool that's true on success.
Fix the return value handling so we get the correct behaviour.
Fixes: 6e852651f28e ("firmware: add call to LSM hook before firmware sysfs fallback") Cc: Stable <stable@vger.kernel.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Kees Cook <keescook@chromium.org>
To: Luis Chamberlain <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: d5ddd5a51726 ("arm: omap1: no need to check return value of debugfs_create functions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When parsing via script, it is important to know if the script
should consider a description as a literal block that should
be displayed as-is, or if the description can be considered
as a normal text.
Change descriptions to ensure that the preceding line of a table
ends with a colon. That makes easy to identify the need of a
literal block.
Kimberly Brown [Fri, 7 Jun 2019 17:40:41 +0000 (13:40 -0400)]
f2fs: replace ktype default_attrs with default_groups
The kobj_type default_attrs field is being replaced by the
default_groups field. Replace the default_attrs fields in f2fs_sb_ktype
and f2fs_feat_ktype with default_groups. Use the ATTRIBUTE_GROUPS macro
to create f2fs_groups and f2fs_feat_groups.
Kimberly Brown [Wed, 8 May 2019 01:48:05 +0000 (21:48 -0400)]
dlm: Replace default_attrs in dlm_ktype with default_groups
The kobj_type default_attrs field is being replaced by the
default_groups field, so replace the default_attrs field in dlm_ktype
with default_groups. Use the ATTRIBUTE_GROUPS macro to create
dlm_groups.
Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kimberly Brown [Wed, 8 May 2019 20:07:48 +0000 (16:07 -0400)]
ext4: replace ktype default_attrs with default_groups
The kobj_type default_attrs field is being replaced by the
default_groups field. Replace the default_attrs field in ext4_sb_ktype
and ext4_feat_ktype with default_groups. Use the ATTRIBUTE_GROUPS macro
to create ext4_groups and ext4_feat_groups.
Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kimberly Brown [Fri, 7 Jun 2019 18:23:00 +0000 (14:23 -0400)]
gfs2: replace ktype default_attrs with default_groups
The kobj_type default_attrs field is being replaced by the
default_groups field. Replace the default_attrs field in gfs2_ktype
with default_groups. Use the ATTRIBUTE_GROUPS macro to create
gfs2_groups.
Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 11 Jun 2019 18:45:03 +0000 (20:45 +0200)]
ti-st: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 11 Jun 2019 18:32:13 +0000 (20:32 +0200)]
lkdtm: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 11 Jun 2019 18:55:28 +0000 (20:55 +0200)]
vmw_balloon: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Takashi Iwai [Mon, 20 May 2019 09:26:45 +0000 (11:26 +0200)]
firmware: Use kvmalloc for page tables
This is a minor optimization to use kvmalloc() variant for allocating
the page table for the SG-buffer. They aren't so big in general, so
kmalloc() would fit often better.
Takashi Iwai [Mon, 20 May 2019 09:26:43 +0000 (11:26 +0200)]
firmware: Free temporary page table after vmapping
Once after performing vmap() to map the S/G pages, our own page table
becomes superfluous since the pages can be released via vfree()
automatically. Let's change the buffer release code and discard the
page table array for saving some memory.
Anders Roxell [Wed, 5 Jun 2019 01:57:39 +0000 (18:57 -0700)]
mm/zsmalloc.c: remove unused variable
The variable 'entry' is no longer used and the compiler rightly complains
that it should be removed.
../mm/zsmalloc.c: In function `zs_pool_stat_create':
../mm/zsmalloc.c:648:17: warning: unused variable `entry' [-Wunused-variable]
struct dentry *entry;
^~~~~
Rework to remove the unused variable.
Link: http://lkml.kernel.org/r/20190604065826.26064-1-anders.roxell@linaro.org Fixes: 4268509a36a7 ("zsmalloc: no need to check return value of debugfs_create functions") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
debugfs: make debugfs_create_u32_array() return void
The single user of debugfs_create_u32_array() does not care about the
return value of it, so make it return void as there is no need to do
anything with the return value.
Greg Kroah-Hartman [Fri, 4 Jan 2019 13:25:20 +0000 (14:25 +0100)]
btrfs: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: David Sterba <dsterba@suse.com> Cc: linux-btrfs@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mailbox: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 22 Jan 2019 15:21:48 +0000 (16:21 +0100)]
gcov: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Also delete the dentry variable as it is never needed.
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 22 Jan 2019 14:35:38 +0000 (15:35 +0100)]
x86: kdebugfs: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 22 Jan 2019 14:35:41 +0000 (15:35 +0100)]
x86: platform: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 22 Jan 2019 14:35:40 +0000 (15:35 +0100)]
x86: mm: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 22 Jan 2019 14:41:12 +0000 (15:41 +0100)]
arm: dump: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Russell King <linux@armlinux.org.uk> Cc: Jinbum Park <jinb.park7@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 22 Jan 2019 14:41:14 +0000 (15:41 +0100)]
arm: omap2: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Kevin Hilman <khilman@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 22 Jan 2019 14:41:13 +0000 (15:41 +0100)]
arm: omap1: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Paul Walmsley <paul@pwsan.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Russell King <linux@armlinux.org.uk> Cc: Kevin Hilman <khilman@kernel.org> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 22 Jan 2019 14:35:42 +0000 (15:35 +0100)]
x86: xen: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 22 Jan 2019 15:21:07 +0000 (16:21 +0100)]
backing-dev: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
And as the return value does not matter at all, no need to save the
dentry in struct backing_dev_info, so delete it.
Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Michal Hocko <mhocko@suse.com> Cc: linux-mm@kvack.org Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 22 Jan 2019 15:21:11 +0000 (16:21 +0100)]
mm: cleancache: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 22 Jan 2019 15:21:46 +0000 (16:21 +0100)]
kprobes: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 22 Jan 2019 15:21:44 +0000 (16:21 +0100)]
fail_function: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Kees Cook <keescook@chromium.org> Cc: Josef Bacik <jbacik@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com> Cc: zhong jiang <zhongjiang@huawei.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 22 Jan 2019 14:50:30 +0000 (15:50 +0100)]
sh: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 22 Jan 2019 15:21:10 +0000 (16:21 +0100)]
hwpoison-inject: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 22 Jan 2019 15:21:12 +0000 (16:21 +0100)]
mm: kmemleak: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 22 Jan 2019 15:21:09 +0000 (16:21 +0100)]
zsmalloc: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 22 Jan 2019 15:21:41 +0000 (16:21 +0100)]
blktrace: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 22 Jan 2019 15:21:40 +0000 (16:21 +0100)]
trace: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Greg Kroah-Hartman [Tue, 22 Jan 2019 15:21:08 +0000 (16:21 +0100)]
zswap: ignore debugfs_create_dir() return value
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Linus Torvalds [Sun, 2 Jun 2019 18:10:01 +0000 (11:10 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two fixes: a quirk for KVM guests running on certain AMD CPUs, and a
KASAN related build fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor
x86/boot: Provide KASAN compatible aliases for string routines
Linus Torvalds [Sun, 2 Jun 2019 18:08:12 +0000 (11:08 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"On the kernel side there's a bunch of ring-buffer ordering fixes for a
reproducible bug, plus a PEBS constraints regression fix.
Plus tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools headers UAPI: Sync kvm.h headers with the kernel sources
perf record: Fix s390 missing module symbol and warning for non-root users
perf machine: Read also the end of the kernel
perf test vmlinux-kallsyms: Ignore aliases to _etext when searching on kallsyms
perf session: Add missing swap ops for namespace events
perf namespace: Protect reading thread's namespace
tools headers UAPI: Sync drm/drm.h with the kernel
tools headers UAPI: Sync drm/i915_drm.h with the kernel
tools headers UAPI: Sync linux/fs.h with the kernel
tools headers UAPI: Sync linux/sched.h with the kernel
tools arch x86: Sync asm/cpufeatures.h with the with the kernel
tools include UAPI: Update copy of files related to new fspick, fsmount, fsconfig, fsopen, move_mount and open_tree syscalls
perf arm64: Fix mksyscalltbl when system kernel headers are ahead of the kernel
perf data: Fix 'strncat may truncate' build failure with recent gcc
perf/ring-buffer: Use regular variables for nesting
perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data
perf/ring_buffer: Add ordering to rb->nest increment
perf/ring_buffer: Fix exposing a temporarily decreased data_head
perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints
Linus Torvalds [Sun, 2 Jun 2019 18:06:13 +0000 (11:06 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Two EFI fixes: a quirk for weird systabs, plus add more robust error
handling in the old 1:1 mapping code"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Allow the number of EFI configuration tables entries to be zero
efi/x86/Add missing error handling to old_memmap 1:1 mapping code
Linus Torvalds [Sun, 2 Jun 2019 17:22:38 +0000 (10:22 -0700)]
Merge tag 'spdx-5.2-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull SPDX fixes from Greg KH:
"Here are just two small patches, that fix up some found SPDX
identifier issues.
The first patch fixes an error in a previous SPDX fixup patch, that
causes build errors when doing 'make clean' on the tree (the fact that
almost no one noticed it reflects the fact that kernel developers
don't like doing that option very often...)
The second patch fixes up a number of places in the tree where people
mistyped the string "SPDX-License-Identifier". Given that people can
not even type their own name all the time without mistakes, this was
bound to happen, and odds are, we will have to add some type of check
for this to checkpatch.pl to catch this happening in the future.
Both of these have passed testing by 0-day"
* tag 'spdx-5.2-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
treewide: fix typos of SPDX-License-Identifier
crypto: ux500 - fix license comment syntax error
Linus Torvalds [Sun, 2 Jun 2019 17:21:04 +0000 (10:21 -0700)]
Merge tag 'powerpc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A minor fix to our IMC PMU code to print a less confusing error
message when the driver can't initialise properly.
A fix for a bug where a user requesting an unsupported branch sampling
filter can corrupt PMU state, preventing the PMU from counting
properly.
And finally a fix for a bug in our support for kexec_file_load(),
which prevented loading a kernel and initramfs. Most versions of kexec
don't yet use kexec_file_load().
Thanks to: Anju T Sudhakar, Dave Young, Madhavan Srinivasan, Ravi
Bangoria, Thiago Jung Bauermann"
* tag 'powerpc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kexec: Fix loading of kernel + initramfs with kexec_file_load()
powerpc/perf: Fix MMCRA corruption by bhrb_filter
powerpc/powernv: Return for invalid IMC domain
Linus Torvalds [Sun, 2 Jun 2019 17:19:39 +0000 (10:19 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Fixes for PPC and s390"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: PPC: Book3S HV: Restore SPRG3 in kvmhv_p9_guest_entry()
KVM: PPC: Book3S HV: Fix lockdep warning when entering guest on POWER9
KVM: PPC: Book3S HV: XIVE: Fix page offset when clearing ESB pages
KVM: PPC: Book3S HV: XIVE: Take the srcu read lock when accessing memslots
KVM: PPC: Book3S HV: XIVE: Do not clear IRQ data of passthrough interrupts
KVM: PPC: Book3S HV: XIVE: Introduce a new mutex for the XIVE device
KVM: PPC: Book3S HV: XIVE: Fix the enforced limit on the vCPU identifier
KVM: PPC: Book3S HV: XIVE: Do not test the EQ flag validity when resetting
KVM: PPC: Book3S HV: XIVE: Clear file mapping when device is released
KVM: PPC: Book3S HV: Don't take kvm->lock around kvm_for_each_vcpu
KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list
KVM: PPC: Book3S HV: Use new mutex to synchronize MMU setup
KVM: PPC: Book3S HV: Avoid touching arch.mmu_ready in XIVE release functions
KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_ID
kvm: fix compile on s390 part 2
projects / users / dwmw2 / linux.git / log