Charles Keepax [Tue, 18 Mar 2025 17:14:51 +0000 (17:14 +0000)]
ASoC: ops: Add control to register value helper
Add a helper function to convert from control values to register values
that can replace a lot of the duplicated code in the various put
handlers.
This also fixes a small issue in snd_soc_put_volsw where the value is
converted to a control value before doing the invert, but the invert
is done against the register max which will result in incorrect values
for inverted controls with a non-zero minimum.
Charles Keepax [Tue, 18 Mar 2025 17:14:50 +0000 (17:14 +0000)]
ASoC: ops: Replace snd_soc_read_signed() with new helper
The current snd_soc_read_signed() helper is only used from
snd_soc_get_volsw() and can be implemented more simply with
sign_extend. Remove snd_soc_read_signed() and add a new
soc_mixer_reg_to_ctl() helper. This new helper does not
include the reading of the register, but does include min and
max handling. This allows the helper to replace more of the
duplicated code and makes it easier to process the differences
between single, double register and double shift style controls.
It is worth noting this adds support for sign_bit into the _range
and sx callbacks and the invert option to sx callbacks.
Charles Keepax [Tue, 18 Mar 2025 17:14:48 +0000 (17:14 +0000)]
ASoC: ops: Update mask generation to use GENMASK
Use GENMASK to make the masks for the various control helper functions.
Also factor out a shared helper function for the volsw and volsw_range
controls since the same code is appropriate for each. Note this does add
support for sign_bit into the volsw_range callbacks.
Charles Keepax [Tue, 18 Mar 2025 17:14:45 +0000 (17:14 +0000)]
ASoC: ops-test: Add some basic kunit tests for soc-ops
Add some basic kunit tests for some of the ASoC control put and get
helpers. This will assist in doing some refactoring. Note that presently
some tests fail, but the rest of the series will fix these up.
Mark Brown [Tue, 18 Mar 2025 15:34:29 +0000 (15:34 +0000)]
ASoC: Intel: avs: Replace devm_kzalloc() with
Merge series from Ethan Carter Edwards <ethan@ethancedwards.com>:
Open coded arithmetic in allocator arguments is discouraged. Helper
functions like kcalloc or, in this case, devm_kcalloc are preferred. Not
only for readability purposes but safety purposes.
The changes move `devm_kzalloc(dev, sizeof(var) * n, GFP_KERNEL)` to
the helper function `devm_kcalloc(dev, n, sizeof(var), GFP_KERNEL)`.
Here is a series of four patches within the Intel/avs drivers that make
these changes. They are all compile tested only but should have no
effect on runtime behaviour.
Mark Brown [Mon, 17 Mar 2025 20:18:02 +0000 (20:18 +0000)]
Some minor SDCA preparation
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Make some small fixups and add some minor missing features that will be
needed for the next major part of the SDCA work. This series doesn't do
a lot on its own, but as the next series will add all the ALSA control
and DAPM graph creation it's probably best to get these minor things out
of the way to simplify review on the bigger stuff.
Mark Brown [Mon, 17 Mar 2025 19:43:01 +0000 (19:43 +0000)]
ASoC: Convert PCM codecs to GPIO descriptors
Merge series from Linus Walleij <linus.walleij@linaro.org>:
Three remaining TI PCM codecs use the old GPIO API in
different ways, fix them all up and move over to
<linux/gpio/consumer.h> and get rid of <linux/gpio.h>.
Mark Brown [Mon, 17 Mar 2025 18:10:49 +0000 (18:10 +0000)]
Allow retrieving accessory detection reference on
Merge series from "Nícolas F. R. A. Prado" <nfraprado@collabora.com>:
This series enables the MT8188-MT6359 sound driver to retrieve the
MT6359 ACCDET sound component from a mediatek,accdet DT property, which
allows detecting jack insertion/removal.
Patch 1 describes the new property in the binding. Patch 2 implements
the sound component retrieval in the common MTK soundcard driver. Patch
4 updates the MT8188-MT6359 sound driver to register the audio jack and
initialize the ACCDET driver for detection, if the property is present.
Patch 3 adds a stub to prevent a linker failure in case the
MT6359-ACCDET config is disabled.
Sudeep Holla [Mon, 17 Mar 2025 10:13:18 +0000 (10:13 +0000)]
ASoC: soc-utils: Transition to the faux device interface
The ASoC soc-utils driver does not require the creation of a platform
device. Originally, this approach was chosen for simplicity when the
driver was first implemented.
With the introduction of the lightweight faux device interface, we now
have a more appropriate alternative. Migrate the driver to utilize the
faux bus, given that the platform device it previously created was not
a real one anyway. This will simplify the code, reducing its footprint
while maintaining functionality.
Laurentiu Mihalcea [Tue, 11 Mar 2025 16:32:54 +0000 (12:32 -0400)]
ASoC: dt-bindings: audio-graph-card2: add widgets and hp-det-gpios support
Introduce the 'widgets' property, allowing the creation of widgets from
4 template widgets: Microphone, Line, Headphone, and Speaker. Also
introduce the 'hp-det-gpios' property, which allows using headphone
detection using the specified GPIO.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://patch.msgid.link/20250311163255.2664-3-laurentiumihalcea111@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Laurentiu Mihalcea [Tue, 11 Mar 2025 16:32:53 +0000 (12:32 -0400)]
ASoC: dt-bindings: support imx95's CM7 core
Add binding for imx95's CM7 core, used for audio processing.
Additionally, introduce a common binding for NXP audio processors with
Sound Open Firmware (SOF) support.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Link: https://patch.msgid.link/20250311163255.2664-2-laurentiumihalcea111@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Fix acp_common_hw_ops declaration error by adding static and
remove export symbol.
sparse: symbol 'acp_common_hw_ops' was not declared. Should it be static?
Fixes: 8ae746fe5104 ("ASoC: amd: acp: Implement acp_common_hw_ops support for acp platforms") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202503141442.iT0LHEMx-lkp@intel.com/ Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://patch.msgid.link/20250317072413.88971-3-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:49 +0000 (10:55 +0100)]
ASoC: amd: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Takashi Iwai [Mon, 17 Mar 2025 09:55:48 +0000 (10:55 +0100)]
ASoC: xtensa: Convert to RUNTIME_PM_OPS()
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr().
This optimizes slightly when CONFIG_PM is disabled, too.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-87-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:47 +0000 (10:55 +0100)]
ASoC: tegra30: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: linux-tegra@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-86-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:46 +0000 (10:55 +0100)]
ASoC: tegra20: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: linux-tegra@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-85-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:45 +0000 (10:55 +0100)]
ASoC: tegra210: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: linux-tegra@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-84-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:44 +0000 (10:55 +0100)]
ASoC: tegra186: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: linux-tegra@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-83-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:42 +0000 (10:55 +0100)]
ASoC: stm: Convert to SYSTEM_SLEEP_PM_OPS()
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us
dropping superfluous CONFIG_PM_SLEEP ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Olivier Moysan <olivier.moysan@foss.st.com> Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-81-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:38 +0000 (10:55 +0100)]
ASoC: samsung: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us to drop superfluous CONFIG_PM ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-77-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:37 +0000 (10:55 +0100)]
ASoC: rockchip: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us to drop ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Takashi Iwai [Mon, 17 Mar 2025 09:55:36 +0000 (10:55 +0100)]
ASoC: rcar: Convert to SYSTEM_SLEEP_PM_OPS()
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us to
drop ugly __maybe_unused attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-75-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:35 +0000 (10:55 +0100)]
ASoC: qcom: Convert to SYSTEM_SLEEP_PM_OPS()
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us to
drop ugly __maybe_unused attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-74-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:34 +0000 (10:55 +0100)]
ASoC: mediatek: mt8365: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us to drop ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Takashi Iwai [Mon, 17 Mar 2025 09:55:24 +0000 (10:55 +0100)]
ASoC: intel: catpt: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-63-tiwai@suse.de Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:22 +0000 (10:55 +0100)]
ASoC: img: Convert to RUNTIME_PM_OPS() and co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping superfluous CONFIG_PM_SLEEP
ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Takashi Iwai [Mon, 17 Mar 2025 09:55:16 +0000 (10:55 +0100)]
ASoC: wm8994: Convert to SYSTEM_SLEEP_PM_OPS()
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us
superfluous CONFIG_PM_SLEEP ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: patches@opensource.cirrus.com Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250317095603.20073-55-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:15 +0000 (10:55 +0100)]
ASoC: wm8962: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping superfluous CONFIG_PM ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: patches@opensource.cirrus.com Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250317095603.20073-54-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:12 +0000 (10:55 +0100)]
ASoC: wm2200: Convert to RUNTIME_PM_OPS()
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes and superfluous CONFIG_PM ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: patches@opensource.cirrus.com Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250317095603.20073-51-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:08 +0000 (10:55 +0100)]
ASoC: ts3a227e: Convert to SYSTEM_SLEEP_PM_OPS()
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us
dropping superfluous CONFIG_PM_SLEEP ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Takashi Iwai [Mon, 17 Mar 2025 09:55:06 +0000 (10:55 +0100)]
ASoC: rtq9128: Convert to RUNTIME_PM_OPS()
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS(),
which allows us dropping ugly __maybe_unsed attributes.
Merely a cleanup, there should be no actual code change.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-45-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:05 +0000 (10:55 +0100)]
ASoC: rt9120: Convert to RUNTIME_PM_OPS()
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-44-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:04 +0000 (10:55 +0100)]
ASoC: rt722: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-43-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:03 +0000 (10:55 +0100)]
ASoC: rt721: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-42-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:02 +0000 (10:55 +0100)]
ASoC: rt715: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-41-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:01 +0000 (10:55 +0100)]
ASoC: rt712: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-40-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:55:00 +0000 (10:55 +0100)]
ASoC: rt711: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-39-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:54:59 +0000 (10:54 +0100)]
ASoC: rt700-sdw: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-38-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:54:58 +0000 (10:54 +0100)]
ASoC: rt5682-sdw: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-37-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:54:57 +0000 (10:54 +0100)]
ASoC: rt5645: Convert to SYSTEM_SLEEP_PM_OPS()
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us
dropping ugly __maybe_unused attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-36-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:54:56 +0000 (10:54 +0100)]
ASoC: rt5514: Convert to SYSTEM_SLEEP_PM_OPS()
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us
dropping ugly __maybe_unused attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-35-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:54:55 +0000 (10:54 +0100)]
ASoC: rt1320-sdw: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-34-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:54:54 +0000 (10:54 +0100)]
ASoC: rt1318-sdw: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-33-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:54:53 +0000 (10:54 +0100)]
ASoC: rt1316-sdw: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-32-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:54:52 +0000 (10:54 +0100)]
ASoC: rt1308-sdw: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-31-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:54:51 +0000 (10:54 +0100)]
ASoC: rt1017-sdca-sdw: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-30-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:54:48 +0000 (10:54 +0100)]
ASoC: max98927: Convert to SYSTEM_SLEEP_PM_OPS()
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us
dropping superfluous CONFIG_PM_SLEEP ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Takashi Iwai [Mon, 17 Mar 2025 09:54:46 +0000 (10:54 +0100)]
ASoC: max98520: Convert to SYSTEM_SLEEP_PM_OPS()
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us
dropping ugly __maybe_unsed attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Takashi Iwai [Mon, 17 Mar 2025 09:54:45 +0000 (10:54 +0100)]
ASoC: max98396: Convert to SYSTEM_SLEEP_PM_OPS()
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us
dropping superfluous CONFIG_PM_SLEEP ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Takashi Iwai [Mon, 17 Mar 2025 09:54:44 +0000 (10:54 +0100)]
ASoC: max98390: Convert to SYSTEM_SLEEP_PM_OPS()
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us
dropping superfluous CONFIG_PM_SLEEP ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Takashi Iwai [Mon, 17 Mar 2025 09:54:43 +0000 (10:54 +0100)]
ASoC: max98373: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping superfluous CONFIG_PM and
CONFIG_PM_SLEEP ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Takashi Iwai [Mon, 17 Mar 2025 09:54:42 +0000 (10:54 +0100)]
ASoC: max98090: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping superfluous CONFIG_PM and
CONFIG_PM_SLEEP ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Takashi Iwai [Mon, 17 Mar 2025 09:54:40 +0000 (10:54 +0100)]
ASoC: hdac_hdmi: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping superfluous CONFIG_PM ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Takashi Iwai [Mon, 17 Mar 2025 09:54:39 +0000 (10:54 +0100)]
ASoC: da7213: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: support.opensource@diasemi.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-18-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 17 Mar 2025 09:54:38 +0000 (10:54 +0100)]
ASoC: cx2072x: Convert to RUNTIME_PM_OPS() & co
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
projects / users / jedix / linux-maple.git / log