Darrick J. Wong [Mon, 2 Dec 2024 18:57:36 +0000 (10:57 -0800)]
xfs: separate dquot buffer reads from xfs_dqflush
The first step towards holding the dquot buffer in the li_buf instead of
reading it in the AIL is to separate the part that reads the buffer from
the actual flush code. There should be no functional changes.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:36 +0000 (10:57 -0800)]
xfs: don't lose solo dquot update transactions
Quota counter updates are tracked via incore objects which hang off the
xfs_trans object. These changes are then turned into dirty log items in
xfs_trans_apply_dquot_deltas just prior to commiting the log items to
the CIL.
However, updating the incore deltas do not cause XFS_TRANS_DIRTY to be
set on the transaction. In other words, a pure quota counter update
will be silently discarded if there are no other dirty log items
attached to the transaction.
This is currently not the case anywhere in the filesystem because quota
updates always dirty at least one other metadata item, but a subsequent
bug fix will add dquot log item precommits, so we actually need a dirty
dquot log item prior to xfs_trans_run_precommits. Also let's not leave
a logic bomb.
Cc: <stable@vger.kernel.org> # v2.6.35 Fixes: 0924378a689ccb ("xfs: split out iclog writing from xfs_trans_commit()") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:35 +0000 (10:57 -0800)]
xfs: don't lose solo superblock counter update transactions
Superblock counter updates are tracked via per-transaction counters in
the xfs_trans object. These changes are then turned into dirty log
items in xfs_trans_apply_sb_deltas just prior to commiting the log items
to the CIL.
However, updating the per-transaction counter deltas do not cause
XFS_TRANS_DIRTY to be set on the transaction. In other words, a pure sb
counter update will be silently discarded if there are no other dirty
log items attached to the transaction.
This is currently not the case anywhere in the filesystem because sb
counter updates always dirty at least one other metadata item, but let's
not leave a logic bomb.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:34 +0000 (10:57 -0800)]
xfs: avoid nested calls to __xfs_trans_commit
Currently, __xfs_trans_commit calls xfs_defer_finish_noroll, which calls
__xfs_trans_commit again on the same transaction. In other words,
there's a nested function call (albeit with slightly different
arguments) that has caused minor amounts of confusion in the past.
There's no reason to keep this around, since there's only one place
where we actually want the xfs_defer_finish_noroll, and that is in the
top level xfs_trans_commit call.
This also reduces stack usage a little bit.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:33 +0000 (10:57 -0800)]
xfs: only run precommits once per transaction object
Committing a transaction tx0 with a defer ops chain of (A, B, C)
creates a chain of transactions that looks like this:
tx0 -> txA -> txB -> txC
Prior to commit cb042117488dbf, __xfs_trans_commit would run precommits
on tx0, then call xfs_defer_finish_noroll to convert A-C to tx[A-C].
Unfortunately, after the finish_noroll loop we forgot to run precommits
on txC. That was fixed by adding the second precommit call.
Unfortunately, none of us remembered that xfs_defer_finish_noroll
calls __xfs_trans_commit a second time to commit tx0 before finishing
work A in txA and committing that. In other words, we run precommits
twice on tx0:
This currently isn't an issue because the inode item precommit is
idempotent; the iunlink item precommit deletes itself so it can't be
called again; and the buffer/dquot item precommits only check the incore
objects for corruption. However, it doesn't make sense to run
precommits twice.
Fix this situation by only running precommits after finish_noroll.
Cc: <stable@vger.kernel.org> # v6.4 Fixes: cb042117488dbf ("xfs: defered work could create precommits") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:33 +0000 (10:57 -0800)]
xfs: unlock inodes when erroring out of xfs_trans_alloc_dir
Debugging a filesystem patch with generic/475 caused the system to hang
after observing the following sequences in dmesg:
XFS (dm-0): metadata I/O error in "xfs_imap_to_bp+0x61/0xe0 [xfs]" at daddr 0x491520 len 32 error 5
XFS (dm-0): metadata I/O error in "xfs_btree_read_buf_block+0xba/0x160 [xfs]" at daddr 0x3445608 len 8 error 5
XFS (dm-0): metadata I/O error in "xfs_imap_to_bp+0x61/0xe0 [xfs]" at daddr 0x138e1c0 len 32 error 5
XFS (dm-0): log I/O error -5
XFS (dm-0): Metadata I/O Error (0x1) detected at xfs_trans_read_buf_map+0x1ea/0x4b0 [xfs] (fs/xfs/xfs_trans_buf.c:311). Shutting down filesystem.
XFS (dm-0): Please unmount the filesystem and rectify the problem(s)
XFS (dm-0): Internal error dqp->q_ino.reserved < dqp->q_ino.count at line 869 of file fs/xfs/xfs_trans_dquot.c. Caller xfs_trans_dqresv+0x236/0x440 [xfs]
XFS (dm-0): Corruption detected. Unmount and run xfs_repair
XFS (dm-0): Unmounting Filesystem be6bcbcc-9921-4deb-8d16-7cc94e335fa7
The system is stuck in unmount trying to lock a couple of inodes so that
they can be purged. The dquot corruption notice above is a clue to what
happened -- a link() call tried to set up a transaction to link a child
into a directory. Quota reservation for the transaction failed after IO
errors shut down the filesystem, but then we forgot to unlock the inodes
on our way out. Fix that.
Cc: <stable@vger.kernel.org> # v6.10 Fixes: bd5562111d5839 ("xfs: Hold inode locks in xfs_trans_alloc_dir") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:32 +0000 (10:57 -0800)]
xfs: fix scrub tracepoints when inode-rooted btrees are involved
Fix a minor mistakes in the scrub tracepoints that can manifest when
inode-rooted btrees are enabled. The existing code worked fine for bmap
btrees, but we should tighten the code up to be less sloppy.
Cc: <stable@vger.kernel.org> # v5.7 Fixes: 92219c292af8dd ("xfs: convert btree cursor inode-private member names") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:31 +0000 (10:57 -0800)]
xfs: update btree keys correctly when _insrec splits an inode root block
In commit 2c813ad66a72, I partially fixed a bug wherein xfs_btree_insrec
would erroneously try to update the parent's key for a block that had
been split if we decided to insert the new record into the new block.
The solution was to detect this situation and update the in-core key
value that we pass up to the caller so that the caller will (eventually)
add the new block to the parent level of the tree with the correct key.
However, I missed a subtlety about the way inode-rooted btrees work. If
the full block was a maximally sized inode root block, we'll solve that
fullness by moving the root block's records to a new block, resizing the
root block, and updating the root to point to the new block. We don't
pass a pointer to the new block to the caller because that work has
already been done. The new record will /always/ land in the new block,
so in this case we need to use xfs_btree_update_keys to update the keys.
This bug can theoretically manifest itself in the very rare case that we
split a bmbt root block and the new record lands in the very first slot
of the new block, though I've never managed to trigger it in practice.
However, it is very easy to reproduce by running generic/522 with the
realtime rmapbt patchset if rtinherit=1.
Cc: <stable@vger.kernel.org> # v4.8 Fixes: 2c813ad66a7218 ("xfs: support btrees with overlapping intervals for keys") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:30 +0000 (10:57 -0800)]
xfs: fix null bno_hint handling in xfs_rtallocate_rtg
xfs_bmap_rtalloc initializes the bno_hint variable to NULLRTBLOCK (aka
NULLFSBLOCK). If the allocation request is for a file range that's
adjacent to an existing mapping, it will then change bno_hint to the
blkno hint in the bmalloca structure.
In other words, bno_hint is either a rt block number, or it's all 1s.
Unfortunately, commit ec12f97f1b8a8f didn't take the NULLRTBLOCK state
into account, which means that it tries to translate that into a
realtime extent number. We then end up with an obnoxiously high rtx
number and pointlessly feed that to the near allocator. This often
fails and falls back to the by-size allocator. Seeing as we had no
locality hint anyway, this is a waste of time.
Fix the code to detect a lack of bno_hint correctly. This was detected
by running xfs/009 with metadir enabled and a 28k rt extent size.
Cc: <stable@vger.kernel.org> # v6.12 Fixes: ec12f97f1b8a8f ("xfs: make the rtalloc start hint a xfs_rtblock_t") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:29 +0000 (10:57 -0800)]
xfs: mark metadir repair tempfiles with IRECOVERY
Once in a long while, xfs/566 and xfs/801 report directory corruption in
one of the metadata subdirectories while it's forcibly rebuilding all
filesystem metadata. I observed the following sequence of events:
1. Initiate a repair of the parent pointers for the /quota/user file.
This is the secret file containing user quota data.
2. The pptr repair thread creates a temporary file and begins staging
parent pointers in the ondisk metadata in preparation for an
exchange-range to commit the new pptr data.
3. At the same time, initiate a repair of the /quota directory itself.
4. The dir repair thread finds the temporary file from (2), scans it for
parent pointers, and stages a dirent in its own temporary dir in
preparation to commit the fixed directory.
5. The parent pointer repair completes and frees the temporary file.
6. The dir repair commits the new directory and scans it again. It
finds the dirent that points to the old temporary file in (2) and
marks the directory corrupt.
Oops! Repair code must never scan the temporary files that other repair
functions create to stage new metadata. They're not supposed to do
that, but the predicate function xrep_is_tempfile is incorrect because
it assumes that any XFS_DIFLAG2_METADATA file cannot ever be a temporary
file, but xrep_tempfile_adjust_directory_tree creates exactly that.
Fix this by setting the IRECOVERY flag on temporary metadata directory
inodes and using that to correct the predicate. Repair code is supposed
to erase all the data in temporary files before releasing them, so it's
ok if a thread scans the temporary file after we drop IRECOVERY.
Cc: <stable@vger.kernel.org> # v6.13-rc1 Fixes: bb6cdd5529ff67 ("xfs: hide metadata inodes from everyone because they are special") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:28 +0000 (10:57 -0800)]
xfs: set XFS_SICK_INO_SYMLINK_ZAPPED explicitly when zapping a symlink
If we need to reset a symlink target to the "durr it's busted" string,
then we clear the zapped flag as well. However, this should be using
the provided helper so that we don't set the zapped state on an
otherwise ok symlink.
Cc: <stable@vger.kernel.org> # v6.10 Fixes: 2651923d8d8db0 ("xfs: online repair of symbolic links") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:27 +0000 (10:57 -0800)]
xfs: separate healthy clearing mask during repair
In commit d9041681dd2f53 we introduced some XFS_SICK_*ZAPPED flags so
that the inode record repair code could clean up a damaged inode record
enough to iget the inode but still be able to remember that the higher
level repair code needs to be called. As part of that, we introduced a
xchk_mark_healthy_if_clean helper that is supposed to cause the ZAPPED
state to be removed if that higher level metadata actually checks out.
This was done by setting additional bits in sick_mask hoping that
xchk_update_health will clear all those bits after a healthy scrub.
Unfortunately, that's not quite what sick_mask means -- bits in that
mask are indeed cleared if the metadata is healthy, but they're set if
the metadata is NOT healthy. fsck is only intended to set the ZAPPED
bits explicitly.
If something else sets the CORRUPT/XCORRUPT state after the
xchk_mark_healthy_if_clean call, we end up marking the metadata zapped.
This can happen if the following sequence happens:
1. Scrub runs, discovers that the metadata is fine but could be
optimized and calls xchk_mark_healthy_if_clean on a ZAPPED flag.
That causes the ZAPPED flag to be set in sick_mask because the
metadata is not CORRUPT or XCORRUPT.
2. Repair runs to optimize the metadata.
3. Some other metadata used for cross-referencing in (1) becomes
corrupt.
4. Post-repair scrub runs, but this time it sets CORRUPT or XCORRUPT due
to the events in (3).
5. Now the xchk_health_update sets the ZAPPED flag on the metadata we
just repaired. This is not the correct state.
Fix this by moving the "if healthy" mask to a separate field, and only
ever using it to clear the sick state.
Cc: <stable@vger.kernel.org> # v6.8 Fixes: d9041681dd2f53 ("xfs: set inode sick state flags when we zap either ondisk fork") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:27 +0000 (10:57 -0800)]
xfs: don't drop errno values when we fail to ficlone the entire range
Way back when we first implemented FICLONE for XFS, life was simple --
either the the entire remapping completed, or something happened and we
had to return an errno explaining what happened. Neither of those
ioctls support returning partial results, so it's all or nothing.
Then things got complicated when copy_file_range came along, because it
actually can return the number of bytes copied, so commit 3f68c1f562f1e4
tried to make it so that we could return a partial result if the
REMAP_FILE_CAN_SHORTEN flag is set. This is also how FIDEDUPERANGE can
indicate that the kernel performed a partial deduplication.
Unfortunately, the logic is wrong if an error stops the remapping and
CAN_SHORTEN is not set. Because those callers cannot return partial
results, it is an error for ->remap_file_range to return a positive
quantity that is less than the @len passed in. Implementations really
should be returning a negative errno in this case, because that's what
btrfs (which introduced FICLONE{,RANGE}) did.
Therefore, ->remap_range implementations cannot silently drop an errno
that they might have when the number of bytes remapped is less than the
number of bytes requested and CAN_SHORTEN is not set.
Found by running generic/562 on a 64k fsblock filesystem and wondering
why it reported corrupt files.
Cc: <stable@vger.kernel.org> # v4.20 Fixes: 3fc9f5e409319e ("xfs: remove xfs_reflink_remap_range")
Really-Fixes: 3f68c1f562f1e4 ("xfs: support returning partial reflink results") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:26 +0000 (10:57 -0800)]
xfs: return a 64-bit block count from xfs_btree_count_blocks
With the nrext64 feature enabled, it's possible for a data fork to have
2^48 extent mappings. Even with a 64k fsblock size, that maps out to
a bmbt containing more than 2^32 blocks. Therefore, this predicate must
return a u64 count to avoid an integer wraparound that will cause scrub
to do the wrong thing.
It's unlikely that any such filesystem currently exists, because the
incore bmbt would consume more than 64GB of kernel memory on its own,
and so far nobody except me has driven a filesystem that far, judging
from the lack of complaints.
Cc: <stable@vger.kernel.org> # v5.19 Fixes: df9ad5cc7a5240 ("xfs: Introduce macros to represent new maximum extent counts for data/attr forks") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:25 +0000 (10:57 -0800)]
xfs: keep quota directory inode loaded
In the same vein as the previous patch, there's no point in the metapath
scrub setup function doing a lookup on the quota metadir just so it can
validate that lookups work correctly. Instead, retain the quota
directory inode in memory for the lifetime of the mount so that we can
check this meaningfully.
Cc: <stable@vger.kernel.org> # v6.13-rc1 Fixes: 128a055291ebbc ("xfs: scrub quota file metapaths") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:24 +0000 (10:57 -0800)]
xfs: metapath scrubber should use the already loaded inodes
Don't waste time in xchk_setup_metapath_dqinode doing a second lookup of
the quota inodes, just grab them from the quotainfo structure. The
whole point of this scrubber is to make sure that the dirents exist, so
it's completely silly to do lookups.
Cc: <stable@vger.kernel.org> # v6.13-rc1 Fixes: 128a055291ebbc ("xfs: scrub quota file metapaths") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 2 Dec 2024 18:57:24 +0000 (10:57 -0800)]
xfs: fix off-by-one error in fsmap's end_daddr usage
In commit ca6448aed4f10a, we created an "end_daddr" variable to fix
fsmap reporting when the end of the range requested falls in the middle
of an unknown (aka free on the rmapbt) region. Unfortunately, I didn't
notice that the the code sets end_daddr to the last sector of the device
but then uses that quantity to compute the length of the synthesized
mapping.
Zizhi Wo later observed that when end_daddr isn't set, we still don't
report the last fsblock on a device because in that case (aka when
info->last is true), the info->high mapping that we pass to
xfs_getfsmap_group_helper has a startblock that points to the last
fsblock. This is also wrong because the code uses startblock to
compute the length of the synthesized mapping.
Fix the second problem by setting end_daddr unconditionally, and fix the
first problem by setting start_daddr to one past the end of the range to
query.
Cc: <stable@vger.kernel.org> # v6.11 Fixes: ca6448aed4f10a ("xfs: Fix missing interval for missing_owner in xfs fsmap") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reported-by: Zizhi Wo <wozizhi@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
Linus Torvalds [Wed, 11 Dec 2024 02:21:40 +0000 (18:21 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two reverts and two EN7581 driver fixes:
- Revert the attempt to make CLK_GET_RATE_NOCACHE flag work in
clk_set_rate() because it led to problems with the Qualcomm CPUFreq
driver
- Revert Amlogic reset driver back to the initial implementation.
This broke probe of the audio subsystem on axg based platforms and
also had compilation problems. We'll try again next time.
- Fix a clk frequency and fix array bounds runtime checks in the
Airoha EN7581 driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: en7523: Initialize num before accessing hws in en7523_register_clocks()
clk: en7523: Fix wrong BUS clock for EN7581
clk: amlogic: axg-audio: revert reset implementation
Revert "clk: Fix invalid execution of clk_set_rate"
Linus Torvalds [Wed, 11 Dec 2024 02:18:01 +0000 (18:18 -0800)]
Merge tag 'for-6.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes. Apart from the one liners and updated bio splitting
error handling there's a fix for subvolume mount with different flags.
This was known and fixed for some time but I've delayed it to give it
more testing.
- fix unbalanced locking when swapfile activation fails when the
subvolume gets deleted in the meantime
- add btrfs error handling after bio_split() calls that got error
handling recently
- during unmount, flush delalloc workers at the right time before the
cleaner thread is shut down
- fix regression in buffered write folio conversion, explicitly wait
for writeback as FGP_STABLE flag is currently a no-op on btrfs
- handle race in subvolume mount with different flags, the conversion
to the new mount API did not handle the case where multiple
subvolumes get mounted in parallel, which is a distro use case"
* tag 'for-6.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount
btrfs: handle bio_split() errors
btrfs: properly wait for writeback before buffered write
btrfs: fix missing snapshot drew unlock when root is dead during swap activation
btrfs: fix mount failure due to remount races
Linus Torvalds [Wed, 11 Dec 2024 02:15:25 +0000 (18:15 -0800)]
Merge tag 'probes-fixes-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull eprobes fix from Masami Hiramatsu:
- release eprobe when failing to add dyn_event.
This unregisters event call and release eprobe when it fails to add a
dynamic event. Found in cleaning up.
* tag 'probes-fixes-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/eprobe: Fix to release eprobe when failed to add dyn_event
Linus Torvalds [Mon, 9 Dec 2024 18:31:35 +0000 (10:31 -0800)]
Merge tag 'perf_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Make sure the PEBS buffer is drained before reconfiguring the
hardware
- Add Arrow Lake U support
* tag 'perf_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Unconditionally drain PEBS DS when changing PEBS_DATA_CFG
perf/x86/intel: Add Arrow Lake U support
Linus Torvalds [Mon, 9 Dec 2024 18:28:55 +0000 (10:28 -0800)]
Merge tag 'sched_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Remove wrong enqueueing of a task for a later wakeup when a task
blocks on a RT mutex
- Do not setup a new deadline entity on a boosted task as that has
happened already
- Update preempt= kernel command line param
- Prevent needless softirqd wakeups in the idle task's context
- Detect the case where the idle load balancer CPU becomes busy and
avoid unnecessary load balancing invocation
- Remove an unnecessary load balancing need_resched() call in
nohz_csd_func()
- Allow for raising of SCHED_SOFTIRQ softirq type on RT but retain the
warning to catch any other cases
- Remove a wrong warning when a cpuset update makes the task affinity
no longer a subset of the cpuset
* tag 'sched_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: rtmutex: Fix wake_q logic in task_blocks_on_rt_mutex
sched/deadline: Fix warning in migrate_enable for boosted tasks
sched/core: Update kernel boot parameters for LAZY preempt.
sched/core: Prevent wakeup of ksoftirqd during idle load balance
sched/fair: Check idle_cpu() before need_resched() to detect ilb CPU turning busy
sched/core: Remove the unnecessary need_resched() check in nohz_csd_func()
softirq: Allow raising SCHED_SOFTIRQ from SMP-call-function on RT kernel
sched: fix warning in sched_setaffinity
sched/deadline: Fix replenish_dl_new_period dl_server condition
Damien Le Moal [Sun, 8 Dec 2024 23:53:32 +0000 (08:53 +0900)]
x86: Fix build regression with CONFIG_KEXEC_JUMP enabled
Build 6.13-rc12 for x86_64 with gcc 14.2.1 fails with the error:
ld: vmlinux.o: in function `virtual_mapped':
linux/arch/x86/kernel/relocate_kernel_64.S:249:(.text+0x5915b): undefined reference to `saved_context_gdt_desc'
when CONFIG_KEXEC_JUMP is enabled.
This was introduced by commit 07fa619f2a40 ("x86/kexec: Restore GDT on
return from ::preserve_context kexec") which introduced a use of
saved_context_gdt_desc without a declaration for it.
Fix that by including asm/asm-offsets.h where saved_context_gdt_desc
is defined (indirectly in include/generated/asm-offsets.h which
asm/asm-offsets.h includes).
Fixes: 07fa619f2a40 ("x86/kexec: Restore GDT on return from ::preserve_context kexec") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Closes: https://lore.kernel.org/oe-kbuild-all/202411270006.ZyyzpYf8-lkp@intel.com/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 9 Dec 2024 18:00:25 +0000 (10:00 -0800)]
futex: fix user access on powerpc
The powerpc user access code is special, and unlike other architectures
distinguishes between user access for reading and writing.
And commit 43a43faf5376 ("futex: improve user space accesses") messed
that up. It went undetected elsewhere, but caused ppc32 to fail early
during boot, because the user access had been started with
user_read_access_begin(), but then finished off with just a plain
"user_access_end()".
Note that the address-masking user access helpers don't even have that
read-vs-write distinction, so if powerpc ever wants to do address
masking tricks, we'll have to do some extra work for it.
[ Make sure to also do it for the EFAULT case, as pointed out by
Christophe Leroy ]
Linus Torvalds [Sun, 8 Dec 2024 20:01:06 +0000 (12:01 -0800)]
Merge tag 'kbuild-fixes-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix a section mismatch warning in modpost
- Fix Debian package build error with the O= option
* tag 'kbuild-fixes-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: fix build error with O=
modpost: Add .irqentry.text to OTHER_SECTIONS
Linus Torvalds [Sun, 8 Dec 2024 19:54:04 +0000 (11:54 -0800)]
Merge tag 'irq_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a /proc/interrupts formatting regression
- Have the BCM2836 interrupt controller enter power management states
properly
- Other fixlets
* tag 'irq_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/stm32mp-exti: CONFIG_STM32MP_EXTI should not default to y when compile-testing
genirq/proc: Add missing space separator back
irqchip/bcm2836: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v3: Fix irq_complete_ack() comment
Linus Torvalds [Sun, 8 Dec 2024 19:51:29 +0000 (11:51 -0800)]
Merge tag 'timers_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Handle the case where clocksources with small counter width can,
in conjunction with overly long idle sleeps, falsely trigger the
negative motion detection of clocksources
* tag 'timers_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Make negative motion detection more robust
Linus Torvalds [Sun, 8 Dec 2024 19:38:56 +0000 (11:38 -0800)]
Merge tag 'x86_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Have the Automatic IBRS setting check on AMD does not falsely fire in
the guest when it has been set already on the host
- Make sure cacheinfo structures memory is allocated to address a boot
NULL ptr dereference on Intel Meteor Lake which has different numbers
of subleafs in its CPUID(4) leaf
- Take care of the GDT restoring on the kexec path too, as expected by
the kernel
- Make sure SMP is not disabled when IO-APIC is disabled on the kernel
cmdline
- Add a PGD flag _PAGE_NOPTISHADOW to instruct machinery not to
propagate changes to the kernelmode page tables, to the user portion,
in PTI
- Mark Intel Lunar Lake as affected by an issue where MONITOR wakeups
can get lost and thus user-visible delays happen
- Make sure PKRU is properly restored with XRSTOR on AMD after a PRKU
write of 0 (WRPKRU) which will mark PKRU in its init state and thus
lose the actual buffer
* tag 'x86_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: WARN when setting EFER.AUTOIBRS if and only if the WRMSR fails
x86/cacheinfo: Delete global num_cache_leaves
cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU
x86/kexec: Restore GDT on return from ::preserve_context kexec
x86/cpu/topology: Remove limit of CPUs due to disabled IO/APIC
x86/mm: Add _PAGE_NOPTISHADOW bit to avoid updating userspace page tables
x86/cpu: Add Lunar Lake to list of CPUs with a broken MONITOR implementation
x86/pkeys: Ensure updated PKRU value is XRSTOR'd
x86/pkeys: Change caller of update_pkru_in_sigframe()
Linus Torvalds [Sun, 8 Dec 2024 19:26:13 +0000 (11:26 -0800)]
Merge tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"24 hotfixes. 17 are cc:stable. 15 are MM and 9 are non-MM.
The usual bunch of singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
iio: magnetometer: yas530: use signed integer type for clamp limits
sched/numa: fix memory leak due to the overwritten vma->numab_state
mm/damon: fix order of arguments in damos_before_apply tracepoint
lib: stackinit: hide never-taken branch from compiler
mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio()
scatterlist: fix incorrect func name in kernel-doc
mm: correct typo in MMAP_STATE() macro
mm: respect mmap hint address when aligning for THP
mm: memcg: declare do_memsw_account inline
mm/codetag: swap tags when migrate pages
ocfs2: update seq_file index in ocfs2_dlm_seq_next
stackdepot: fix stack_depot_save_flags() in NMI context
mm: open-code page_folio() in dump_page()
mm: open-code PageTail in folio_flags() and const_folio_flags()
mm: fix vrealloc()'s KASAN poisoning logic
Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()"
selftests/damon: add _damon_sysfs.py to TEST_FILES
selftest: hugetlb_dio: fix test naming
ocfs2: free inode when ocfs2_get_init_inode() fails
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
...
Masahiro Yamada [Sun, 8 Dec 2024 07:56:45 +0000 (16:56 +0900)]
kbuild: deb-pkg: fix build error with O=
Since commit 13b25489b6f8 ("kbuild: change working directory to external
module directory with M="), the Debian package build fails if a relative
path is specified with the O= option.
$ make O=build bindeb-pkg
[ snip ]
dpkg-deb: building package 'linux-image-6.13.0-rc1' in '../linux-image-6.13.0-rc1_6.13.0-rc1-6_amd64.deb'.
Rebuilding host programs with x86_64-linux-gnu-gcc...
make[6]: Entering directory '/home/masahiro/linux/build'
/home/masahiro/linux/Makefile:190: *** specified kernel directory "build" does not exist. Stop.
This occurs because the sub_make_done flag is cleared, even though the
working directory is already in the output directory.
Passing KBUILD_OUTPUT=. resolves the issue.
Fixes: 13b25489b6f8 ("kbuild: change working directory to external module directory with M=") Reported-by: Charlie Jenkins <charlie@rivosinc.com> Closes: https://lore.kernel.org/all/Z1DnP-GJcfseyrM3@ghost/ Tested-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Thomas Gleixner [Sun, 1 Dec 2024 11:17:30 +0000 (12:17 +0100)]
modpost: Add .irqentry.text to OTHER_SECTIONS
The compiler can fully inline the actual handler function of an interrupt
entry into the .irqentry.text entry point. If such a function contains an
access which has an exception table entry, modpost complains about a
section mismatch:
WARNING: vmlinux.o(__ex_table+0x447c): Section mismatch in reference ...
The relocation at __ex_table+0x447c references section ".irqentry.text"
which is not in the list of authorized sections.
Add .irqentry.text to OTHER_SECTIONS to cure the issue.
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # needed for linux-5.4-y Link: https://lore.kernel.org/all/20241128111844.GE10431@google.com/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus Torvalds [Sun, 8 Dec 2024 01:27:25 +0000 (17:27 -0800)]
Merge tag '6.13-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- DFS fix (for race with tree disconnect and dfs cache worker)
- Four fixes for SMB3.1.1 posix extensions:
- improve special file support e.g. to Samba, retrieving the file
type earlier
- reduce roundtrips (e.g. on ls -l, in some cases)
* tag '6.13-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix potential race in cifs_put_tcon()
smb3.1.1: fix posix mounts to older servers
fs/smb/client: cifs_prime_dcache() for SMB3 POSIX reparse points
fs/smb/client: Implement new SMB3 POSIX type
fs/smb/client: avoid querying SMB2_OP_QUERY_WSL_EA for SMB3 POSIX
Linus Torvalds [Sun, 8 Dec 2024 01:17:38 +0000 (17:17 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Large number of small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: scsi_debug: Fix hrtimer support for ndelay
scsi: storvsc: Do not flag MAINTENANCE_IN return of SRB_STATUS_DATA_OVERRUN as an error
scsi: ufs: core: Add missing post notify for power mode change
scsi: sg: Fix slab-use-after-free read in sg_release()
scsi: ufs: core: sysfs: Prevent div by zero
scsi: qla2xxx: Update version to 10.02.09.400-k
scsi: qla2xxx: Supported speed displayed incorrectly for VPorts
scsi: qla2xxx: Fix NVMe and NPIV connect issue
scsi: qla2xxx: Remove check req_sg_cnt should be equal to rsp_sg_cnt
scsi: qla2xxx: Fix use after free on unload
scsi: qla2xxx: Fix abort in bsg timeout
scsi: mpi3mr: Update driver version to 8.12.0.3.50
scsi: mpi3mr: Handling of fault code for insufficient power
scsi: mpi3mr: Start controller indexing from 0
scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
scsi: mpi3mr: Synchronize access to ioctl data buffer
scsi: mpt3sas: Update driver version to 51.100.00.00
scsi: mpt3sas: Diag-Reset when Doorbell-In-Use bit is set during driver load time
scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove()
scsi: ufs: pltfrm: Drop PM runtime reference count after ufshcd_remove()
...
Linus Torvalds [Sat, 7 Dec 2024 18:07:05 +0000 (10:07 -0800)]
Merge tag 'block-6.13-20241207' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Target fix using incorrect zero buffer (Nilay)
- Device specifc deallocate quirk fixes (Christoph, Keith)
- Fabrics fix for handling max command target bugs (Maurizio)
- Cocci fix usage for kzalloc (Yu-Chen)
- DMA size fix for host memory buffer feature (Christoph)
- Fabrics queue cleanup fixes (Chunguang)
- CPU hotplug ordering fixes
- Add missing MODULE_DESCRIPTION for rnull
- bcache error value fix
- virtio-blk queue freeze fix
* tag 'block-6.13-20241207' of git://git.kernel.dk/linux:
blk-mq: move cpuhp callback registering out of q->sysfs_lock
blk-mq: register cpuhp callback after hctx is added to xarray table
virtio-blk: don't keep queue frozen during system suspend
nvme-tcp: simplify nvme_tcp_teardown_io_queues()
nvme-tcp: no need to quiesce admin_q in nvme_tcp_teardown_io_queues()
nvme-rdma: unquiesce admin_q before destroy it
nvme-tcp: fix the memleak while create new ctrl failed
nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary
nvmet: replace kmalloc + memset with kzalloc for data allocation
nvme-fabrics: handle zero MAXCMD without closing the connection
bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again
nvme-pci: remove two deallocate zeroes quirks
block: rnull: add missing MODULE_DESCRIPTION
nvme: don't apply NVME_QUIRK_DEALLOCATE_ZEROES when DSM is not supported
nvmet: use kzalloc instead of ZERO_PAGE in nvme_execute_identify_ns_nvm()
Ingo Molnar [Fri, 6 Dec 2024 09:19:31 +0000 (10:19 +0100)]
headers/cleanup.h: Remove the if_not_guard() facility
Linus noticed that the new if_not_guard() definition is fragile:
"This macro generates actively wrong code if it happens to be inside an
if-statement or a loop without a block.
IOW, code like this:
for (iterate-over-something)
if_not_guard(a)
return -BUSY;
looks like will build fine, but will generate completely incorrect code."
The reason is that the __if_not_guard() macro is multi-statement, so
while most kernel developers expect macros to be simple or at least
compound statements - but for __if_not_guard() it is not so:
To add insult to injury, the placement of the BUILD_BUG_ON() line makes
the macro appear to compile fine, but it will generate incorrect code
as Linus reported, for example if used within iteration or conditional
statements that will use the first statement of a macro as a loop body
or conditional statement body.
[ I'd also like to note that the original submission by David Lechner did
not contain the BUILD_BUG_ON() line, so it was safer than what we ended
up committing. Mea culpa. ]
It doesn't appear to be possible to turn this macro into a robust
single or compound statement that could be used in single statements,
due to the necessity to define an auto scope variable with an open
scope and the necessity of it having to expand to a partial 'if'
statement with no body.
Instead of trying to work around this fragility, just remove the
construct before it gets used.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Lechner <dlechner@baylibre.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/Z1LBnX9TpZLR5Dkf@gmail.com
Linus Torvalds [Fri, 6 Dec 2024 23:07:48 +0000 (15:07 -0800)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann::
- Fix several issues for BPF LPM trie map which were found by syzbot
and during addition of new test cases (Hou Tao)
- Fix a missing process_iter_arg register type check in the BPF
verifier (Kumar Kartikeya Dwivedi, Tao Lyu)
- Fix several correctness gaps in the BPF verifier when interacting
with the BPF stack without CAP_PERFMON (Kumar Kartikeya Dwivedi,
Eduard Zingerman, Tao Lyu)
- Fix OOB BPF map writes when deleting elements for the case of xsk map
as well as devmap (Maciej Fijalkowski)
- Fix xsk sockets to always clear DMA mapping information when
unmapping the pool (Larysa Zaremba)
- Fix sk_mem_uncharge logic in tcp_bpf_sendmsg to only uncharge after
sent bytes have been finalized (Zijian Zhang)
- Fix BPF sockmap with vsocks which was missing a queue check in poll
and sockmap cleanup on close (Michal Luczaj)
- Fix tools infra to override makefile ARCH variable if defined but
empty, which addresses cross-building tools. (Björn Töpel)
- Fix two resolve_btfids build warnings on unresolved bpf_lsm symbols
(Thomas Weißschuh)
- Fix a NULL pointer dereference in bpftool (Amir Mohammadi)
- Fix BPF selftests to check for CONFIG_PREEMPTION instead of
CONFIG_PREEMPT (Sebastian Andrzej Siewior)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (31 commits)
selftests/bpf: Add more test cases for LPM trie
selftests/bpf: Move test_lpm_map.c to map_tests
bpf: Use raw_spinlock_t for LPM trie
bpf: Switch to bpf mem allocator for LPM trie
bpf: Fix exact match conditions in trie_get_next_key()
bpf: Handle in-place update for full LPM trie correctly
bpf: Handle BPF_EXIST and BPF_NOEXIST for LPM trie
bpf: Remove unnecessary kfree(im_node) in lpm_trie_update_elem
bpf: Remove unnecessary check when updating LPM trie
selftests/bpf: Add test for narrow spill into 64-bit spilled scalar
selftests/bpf: Add test for reading from STACK_INVALID slots
selftests/bpf: Introduce __caps_unpriv annotation for tests
bpf: Fix narrow scalar spill onto 64-bit spilled scalar slots
bpf: Don't mark STACK_INVALID as STACK_MISC in mark_stack_slot_misc
samples/bpf: Remove unnecessary -I flags from libbpf EXTRA_CFLAGS
bpf: Zero index arg error string for dynptr and iter
selftests/bpf: Add tests for iter arg check
bpf: Ensure reg is PTR_TO_STACK in process_iter_arg
tools: Override makefile ARCH variable if defined, but empty
selftests/bpf: Add apply_bytes test to test_txmsg_redir_wait_sndmem in test_sockmap
...
Linus Torvalds [Fri, 6 Dec 2024 21:47:55 +0000 (13:47 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Nothing major, some left-overs from the recent merging window (MTE,
coco) and some newly found issues like the ptrace() ones.
- MTE/hugetlbfs:
- Set VM_MTE_ALLOWED in the arch code and remove it from the core
code for hugetlbfs mappings
- Fix copy_highpage() warning when the source is a huge page but
not MTE tagged, taking the wrong small page path
- drivers/virt/coco:
- Add the pKVM and Arm CCA drivers under the arm64 maintainership
- Fix the pkvm driver to fall back to ioremap() (and warn) if the
MMIO_GUARD hypercall fails
- Keep the Arm CCA driver default 'n' rather than 'm'
- A series of fixes for the arm64 ptrace() implementation,
potentially leading to the kernel consuming uninitialised stack
variables when PTRACE_SETREGSET is invoked with a length of 0
- Fix zone_dma_limit calculation when RAM starts below 4GB and
ZONE_DMA is capped to this limit
- Fix early boot warning with CONFIG_DEBUG_VIRTUAL=y triggered by a
call to page_to_phys() (from patch_map()) which checks pfn_valid()
before vmemmap has been set up
- Do not clobber bits 15:8 of the ASID used for TTBR1_EL1 and TLBI
ops when the kernel assumes 8-bit ASIDs but running under a
hypervisor on a system that implements 16-bit ASIDs (found running
Linux under Parallels on Apple M4)
- ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A as it
is using the same SMMU PMCG as HIP09 and suffers from the same
errata
- Add GCS to cpucap_is_possible(), missed in the recent merge"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ptrace: fix partial SETREGSET for NT_ARM_GCS
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
arm64: cpufeature: Add GCS to cpucap_is_possible()
coco: virt: arm64: Do not enable cca guest driver by default
arm64: mte: Fix copy_highpage() warning on hugetlb folios
arm64: Ensure bits ASID[15:8] are masked out when the kernel uses 8-bit ASIDs
ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A
MAINTAINERS: Add CCA and pKVM CoCO guest support to the ARM64 entry
drivers/virt: pkvm: Don't fail ioremap() call if MMIO_GUARD fails
arm64: patching: avoid early page_to_phys()
arm64: mm: Fix zone_dma_limit calculation
arm64: mte: set VM_MTE_ALLOWED for hugetlbfs at correct place
Linus Torvalds [Fri, 6 Dec 2024 21:42:03 +0000 (13:42 -0800)]
Merge tag 'fixes-2024-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Restore check for node validity in arch_numa.
The rework of NUMA initialization in arch_numa dropped a check that
refused to accept configurations with invalid node IDs.
Restore that check to ensure that when firmware passes invalid nodes,
such configuration is rejected and kernel gracefully falls back to
dummy NUMA"
* tag 'fixes-2024-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arch_numa: Restore nid checks before registering a memblock with a node
memblock: allow zero threshold in validate_numa_converage()
* tag 'drm-fixes-2024-12-06' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu: rework resume handling for display (v2)
drm/amd/pm: fix and simplify workload handling
Revert "drm/amd/pm: correct the workload setting"
drm/amdgpu: fix sriov reinit late orders
drm/amdgpu: Fix ISP hw init issue
drm/amd/display: Add hblank borrowing support
drm/amd/display: Limit VTotal range to max hw cap minus fp
drm/amd/display: Correct prefetch calculation
drm/amd/display: Add option to retrieve detile buffer size
drm/amd/display: Add a left edge pixel if in YCbCr422 or YCbCr420 and odm
drm/amdkfd: hard-code cacheline for gc943,gc944
drm/amdkfd: add MEC version that supports no PCIe atomics for GFX12
drm/amd/display: Fix programming backlight on OLED panels
drm/amd: Sanity check the ACPI EDID
drm/amdgpu/hdp7.0: do a posting read when flushing HDP
drm/amdgpu/hdp6.0: do a posting read when flushing HDP
drm/amdgpu/hdp5.2: do a posting read when flushing HDP
drm/amdgpu/hdp5.0: do a posting read when flushing HDP
drm/amdgpu/hdp4.0: do a posting read when flushing HDP
drm/amdgpu/jpeg1.0: fix idle work handler
Linus Torvalds [Fri, 6 Dec 2024 19:52:15 +0000 (11:52 -0800)]
Merge tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Pretty quiet week which is probably expected after US holidays, the
dma-fence and displayport MST message handling fixes make up the bulk
of this, along with a couple of minor xe and other driver fixes.
dma-fence:
- Fix reference leak on fence-merge failure path
- Simplify fence merging with kernel's sort()
- Fix dma_fence_array_signaled() to ensure forward progress
dp_mst:
- Fix MST sideband message body length check
- Fix a bunch of locking/state handling with DP MST msgs
sti:
- Add __iomem for mixer_dbg_mxn()'s parameter
xe:
- Missing init value and 64-bit write-order check
- Fix a memory allocation issue causing lockdep violation
v3d:
- Performance counter fix"
* tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernel:
drm/v3d: Enable Performance Counters before clearing them
drm/dp_mst: Use reset_msg_rx_state() instead of open coding it
drm/dp_mst: Reset message rx state after OOM in drm_dp_mst_handle_up_req()
drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req()
drm/dp_mst: Fix down request message timeout handling
drm/dp_mst: Simplify error path in drm_dp_mst_handle_down_rep()
drm/dp_mst: Verify request type in the corresponding down message reply
drm/dp_mst: Fix resetting msg rx state after topology removal
drm/xe: Move the coredump registration to the worker thread
drm/xe/guc: Fix missing init value and add register order check
drm/sti: Add __iomem for mixer_dbg_mxn's parameter
drm/dp_mst: Fix MST sideband message body length check
dma-buf: fix dma_fence_array_signaled v4
dma-fence: Use kernel's sort for merging fences
dma-fence: Fix reference leak on fence merge failure path
Linus Torvalds [Fri, 6 Dec 2024 19:46:39 +0000 (11:46 -0800)]
Merge tag 'sound-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes that have been gathered in the week.
- Fix the missing XRUN handling in USB-audio low latency mode
- Fix regression by the previous USB-audio hadening change
- Clean up old SH sound driver to use the standard helpers
- A few further fixes for MIDI 2.0 UMP handling
- Various HD-audio and USB-audio quirks
- Fix jack handling at PM on ASoC Intel AVS
- Misc small fixes for ASoC SOF and Mediatek"
* tag 'sound-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix spelling mistake "Firelfy" -> "Firefly"
ASoC: mediatek: mt8188-mt6359: Remove hardcoded dmic codec
ALSA: hda/realtek: fix micmute LEDs don't work on HP Laptops
ALSA: usb-audio: Add extra PID for RME Digiface USB
ALSA: usb-audio: Fix a DMA to stack memory bug
ASoC: SOF: ipc3-topology: fix resource leaks in sof_ipc3_widget_setup_comp_dai()
ALSA: hda/realtek: Add support for Samsung Galaxy Book3 360 (NP730QFG)
ASoC: Intel: avs: da7219: Remove suspend_pre() and resume_post()
ALSA: hda/tas2781: Fix error code tas2781_read_acpi()
ALSA: hda/realtek: Enable mute and micmute LED on HP ProBook 430 G8
ALSA: usb-audio: add mixer mapping for Corsair HS80
ALSA: ump: Shut up truncated string warning
ALSA: sh: Use standard helper for buffer accesses
ALSA: usb-audio: Notify xrun for low-latency mode
ALSA: hda/conexant: fix Z60MR100 startup pop issue
ALSA: ump: Update legacy substream names upon FB info update
ALSA: ump: Indicate the inactive group in legacy substream names
ALSA: ump: Don't open legacy substream for an inactive group
ALSA: seq: ump: Fix seq port updates per FB info notify
Linus Torvalds [Fri, 6 Dec 2024 19:43:22 +0000 (11:43 -0800)]
Merge tag 'regmap-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A couple of small fixes, fixing an incorrect format specifier in a log
message and adding missing cleanup of the devres data used to support
dev_get_regmap() when a device is unregistered"
* tag 'regmap-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: detach regmap from dev on regmap_exit
regmap: Use correct format specifier for logging range errors
Linus Torvalds [Fri, 6 Dec 2024 19:36:48 +0000 (11:36 -0800)]
Merge tag 'spi-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes and device ID updates for SPI.
The Apple change flags the driver as being compatible with the core's
GPIO chip select support, fixing support for some systems"
* tag 'spi-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: omap2-mcspi: Fix the IS_ERR() bug for devm_clk_get_optional_enabled()
spi: intel: Add Panther Lake SPI controller support
spi: apple: Set use_gpio_descriptors to true
spi: mpc52xx: Add cancel_work_sync before module remove
Linus Torvalds [Fri, 6 Dec 2024 19:27:10 +0000 (11:27 -0800)]
Merge tag 'mmc-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Core:
- Further prevent card detect during shutdown
Host drivers:
- sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10
tablet"
* tag 'mmc-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Further prevent card detect during shutdown
mmc: sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10 tablet
Linus Torvalds [Fri, 6 Dec 2024 19:24:00 +0000 (11:24 -0800)]
Merge tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"Core:
- Fix a couple of memory-leaks during genpd init/remove
Providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain
layer"
* tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: gpcv2: Adjust delay after power up handshake
pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails
pmdomain: core: Add missing put_device()
dt-bindings: power: mediatek: Add another nested power-domain layer
Sean Christopherson [Fri, 6 Dec 2024 16:20:06 +0000 (08:20 -0800)]
x86/CPU/AMD: WARN when setting EFER.AUTOIBRS if and only if the WRMSR fails
When ensuring EFER.AUTOIBRS is set, WARN only on a negative return code
from msr_set_bit(), as '1' is used to indicate the WRMSR was successful
('0' indicates the MSR bit was already set).
Fixes: 8cc68c9c9e92 ("x86/CPU/AMD: Make sure EFER[AIBRSE] is set") Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/Z1MkNofJjt7Oq0G6@google.com Closes: https://lore.kernel.org/all/20241205220604.GA2054199@thelio-3990X
Alexei Starovoitov [Fri, 6 Dec 2024 17:14:26 +0000 (09:14 -0800)]
Merge branch 'fixes-for-lpm-trie'
Hou Tao says:
====================
This patch set fixes several issues for LPM trie. These issues were
found during adding new test cases or were reported by syzbot.
The patch set is structured as follows:
Patch #1~#2 are clean-ups for lpm_trie_update_elem().
Patch #3 handles BPF_EXIST and BPF_NOEXIST correctly for LPM trie.
Patch #4 fixes the accounting of n_entries when doing in-place update.
Patch #5 fixes the exact match condition in trie_get_next_key() and it
may skip keys when the passed key is not found in the map.
Patch #6~#7 switch from kmalloc() to bpf memory allocator for LPM trie
to fix several lock order warnings reported by syzbot. It also enables
raw_spinlock_t for LPM trie again. After these changes, the LPM trie will
be closer to being usable in any context (though the reentrance check of
trie->lock is still missing, but it is on my todo list).
Patch #8: move test_lpm_map to map_tests to make it run regularly.
Patch #9: add test cases for the issues fixed by patch #3~#5.
Please see individual patches for more details. Comments are always
welcome.
Change Log:
v3:
* patch #2: remove the unnecessary NULL-init for im_node
* patch #6: alloc the leaf node before disabling IRQ to low
the possibility of -ENOMEM when leaf_size is large; Free
these nodes outside the trie lock (Suggested by Alexei)
* collect review and ack tags (Thanks for Toke & Daniel)
v2: https://lore.kernel.org/bpf/20241127004641.1118269-1-houtao@huaweicloud.com/
* collect review tags (Thanks for Toke)
* drop "Add bpf_mem_cache_is_mergeable() helper" patch
* patch #3~#4: add fix tag
* patch #4: rename the helper to trie_check_add_elem() and increase
n_entries in it.
* patch #6: use one bpf mem allocator and update commit message to
clarify that using bpf mem allocator is more appropriate.
* patch #7: update commit message to add the possible max running time
for update operation.
* patch #9: update commit message to specify the purpose of these test
cases.
Hou Tao [Fri, 6 Dec 2024 11:06:22 +0000 (19:06 +0800)]
selftests/bpf: Add more test cases for LPM trie
Add more test cases for LPM trie in test_maps:
1) test_lpm_trie_update_flags
It constructs various use cases for BPF_EXIST and BPF_NOEXIST and check
whether the return value of update operation is expected.
2) test_lpm_trie_update_full_maps
It tests the update operations on a full LPM trie map. Adding new node
will fail and overwriting the value of existed node will succeed.
3) test_lpm_trie_iterate_strs and test_lpm_trie_iterate_ints
There two test cases test whether the iteration through get_next_key is
sorted and expected. These two test cases delete the minimal key after
each iteration and check whether next iteration returns the second
minimal key. The only difference between these two test cases is the
former one saves strings in the LPM trie and the latter saves integers.
Without the fix of get_next_key, these two cases will fail as shown
below:
test_lpm_trie_iterate_strs(1091):FAIL:iterate #2 got abc exp abS
test_lpm_trie_iterate_ints(1142):FAIL:iterate #1 got 0x2 exp 0x1
Hou Tao [Fri, 6 Dec 2024 11:06:21 +0000 (19:06 +0800)]
selftests/bpf: Move test_lpm_map.c to map_tests
Move test_lpm_map.c to map_tests/ to include LPM trie test cases in
regular test_maps run. Most code remains unchanged, including the use of
assert(). Only reduce n_lookups from 64K to 512, which decreases
test_lpm_map runtime from 37s to 0.7s.
Hou Tao [Fri, 6 Dec 2024 11:06:20 +0000 (19:06 +0800)]
bpf: Use raw_spinlock_t for LPM trie
After switching from kmalloc() to the bpf memory allocator, there will be
no blocking operation during the update of LPM trie. Therefore, change
trie->lock from spinlock_t to raw_spinlock_t to make LPM trie usable in
atomic context, even on RT kernels.
The max value of prefixlen is 2048. Therefore, update or deletion
operations will find the target after at most 2048 comparisons.
Constructing a test case which updates an element after 2048 comparisons
under a 8 CPU VM, and the average time and the maximal time for such
update operation is about 210us and 900us.
Hou Tao [Fri, 6 Dec 2024 11:06:19 +0000 (19:06 +0800)]
bpf: Switch to bpf mem allocator for LPM trie
Multiple syzbot warnings have been reported. These warnings are mainly
about the lock order between trie->lock and kmalloc()'s internal lock.
See report [1] as an example:
======================================================
WARNING: possible circular locking dependency detected 6.10.0-rc7-syzkaller-00003-g4376e966ecb7 #0 Not tainted
------------------------------------------------------
syz.3.2069/15008 is trying to acquire lock: ffff88801544e6d8 (&n->list_lock){-.-.}-{2:2}, at: get_partial_node ...
but task is already holding lock: ffff88802dcc89f8 (&trie->lock){-.-.}-{2:2}, at: trie_update_elem ...
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
A bpf program attached to trace_contention_end() triggers after
acquiring &n->list_lock. The program invokes trie_delete_elem(), which
then acquires trie->lock. However, it is possible that another
process is invoking trie_update_elem(). trie_update_elem() will acquire
trie->lock first, then invoke kmalloc_node(). kmalloc_node() may invoke
get_partial_node() and try to acquire &n->list_lock (not necessarily the
same lock object). Therefore, lockdep warns about the circular locking
dependency.
Invoking kmalloc() before acquiring trie->lock could fix the warning.
However, since BPF programs call be invoked from any context (e.g.,
through kprobe/tracepoint/fentry), there may still be lock ordering
problems for internal locks in kmalloc() or trie->lock itself.
To eliminate these potential lock ordering problems with kmalloc()'s
internal locks, replacing kmalloc()/kfree()/kfree_rcu() with equivalent
BPF memory allocator APIs that can be invoked in any context. The lock
ordering problems with trie->lock (e.g., reentrance) will be handled
separately.
Three aspects of this change require explanation:
1. Intermediate and leaf nodes are allocated from the same allocator.
Since the value size of LPM trie is usually small, using a single
alocator reduces the memory overhead of the BPF memory allocator.
2. Leaf nodes are allocated before disabling IRQs. This handles cases
where leaf_size is large (e.g., > 4KB - 8) and updates require
intermediate node allocation. If leaf nodes were allocated in
IRQ-disabled region, the free objects in BPF memory allocator would not
be refilled timely and the intermediate node allocation may fail.
3. Paired migrate_{disable|enable}() calls for node alloc and free. The
BPF memory allocator uses per-CPU struct internally, these paired calls
are necessary to guarantee correctness.
Hou Tao [Fri, 6 Dec 2024 11:06:18 +0000 (19:06 +0800)]
bpf: Fix exact match conditions in trie_get_next_key()
trie_get_next_key() uses node->prefixlen == key->prefixlen to identify
an exact match, However, it is incorrect because when the target key
doesn't fully match the found node (e.g., node->prefixlen != matchlen),
these two nodes may also have the same prefixlen. It will return
expected result when the passed key exist in the trie. However when a
recently-deleted key or nonexistent key is passed to
trie_get_next_key(), it may skip keys and return incorrect result.
Fix it by using node->prefixlen == matchlen to identify exact matches.
When the condition is true after the search, it also implies
node->prefixlen equals key->prefixlen, otherwise, the search would
return NULL instead.
Hou Tao [Fri, 6 Dec 2024 11:06:17 +0000 (19:06 +0800)]
bpf: Handle in-place update for full LPM trie correctly
When a LPM trie is full, in-place updates of existing elements
incorrectly return -ENOSPC.
Fix this by deferring the check of trie->n_entries. For new insertions,
n_entries must not exceed max_entries. However, in-place updates are
allowed even when the trie is full.
Fixes: b95a5c4db09b ("bpf: add a longest prefix match trie map implementation") Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20241206110622.1161752-5-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Hou Tao [Fri, 6 Dec 2024 11:06:16 +0000 (19:06 +0800)]
bpf: Handle BPF_EXIST and BPF_NOEXIST for LPM trie
Add the currently missing handling for the BPF_EXIST and BPF_NOEXIST
flags. These flags can be specified by users and are relevant since LPM
trie supports exact matches during update.
Fixes: b95a5c4db09b ("bpf: add a longest prefix match trie map implementation") Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20241206110622.1161752-4-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Hou Tao [Fri, 6 Dec 2024 11:06:14 +0000 (19:06 +0800)]
bpf: Remove unnecessary check when updating LPM trie
When "node->prefixlen == matchlen" is true, it means that the node is
fully matched. If "node->prefixlen == key->prefixlen" is false, it means
the prefix length of key is greater than the prefix length of node,
otherwise, matchlen will not be equal with node->prefixlen. However, it
also implies that the prefix length of node must be less than
max_prefixlen.
Therefore, "node->prefixlen == trie->max_prefixlen" will always be false
when the check of "node->prefixlen == key->prefixlen" returns false.
Remove this unnecessary comparison.
Ming Lei [Fri, 6 Dec 2024 11:16:07 +0000 (19:16 +0800)]
blk-mq: move cpuhp callback registering out of q->sysfs_lock
Registering and unregistering cpuhp callback requires global cpu hotplug lock,
which is used everywhere. Meantime q->sysfs_lock is used in block layer
almost everywhere.
It is easy to trigger lockdep warning[1] by connecting the two locks.
Fix the warning by moving blk-mq's cpuhp callback registering out of
q->sysfs_lock. Add one dedicated global lock for covering registering &
unregistering hctx's cpuhp, and it is safe to do so because hctx is
guaranteed to be live if our request_queue is live.
Paulo Alcantara [Fri, 6 Dec 2024 14:49:07 +0000 (11:49 -0300)]
smb: client: fix potential race in cifs_put_tcon()
dfs_cache_refresh() delayed worker could race with cifs_put_tcon(), so
make sure to call list_replace_init() on @tcon->dfs_ses_list after
kworker is cancelled or finished.
Fixes: 4f42a8b54b5c ("smb: client: fix DFS interlink failover") Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Wed, 4 Dec 2024 23:46:00 +0000 (17:46 -0600)]
smb3.1.1: fix posix mounts to older servers
Some servers which implement the SMB3.1.1 POSIX extensions did not
set the file type in the mode in the infolevel 100 response.
With the recent changes for checking the file type via the mode field,
this can cause the root directory to be reported incorrectly and
mounts (e.g. to ksmbd) to fail.
Fixes: 6a832bc8bbb2 ("fs/smb/client: Implement new SMB3 POSIX type") Cc: stable@vger.kernel.org Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Cc: Ralph Boehme <slow@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Filipe Manana [Tue, 3 Dec 2024 11:53:27 +0000 (11:53 +0000)]
btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount
During the unmount path, at close_ctree(), we first stop the cleaner
kthread, using kthread_stop() which frees the associated task_struct, and
then stop and destroy all the work queues. However after we stopped the
cleaner we may still have a worker from the delalloc_workers queue running
inode.c:submit_compressed_extents(), which calls btrfs_add_delayed_iput(),
which in turn tries to wake up the cleaner kthread - which was already
destroyed before, resulting in a use-after-free on the task_struct.
Syzbot reported this with the following stack traces:
BUG: KASAN: slab-use-after-free in __lock_acquire+0x78/0x2100 kernel/locking/lockdep.c:5089
Read of size 8 at addr ffff8880259d2818 by task kworker/u8:3/52
The buggy address belongs to the object at ffff8880259d1e00
which belongs to the cache task_struct of size 7424
The buggy address is located 2584 bytes inside of
freed 7424-byte region [ffff8880259d1e00, ffff8880259d3b00)
Johannes Thumshirn [Tue, 3 Dec 2024 07:40:22 +0000 (23:40 -0800)]
btrfs: handle bio_split() errors
Commit e546fe1da9bd ("block: Rework bio_split() return value") changed
bio_split() so that it can return errors.
Add error handling for it in btrfs_split_bio() and ultimately
btrfs_submit_chunk(). As the bio is not submitted, the bio counter must
be decremented to pair btrfs_bio_counter_inc_blocked().
Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Mon, 2 Dec 2024 21:47:53 +0000 (08:17 +1030)]
btrfs: properly wait for writeback before buffered write
[BUG]
Before commit e820dbeb6ad1 ("btrfs: convert btrfs_buffered_write() to
use folios"), function prepare_one_folio() will always wait for folio
writeback to finish before returning the folio.
However commit e820dbeb6ad1 ("btrfs: convert btrfs_buffered_write() to
use folios") changed to use FGP_STABLE to do the writeback wait, but
FGP_STABLE is calling folio_wait_stable(), which only calls
folio_wait_writeback() if the address space has AS_STABLE_WRITES, which
is not set for btrfs inodes.
This means we will not wait for the folio writeback at all.
[CAUSE]
The cause is FGP_STABLE is not waiting for writeback unconditionally, but
only for address spaces with AS_STABLE_WRITES, normally such flag is set
when the super block has SB_I_STABLE_WRITES flag.
Such super block flag is set when the block device has hardware digest
support or has internal checksum requirement.
I'd argue btrfs should set such super block due to its default data
checksum behavior, but it is not set yet, so this means FGP_STABLE flag
will have no effect at all.
(For NODATASUM inodes, we can skip the waiting in theory but that should
be an optimization in the future.)
This can lead to data checksum mismatch, as we can modify the folio
while it's still under writeback, this will make the contents differ
from the contents at submission and checksum calculation.
[FIX]
Instead of fully relying on FGP_STABLE, manually do the folio writeback
waiting, until we set the address space or super flag.
Fixes: e820dbeb6ad1 ("btrfs: convert btrfs_buffered_write() to use folios") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Ricardo Neri [Thu, 28 Nov 2024 00:22:47 +0000 (16:22 -0800)]
x86/cacheinfo: Delete global num_cache_leaves
Linux remembers cpu_cachinfo::num_leaves per CPU, but x86 initializes all
CPUs from the same global "num_cache_leaves".
This is erroneous on systems such as Meteor Lake, where each CPU has a
distinct num_leaves value. Delete the global "num_cache_leaves" and
initialize num_leaves on each CPU.
init_cache_level() no longer needs to set num_leaves. Also, it never had to
set num_levels as it is unnecessary in x86. Keep checking for zero cache
leaves. Such condition indicates a bug.
Ricardo Neri [Thu, 28 Nov 2024 00:22:46 +0000 (16:22 -0800)]
cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU
Commit
5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU")
adds functionality that architectures can use to optionally allocate and
build cacheinfo early during boot. Commit
6539cffa9495 ("cacheinfo: Add arch specific early level initializer")
lets secondary CPUs correct (and reallocate memory) cacheinfo data if
needed.
If the early build functionality is not used and cacheinfo does not need
correction, memory for cacheinfo is never allocated. x86 does not use
the early build functionality. Consequently, during the cacheinfo CPU
hotplug callback, last_level_cache_is_valid() attempts to dereference
a NULL pointer:
Allocate memory for cacheinfo during the cacheinfo CPU hotplug callback
if not done earlier.
Moreover, before determining the validity of the last-level cache info,
ensure that it has been allocated. Simply checking for non-zero
cache_leaves() is not sufficient, as some architectures (e.g., Intel
processors) have non-zero cache_leaves() before allocation.
Dereferencing NULL cacheinfo can occur in update_per_cpu_data_slice_size().
This function iterates over all online CPUs. However, a CPU may have come
online recently, but its cacheinfo may not have been allocated yet.
While here, remove an unnecessary indentation in allocate_cache_info().
[ bp: Massage. ]
Fixes: 6539cffa9495 ("cacheinfo: Add arch specific early level initializer") Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Radu Rendec <rrendec@redhat.com> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Reviewed-by: Andreas Herrmann <aherrmann@suse.de> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Cc: stable@vger.kernel.org # 6.3+ Link: https://lore.kernel.org/r/20241128002247.26726-2-ricardo.neri-calderon@linux.intel.com
David Woodhouse [Thu, 5 Dec 2024 15:05:07 +0000 (15:05 +0000)]
x86/kexec: Restore GDT on return from ::preserve_context kexec
The restore_processor_state() function explicitly states that "the asm code
that gets us here will have restored a usable GDT". That wasn't true in the
case of returning from a ::preserve_context kexec. Make it so.
Without this, the kernel was depending on the called function to reload a
GDT which is appropriate for the kernel before returning.
Jakob Hauser [Fri, 29 Nov 2024 21:25:07 +0000 (22:25 +0100)]
iio: magnetometer: yas530: use signed integer type for clamp limits
In the function yas537_measure() there is a clamp_val() with limits of
-BIT(13) and BIT(13) - 1. The input clamp value h[] is of type s32. The
BIT() is of type unsigned long integer due to its define in
include/vdso/bits.h. The lower limit -BIT(13) is recognized as -8192 but
expressed as an unsigned long integer. The size of an unsigned long
integer differs between 32-bit and 64-bit architectures. Converting this
to type s32 may lead to undesired behavior.
Additionally, in the calculation lines h[0], h[1] and h[2] the unsigned
long integer divisor BIT(13) causes an unsigned division, shifting the
left-hand side of the equation back and forth, possibly ending up in large
positive values instead of negative values on 32-bit architectures.
To solve those two issues, declare a signed integer with a value of
BIT(13).
There is another omission in the clamp line: clamp_val() returns a value
and it's going nowhere here. Self-assign it to h[i] to make use of the
clamp macro.
Finally, replace clamp_val() macro by clamp() because after changing the
limits from type unsigned long integer to signed integer it's fine that
way.
Link: https://lkml.kernel.org/r/11609b2243c295d65ab4d47e78c239d61ad6be75.1732914810.git.jahau@rocketmail.com Fixes: 65f79b501030 ("iio: magnetometer: yas530: Add YAS537 variant") Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202411230458.dhZwh3TT-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202411282222.oF0B4110-lkp@intel.com/ Reviewed-by: David Laight <david.laight@aculab.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This issue can be consistently reproduced on three different servers:
* a 448-core server
* a 256-core server
* a 192-core server
[Root Cause]
Since multiple threads are created by the hackbench program (along with
the command argument 'thread'), a shared vma might be accessed by two or
more cores simultaneously. When two or more cores observe that
vma->numab_state is NULL at the same time, vma->numab_state will be
overwritten.
Although current code ensures that only one thread scans the VMAs in a
single 'numa_scan_period', there might be a chance for another thread
to enter in the next 'numa_scan_period' while we have not gotten till
numab_state allocation [1].
Note that the command `/opt/ltp/testcases/bin/hackbench 50 process 1000`
cannot the reproduce the issue. It is verified with 200+ test runs.
[Solution]
Use the cmpxchg atomic operation to ensure that only one thread executes
the vma->numab_state assignment.
Kees Cook [Sun, 17 Nov 2024 11:38:13 +0000 (03:38 -0800)]
lib: stackinit: hide never-taken branch from compiler
The never-taken branch leads to an invalid bounds condition, which is by
design. To avoid the unwanted warning from the compiler, hide the
variable from the optimizer.
../lib/stackinit_kunit.c: In function 'do_nothing_u16_zero':
../lib/stackinit_kunit.c:51:49: error: array subscript 1 is outside array bounds of 'u16[0]' {aka 'short unsigned int[]'} [-Werror=array-bounds=]
51 | #define DO_NOTHING_RETURN_SCALAR(ptr) *(ptr)
| ^~~~~~
../lib/stackinit_kunit.c:219:24: note: in expansion of macro 'DO_NOTHING_RETURN_SCALAR'
219 | return DO_NOTHING_RETURN_ ## which(ptr + 1); \
| ^~~~~~~~~~~~~~~~~~
David Hildenbrand [Fri, 29 Nov 2024 12:53:03 +0000 (13:53 +0100)]
mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio()
The folio can get freed + buddy-merged + reallocated in the meantime,
resulting in us calling folio_test_locked() possibly on a tail page.
This makes const_folio_flags VM_BUG_ON_PGFLAGS() when stumbling over the
tail page.
Could this result in other issues? Doesn't look like it. False positives
and false negatives don't really matter, because this folio would get
skipped either way when detecting that they have been reallocated in the
meantime.
Fix it by performing the folio_test_locked() checked after grabbing a
reference. If this ever becomes a real problem, we could add a special
helper that racily checks if the bit is set even on tail pages ... but
let's hope that's not required so we can just handle it cleaner: work on
the folio after we hold a reference.
Do we really need the folio_test_locked() check if we are going to trylock
briefly after? Well, we can at least avoid a xas_reload().
It's a bit unclear which exact change introduced that issue. Likely, ever
since we made PG_locked obey to the PF_NO_TAIL policy it could have been
triggered in some way.
Link: https://lkml.kernel.org/r/20241129125303.4033164-1-david@redhat.com Fixes: 48c935ad88f5 ("page-flags: define PG_locked behavior on compound pages") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: syzbot+9f9a7f73fb079b2387a6@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/674184c9.050a0220.1cc393.0001.GAE@google.com/ Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Randy Dunlap [Sat, 30 Nov 2024 02:24:06 +0000 (18:24 -0800)]
scatterlist: fix incorrect func name in kernel-doc
Fix a kernel-doc warning by making the kernel-doc function description
match the function name:
include/linux/scatterlist.h:323: warning: expecting prototype for sg_unmark_bus_address(). Prototype was for sg_dma_unmark_bus_address() instead
Link: https://lkml.kernel.org/r/20241130022406.537973-1-rdunlap@infradead.org Fixes: 42399301203e ("lib/scatterlist: add flag for indicating P2PDMA segments in an SGL") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Mon, 18 Nov 2024 17:54:14 +0000 (17:54 +0000)]
mm: correct typo in MMAP_STATE() macro
We mistakenly refer to len rather than len_ here. The only existing
caller passes len to the len_ parameter so this has no impact on the code,
but it is obviously incorrect to do this, so fix it.
Link: https://lkml.kernel.org/r/20241118175414.390827-1-lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Cc: Jann Horn <jannh@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kalesh Singh [Mon, 18 Nov 2024 21:46:48 +0000 (13:46 -0800)]
mm: respect mmap hint address when aligning for THP
Commit efa7df3e3bb5 ("mm: align larger anonymous mappings on THP
boundaries") updated __get_unmapped_area() to align the start address for
the VMA to a PMD boundary if CONFIG_TRANSPARENT_HUGEPAGE=y.
It does this by effectively looking up a region that is of size,
request_size + PMD_SIZE, and aligning up the start to a PMD boundary.
Commit 4ef9ad19e176 ("mm: huge_memory: don't force huge page alignment on
32 bit") opted out of this for 32bit due to regressions in mmap base
randomization.
Commit d4148aeab412 ("mm, mmap: limit THP alignment of anonymous mappings
to PMD-aligned sizes") restricted this to only mmap sizes that are
multiples of the PMD_SIZE due to reported regressions in some performance
benchmarks -- which seemed mostly due to the reduced spatial locality of
related mappings due to the forced PMD-alignment.
Another unintended side effect has emerged: When a user specifies an mmap
hint address, the THP alignment logic modifies the behavior, potentially
ignoring the hint even if a sufficiently large gap exists at the requested
hint location.
Example Scenario:
Consider the following simplified virtual address (VA) space:
...
0x200000-0x400000 --- VMA A
0x400000-0x600000 --- Hole
0x600000-0x800000 --- VMA B
...
A call to mmap() with hint=0x400000 and len=0x200000 behaves differently:
- Before THP alignment: The requested region (size 0x200000) fits into
the gap at 0x400000, so the hint is respected.
- After alignment: The logic searches for a region of size
0x400000 (len + PMD_SIZE) starting at 0x400000.
This search fails due to the mapping at 0x600000 (VMA B), and the hint
is ignored, falling back to arch_get_unmapped_area[_topdown]().
In general the hint is effectively ignored, if there is any existing
mapping in the below range:
This changes the semantics of mmap hint; from ""Respect the hint if a
sufficiently large gap exists at the requested location" to "Respect the
hint only if an additional PMD-sized gap exists beyond the requested
size".
This has performance implications for allocators that allocate their heap
using mmap but try to keep it "as contiguous as possible" by using the end
of the exisiting heap as the address hint. With the new behavior it's
more likely to get a much less contiguous heap, adding extra fragmentation
and performance overhead.
To restore the expected behavior; don't use
thp_get_unmapped_area_vmflags() when the user provided a hint address, for
anonymous mappings.
Note: As Yang Shi pointed out: the issue still remains for filesystems
which are using thp_get_unmapped_area() for their get_unmapped_area() op.
It is unclear what worklaods will regress for if we ignore THP alignment
when the hint address is provided for such file backed mappings -- so this
fix will be handled separately.
Link: https://lkml.kernel.org/r/20241118214650.3667577-1-kaleshsingh@google.com Fixes: efa7df3e3bb5 ("mm: align larger anonymous mappings on THP boundaries") Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Reviewed-by: Rik van Riel <riel@surriel.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <yang@os.amperecomputing.com> Cc: Rik van Riel <riel@surriel.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hans Boehm <hboehm@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
John Sperbeck [Thu, 28 Nov 2024 20:39:59 +0000 (12:39 -0800)]
mm: memcg: declare do_memsw_account inline
In commit 66d60c428b23 ("mm: memcg: move legacy memcg event code into
memcontrol-v1.c"), the static do_memsw_account() function was moved from a
.c file to a .h file. Unfortunately, the traditional inline keyword
wasn't added. If a file (e.g., a unit test) includes the .h file, but
doesn't refer to do_memsw_account(), it will get a warning like:
David Wang [Fri, 29 Nov 2024 02:52:13 +0000 (10:52 +0800)]
mm/codetag: swap tags when migrate pages
Current solution to adjust codetag references during page migration is
done in 3 steps:
1. sets the codetag reference of the old page as empty (not pointing
to any codetag);
2. subtracts counters of the new page to compensate for its own
allocation;
3. sets codetag reference of the new page to point to the codetag of
the old page.
This does not work if CONFIG_MEM_ALLOC_PROFILING_DEBUG=n because
set_codetag_empty() becomes NOOP. Instead, let's simply swap codetag
references so that the new page is referencing the old codetag and the old
page is referencing the new codetag. This way accounting stays valid and
the logic makes more sense.
Link: https://lkml.kernel.org/r/20241129025213.34836-1-00107082@163.com Fixes: e0a955bf7f61 ("mm/codetag: add pgalloc_tag_copy()") Signed-off-by: David Wang <00107082@163.com> Closes: https://lore.kernel.org/lkml/20241124074318.399027-1-00107082@163.com/ Acked-by: Suren Baghdasaryan <surenb@google.com> Suggested-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Yu Zhao <yuzhao@google.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wengang Wang [Tue, 19 Nov 2024 17:45:00 +0000 (09:45 -0800)]
ocfs2: update seq_file index in ocfs2_dlm_seq_next
The following INFO level message was seen:
seq_file: buggy .next function ocfs2_dlm_seq_next [ocfs2] did not
update position index
Fix:
Update *pos (so m->index) to make seq_read_iter happy though the index its
self makes no sense to ocfs2_dlm_seq_next.
Link: https://lkml.kernel.org/r/20241119174500.9198-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Marco Elver [Fri, 22 Nov 2024 15:39:47 +0000 (16:39 +0100)]
stackdepot: fix stack_depot_save_flags() in NMI context
Per documentation, stack_depot_save_flags() was meant to be usable from
NMI context if STACK_DEPOT_FLAG_CAN_ALLOC is unset. However, it still
would try to take the pool_lock in an attempt to save a stack trace in the
current pool (if space is available).
This could result in deadlock if an NMI is handled while pool_lock is
already held. To avoid deadlock, only try to take the lock in NMI context
and give up if unsuccessful.
The documentation is fixed to clearly convey this.
Link: https://lkml.kernel.org/r/Z0CcyfbPqmxJ9uJH@elver.google.com Link: https://lkml.kernel.org/r/20241122154051.3914732-1-elver@google.com Fixes: 4434a56ec209 ("stackdepot: make fast paths lock-less again") Signed-off-by: Marco Elver <elver@google.com> Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Mon, 25 Nov 2024 20:17:19 +0000 (20:17 +0000)]
mm: open-code page_folio() in dump_page()
page_folio() calls page_fixed_fake_head() which will misidentify this page
as being a fake head and load off the end of 'precise'. We may have a
pointer to a fake head, but that's OK because it contains the right
information for dump_page().
gcc-15 is smart enough to catch this with -Warray-bounds:
In function 'page_fixed_fake_head',
inlined from '_compound_head' at ../include/linux/page-flags.h:251:24,
inlined from '__dump_page' at ../mm/debug.c:123:11:
../include/asm-generic/rwonce.h:44:26: warning: array subscript 9 is outside
+array bounds of 'struct page[1]' [-Warray-bounds=]
Matthew Wilcox (Oracle) [Mon, 25 Nov 2024 20:17:18 +0000 (20:17 +0000)]
mm: open-code PageTail in folio_flags() and const_folio_flags()
It is unsafe to call PageTail() in dump_page() as page_is_fake_head() will
almost certainly return true when called on a head page that is copied to
the stack. That will cause the VM_BUG_ON_PGFLAGS() in const_folio_flags()
to trigger when it shouldn't. Fortunately, we don't need to call
PageTail() here; it's fine to have a pointer to a virtual alias of the
page's flag word rather than the real page's flag word.
Andrii Nakryiko [Tue, 26 Nov 2024 00:52:06 +0000 (16:52 -0800)]
mm: fix vrealloc()'s KASAN poisoning logic
When vrealloc() reuses already allocated vmap_area, we need to re-annotate
poisoned and unpoisoned portions of underlying memory according to the new
size.
This results in a KASAN splat recorded at [1]. A KASAN mis-reporting
issue where there is none.
Note, hard-coding KASAN_VMALLOC_PROT_NORMAL might not be exactly correct,
but KASAN flag logic is pretty involved and spread out throughout
__vmalloc_node_range_noprof(), so I'm using the bare minimum flag here and
leaving the rest to mm people to refactor this logic and reuse it here.
Anders and Philippe have reported that recent kernels occasionally hang
when used with NFS in readahead code. The problem has been bisected to 7c877586da3 ("readahead: properly shorten readahead when falling back to
do_page_cache_ra()"). The cause of the problem is that ra->size can be
shrunk by read_pages() call and subsequently we end up calling
do_page_cache_ra() with negative (read huge positive) number of pages.
Let's revert 7c877586da3 for now until we can find a proper way how the
logic in read_pages() and page_cache_ra_order() can coexist. This can
lead to reduced readahead throughput due to readahead window confusion but
that's better than outright hangs.
Link: https://lkml.kernel.org/r/20241126145208.985-1-jack@suse.cz Fixes: 7c877586da31 ("readahead: properly shorten readahead when falling back to do_page_cache_ra()") Reported-by: Anders Blomdell <anders.blomdell@gmail.com> Reported-by: Philippe Troin <phil@fifi.org> Signed-off-by: Jan Kara <jack@suse.cz> Tested-by: Philippe Troin <phil@fifi.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Brown [Wed, 27 Nov 2024 16:14:22 +0000 (16:14 +0000)]
selftest: hugetlb_dio: fix test naming
The string logged when a test passes or fails is used by the selftest
framework to identify which test is being reported. The hugetlb_dio test
not only uses the same strings for every test that is run but it also uses
different strings for test passes and failures which means that test
automation is unable to follow what the test is doing at all.
Pull the existing duplicated logging of the number of free huge pages
before and after the test out of the conditional and replace that and the
logging of the result with a single ksft_print_result() which incorporates
the parameters passed into the test into the output.
Link: https://lkml.kernel.org/r/20241127-kselftest-mm-hugetlb-dio-names-v1-1-22aab01bf550@kernel.org Fixes: fae1980347bf ("selftests: hugetlb_dio: fixup check for initial conditions to skip in the start") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Donet Tom <donettom@linux.ibm.com> Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tetsuo Handa [Sat, 23 Nov 2024 13:28:34 +0000 (22:28 +0900)]
ocfs2: free inode when ocfs2_get_init_inode() fails
syzbot is reporting busy inodes after unmount, for commit 9c89fe0af826
("ocfs2: Handle error from dquot_initialize()") forgot to call iput() when
new_inode() succeeded and dquot_initialize() failed.
Link: https://lkml.kernel.org/r/e68c0224-b7c6-4784-b4fa-a9fc8c675525@I-love.SAKURA.ne.jp Fixes: 9c89fe0af826 ("ocfs2: Handle error from dquot_initialize()") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot+0af00f6a2cba2058b5db@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0af00f6a2cba2058b5db Tested-by: syzbot+0af00f6a2cba2058b5db@syzkaller.appspotmail.com Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryusuke Konishi [Tue, 19 Nov 2024 17:23:37 +0000 (02:23 +0900)]
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
Syzbot reported that when searching for records in a directory where the
inode's i_size is corrupted and has a large value, memory access outside
the folio/page range may occur, or a use-after-free bug may be detected if
KASAN is enabled.
This is because nilfs_last_byte(), which is called by nilfs_find_entry()
and others to calculate the number of valid bytes of directory data in a
page from i_size and the page index, loses the upper 32 bits of the 64-bit
size information due to an inappropriate type of local variable to which
the i_size value is assigned.
This caused a large byte offset value due to underflow in the end address
calculation in the calling nilfs_find_entry(), resulting in memory access
that exceeds the folio/page size.
Fix this issue by changing the type of the local variable causing the bit
loss from "unsigned int" to "u64". The return value of nilfs_last_byte()
is also of type "unsigned int", but it is truncated so as not to exceed
PAGE_SIZE and no bit loss occurs, so no change is required.
Jared Kangas [Tue, 19 Nov 2024 21:02:34 +0000 (13:02 -0800)]
kasan: make report_lock a raw spinlock
If PREEMPT_RT is enabled, report_lock is a sleeping spinlock and must not
be locked when IRQs are disabled. However, KASAN reports may be triggered
in such contexts. For example:
char *s = kzalloc(1, GFP_KERNEL);
kfree(s);
local_irq_disable();
char c = *s; /* KASAN report here leads to spin_lock() */
local_irq_enable();
Make report_spinlock a raw spinlock to prevent rescheduling when
PREEMPT_RT is enabled.
Link: https://lkml.kernel.org/r/20241119210234.1602529-1-jkangas@redhat.com Fixes: 342a93247e08 ("locking/spinlock: Provide RT variant header: <linux/spinlock_rt.h>") Signed-off-by: Jared Kangas <jkangas@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
John Hubbard [Thu, 21 Nov 2024 03:49:33 +0000 (19:49 -0800)]
mm/gup: handle NULL pages in unpin_user_pages()
The recent addition of "pofs" (pages or folios) handling to gup has a
flaw: it assumes that unpin_user_pages() handles NULL pages in the pages**
array. That's not the case, as I discovered when I ran on a new
configuration on my test machine.
Fix this by skipping NULL pages in unpin_user_pages(), just like
unpin_folios() already does.
Details: when booting on x86 with "numa=fake=2 movablecore=4G" on Linux
6.12, and running this:
Andrew Morton [Thu, 14 Nov 2024 23:44:21 +0000 (15:44 -0800)]
fs/proc/vmcore.c: fix warning when CONFIG_MMU=n
>> fs/proc/vmcore.c:424:19: warning: 'mmap_vmcore_fault' defined but not used [-Wunused-function]
424 | static vm_fault_t mmap_vmcore_fault(struct vm_fault *vmf)
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202411140156.2o0nS4fl-lkp@intel.com/ Cc: Qi Xi <xiqi2@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Thu, 5 Dec 2024 23:11:39 +0000 (15:11 -0800)]
Merge tag 'audit-pr-20241205' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit build problem workaround from Paul Moore:
"A minor audit patch that shuffles some code slightly to workaround a
GCC bug affecting a number of people.
The GCC folks have been able to reproduce the problem and are
discussing solutions (see the bug report link in the commit), but
since the workaround is trivial let's do that in the kernel so we can
unblock people who are hitting this"
* tag 'audit-pr-20241205' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: workaround a GCC bug triggered by task comm changes
Linus Torvalds [Thu, 5 Dec 2024 23:02:20 +0000 (15:02 -0800)]
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"One bug fix and some documentation updates:
- Correct typos in comments
- Elaborate a comment about how the uAPI works for
IOMMU_HW_INFO_TYPE_ARM_SMMUV3
- Fix a double free on error path and add test coverage for the bug"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/arm-smmu-v3: Improve uAPI comment for IOMMU_HW_INFO_TYPE_ARM_SMMUV3
iommufd/selftest: Cover IOMMU_FAULT_QUEUE_ALLOC in iommufd_fail_nth
iommufd: Fix out_fput in iommufd_fault_alloc()
iommufd: Fix typos in kernel-doc comments
projects / users / hch / misc.git / log