The kselftests test running infrastructure expects tests to finish with an
exit code of 4 if the test decided it should be skipped. Currently
eeh-basic.sh exits with the number of devices that failed to recover, so if
four devices didn't recover we'll report a skip instead of a fail.
Fix this by checking if the return code is non-zero and report success
and failure by returning 0 or 1 respectively. For the cases where should
actually skip return 4.
The changes referenced below replaced sbk_clone)_ by taking additional
references, passing the skb along and then freeing the skb. This
deleted the packets before they could be processed and additionally
passed bad data in each packet. Since pkt is stored in skb->cb
changing pkt->qp changed it for all the packets.
Replace skb_get() by sbk_clone() in rxe_rcv_mcast_pkt() for cases where
multiple QPs are receiving multicast packets on the same address.
Delete kfree_skb() because the packets need to live until they have been
processed by each QP. They are freed later.
Fixes: 86af61764151 ("IB/rxe: remove unnecessary skb_clone") Fixes: fe896ceb5772 ("IB/rxe: replace refcount_inc with skb_get") Link: https://lore.kernel.org/r/20201008203651.256958-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
An incorrect sizeof is being used, struct rvt_ibport ** is not correct, it
should be struct rvt_ibport *. Note that since ** is the same size as
* this is not causing any issues. Improve this fix by using
sizeof(*rdi->ports) as this allows us to not even reference the type
of the pointer. Also remove line breaks as the entire statement can
fit on one line.
Link: https://lore.kernel.org/r/20201008095204.82683-1-colin.king@canonical.com
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)") Fixes: ff6acd69518e ("IB/rdmavt: Add device structure allocation") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The patch avoids allocating cpufreq_policy on stack hence fixing frame
size overflow in 'powernv_cpufreq_reboot_notifier':
drivers/cpufreq/powernv-cpufreq.c: In function powernv_cpufreq_reboot_notifier:
drivers/cpufreq/powernv-cpufreq.c:906:1: error: the frame size of 2064 bytes is larger than 2048 bytes
Fixes: cf30af76 ("cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec") Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200922080254.41497-1-srikar@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 9e9f60108423f ("powerpc/perf/{hv-gpci, hv-common}: generate
requests with counters annotated") adds a framework for defining
gpci counters.
In this patch, they adds starting_index value as '0xffffffffffffffff'.
which is wrong as starting_index is of size 32 bits.
Because of this, incase we try to run hv-gpci event we get error.
In power9 machine:
command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
-C 0 -I 1000
event syntax error: '..bie_count_and_time_tlbie_instructions_issued/'
\___ value too big for format, maximum is 4294967295
This patch fix this issue and changes starting_index value to '0xffffffff'
PMU counter support functions enforces event constraints for group of
events to check if all events in a group can be monitored. Incase of
event codes using PMC5 and PMC6 ( 500fa and 600f4 respectively ), not
all constraints are applicable, say the threshold or sample bits. But
current code includes pmc5 and pmc6 in some group constraints (like
IC_DC Qualifier bits) which is actually not applicable and hence
results in those events not getting counted when scheduled along with
group of other events. Patch fixes this by excluding PMC5/6 from
constraints which are not relevant for it.
The various array_size functions use SIZE_MAX define, but missed limits.h
causes to failure to compile code that needs overflow.h.
In file included from drivers/infiniband/core/uverbs_std_types_device.c:6:
./include/linux/overflow.h: In function 'array_size':
./include/linux/overflow.h:258:10: error: 'SIZE_MAX' undeclared (first use in this function)
258 | return SIZE_MAX;
| ^~~~~~~~
Currently using forward search doesn't handle multi-line strings correctly.
The search routine replaces line breaks with \0 during the search and, for
regular searches ("help | grep Common\n"), there is code after the line
has been discarded or printed to replace the break character.
However during a pager search ("help\n" followed by "/Common\n") when the
string is matched we will immediately return to normal output and the code
that should restore the \n becomes unreachable. Fix this by restoring the
replaced character when we disable the search mode and update the comment
accordingly.
Fixes: fb6daa7520f9d ("kdb: Provide forward search at more prompt") Link: https://lore.kernel.org/r/20200909141708.338273-1-daniel.thompson@linaro.org Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The following GigaDevice chips have the QE BIT in the feature flags, I
checked the datasheets, but did not try this.
* GD5F1GQ4xExxG
* GD5F1GQ4xFxxG
* GD5F1GQ4UAYIG
* GD5F4GQ4UAYIG
The Quad operations like 0xEB mention that the QE bit has to be set.
The rnr_retry returned to the user is not correct, it should be got from
another fields in QPC.
Fixes: bfe860351e31 ("RDMA/hns: Fix cast from or to restricted __le32 for driver") Link: https://lore.kernel.org/r/1600509802-44382-7-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some metrics (such as DRAM_BW_Use) consists of uncore events and
duration_time. For uncore events, counter->core.system_wide is true. But
for duration_time, counter->core.system_wide is false so
target.system_wide is set to false.
Then 'enable_on_exec' is set in perf_event_attr of uncore event. Kernel
will return error when trying to open the uncore event.
This patch skips the duration_time in setup_system_wide then
target.system_wide will be set to true for the evlist of uncore events +
duration_time.
Before (tested on skylake desktop):
# perf stat -M DRAM_BW_Use -- sleep 1
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (arb/event=0x84,umask=0x1/).
/bin/dmesg | grep -i perf may provide additional information.
Fixes: e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200922015004.30114-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Occasionally ib_write_bw crash is seen due to access of a pd object in
i40iw_sc_qp_destroy after it is freed. Destroy qp is not synchronous in
i40iw and thus the iwqp object could be referencing a pd object that is
freed by ib core as a result of successful return from i40iw_destroy_qp.
Wait in i40iw_destroy_qp till all QP references are released and destroy
the QP and its associated resources before returning. Switch to use the
refcount API vs atomic API for lifetime management of the qp.
set_reg_wr() always fails if !umr_modify_entity_size_disabled because
mlx5_ib_can_use_umr() always fails. Without set_reg_wr() IB_WR_REG_MR
doesn't work and that means the device should not advertise
IB_DEVICE_MEM_MGT_EXTENSIONS.
Fixes: 841b07f99a47 ("IB/mlx5: Block MR WR if UMR is not possible") Link: https://lore.kernel.org/r/20200914112653.345244-5-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A context_switch event can have no tid because pids can be detached from
a task while the task is still running (in do_exit()). Note this won't
happen with per-task contexts because then tracing stops at
perf_event_exit_task()
If a task with no tid gets preempted, or a dying task gets preempted and
its parent releases it, when it subsequently gets switched back in,
Intel PT will not be able to determine what task is running and prints
an error "context_switch event has no tid". However, it is not really an
error because the task is in kernel space and the decoder can continue
to decode successfully. Fix by changing the error to be only a logged
message, and make allowance for tid == -1.
Example:
Using 5.9-rc4 with Preemptible Kernel (Low-Latency Desktop) e.g.
$ uname -r
5.9.0-rc4
$ grep PREEMPT .config
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
CONFIG_PREEMPT_RCU=y
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DEBUG_PREEMPT=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
Commit 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of
single-threaded mm_cpumask") added a mechanism to trim the mm_cpumask of
a process under certain conditions. One of the assumptions is that
mm_users would not be incremented via a reference outside the process
context with mmget_not_zero() then go on to kthread_use_mm() via that
reference.
That invariant was broken by io_uring code (see previous sparc64 fix),
but I'll point Fixes: to the original powerpc commit because we are
changing that assumption going forward, so this will make backports
match up.
Fix this by no longer relying on that assumption, but by having each CPU
check the mm is not being used, and clearing their own bit from the mask
only if it hasn't been switched-to by the time the IPI is processed.
This relies on commit 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB
invalidate") and ARCH_WANT_IRQS_OFF_ACTIVATE_MM to disable irqs over mm
switch sequences.
Fixes: 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Depends-on: 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB invalidate") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200914045219.3736466-5-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Resolve this problem by disabling each THRMn comparator when handling
the associated THRMn interrupt and by disabling the TAU entirely when
updating THRMn thresholds.
According to Freescale's documentation, MPC74XX processors have an
erratum that prevents the TAU interrupt from working, so don't try to
use it when running on those processors.
The commentary at the call site seems to disagree with the code. The
conditional prevents calling set_thresholds() via the exception handler,
which appears to crash. Perhaps that's because it immediately triggers
another TAU exception. Anyway, calling set_thresholds() from TAUupdate()
is redundant because tau_timeout() does so.
Since commit 19dbdcb8039cf ("smp: Warn on function calls from softirq
context") the Thermal Assist Unit driver causes a warning like the
following when CONFIG_SMP is enabled.
According to the MPC750 Users Manual, the SITV value in Thermal
Management Register 3 is 13 bits long. The present code calculates the
SITV value as 60 * 500 cycles. This would overflow to give 10 us on
a 500 MHz CPU rather than the intended 60 us. (But according to the
Microprocessor Datasheet, there is also a factor of 266 that has to be
applied to this value on certain parts i.e. speed sort above 266 MHz.)
Always use the maximum cycle count, as recommended by the Datasheet.
With commit: 0034d395f89d ("powerpc/mm/hash64: Map all the kernel
regions in the same 0xc range"), we now split the 64TB address range
into 4 contexts each of 16TB. That implies we can do only 16TB linear
mapping.
On some systems, eg. Power9, memory attached to nodes > 0 will appear
above 16TB in the linear mapping. This resulted in kernel crash when
we boot such systems in hash translation mode with 4K PAGE_SIZE.
This patch updates the kernel mapping such that we now start supporting upto
61TB of memory with 4K. The kernel mapping now looks like below 4K PAGE_SIZE
and hash translation.
Our MAX_PHYSMEM_BITS for 4K is still 64TB even though we can only map 61TB.
We prevent bolt mapping anything outside 61TB range by checking against
H_VMALLOC_START.
Fixes: 0034d395f89d ("powerpc/mm/hash64: Map all the kernel regions in the same 0xc range") Reported-by: Cameron Berkenpas <cam@neo-zeon.de> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200608070904.387440-3-aneesh.kumar@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 59e8970b3798 ("RDMA/qedr: Return max inline data in QP query
result") changed query_qp max_inline size to return the max roce inline
size. When iwarp was introduced, this should have been modified to return
the max inline size based on protocol. This size is cached in the device
attributes
Fixes: 69ad0e7fe845 ("RDMA/qedr: Add support for iWARP in user space") Link: https://lore.kernel.org/r/20200902165741.8355-8-michal.kalderon@marvell.com Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
rdma_for_each_block() makes assumptions about how the SGL is constructed
that don't work if the block size is below the page size used to to build
the SGL.
The rules for umem SGL construction require that the SG's all be PAGE_SIZE
aligned and we don't encode the actual byte offset of the VA range inside
the SGL using offset and length. So rdma_for_each_block() has no idea
where the actual starting/ending point is to compute the first/last block
boundary if the starting address should be within a SGL.
Fixing the SGL construction turns out to be really hard, and will be the
subject of other patches. For now block smaller pages.
Fixes: 4a35339958f1 ("RDMA/umem: Add API to find best driver supported page size in an MR") Link: https://lore.kernel.org/r/2-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is possible for a single SGL to span an aligned boundary, eg if the SGL
is
61440 -> 90112
Then the length is 28672, which currently limits the block size to
32k. With a 32k page size the two covering blocks will be:
32768->65536 and 65536->98304
However, the correct answer is a 128K block size which will span the whole
28672 bytes in a single block.
Instead of limiting based on length figure out which high IOVA bits don't
change between the start and end addresses. That is the highest useful
page size.
Fixes: 4a35339958f1 ("RDMA/umem: Add API to find best driver supported page size in an MR") Link: https://lore.kernel.org/r/1-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix some off-by-one errors in xfs_rtalloc_query_range. The highest key
in the realtime bitmap is always one less than the number of rt extents,
which means that the key clamp at the start of the function is wrong.
The 4th argument to xfs_rtfind_forw is the highest rt extent that we
want to probe, which means that passing 1 less than the high key is
wrong. Finally, drop the rem variable that controls the loop because we
can compare the iteration point (rtstart) against the high key directly.
The sordid history of this function is that the original commit (fb3c3)
incorrectly passed (high_rec->ar_startblock - 1) as the 'limit' parameter
to xfs_rtfind_forw. This was wrong because the "high key" is supposed
to be the largest key for which the caller wants result rows, not the
key for the first row that could possibly be outside the range that the
caller wants to see.
A subsequent attempt (8ad56) to strengthen the parameter checking added
incorrect clamping of the parameters to the number of rt blocks in the
system (despite the bitmap functions all taking units of rt extents) to
avoid querying ranges past the end of rt bitmap file but failed to fix
the incorrect _rtfind_forw parameter. The original _rtfind_forw
parameter error then survived the conversion of the startblock and
blockcount fields to rt extents (a0e5c), and the most recent off-by-one
fix (a3a37) thought it was patching a problem when the end of the rt
volume is not in use, but none of these fixes actually solved the
original problem that the author was confused about the "limit" argument
to xfs_rtfind_forw.
Sadly, all four of these patches were written by this author and even
his own usage of this function and rt testing were inadequate to get
this fixed quickly.
Original-problem: fb3c3de2f65c ("xfs: add a couple of queries to iterate free extents in the rtbitmap") Not-fixed-by: 8ad560d2565e ("xfs: strengthen rtalloc query range checks") Not-fixed-by: a0e5c435babd ("xfs: fix xfs_rtalloc_rec units") Fixes: a3a374bf1889 ("xfs: fix off-by-one error in xfs_rtalloc_query_range") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Refactor xfs_getfsmap to improve its performance: instead of indirectly
calling a function that copies one record to userspace at a time, create
a shadow buffer in the kernel and copy the whole array once at the end.
On the author's computer, this reduces the runtime on his /home by ~20%.
This also eliminates a deadlock when running GETFSMAP against the
realtime device. The current code locks the rtbitmap to create
fsmappings and copies them into userspace, having not released the
rtbitmap lock. If the userspace buffer is an mmap of a sparse file that
itself resides on the realtime device, the write page fault will recurse
into the fs for allocation, which will deadlock on the rtbitmap lock.
Fixes: 4c934c7dd60c ("xfs: report realtime space information via the rtbitmap") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If userspace asked fsmap to count the number of entries, we cannot
return more than UINT_MAX entries because fmh_entries is u32.
Therefore, stop counting if we hit this limit or else we will waste time
to return truncated results.
Fixes: e89c041338ed ("xfs: implement the GETFSMAP ioctl") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a bitmap needs to be allocated, and then by the time the thread
is scheduled to be run again all the indices which would satisfy the
allocation have been allocated then we would leak the allocation. Almost
impossible to hit in practice, but a trivial fix. Found by Coverity.
When ARC_SOC_HSDK is enabled and RESET_CONTROLLER is disabled, it results
in the following Kbuild warning:
WARNING: unmet direct dependencies detected for RESET_HSDK
Depends on [n]: RESET_CONTROLLER [=n] && HAS_IOMEM [=y] && (ARC_SOC_HSDK [=y] || COMPILE_TEST [=n])
Selected by [y]:
- ARC_SOC_HSDK [=y] && ISA_ARCV2 [=y]
The reason is that ARC_SOC_HSDK selects RESET_HSDK without depending on or
selecting RESET_CONTROLLER while RESET_HSDK is subordinate to
RESET_CONTROLLER.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
The L310_PREFETCH_CTRL register bits 28 and 29 to enable data and
instruction prefetch respectively can also be accessed via the
L2X0_AUX_CTRL register. They appear to be actually wired together in
hardware between the registers. Changing them in the prefetch
register only will get undone when restoring the aux control register
later on. For this reason, set these bits in both registers during
initialisation according to the devicetree property values.
At memory hot-remove time we can retrieve an LMB's nid from its
corresponding memory_block. There is no need to store the nid
in multiple locations.
Note that lmb_to_memblock() uses find_memory_block() to get the
corresponding memory_block. As find_memory_block() runs in sub-linear
time this approach is negligibly slower than what we do at present.
In exchange for this lookup at hot-remove time we no longer need to
call memory_add_physaddr_to_nid() during drmem_init() for each LMB.
On powerpc, memory_add_physaddr_to_nid() is a linear search, so this
spares us an O(n^2) initialization during boot.
On systems with many LMBs that initialization overhead is palpable and
disruptive. For example, on a box with 249854 LMBs we're seeing
drmem_init() take upwards of 30 seconds to complete:
With a patched kernel on the same machine we're no longer seeing the
soft lockup. drmem_init() now completes in negligible time, even when
the LMB count is large.
Fixes: b2d3b5ee66f2 ("powerpc/pseries: Track LMB nid instead of using device tree") Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com> Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200811015115.63677-1-cheloha@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The drmem lmb list can have hundreds of thousands of entries, and
unfortunately lookups take the form of linear searches. As long as
this is the case, traversals have the potential to monopolize the CPU
and provoke lockup reports, workqueue stalls, and the like unless
they explicitly yield.
Rather than placing cond_resched() calls within various
for_each_drmem_lmb() loop blocks in the code, put it in the iteration
expression of the loop macro itself so users can't omit it.
Introduce a drmem_lmb_next() iteration helper function which calls
cond_resched() at a regular interval during array traversal. Each
iteration of the loop in DLPAR code paths can involve around ten RTAS
calls which can each take up to 250us, so this ensures the check is
performed at worst every few milliseconds.
Fixes: 6c6ea53725b3 ("powerpc/mm: Separate ibm, dynamic-memory data from DT format") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200813151131.2070161-1-nathanl@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The original function returns unsigned long and 0 on failure.
Fixes: 4a35339958f1 ("RDMA/umem: Add API to find best driver supported page size in an MR") Link: https://lore.kernel.org/r/0-v1-982a13cc5c6d+501ae-fix_best_pgsz_stub_jgg@nvidia.com Reviewed-by: Gal Pressman <galpress@amazon.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It should be considered an illegal operation if the ULP attempts to modify
a QP from another state to the current hardware state. Otherwise, the ULP
can modify some fields of QPC at any time. For example, for a QP in state
of RTS, modify it from RTR to RTS can change the PSN, which is always not
as expected.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver") Link: https://lore.kernel.org/r/1598353674-24270-1-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Building lpddr2_nvm with clang can result in a giant stack usage
in one function:
drivers/mtd/lpddr/lpddr2_nvm.c:399:12: error: stack frame size of 1144 bytes in function 'lpddr2_nvm_probe' [-Werror,-Wframe-larger-than=]
The problem is that clang decides to build a copy of the mtd_info
structure on the stack and then do a memcpy() into the actual version. It
shouldn't really do it that way, but it's not strictly a bug either.
As a workaround, use a static const version of the structure to assign
most of the members upfront and then only set the few members that
require runtime knowledge at probe time.
All entry points to the rdma_cm from a ULP must be single threaded,
even this error unwinds. Add the missing locking.
Fixes: 7c11910783a1 ("RDMA/ucma: Put a lock around every call to the rdma_cm layer") Link: https://lore.kernel.org/r/20200818120526.702120-11-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This value is locked under the file->mut, ensure it is held whenever
touching it.
The case in ucma_migrate_id() is a race, while in ucma_free_uctx() it is
already not possible for the write side to run, the movement is just for
clarity.
Fixes: 88314e4dda1e ("RDMA/cma: add support for rdma_migrate_id()") Link: https://lore.kernel.org/r/20200818120526.702120-10-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Both of_find_compatible_node() and of_find_node_by_type() will return
a refcounted node on success - thus for the success path the node must
be explicitly released with a of_node_put().
The call to of_find_compatible_node() returns a node pointer with
refcount incremented thus it must be explicitly decremented here
before returning.
Fixes: a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1530522496-14816-1-git-send-email-hofrat@osadl.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The mlx4 driver will proxy MAD packets through the PF driver. A VM or an
instantiated VF will send its MAD packets to the PF driver using
loop-back. The PF driver will be informed by an interrupt, but defer the
handling and polling of CQEs to a worker thread running on an ordered
work-queue.
Consider the following scenario: the VMs will in short proximity in time,
for example due to a network event, send many MAD packets to the PF
driver. Lets say there are K VMs, each sending N packets.
The interrupt from the first VM will start the worker thread, which will
poll N CQEs. A common case here is where the PF driver will multiplex the
packets received from the VMs out on the wire QP.
But before the wire QP has returned a send CQE and associated interrupt,
the other K - 1 VMs have sent their N packets as well.
The PF driver has to multiplex K * N packets out on the wire QP. But the
send-queue on the wire QP has a finite capacity.
So, in this scenario, if K * N is larger than the send-queue capacity of
the wire QP, we will get MAD packets dropped on the floor with this
dynamic debug message:
mlx4_ib_multiplex_mad: failed sending GSI to wire on behalf of slave 2 (-11)
and this despite the fact that the wire send-queue could have capacity,
but the PF driver isn't aware, because the wire send CQEs have not yet
been polled.
We can also have a similar scenario inbound, with a wire recv-queue larger
than the tunnel QP's send-queue. If many remote peers send MAD packets to
the very same VM, the tunnel send-queue destined to the VM could allegedly
be construed to be full by the PF driver.
This starvation is fixed by introducing separate work queues for the wire
QPs vs. the tunnel QPs.
With this fix, using a dual ported HCA, 8 VFs instantiated, we could run
cmtime on each of the 18 interfaces towards a similar configured peer,
each cmtime instance with 800 QPs (all in all 14400 QPs) without a single
CM packet getting lost.
Boardinfo was lost if I3C object for devices with boardinfo
available are not created or not added to the I3C device list
because of some failure e.g. SETDASA failed, retrieve info failed etc
This patch adds i3c_master_attach_boardinfo which scan boardinfo list
in the master object and 'attach' it to the I3C device object.
This test uses waking+wakeup_latency as an event name, which doesn't
make sense since it includes an operator. Illegal names are now
detected by the synthetic event command parsing, which causes this
test to fail. Change the name to 'waking_plus_wakeup_latency' to
prevent this.
Fix data race in prepend_path() with re-reading mnt->mnt_ns twice
without holding the lock.
is_mounted() does check for NULL, but is_anon_ns(mnt->mnt_ns) might
re-read the pointer again which could be NULL already, if in between
reads one of kern_unmount()/kern_unmount_array()/umount_tree() sets
mnt->mnt_ns to NULL.
This is seen in production with the following stack trace:
Currently __set_oom_adj loops through all processes in the system to keep
oom_score_adj and oom_score_adj_min in sync between processes sharing
their mm. This is done for any task with more that one mm_users, which
includes processes with multiple threads (sharing mm and signals).
However for such processes the loop is unnecessary because their signal
structure is shared as well.
Android updates oom_score_adj whenever a tasks changes its role
(background/foreground/...) or binds to/unbinds from a service, making it
more/less important. Such operation can happen frequently. We noticed
that updates to oom_score_adj became more expensive and after further
investigation found out that the patch mentioned in "Fixes" introduced a
regression. Using Pixel 4 with a typical Android workload, write time to
oom_score_adj increased from ~3.57us to ~362us. Moreover this regression
linearly depends on the number of multi-threaded processes running on the
system.
Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with
(CLONE_VM && !CLONE_THREAD && !CLONE_VFORK). Change __set_oom_adj to use
MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj
update should be synchronized between multiple processes. To prevent
races between clone() and __set_oom_adj(), when oom_score_adj of the
process being cloned might be modified from userspace, we use
oom_adj_mutex. Its scope is changed to global.
The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for
the case of vfork(). To prevent performance regressions of vfork(), we
skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is
specified. Clearing the MMF_MULTIPROCESS flag (when the last process
sharing the mm exits) is left out of this patch to keep it simple and
because it is believed that this threading model is rare. Should there
ever be a need for optimizing that case as well, it can be done by hooking
into the exit path, likely following the mm_update_next_owner pattern.
With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being
quite rare, the regression is gone after the change is applied.
[surenb@google.com: v3] Link: https://lkml.kernel.org/r/20200902012558.2335613-1-surenb@google.com Fixes: 44a70adec910 ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj") Reported-by: Tim Murray <timmurray@google.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Christian Kellner <christian@kellner.me> Cc: Adrian Reber <areber@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Cc: Michel Lespinasse <walken@google.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: John Johansen <john.johansen@canonical.com> Cc: Yafang Shao <laoar.shao@gmail.com> Link: https://lkml.kernel.org/r/20200824153036.3201505-1-surenb@google.com Debugged-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The code in mc_handle_swap_pte() checks for non_swap_entry() and returns
NULL before checking is_device_private_entry() so device private pages are
never handled. Fix this by checking for non_swap_entry() after handling
device private swap PTEs.
I assume the memory cgroup accounting would be off somehow when moving
a process to another memory cgroup. Currently, the device private page
is charged like a normal anonymous page when allocated and is uncharged
when the page is freed so I think that path is OK.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ira Weiny <ira.weiny@intel.com> Link: https://lkml.kernel.org/r/20201009215952.2726-1-rcampbell@nvidia.com
xFixes: c733a82874a7 ("mm/memcontrol: support MEMORY_DEVICE_PRIVATE") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Dump vlan tag and proto for the usual vlan offload case if the
NF_LOG_MACDECODE flag is set on. Without this information the logging is
misleading as there is no reference to the VLAN header.
Fixes: 83e96d443b37 ("netfilter: log: split family specific code to nf_log_{ip,ip6,common}.c files") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
fq qdisc requires tstamp to be cleared in forwarding path
Reported-by: Evgeny B <abt-admin@mail.ru> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209427 Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 8203e2d844d3 ("net: clear skb->tstamp in forwarding paths") Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC") Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time.") Signed-off-by: Julian Anastasov <ja@ssi.bg> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
sdio.c:2403:3: warning: Attempt to free released memory
kfree(card->mpa_rx.buf);
^~~~~~~~~~~~~~~~~~~~~~~
When mwifiex_init_sdio() fails in its first call to
mwifiex_alloc_sdio_mpa_buffer, it falls back to calling it
again. If the second alloc of mpa_tx.buf fails, the error
handler will try to free the old, previously freed mpa_rx.buf.
Reviewing the code, it looks like a second double free would
happen with mwifiex_cleanup_sdio().
So set both pointers to NULL when they are freed.
Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201004131931.29782-1-trix@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Remove PSU EEPROM configuration for systems class equipped with
Mellanox chip Spectrume-2. Till now all the systems from this class
used few types of power units, all equipped with EEPROM device with
address space two bytes. Thus, all these devices have been handled by
EEPROM driver "24c32".
There is a new requirement is to support power unit replacement by "off
the shelf" device, matching electrical required parameters. Such device
could be equipped with different EEPROM type, which could be one byte
address space addressing or even could be not equipped with EEPROM.
In such case "24c32" will not work.
Fixes: 1bd42d94ccab ("platform/x86: mlx-platform: Add support for new 200G IB and Ethernet systems") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200923172053.26296-2-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The be_fill_queue() function can only fail when "eq_vaddress" is NULL and
since it's non-NULL here that means the function call can't fail. But
imagine if it could, then in that situation we would want to store the
"paddr" so that dma memory can be released.
Link: https://lore.kernel.org/r/20200928091300.GD377727@mwanda Fixes: bfead3b2cb46 ("[SCSI] be2iscsi: Adding msix and mcc_rings V3") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Corrects drivers/target/target_core_user.c:688:6: warning: 'page' may be
used uninitialized.
Link: https://lore.kernel.org/r/20200924001920.43594-1-john.p.donnelly@oracle.com Fixes: 3c58f737231e ("scsi: target: tcmu: Optimize use of flush_dcache_page") Cc: Mike Christie <michael.christie@oracle.com> Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In DDMA mode if INTR OUT transfers mps not multiple of 4 then single packet
corresponds to single descriptor.
Descriptor limit set to mps and desc chain limit set to mps *
MAX_DMA_DESC_NUM_GENERIC. On that descriptors complete, to calculate
transfer size should be considered correction value for each descriptor.
In start request function, if "continue" is true then dma buffer address
should be incremmented by offset for all type of transfers, not only for
Control DATA_OUT transfers.
Fixes: cf77b5fb9b394 ("usb: dwc2: gadget: Transfer length limit checking for DDMA") Fixes: e02f9aa6119e0 ("usb: dwc2: gadget: EP 0 specific DDMA programming") Fixes: aa3e8bc81311e ("usb: dwc2: gadget: DDMA transfer start and complete") Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When dumping wiphy information, we try to split the data into
many submessages, but for old userspace we still support the
old mode where this doesn't happen.
However, in this case we were not resetting our state correctly
and dumping multiple messages for each wiphy, which would have
broken such older userspace.
This was broken pretty much immediately afterwards because it
only worked in the original commit where non-split dumps didn't
have any more data than split dumps...
The u_ether driver has a qmult setting that multiplies the
transmit queue length (which by default is 2).
The intent is that it should be enabled at high/super speed, but
because the code does not explicitly check for USB_SUPER_PLUS,
it is disabled at that speed.
Fix this by ensuring that the queue multiplier is enabled for any
wired link at high speed or above. Using >= for USB_SPEED_*
constants seems correct because it is what the gadget_is_xxxspeed
functions do.
The queue multiplier substantially helps performance at higher
speeds. On a direct SuperSpeed Plus link to a Linux laptop,
iperf3 single TCP stream:
Before (qmult=1): 1.3 Gbps
After (qmult=5): 3.2 Gbps
Fixes: 04617db7aa68 ("usb: gadget: add SS descriptors to Ethernet gadget") Reviewed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, SuperSpeed NCM gadgets report a speed of 851 Mbps
in USB_CDC_NOTIFY_SPEED_CHANGE. But the calculation appears to
assume 16 packets per microframe, and USB 3 and above no longer
use microframes.
Maximum speed is actually much higher. On a direct connection,
theoretical throughput is at most 3.86 Gbps for gen1x1 and
9.36 Gbps for gen2x1, and I have seen gadget->host iperf
throughput of >2 Gbps for gen1x1 and >4 Gbps for gen2x1.
Unfortunately the ConnectionSpeedChange defined in the CDC spec
only uses 32-bit values, so we can't report accurate numbers for
10Gbps and above. So, report 3.75Gbps for SuperSpeed (which is
roughly maximum theoretical performance) and 4.25Gbps for
SuperSpeed Plus (which is close to the maximum that we can report
in a 32-bit unsigned integer).
Chasing the callers of enic_dev_wait() revealed the gems of enic_reset()
and enic_tx_hang_reset() which are both invoked through work queues in
order to be able to call rtnl_lock(). So far so good.
After locking rtnl both functions acquire enic::enic_api_lock which
serializes against the (ab)use from infiniband. This is where the
trainwreck starts.
enic::enic_api_lock is a spin_lock() which implicitly disables preemption,
but both functions invoke a ton of functions under that lock which can
sleep. The BUG_ON(in_interrupt()) does not trigger in that case because it
can't detect the preempt disabled condition.
This clearly has never been tested with any of the mandatory debug options
for 7+ years, which would have caught that for sure.
Cure it by adding a enic_api_busy member to struct enic, which is modified
and evaluated with enic::enic_api_lock held.
If enic_api_devcmd_proxy_by_index() observes enic::enic_api_busy as true,
it drops enic::enic_api_lock and busy waits for enic::enic_api_busy to
become false.
It would be smarter to wait for a completion of that busy period, but
enic_api_devcmd_proxy_by_index() is called with other spin locks held which
obviously can't sleep.
Remove the BUG_ON(in_interrupt()) check as well because it's incomplete and
with proper debugging enabled the problem would have been caught from the
debug checks in schedule_timeout().
Fixes: 0b038566c0ea ("drivers/net: enic: Add an interface for USNIC to interact with firmware") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the ADC is runtime suspended and starting a conversion, the stm32-adc
driver calls pm_runtime_get_sync() that gets cascaded to the parent
(e.g. runtime resume of stm32-adc-core driver). This also kicks the
autosuspend delay (e.g. 2s) of the parent.
Once the ADC is active, calling pm_runtime_get_sync() again (upon a new
capture) won't kick the autosuspend delay for the parent (stm32-adc-core
driver) as already active.
Currently, this makes the stm32-adc-core driver go in suspend state
every 2s when doing slow polling. As an example, doing a capture, e.g.
cat in_voltageY_raw at a 0.2s rate, the auto suspend delay for the parent
isn't refreshed. Once it expires, the parent immediately falls into
runtime suspended state, in between two captures, as soon as the child
driver falls into runtime suspend state:
- e.g. after 2s, + child calls pm_runtime_put_autosuspend() + 100ms
autosuspend delay of the child.
- stm32-adc-core switches off regulators, clocks and so on.
- They get switched on back again 100ms later in this example (at 2.2s).
So, use runtime_idle() callback in stm32-adc-core driver to call
pm_runtime_mark_last_busy() for the parent driver (stm32-adc-core),
to avoid this.
Currently if an unsupported iftype is detected the error return path
does not free the cmd_skb leading to a resource leak. Fix this by
free'ing cmd_skb.
Addresses-Coverity: ("Resource leak") Fixes: 805b28c05c8e ("qtnfmac: prepare for AP_VLAN interface type support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200925132224.21638-1-colin.king@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Set up the speed according to crq->query_phys_parms.rsp.speed.
Fix IBMVNIC_10GBPS typo.
Fixes: f8d6ae0d27ec ("ibmvnic: Report actual backing device speed and duplex values") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When coresight_build_path() fails on all the cpus, etm_setup_aux
calls etm_free_aux() to free allocated event_data.
WARN_ON(cpumask_empty(mask) will be triggered since cpu mask is empty.
Check event_data->snk_config is not NULL first to avoid this
warning.
The SRG min and max offset won't present when SRG Information Present of
SR control field of Spatial Reuse Parameter Set element set to 0. Per
spec. IEEE802.11ax D7.0, SRG OBSS PD Min Offset ≤ SRG OBSS PD Max
Offset. Hence fix the constrain check to allow same values in both
offset and also call appropriate nla_get function to read the values.
Fix missing 'kfree_const(cell->name)' when call to
nvmem_cell_info_to_nvmem_cell() in several places:
* after nvmem_cell_info_to_nvmem_cell() failed during
nvmem_add_cells()
* during nvmem_device_cell_{read,write} when cell->name is
kstrdup'ed() without calling kfree_const() at the end, but
really there is no reason to do that 'dup, because the cell
instance is allocated on the stack for some short period to be
read/write without exposing it to the caller.
So the new nvmem_cell_info_to_nvmem_cell_nodup() helper is introduced
which is used to convert cell_info -> cell without name duplication as
a lighweight version of nvmem_cell_info_to_nvmem_cell().
With commit 4f3882177240 hid-input started clearing of "ignored" usages
to avoid using garbage that might have been left in them. However
"battery strength" usages should not be ignored, as we do want to
use them.
Let the controller logic decide when to enter into clock pause mode!
Entering in to pause mode during unregistration does not really make
sense as the controller is totally going down at that point in time.
logical address can be either assigned by the SLIMBus controller or the core.
Core uses IDA in cases where get_addr callback is not provided by the
controller.
Core already has this check while allocating IDR, however during absence
reporting this is not checked. This patch fixes this issue.
Fixes: 498c60153ebb ("quota: Implement quota format with 64-bit space and inode limits") Link: https://lore.kernel.org/r/20200924183619.4176790-1-edumazet@google.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jan Kara <jack@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
CFI validates that all indirect calls go to a function with the same
exact function pointer prototype. In this case, dwc2_set_bcm_params
is the target, which has a parameter of type 'struct dwc2_hsotg *',
but it is being implicitly cast to have a parameter of type 'void *'
because that is the set_params function pointer prototype. Make the
function pointer protoype match the definitions so that there is no
more violation.
Recently we applied a fix to cover the whole OSS sequencer ioctls with
the mutex for dealing with the possible races. This works fine in
general, but in theory, this may lead to unexpectedly long stall if an
ioctl like SNDCTL_SEQ_SYNC is issued and an event with the far future
timestamp was queued.
For fixing such a potential stall, this patch changes the mutex lock
applied conditionally excluding such an ioctl command. Also, change
the mutex_lock() with the interruptible version for user to allow
escaping from the big-hammer mutex.
Inside __scif_pin_pages(), when map_flags != SCIF_MAP_KERNEL it
will call pin_user_pages_fast() to map nr_pages. However,
pin_user_pages_fast() might fail with a return value -ERRNO.
The return value is stored in pinned_pages->nr_pages. which in
turn is passed to unpin_user_pages(), which expects
pinned_pages->nr_pages >=0, else disaster.
Fix this by assigning pinned_pages->nr_pages to 0 if
pin_user_pages_fast() returns -ERRNO.
Fixes: ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration") Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Link: https://lore.kernel.org/r/1600570295-29546-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "tsid" is a user controlled u8 which comes from debugfs. Values
more than 15 are invalid because "active_tsids" is a 16 bit variable.
If the value of "tsid" is more than 31 then that leads to a shift
wrapping bug.
Fixes: 8fffd9e5ec9e ("ath6kl: Implement support for QOS-enable and QOS-disable from userspace") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918142732.GA909725@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 13d515c796 (spi: omap2-mcspi: Switch to
readl_poll_timeout()).
The amount of time spent polling for the MCSPI_CHSTAT bits to be set on
AM335x-icev2 platform is less than 1us (about 0.6us) in most cases, with
or without using DMA. So, in most cases the function need not sleep.
Also, setting the sleep_usecs to zero would not be optimal here because
ktime_add_us() used in readl_poll_timeout() is slower compared to the
direct addition used after the revert. So, it is sub-optimal to use
readl_poll_timeout in this case.
When DMA is not enabled, this revert results in an increase of about 27%
in throughput and decrease of about 20% in CPU usage. However, the CPU
usage and throughput are almost the same when used with DMA.
Therefore, fix this by reverting the commit which switched to using
readl_poll_timeout().
Fixes: 13d515c796ad ("spi: omap2-mcspi: Switch to readl_poll_timeout()") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20200910122624.8769-1-a-govindraju@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Current code expects a single channel to be always used. Fix this
situation by forwarding the number of channels used. Then fix the
derivation of the bdiv clock rate.
The wilc_wfi_init_mon_int() forgets to clean up resource when
register_netdevice() failed. Add the missed call to fix it.
And the return value of netdev_priv can't be NULL, so remove
the unnecessary error handling.
Fixes: 588713006ea4 ("staging: wilc1000: avoid the use of 'wilc_wfi_mon' static variable") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Huang Guobin <huangguobin4@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200917123019.206382-1-huangguobin4@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The VLANs and PVIDs on the RTL8366 utilizes a "member
configuration" (MC) which is largely unexplained in the
code.
This set-up requires a special ordering: rtl8366_set_pvid()
must be called first, followed by rtl8366_set_vlan(),
else the MC will not be properly allocated. Relax this
by factoring out the code obtaining an MC and reuse
the helper in both rtl8366_set_pvid() and
rtl8366_set_vlan() so we remove this strict ordering
requirement.
In the process, add some better comments and debug prints
so people who read the code understand what is going on.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The rtl8366_set_vlan() and rtl8366_set_pvid() get invalid
VLANs tossed at it, especially VLAN0, something the hardware
and driver cannot handle. Check validity and bail out like
we do in the other callbacks.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / users / dwmw2 / linux.git / log