Dave Airlie [Thu, 4 Jul 2019 04:08:07 +0000 (14:08 +1000)]
Merge tag 'for-airlie-armada' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next
Armada DRM updates:
- Fix interlace support.
- use __drm_atomic_helper_plane_reset in overlay reset.
- since the overlay and video planes use essentially the same format
registers, precompute their values while validating.
- fix a long-standing deficiency with overlay planes and interlace modes
- calculate plane starting address at atomic_check stage rather than
when we're programming the registers.
- add gamma support.
- ensure mode adjustments made by other components are properly handled
in the driver and applied to the CRTC-programmed mode.
- add and use register definitions for the "REG4F" register.
- use drm_atomic_helper_shutdown() when tearing down to ensure that the
hardware is properly shutdown.
- add CRTC-level mode validation to ensure that we don't allow a mode
that the CRTC-level hardware can not support.
- improve the clocking selection for Armada 510 support.
- move CRTC debugfs files into the crtc-specific directory, using the
DRM helper to create these files.
- patch from Lubomir Rintel to replace a simple framebuffer.
- use the OF graph walker rather than open-coding this.
- eliminate a useless check for the availability of the remote's parent
which isn't required.
Dave Airlie [Thu, 4 Jul 2019 01:46:02 +0000 (11:46 +1000)]
Merge tag 'exynos-drm-next-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
- Drop the use of drmP.h header file
drmP.h header file has been deprecated so this patch drops the use of
this header, and instead includes appropriate header files required.
- Add COMPILE_TEST flag
This patch adds COMPILE_TEST dependency to exynos drm driver to
increase build test coverage. And also, it includes vmalloc.h
header file to fix one build warning which is introduced when
building the Linux kernel using sh.
Lubomir Rintel [Mon, 21 Jan 2019 06:01:57 +0000 (07:01 +0100)]
drm/armada: replace the simple-framebuffer
If there's a simple-framebuffer carried over from boot firmware, it's going
to stop working once we setup the LCDC for use via DRM. Kick it off from
the hardware.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Dave Airlie [Thu, 27 Jun 2019 23:34:25 +0000 (09:34 +1000)]
Merge tag 'drm-msm-next-2019-06-25' of https://gitlab.freedesktop.org/drm/msm into drm-next
+ usual progress on cleanups
+ dsi vs EPROBE_DEFER fixes
+ msm8998 (snapdragon 835 support)
+ a540 gpu support (mesa support already landed)
+ dsi, dsi-phy support
+ mdp5 and dpu interconnect (bus/memory scaling) support
+ initial prep work for per-context pagetables (at least the parts that
don't have external dependencies like iommu/arm-smmu)
There is one more patch for fixing DSI cmd mode panels (part of a set of
patches to get things working on nexus5), but it would be conflicty with 1cff7440a86e04a613665803b42034 in drm-next without rebasing or back-merge,
and since it doesn't conflict with anything in msm-next, I think it best
if Sean merges that through drm-mix-fixes instead.
(In other news, I've been making some progress w/ getting efifb working
properly on sdm850 laptop without horrible hacks, and drm/msm + clk stuff
not totally falling over when bootloader enables display and things are
already running when driver probes.. but not quite ready yet, hopefully
we can post some of that for 5.4.. should help for both the sdm835 and
sdm850 laptops.)
Sam Ravnborg [Thu, 27 Jun 2019 11:00:54 +0000 (20:00 +0900)]
drm/exynos: trigger build of all modules
Add COMPILE_TEST dependency to force exynos driver to
built for more than arm and to built modules
that otherwise required other symbols to be de-selected.
This will increase build coverage of the exynos driver
thus allowing most trivial build errors to be detected/fixed early.
This introduces one warning when built using sh:
exynos7_drm_decon.c: In function ‘decon_remove’:
exynos7_drm_decon.c:769:24: warning: unused variable ‘ctx’
struct decon_context *ctx = dev_get_drvdata(&pdev->dev);
This is due to the definition of iounmap() in sh,
and nothing that exynos driver can fix.
Include fix of exynos build for alpha.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jingoo Han <jingoohan1@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Dave Airlie [Thu, 27 Jun 2019 02:33:56 +0000 (12:33 +1000)]
Merge tag 'drm-next-5.3-2019-06-25' of git://people.freedesktop.org/~agd5f/linux into drm-next
drm-next-5.3-2019-06-25:
Merge drm-next
amdgpu:
- SR-IOV L1 policy fixes
- Removed no longer needed vram_page_split module parameter
- Add module parameter to override default ABM level
- Gamma fixes
- No need to check return values for debugfs
- Improve HMM error handling
- Avoid possible OOM situations when lots of thread are submitting with
memory contention
- Improve hw i2c access abritration
- DSC (Display Stream Compression) support in DC
- Initial navi10 support
* DC support
* GFX/Compute support
* SDMA support
* Power Management support
* VCN support
- Static checker fixes
- Misc cleanups
- fix long udelay on arm
amdkfd:
- Implement priority controls for gfx9
- Enable VEGAM
- Rework mqd allocation and init
- Circular locking fix
- Fix SDMA queue allocation race condition
- No need to check return values for debugfs
- Add proc style process information
- Initial navi10 support
radeon:
- No need to check return values for debugfs
UAPI changes:
- GDDR6 added to vram type query
- New Navi10 details added gpu info query
- Navi family added to asic family query
Dave Airlie [Thu, 27 Jun 2019 01:48:02 +0000 (11:48 +1000)]
Merge tag 'for-airlie-tda998x' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next
TDA998x updates:
- improve the driver's approach to audio, adding support for more I2S
based formats, particularly other justifications, and preparing the
driver to support other bclk ratios.
- add support for pixel repeated modes, tested with a Panasonic TV.
- correct the quantisation range handling; in particular, do not send
full range RGB to the sink when the sink does not support full range
RGB.
Kevin Wang [Mon, 17 Jun 2019 05:05:00 +0000 (13:05 +0800)]
drm/amd/powerplay: add feature check in unforce_dpm_levels function (v2)
if not check dpm feature is enabled, it will cause show smc send message
failed log in dmesg log.
eg:
echo "auto" > power_dpm_force_performance_level
v2: whitespace fix (Alex)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Rui Teng <rui.teng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 14 Jun 2019 09:04:36 +0000 (17:04 +0800)]
drm/amd/powerplay: check gfxclk dpm enablement before proceeding
Support gfxclk dpm disablement.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 11 Jun 2019 07:21:06 +0000 (15:21 +0800)]
drm/amd/powerplay: print smu versions only if version mismatch
only printf smu version when if version not matched.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 6 Jun 2019 09:12:34 +0000 (17:12 +0800)]
drm/amd/powerplay: fix fan speed show error (for hwmon pwm)
the navi asic can't get current rpm by MSG_GetCurrentRpm,
it will cause show fan rpm error, use Metrics_t to replace it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Mon, 24 Jun 2019 17:14:14 +0000 (13:14 -0400)]
drm/amd/display: update infoframe after dig fe is turned on (v2)
[Why]
The AVI infoframe is incorrectly programmed on DCN1/2 when enabling a
stream - causing the wrong pixel encoding to be used for display.
This is because the AVI infoframe is programmed before the DIG BE is
connected to the FE and turned on, so enabling the AFMT block doesn't
actually work and the registers subsequently can't be written to.
[How]
Program the infoframe *after* turning on the DIG FE. This was the
behavior previously used but it was incorrectly reverted
when adding the DCN2 HW sequencer code.
v2: Don't call update_info_frame twice
Fixes: 7ed4e6352c16fe01 ("drm/amd/display: Add DCN2 HW Sequencer and Resource") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Mon, 24 Jun 2019 09:25:26 +0000 (17:25 +0800)]
drm/amd/powerplay:clean up the residual mutex for smu_hw_init
The mutex for procting SMU during hw_init was removed as system
will be deadlock when smu_populate_umd_state_clk try get SMU mutex.
Therefore need remove the residual mutex from failed path.
Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ernst Sjöstrand [Mon, 24 Jun 2019 15:15:42 +0000 (17:15 +0200)]
drm/amd/amdgpu: Check stream in amdgpu_dm_commit_planes
Reported by smatch:
amdgpu_dm.c:5637 amdgpu_dm_commit_planes() error: we previously assumed 'acrtc_state->stream' could be null
This seems to be checked for null pretty consistently elsewhere.
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 25 Jun 2019 13:54:21 +0000 (08:54 -0500)]
drm/amdgpu/display: switch udelay to msleep
We may need to sleep for up to 80ms
(8ms per each of up to 10 loop iterations):
/* First DPCD read after VDD ON can fail if the particular board
* does not have HPD pin wired correctly. So if DPCD read fails,
* which it should never happen, retry a few times. Target worst
* case scenario of 80 ms.
*/
Switch udelay to msleep to avoid limits on arm.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Brian Masney [Fri, 31 May 2019 09:46:14 +0000 (05:46 -0400)]
drm/msm: add dirty framebuffer helper
Use drm_atomic_helper_dirtyfb() as the dirty callback in the
msm_framebuffer_funcs struct. Call drm_plane_enable_fb_damage_clips()
when the planes are initialized in mdp4, mdp5, and dpu1.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
Andres Rodriguez [Wed, 19 Jun 2019 18:09:01 +0000 (14:09 -0400)]
drm/edid: parse CEA blocks embedded in DisplayID
DisplayID blocks allow embedding of CEA blocks. The payloads are
identical to traditional top level CEA extension blocks, but the header
is slightly different.
This change allows the CEA parser to find a CEA block inside a DisplayID
block. Additionally, it adds support for parsing the embedded CTA
header. No further changes are necessary due to payload parity.
This change fixes audio support for the Valve Index HMD.
Dave Airlie [Tue, 25 Jun 2019 02:49:08 +0000 (12:49 +1000)]
Merge commit 'refs/for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next
Picking up pace on the upstreaming of Komeda driver, with quite a lot
of new features added this time. On top of that we have the small
cleanups and improved usage of the debugfs functions. Please pull!
Rob Clark [Mon, 24 Jun 2019 16:09:47 +0000 (09:09 -0700)]
drm/msm/a3xx: remove TPL1 regs from snapshot
These regs are write-only, and the hw throws a hissy-fit (ie. reboots)
when we try to read them for GPU state snapshot, in response to a GPU
hang. It is rather impolite when GPU recovery triggers an insta-
reboot, so lets remove the TPL1 registers from the snapshot.
Fixes: 7198e6b03155 drm/msm: add a3xx gpu support Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Hawking Zhang [Mon, 24 Jun 2019 11:26:00 +0000 (19:26 +0800)]
drm/amdgpu: fix modprobe failure for uvd_4/5/6
For uvd_4/5/6, amdgpu driver will only power on them when
there are jobs assigned to decode/enc rings.uvd_4/5/6 dpm was broken
since amdgpu_dpm_set_powergating_by_smu only covers gfx block.
The change would add more IP block support in amdgpu_dpm_set_powergating_by_smu
For GFX/UVD/VCN/VCE, if the new SMU driver is supported, invoke new
power gate helper function smu_dpm_set_power_gate, otherwise, fallback to
legacy powerplay helper function pp_set_powergating_by_smu. For other IP blocks
always invoke legacy powerplay helper function.
Jonathan Kim [Fri, 21 Jun 2019 02:23:35 +0000 (22:23 -0400)]
drm/amdgpu: add sw_init to df_v1_7
change df_init to df_sw_init df 1.7 to prevent regression issues on pre-vega20
products when callback is called in sw_common_sw_init.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Fri, 14 Jun 2019 15:55:50 +0000 (10:55 -0500)]
drm/amdkfd: Set gws_mask to 64 bit 1s
Previous kfd doesn't use gws so this mask was set to 0.
Set it to 64 bit 1s because now kfd can use all 64 gws
resources.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hersen wu [Thu, 23 May 2019 22:49:39 +0000 (18:49 -0400)]
drm/amd/display/dc: set num-dwb = 1 as navi10 asic cap
during navi10 bring up, dwb causes system hang.
to continue debug major issue, disable dwb by
set num-dwb = 0. the hang issue is not reproduced now
by enable num-dwb =1. dc source is shared by all os.
win needs num-dwb = 1.
Signed-off-by: hersen wu <hersenxs.wu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Su Sung Chung [Thu, 30 May 2019 18:59:03 +0000 (14:59 -0400)]
drm/amd/display: make clk_mgr call enable_pme_wa
[why]
Before for raven and navi we are calling pp_smu functions for pme
[how]
refactor a code so we will call clk_mgr's enable_pme_wa function so we
can use pme_wa for future asics. This way we don't need to worry about
different ASIC since clk_mgr already have that information
Signed-off-by: Su Sung Chung <Su.Chung@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Lim [Mon, 29 Apr 2019 20:05:42 +0000 (16:05 -0400)]
drm/amd/display: Add Underflow Asserts to dc
[Why]
For debugging underflow issues it can be useful to have asserts when the
underflow initially occurs.
[How]
Read the underflow status registers after actions that have a high risk
of causing underflow and assert that no underflow occurred. If underflow
occurred, clear the bit.
Signed-off-by: Thomas Lim <Thomas.Lim@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Wed, 22 May 2019 22:25:33 +0000 (18:25 -0400)]
drm/amd/display: add p010 and ayuv plane caps
for future use
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Mon, 27 May 2019 18:15:27 +0000 (14:15 -0400)]
drm/amd/display: update DCN2 uclk switch time
[why]
value commited to by HW team is going to be higher
than pre-silicon, and will cause underflow if driver not
updated
[how]
update hardcoded value, update pstate switching logic
to fix case where with long uclk time we won't allow switch
even when we should
Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Thu, 9 May 2019 16:14:58 +0000 (12:14 -0400)]
drm/amd/display: Rework CRTC color management
[Why]
To prepare for the upcoming DRM plane color management properties
we need to correct a lot of wrong behavior and assumptions made for
CRTC color management.
The documentation added by this commit in amdgpu_dm_color explains
how the HW color pipeline works and its limitations with the DRM
interface.
The current implementation does the following wrong:
- Implicit sRGB DGM when no CRTC DGM is set
- Implicit sRGB RGM when no CRTC RGM is set
- No way to specify a non-linear DGM matrix that produces correct output
- No way to specify a correct RGM when a linear DGM is used
We had workarounds for passing kms_color tests but not all of the
behavior we had wrong was covered by these tests (especially when
it comes to non-linear DGM). Testing both DGM and RGM at the same time
isn't something kms_color tests well either.
[How]
The specifics for how color management works in AMDGPU and the new
behavior can be found by reading the documentation added to
amdgpu_dm_color.c from this patch.
All of the incorrect cases from the old implementation have been
addressed for the atomic interface, but there still a few TODOs for
the legacy one.
Note: this does cause regressions for kms_color@pipe-a-ctm-* over HDMI.
The result looks correct from visual inspection but the CRC no longer
matches. For reference, the test was previously doing the following:
linear degamma -> CTM -> sRGB regamma -> RGB to YUV (709) -> ...
Now the test is doing:
linear degamma -> CTM -> linear regamma -> RGB to YUV (709) -> ...
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Wed, 22 May 2019 17:20:34 +0000 (13:20 -0400)]
drm/amd/display: making DCN20 WM table non-overlapping
[why]
Existing behavior has overlapping ranges resulting in path
dependent SMU selection
[how]
Make ranges non-overlapping, resulting in non-path dependent
selection
Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Wed, 22 May 2019 15:50:20 +0000 (11:50 -0400)]
drm/amd/display: update dsc max_target_bpp to 16 bpp
[why]
According to the latest specs, the max_target bpp sink
can support is 16 bpp.
[how]
update dsc max_target_bpp to 16
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Current policy assumes virtual DPCD peer device as
an individual MST branch device with 1 input and 1 output.
However this is only true for virtual DP-to-DP peer device.
In general there are three types of virtual DP peer devices.
1. Sink peer device with virtual DPCD.
2. Virtual DP-to-DP Peer device with virtual DPCD.
3. Virtual DP-to-HDMI Protocol Converter Peer Device with
Virtual DPCD.
So we should break the assumption and handle all three types.
[how]
DP-to-DP peer device will have virtual DPCD cap upstream.
Sink peer device will have virtual DPCD on the logical port.
Dp to HDMI protocol converter peer device will have virtual DPCD
on its converter port.
For DSC capable Synaptics non VGA port we workaround by enumerating
a virutal DPCD peer device on its upstream
even if it doesn't have one.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Fri, 17 May 2019 15:08:02 +0000 (11:08 -0400)]
drm/amd/display: add support for forcing DCFCLK without affecting watermarks
[why]
useful for debugging
[how]
plumb a debug option in dc
Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 14 May 2019 13:19:01 +0000 (09:19 -0400)]
drm/amd/display: Copy stream updates onto streams
[Why]
Almost every function in DC that works with stream state expects that
the current state on the stream is the one that it should be writing
out. These functions are typically triggered by specifying a particular
stream update - but the actual contents of the stream update itself
are ignored, leaving it to the DM to actually update the stream state
itself.
The problem with doing this in DM is a matter of timing. On Linux
most of this is incorrectly done in atomic check, when we actually want
it to be done during atomic commit tail while access to DC is locked.
To give an example, a commit requesting to modify color management
state for DM could come in, be rejected, but still have modified
the actual system state for the stream since it's shared memory. The
next time color management gets programmed it'll use the rejected
color management info - which might not even still be around if it's
a custom transfer function.
So a reasonable place to perform this is within DC itself and this is
the model that's currently in use for surface updates. DC can even
compare the current system state to the incoming surface update to
determine update level, something that can't currnetly be done with the
framework for stream updates.
[How]
Duplicate the framework used for surface updates for stream updates
as well. Copy all the updates after checking the update type.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ilya Bakoulin [Thu, 16 May 2019 18:33:14 +0000 (14:33 -0400)]
drm/amd/display: Fix incorrect vba type
SwathWidthCThisState is expected to be an unsigned int array.
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Wed, 15 May 2019 19:50:51 +0000 (15:50 -0400)]
drm/amd/display: removing MODULO change for dcn2
[why]
when resetting pipes from 480p to dual-pipe 8k, modulo reg write for
video optimized rate updated one pipe without changing the other, causing
sync error
[how]
removed code from dcn2
Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ilya Bakoulin [Fri, 3 May 2019 21:22:32 +0000 (17:22 -0400)]
drm/amd/display: Fix incorrect DML output_bpp value
[Why]
The output_bpp pipe parameter was assigned an incorrect value
(color depth enum), and subsequently used to overwrite
the OutputBpp parameter calculated by DML. Seems like this had no
effect except with DSC enabled, which would make DML produce
bad outputs.
[How]
Removed assignment to OutputBpp, fixed output_bpp assignment,
and properly set ForcedOutputLinkBPP instead of OutputBpp.
Also removed condition in DML that prevented forcing of
Output BPP with DSC enabled.
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Mon, 13 May 2019 19:09:13 +0000 (15:09 -0400)]
drm/amd/display: Add missing VM conversion from hw values
[why]
VM implemenation is missing conversion from HW values in hubbub
DM not passing actual PTB during flip
[how]
add proper HW conversion from logical values
fix cases where we programmed VA even though we are in PA
plumb in PTB from DM
Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nikola Cornij [Wed, 8 May 2019 18:36:03 +0000 (14:36 -0400)]
drm/amd/display: Enable DSC power-gating for DSC streams
[why]
Currently DSC power gating is disabled by default because the power
transition doesn't happen, causing a crash on some systems
[how]
Fix the lack of power state transition and enable DSC power gating
by default.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Wed, 8 May 2019 17:29:09 +0000 (13:29 -0400)]
drm/amd/display: Return UPDATE_TYPE_FULL on writeback update
Should do full update when display writeback is updated.
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Duke Du <Duke.Du@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Mon, 6 May 2019 18:22:39 +0000 (14:22 -0400)]
drm/amd/display: decouple dsc adjustment out of enablement
[why]
dsc adjustment is allowed via stream update sequence.
dsc enablement is only allowed via commit stream sequence.
with the current unified dsc set function, it is hard
to determine which sequence it is called by.
The solution is to decouple dsc adjustment out of enablement
sequence so we can handle them separately.
[how]
decouple dsc adjustment out of enablement.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Fri, 3 May 2019 19:59:54 +0000 (15:59 -0400)]
drm/amd/display: always use 4 dp lanes for dml
[why]
current DML logic uses currently trained setting for number
of dp lanes in DML calculations. this is obviously flawed since
just because 1 lane is in use doesn't mean only 1 lane can be used
this causes mode validation to fail depending on current state,
which is incorrect
[how]
DML should always assume 4 lanes are available. validation of
bandwidth is not supposed to be handled by DML, since we do
link validation without DML already
also, DML is expecting there to be a copy of the max state, this
state is removed when update_bounding_box is called to update
actual SKU clocks. fix this as well by duping last state.
Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Eric Yang <eric.yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Set test pattern on blank when using Visual Confirm
[Why]
We want a test pattern to show up on screen when we're blanked and have
visual confirm enabled, for debugging. Raven does this, it's a mistake that
Navi does not.
[How]
- in "blank_pixel_data", set appropriate DPG pattern for visual confirm
- refactor DPG calls out of "enable_stream_timing"
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Thu, 25 Apr 2019 20:24:13 +0000 (16:24 -0400)]
drm/amd/display: add dsc_passthrough_support bit in dpcd struct
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To send sdp message immediately from a single slot.
[How]
Modify the generic SDP message interface, and use GSP4 to send immediate
sdp message.
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Remove OPP clock programming on plane disable
[Why]
Plane disable gets calls when we enable blank. On DCN2, we blank by using
DPG to display a black colour instead of using OTG blank. DPG runs off the
OPP clock, therefore we shouldn't disable the OPP clock when disabling the
plane. We do need to disable the OPP clock when disabling the entire pipe,
that will be addressed in a separate commit.
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Wed, 17 Apr 2019 23:15:15 +0000 (19:15 -0400)]
drm/amd/display: [backport] dwb dm + efc support
dwb fixes.
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Duke Du <Duke.Du@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Tue, 30 Apr 2019 17:01:12 +0000 (13:01 -0400)]
drm/amd/display: Create DWB resource for DCN2
[Description]
dcn20 has num_dwb =1 in the res cap, but not created.
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Duke Du <Duke.Du@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nikola Cornij [Wed, 17 Apr 2019 23:07:08 +0000 (19:07 -0400)]
drm/amd/display: Add support for extended DSC DPCD caps
[why]
A few of the new DSC DPCD caps were introduced by a DP 1.4a SCR in order
to give DSC branch decoders a chance to expose their maximum throughput
and maximum line width limitations.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Fri, 12 Apr 2019 22:23:11 +0000 (18:23 -0400)]
drm/amd/display: block passive dongle EDID Emulation for USB-C ports
[Why]
Emulating passive dongle on USB-C port causes issue on some asics.
[How]
Check for DP_IS_USB_C flag in bios parser and propagate it to
encoder features flags. If DP_IS_USB_C flag is set and it is trying to
emulate passive dongle, then return fail.
Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Fri, 12 Apr 2019 19:50:55 +0000 (15:50 -0400)]
drm/amd/display: DCHUB requestors numbers for Navi.
[Why]
The DCHub arbiter has a mechanism to dynamically rate limit the DCHub
request stream to the fabric. If the memory controller is fully utilized
and the DCHub requestors are well ahead of their amortized schedule,
then it is safe to prevent the next winner from being committed and sent
to the fabric. The utilization of the memory controller is approximated
by ensuring that the number of outstanding requests is greater than a
threshold specified by the ARB_MIN_REQ_OUTSTANDING. To determine that
the DCHub requestors are well ahead of the amortized schedule, the slack
of the next winner is compared with the ARB_SAT_LEVEL in DLG RefClk
cycles.
[How]
The recommended settings to enable thise dynamic limiting for Navi is
180 requests.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In order to ensure that incoming flips are latched and
complete immediately, we need to program the vupdate
interrupt to come during the back porch of each frame.
[How]
Program the vupdate start_line to be in the back porch
like it's done for DCN1.
The split condition is broken and will always activate
at the moment.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Tue, 7 May 2019 20:12:02 +0000 (15:12 -0500)]
drm/amd/display: Add hubp_init entry to hubp vtable
Different HW will need to init HUBP differently. For now, add a vtable
entry, and hook a NO-OP for DCN1 and DCN2.
In addition, future HW will need to access the HUBPREQ_DEBUG and
CUR_TTU_CNTL0 register for hubp_init. Add that here.
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
OPTC data format was left at its default value (444) when enabling
ODM combine. This caused issues with FPGA capture.
[How]
Write the OPTC_DATA_FORMAT field when enabling ODM combine.
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / users / hch / uuid.git / log