Merge tag 'asoc-v6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.18 round 2
Some more updates for v6.18, mostly fixes for the earlier pull request
with some cleanups and more minor fixes for older code. We do have one
new driver, the TI TAS2783A, and some quirks for new platforms.
It accepts strings like `VID:PID:quirk_flag_name1|quirk_flag_name2;...`
from now on, so that we can use it to debug USB audio devices more
intuitive and flexible. The compatibility of previous form is kept.
ALSA: compress: document 'chan_map' member in snd_dec_opus
When building kernel docs, the following warning appeared:
WARNING: ./include/uapi/sound/compress_params.h:364
struct member 'chan_map' not described in 'snd_dec_opus'
The inline struct 'snd_dec_opus_ch_map' inside 'snd_dec_opus' was not
properly documented. This patch documents the 'chan_map' member and its
fields (stream_count, coupled_count, channel_map), resolving the warning.
Fixes: 5d36370f3431 ("ALSA: compress: add raw opus codec define and opus decoder structs") Suggested-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Richard Fitzgerald [Tue, 23 Sep 2025 13:03:25 +0000 (14:03 +0100)]
ASoC: cs35l56: Set fw_regs table after getting REVID
Defer setting the cs35l56_base.fw_regs pointer until after the REVID has
been read in cs35l56_hw_init(). Also make the corresponding change to the
cs35l56_hda drivers to prevent a build break.
This is preparing for firmware registers that change address between
revisions of the same device.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Add quirk for HP Spectre 14t-ea100
HP-Spectre 14t-ea100 model has no speaker output unless booting
previously from Windows on dual boot, a reboot while on Linux will
stop the speakers working. Applying the existing quirk for HP Spectre
X360 EU0xxx seems fixing this speaker problem.
Dan Carpenter [Fri, 26 Sep 2025 04:03:11 +0000 (07:03 +0300)]
ASoc: tas2783A: Fix an error code in probe()
This code returns the wrong variable "tas_dev->regmap" instead of
"regmap" so it returns success instead of a negative error code.
Return the correct variable.
Fixes: 4cc9bd8d7b32 ("ASoc: tas2783A: Add soundwire based codec driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/aNYQf4cyavnku5Nt@stanley.mountain Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: tlv320aic3x: Fix class-D initialization for tlv320aic3007
The problem of having class-D initialization sequence in probe using
regmap_register_patch() is that it will do hardware register writes
immediately after being called as it bypasses regcache. Afterwards, in
aic3x_init() we also perform codec soft reset, rendering class-D init
sequence pointless. This issue is even more apparent when using reset
GPIO line, since in that case class-D amplifier initialization fails
with "Failed to init class D: -5" message as codec is already held in
reset state after requesting the reset GPIO and hence hardware I/O
fails with -EIO errno.
Thus move class-D amplifier initialization sequence from probe function
to aic3x_set_power() just before the usual regcache sync. Use bypassed
regmap_multi_reg_write_bypassed() function to make sure, class-D init
sequence is performed in proper order as described in the datasheet.
ASoC: qcom: sc8280xp: use sa8775p/ subdir for QCS9100 / QCS9075
All firmware for the Lemans platform aka QCS9100 aka QCS9075 is for
historical reasons located in the qcom/sa8775p/ subdir inside
linux-firmware. The only exceptions to this rule are audio topology
files. While it's not too late, change the subdir to point to the
sa8775p/ subdir, so that all firmware for that platform is present at
the same location.
Fixes: 5b5bf5922f4c ("ASoC: qcom: sc8280xp: Add sound card support for QCS9100 and QCS9075") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Link: https://patch.msgid.link/20250924-lemans-evk-topo-v2-1-7d44909a5758@oss.qualcomm.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: stm32: sai: manage context in set_sysclk callback
The mclk direction now needs to be specified in endpoint node with
"system-clock-direction-out" property. However some calls to the
set_sysclk callback, related to CPU DAI clock, result in unbalanced
calls to clock API.
The set_sysclk callback in STM32 SAI driver is intended only for mclk
management. So it is relevant to ensure that calls to set_sysclk are
related to mclk only.
Since the master clock is handled only at runtime, skip the calls to
set_sysclk in the initialization phase.
Renesas have tried to minimize the occurrence of FSERR errors as much as
possible, but unfortunately we cannot remove them completely, because
MSIOF might setup its register during CLK/SYNC are inputed. It can be
happen because MSIOF is working as Clock/Frame Consumer.
ASoC: renesas: msiof: Add note for The possibility of R/L opposite Capture
This driver is assuming MSIOF is used as Clock/Frame Consumer Mode, and
there is a case that some Codec (= Clock/Frame Provider) might output
Clock/Frame before setup MSIOF.
And, MSIOF will capture data without checking SYNC signal Hi/Low (= R/L).
This means, if MSIOF RXE bit was set as 1 in case of SYNC signal was Hi
(= R) timing, it will start capture data since next SYNC low signal (= L).
Because Linux assumes sound data is lined up as R->L->R->L->..., the data
R/L might be opposite.
The only solution in this case is start CLK/SYNC *after* MSIOF settings,
but it depends when and how Codec driver start it.
ASoC: renesas: msiof: setup both (Playback/Capture) in the same time
SITMDRn / SIRMDRn and some other registers should not be updated during
working even though it was not related the target direction (for example,
do TX settings during RX is working), otherwise it cause a FSERR.
Setup both direction (Playback/Capture) in the same time.
MSIOF has TXRST/RXRST to reset FIFO, but it shouldn't be used during SYNC
signal was asserted, because it will be cause of HW issue.
When MSIOF is used as Sound driver, this driver is assuming it is used as
clock consumer mode (= Codec is clock provider). This means, it can't
control SYNC signal by itself.
We need to use SW reset (= reset_control_xxx()) instead of TXRST/RXRST.
Dan Carpenter [Tue, 23 Sep 2025 11:28:39 +0000 (14:28 +0300)]
ASoC: codecs: wcd-common: fix signedness bug in wcd_dt_parse_micbias_info()
The error handling does not work because common->micb_vout[] is an array
of u32. We need a signed variable to store negative error codes.
Fixes: 4f16b6351bbf ("ASoC: codecs: wcd: add common helper for wcd codecs") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Link: https://patch.msgid.link/aNKEZ3VqJ8js208v@stanley.mountain Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Julien Massot <julien.massot@collabora.com>:
This patch series continues the effort to address Device Tree validation
warnings for MediaTek platforms, with a focus on MT8183. It follows the
initial cleanup series by Angelo
(https://www.spinics.net/lists/kernel/msg5780177.html).
The patches in this set eliminate several of the remaining warnings by
improving or converting DT bindings to DT schema, adding missing properties,
and updating device tree files accordingly.
Julien Massot [Tue, 26 Aug 2025 07:39:38 +0000 (09:39 +0200)]
ASoC: Convert MT8183 DA7219 sound card to DT schema
Convert the Device Tree binding for MT8183-based boards using the
DA7219 headset codec and optional MAX98357, RT1015 or RT1015P speaker
amplifiers from the legacy .txt format to DT schema.
This improves binding validation and removes DT schema warnings
for boards using these audio components.
Ma Ke [Tue, 23 Sep 2025 06:52:12 +0000 (14:52 +0800)]
ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()
wcd934x_codec_parse_data() contains a device reference count leak in
of_slim_get_device() where device_find_child() increases the reference
count of the device but this reference is not properly decreased in
the success path. Add put_device() in wcd934x_codec_parse_data() and
add devm_add_action_or_reset() in the probe function, which ensures
that the reference count of the device is correctly managed.
Memory leak in regmap_init_slimbus() as the allocated regmap is not
released when the device is removed. Using devm_regmap_init_slimbus()
instead of regmap_init_slimbus() to ensure automatic regmap cleanup on
device removal.
Calling path: of_slim_get_device() -> of_find_slim_device() ->
device_find_child(). As comment of device_find_child() says, 'NOTE:
you will need to drop the reference with put_device() after use.'.
Found by code review.
Cc: stable@vger.kernel.org Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://patch.msgid.link/20250923065212.26660-1-make24@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Tue, 23 Sep 2025 08:28:45 +0000 (10:28 +0200)]
Support reading Subsystem ID from Device Tree
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
In PC systems using ACPI, the driver is able to read back an SSID from
the _SUB property. This SSID uniquely identifies the system, which
enables the driver to read the correct firmware and tuning for that
system from linux-firmware. Currently there is no way of reading this
property from device tree. Add an equivalent property in device tree
to perform the same role.
ALSA: usb-audio: don't apply interface quirk to Presonus S1824c
Testing with a Presonus STUDIO 1824c together with
a Behringer ultragain digital ADAT device shows that
using all 3 altno settings works fine.
When selecting sample rate, the driver sets the interface
to the correct altno setting and the correct number of
channels is set.
Selecting the correct altno setting via Ardour, Reaper or
whatever other way to set the sample rate is more convenient
than re-loading the driver module with device_setup to
set altno.
Signed-off-by: Roy Vegard Ovesen <roy.vegard.ovesen@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Niranjan H Y [Fri, 12 Sep 2025 08:36:22 +0000 (14:06 +0530)]
ASoc: tas2783A: machine driver amp utility for TI devices
Machine driver amp utility file to initialize and support
multiple tas2783a devices are added.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
--
v5:
- removed empty line in soc_sdw_ti_amp.c Link: https://patch.msgid.link/20250912083624.804-3-niranjan.hy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
Niranjan H Y [Fri, 12 Sep 2025 08:36:21 +0000 (14:06 +0530)]
ASoc: tas2783A: Add soundwire based codec driver
TAS2783 is mono digital input class-D Smart Amplifier
based on MIPI Alliance Soundwire interface. The driver
supports loading the algorithm coefficients for one
or more tas2783 chips.
Niranjan H Y [Fri, 12 Sep 2025 08:36:20 +0000 (14:06 +0530)]
ASoC: ops: improve snd_soc_get_volsw
* clamp the values if the register value read is
out of range
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
[This patch originally had two changes in it, I removed a second buggy
one -- broonie]
--
v5:
- remove clamp parameter
- move the boundary check after sign-bit extension Link: https://patch.msgid.link/20250912083624.804-1-niranjan.hy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
Stefan Binding [Wed, 17 Sep 2025 15:37:12 +0000 (16:37 +0100)]
ASoC: cs35l41: Fallback to reading Subsystem ID property if not ACPI
If ACPI is not used, then there is currently no way of reading a
Subsystem ID property used for a system name to uniquely identify
the system in order to load the correct firmware and tuning.
Add a new property which can be read from device tree to be able to set
the system name.
Stefan Binding [Wed, 17 Sep 2025 15:37:11 +0000 (16:37 +0100)]
ASoC: dt-bindings: cirrus,cs35l41: Document the cirrus,subsystem-id property
Add new property: cirrus,subsystem-id
This new property is used to uniquely identify the system if device
tree is used, to allow the driver to select the correct firmware and
tuning for the system.
The DSP driver searches for a compatible firmware (and tuning) based on
what it is able to read from the hardware.
However, the SSID is based on the system, and cannot be read from the
hardware, therefore it needs to be read from the Device Tree.
On ACPI-based systems, it is able to read this from the ACPI _SUB
property, and to maintain compatibility with the driver between ACPI
and Device Tree systems we need an equivalent property.
ASoC: tas2781: Correct the wrong description and register address on tas2781
Correct the wrong description for TAS257X. Combined TAS5825 with TAS2563,
as they use the same register address and number.
Correct the register address and number for TAS5827.
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Fixes to the Allwinner and Renesas clk drivers:
- Do the math properly in Allwinner's ccu_mp_recalc_rate() so clk
rates aren't bogus
- Fix a clock domain regression on Renesas R-Car M1A, R-Car H1,
and RZ/A1 by registering the domain after the pmdomain bus is
registered instead of before"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: mp: Fix dual-divider clock rate readback
clk: renesas: mstp: Add genpd OF provider at postcore_initcall()
Merge tag 'firewire-fixes-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"When new structures and events were added to UAPI in v6.5 kernel, the
required update to the subsystem ABI version returned to userspace
client was overlooked. The version is now updated"
* tag 'firewire-fixes-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix overlooked update of subsystem ABI version
Merge tag 'asoc-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.18
A relatively quiet release for ASoC, we've had a lot of maintainance
work going on and several new drivers but really the most remarkable
thing is that we removed a driver, the WL1273 driver used in some old
Nokia systems that have had the underlying system support removed from
the kernel.
- Morimoto-san continues his work on cleanups of the core APIs and
enforcement of abstraction layers.
- Lots of cleanups and conversions of DT bindings.
- Substantial maintainance work on the Intel AVS drivers.
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754.
- Remove support for TI WL1273.
firewire: core: fix overlooked update of subsystem ABI version
In kernel v6.5, several functions were added to the cdev layer. This
required updating the default version of subsystem ABI up to 6, but
this requirement was overlooked.
Merge tag '6.17-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Two unlink fixes: one for rename and one for deferred close
- Four smbdirect/RDMA fixes: fix buffer leak in negotiate, two fixes
for races in smbd_destroy, fix offset and length checks in recv_done
* tag '6.17-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path
smb: client: fix file open check in __cifs_unlink()
smb: client: let smbd_destroy() call disable_work_sync(&info->post_send_credits_work)
smb: client: use disable[_delayed]_work_sync in smbdirect.c
smb: client: fix filename matching of deferred files
smb: client: let recv_done verify data_offset, data_length and remaining_data_length
Merge tag 'iommu-fixes-v6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fixes for memory leak and memory corruption bugs on S390 and AMD-Vi
- Race condition fix in AMD-Vi page table code and S390 device attach
code
- Intel VT-d: Fix alignment checks in __domain_mapping()
- AMD-Vi: Fix potentially incorrect DTE settings when device has
aliases
* tag 'iommu-fixes-v6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/amd/pgtbl: Fix possible race while increase page table level
iommu/amd: Fix alias device DTE setting
iommu/s390: Make attach succeed when the device was surprise removed
iommu/vt-d: Fix __domain_mapping()'s usage of switch_to_super_page()
iommu/s390: Fix memory corruption when using identity domain
iommu/amd: Fix ivrs_base memleak in early_amd_iommu_init()
Merge tag 'io_uring-6.17-20250919' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix for a regression introduced in the io-wq worker creation logic.
- Remove the allocation cache for the msg_ring io_kiocb allocations. I
have a suspicion that there's a bug there, and since we just fixed
one in that area, let's just yank the use of that cache entirely.
It's not that important, and it kills some code.
- Treat a closed ring like task exiting in that any requests that
trigger post that condition should just get canceled. Doesn't fix any
real issues, outside of having tasks being able to rely on that
guarantee.
- Fix for a bug in the network zero-copy notification mechanism, where
a comparison for matching tctx/ctx for notifications was buggy in
that it didn't correctly compare with the previous notification.
* tag 'io_uring-6.17-20250919' of git://git.kernel.dk/linux:
io_uring: fix incorrect io_kiocb reference in io_link_skb
io_uring/msg_ring: kill alloc_cache for io_kiocb allocations
io_uring: include dying ring in task_work "should cancel" state
io_uring/io-wq: fix `max_workers` breakage and `nr_workers` underflow
Merge tag 'gpio-fixes-for-v6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an ACPI I2C HID driver breakage due to not initializing a
structure on the stack and passing garbage down to GPIO core
- ignore touchpad wakeup on GPD G1619-05
- fix debouncing configuration when looking up GPIOs in ACPI
* tag 'gpio-fixes-for-v6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: acpi: initialize acpi_gpio_info struct
gpiolib: acpi: Ignore touchpad wakeup on GPD G1619-05
gpiolib: acpi: Program debounce when finding GPIO
Merge tag 'mmc-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- mvsdio: Fix dma_unmap_sg() nents value
- sdhci: Fix clock management for UHS-II
- sdhci-pci-gli: Fix initialization of UHS-II for GL9767
* tag 'mmc-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: GL9767: Fix initializing the UHS-II interface during a power-on
mmc: sdhci-uhs2: Fix calling incorrect sdhci_set_clock() function
mmc: sdhci: Move the code related to setting the clock from sdhci_set_ios_common() into sdhci_set_ios()
mmc: mvsdio: Fix dma_unmap_sg() nents value
Merge tag 'pmdomain-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"pmdomain core:
- Restore behaviour for disabling unused PM domains and introduce the
GENPD_FLAG_NO_STAY_ON configuration bit
Merge tag 'loongarch-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix some build warnings for RUST-enabled objtool check, align ACPI
structures for ARCH_STRICT_ALIGN, fix an unreliable stack for live
patching, add some NULL pointer checkings, and fix some bugs around
KVM"
* tag 'loongarch-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_pch_pic_regs_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_sw_status_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_regs_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_ctrl_access()
LoongArch: KVM: Fix VM migration failure with PTW enabled
LoongArch: KVM: Remove unused returns and semicolons
LoongArch: vDSO: Check kcalloc() result in init_vdso()
LoongArch: Fix unreliable stack for live patching
LoongArch: Replace sprintf() with sysfs_emit()
LoongArch: Check the return value when creating kobj
LoongArch: Align ACPI structures if ARCH_STRICT_ALIGN enabled
LoongArch: Update help info of ARCH_STRICT_ALIGN
LoongArch: Handle jump tables options for RUST
LoongArch: Make LTO case independent in Makefile
objtool/LoongArch: Mark special atomic instruction as INSN_BUG type
objtool/LoongArch: Mark types based on break immediate code
Merge tag 'v6.17-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a NULL pointer dereference in ccp and a couple of bugs in
the af_alg interface"
* tag 'v6.17-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg
crypto: af_alg - Set merge to zero early in af_alg_sendmsg
crypto: ccp - Always pass in an error pointer to __sev_platform_shutdown_locked()
Merge tag 'sound-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. The volume became higher than wished, but
nothing really stands out -- all small, nice and smooth.
A slightly large change is found in qcom USB-audio offload stuff, but
this is a regression fix specific to this device, hence it should be
safe to apply at this late stage.
- Various small fixes for ASoC Cirrus, Realtek, lpass, Intel and
Qualcomm drivers
- ASoC SoundWire fixes
- A few TAS2781 HD-audio side-codec driver fixes
- A fix for Qualcomm USB-audio offload breakage
- Usual a few HD-audio quirks"
* tag 'sound-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda/realtek: Fix mute led for HP Laptop 15-dw4xx
ALSA: hda: intel-dsp-config: Prevent SEGFAULT if ACPI_HANDLE() is NULL
ALSA: usb: qcom: Fix false-positive address space check
ASoC: rt5682s: Adjust SAR ADC button mode to fix noise issue
ASoC: Intel: PTL: Add entry for HDMI-In capture support to non-I2S codec boards.
ASoC: amd: acp: Fix incorrect retrival of acp_chip_info
ASoC: Intel: sof_sdw: use PRODUCT_FAMILY for Fatcat series
ASoC: qcom: sc8280xp: Fix sound card driver name match data for QCS8275
ALSA: hda/realtek: Fix volume control on Lenovo Thinkbook 13x Gen 4
ALSA: hda/realtek: Support Lenovo Thinkbook 13x Gen 5
ALSA: hda: cs35l41: Support Lenovo Thinkbook 13x Gen 5
ALSA: hda/realtek: Add ALC295 Dell TAS2781 I2C fixup
ALSA: hda/tas2781: Fix a potential race condition that causes a NULL pointer in case no efi.get_variable exsits
ASoC: qcom: sc8280xp: Enable DAI format configuration for MI2S interfaces
ASoC: qcom: q6apm-lpass-dais: Fix missing set_fmt DAI op for I2S
ASoC: qcom: audioreach: Fix lpaif_type configuration for the I2S interface
ASoC: Intel: catpt: Expose correct bit depth to userspace
ALSA: hda/tas2781: Fix the order of TAS2781 calibrated-data
ASoC: codecs: lpass-wsa-macro: Fix speaker quality distortion
ASoC: codecs: lpass-rx-macro: Fix playback quality distortion
...
Merge tag 'drm-fixes-2025-09-19' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes for drm, it's a bit busier than I'd like on the xe side
this week, but otherwise amdgpu and some smaller fixes for i915/bridge
and a revert on docs.
docs:
- fix docs build regression
i915:
- Honor VESA eDP backlight luminance control capability
bridge:
- anx7625: Fix NULL pointer dereference with early IRQ
- cdns-mhdp8546: Fix missing mutex unlock on error path
xe:
- Release kobject for the failure path
- SRIOV PF: Drop rounddown_pow_of_two fair
- Remove type casting on hwmon
- Defer free of NVM auxiliary container to device release
- Fix a NULL vs IS_ERR
- Add cleanup action in xe_device_sysfs_init
- Fix error handling if PXP fails to start
- Set GuC RCS/CCS yield policy
amdgpu:
- GC 11.0.1/4 cleaner shader support
- DC irq fix
- OD fix
amdkfd:
- S0ix fix"
* tag 'drm-fixes-2025-09-19' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu: suspend KFD and KGD user queues for S0ix
drm/amdkfd: add proper handling for S0ix
drm/xe/guc: Set RCS/CCS yield policy
drm/xe: Fix error handling if PXP fails to start
drm/xe/sysfs: Add cleanup action in xe_device_sysfs_init
drm/amd: Only restore cached manual clock settings in restore if OD enabled
drm/xe: Fix a NULL vs IS_ERR() in xe_vm_add_compute_exec_queue()
drm: bridge: cdns-mhdp8546: Fix missing mutex unlock on error path
drm/i915/backlight: Honor VESA eDP backlight luminance control capability
drm/amd/display: Allow RX6xxx & RX7700 to invoke amdgpu_irq_get/put
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.0.1/11.0.4 GPUs
drm: bridge: anx7625: Fix NULL pointer dereference with early IRQ
drm/xe: defer free of NVM auxiliary container to device release callback
drm/xe/hwmon: Remove type casting
drm/xe/pf: Drop rounddown_pow_of_two fair LMEM limitation
drm/xe/tile: Release kobject for the failure path
Revert "drm: Add directive to format code in comment"
Richard Fitzgerald [Fri, 19 Sep 2025 14:02:35 +0000 (15:02 +0100)]
ASoC: Intel: sof_sdw: Prevent jump to NULL add_sidecar callback
In create_sdw_dailink() check that sof_end->codec_info->add_sidecar
is not NULL before calling it.
The original code assumed that if include_sidecar is true, the codec
on that link has an add_sidecar callback. But there could be other
codecs on the same link that do not have an add_sidecar callback.
Mark Brown [Fri, 19 Sep 2025 13:27:28 +0000 (14:27 +0100)]
ASoC: codecs: wcd93xxx: remove code duplication
Merge series from Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>:
All the Qualcomm WCD codecs and WCD based codecs have lots of code in
common, resulting in lot of duplicate code.
This series is an attempt to clean some of this by moving the common
code to wcd-common library or to soundwire helper functions.
Currently I have done cleanups for 4 codecs wcd934x, wcd937x, wcd938x
and wcd939x, however any new Qualcomm codecs can avoid this duplication
by using the wcd-common library.
I have also added two helpers of_sdw_find_device_by_node() and
sdw_slave_get_current_bank() in soundwire layer for the codecs to use them,
this series was already acked by Soundwire maintainer Vinod.
As original cleanup series was depending on the new soundwire interfaces
I have combined both the series as they are cleaning up code
duplications.
As am touching the same codec drivers, 2 bug fixes are also added at the
start of the series.
There is still lot of code that is duplicate, but this is just a
starting point for such cleanups.
I have tested this on T14s, any testing is appreciated.
ASoC: qcom: qdsp6/audioreach: add support for offloading raw opus playback
Add support for OPUS module, OPUS format ID, media format payload struct
and make it all recognizable by audioreach compress playback path.
At this moment this only supports raw or plain OPUS packets not
encapsulated in container (for instance OGG container). For this usecase
each OPUS packet needs to be prepended with 4-bytes long length field
which is expected to be done by userspace applications. This is
Qualcomm DSP specific requirement.
ALSA: compress: add raw opus codec define and opus decoder structs
Adds a raw opus codec define and raw opus decoder structs.
This is for raw OPUS packets not packed in any type of container
(for instance OGG container). The decoder struct fields are
taken from corresponding RFC document: RFC 7845 Section 5.
Yang Xiuwei [Fri, 19 Sep 2025 09:03:52 +0000 (17:03 +0800)]
io_uring: fix incorrect io_kiocb reference in io_link_skb
In io_link_skb function, there is a bug where prev_notif is incorrectly
assigned using 'nd' instead of 'prev_nd'. This causes the context
validation check to compare the current notification with itself instead
of comparing it with the previous notification.
Fix by using the correct prev_nd parameter when obtaining prev_notif.
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Fixes: 6fe4220912d19 ("io_uring/notif: implement notification stacking") Signed-off-by: Jens Axboe <axboe@kernel.dk>
iommu/amd/pgtbl: Fix possible race while increase page table level
The AMD IOMMU host page table implementation supports dynamic page table levels
(up to 6 levels), starting with a 3-level configuration that expands based on
IOVA address. The kernel maintains a root pointer and current page table level
to enable proper page table walks in alloc_pte()/fetch_pte() operations.
The IOMMU IOVA allocator initially starts with 32-bit address and onces its
exhuasted it switches to 64-bit address (max address is determined based
on IOMMU and device DMA capability). To support larger IOVA, AMD IOMMU
driver increases page table level.
But in unmap path (iommu_v1_unmap_pages()), fetch_pte() reads
pgtable->[root/mode] without lock. So its possible that in exteme corner case,
when increase_address_space() is updating pgtable->[root/mode], fetch_pte()
reads wrong page table level (pgtable->mode). It does compare the value with
level encoded in page table and returns NULL. This will result is
iommu_unmap ops to fail and upper layer may retry/log WARN_ON.
CPU 0 CPU 1
------ ------
map pages unmap pages
alloc_pte() -> increase_address_space() iommu_v1_unmap_pages() -> fetch_pte()
pgtable->root = pte (new root value)
READ pgtable->[mode/root]
Reads new root, old mode
Updates mode (pgtable->mode += 1)
Since Page table level updates are infrequent and already synchronized with a
spinlock, implement seqcount to enable lock-free read operations on the read path.
Dave Airlie [Fri, 19 Sep 2025 01:19:36 +0000 (11:19 +1000)]
Merge tag 'drm-xe-fixes-2025-09-18' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Release kobject for the failure path (Shuicheng)
- SRIOV PF: Drop rounddown_pow_of_two fair (Michal)
- Remove type casting on hwmon (Mallesh)
- Defer free of NVM auxiliary container to device release (Nitin)
- Fix a NULL vs IS_ERR (Dan)
- Add cleanup action in xe_device_sysfs_init (Zongyao)
- Fix error handling if PXP fails to start (Daniele)
- Set GuC RCS/CCS yield policy (Daniele)
Merge tag 'trace-rv-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier fixes from Steven Rostedt:
- Fix build in some RISC-V flavours
Some system calls only are available for the 64bit RISC-V machines.
#ifdef out the cases of clock_nanosleep and futex in the sleep
monitor if they are not supported by the architecture.
- Fix wrong cast, obsolete after refactoring
Use container_of() to get to the rv_monitor structure from the
enable_monitors_next() 'p' pointer. The assignment worked only
because the list field used happened to be the first field of the
structure.
- Remove redundant include files
Some include files were listed twice. Remove the extra ones and sort
the includes.
- Fix missing unlock on failure
There was an error path that exited the rv_register_monitor()
function without releasing a lock. Change that to goto the lock
release.
- Add Gabriele Monaco to be Runtime Verifier maintainer
Gabriele is doing most of the work on RV as well as collecting
patches. Add him to the maintainers file for Runtime Verification.
* tag 'trace-rv-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Add Gabriele Monaco as maintainer for Runtime Verification
rv: Fix missing mutex unlock in rv_register_monitor()
include/linux/rv.h: remove redundant include file
rv: Fix wrong type cast in enabled_monitors_next()
rv: Support systems with time64-only syscalls
ASoC: fsl: fsl_qmc_audio: Only request completion on last channel
In non-interleaved mode, several QMC channels are used in sync.
More details can be found in commit 188d9cae5438 ("ASoC: fsl:
fsl_qmc_audio: Add support for non-interleaved mode.")
At the time being, an interrupt is requested on each channel to
perform capture/playback completion, allthough the completion is
really performed only once all channels have completed their work.
This leads to a lot more interrupts than really needed. Looking at
/proc/interrupts shows ~3800 interrupts per second when using
4 capture and 4 playback devices with 5ms periods while
only 1600 (200 x 4 + 200 x 4) periods are processed during one second.
The QMC channels work in sync, the one started first is the one
finishing first and the one started last is the one finishing last,
so when the last one finishes it is guaranteed that the other ones are
finished as well. Therefore only request completion processing on the
last QMC channel.
On my board with the above exemple, on a kernel started with
'threadirqs' option, the QMC irq thread uses 16% CPU time with this
patch while it uses 26% CPU time without this patch.
ASoC: fsl: fsl_qmc_audio: Ensure audio channels are ordered in TDM bus
To reduce complexity of interrupt handling in following patch, ensure
audio channels are configured in the same order as timeslots on the
TDM bus. If we need a given ordering of audio sources in the audio
frame, it is possible to re-order codecs on the TDM bus, no need to
mix up timeslots in channels.
Stefan Metzmacher [Thu, 18 Sep 2025 01:06:46 +0000 (03:06 +0200)]
smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path
During tests of another unrelated patch I was able to trigger this
error: Objects remaining on __kmem_cache_shutdown()
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Thu, 18 Sep 2025 15:30:32 +0000 (12:30 -0300)]
smb: client: fix file open check in __cifs_unlink()
Fix the file open check to decide whether or not silly-rename the file
in SMB2+.
Fixes: c5ea3065586d ("smb: client: fix data loss due to broken rename(2)") Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Cc: Frank Sorenson <sorenson@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
ASoC: SOF: ipc3-dtrace: fix potential integer overflow in allocation
Fix a potential integer overflow vulnerability in trace_filter_parse()
where the allocation size calculation could overflow.
The issue occurs when:
1. capacity is calculated by adding TRACE_FILTER_ELEMENTS_PER_ENTRY in a
loop for each entry found in the input string.
2. capacity * sizeof(**out) multiplication could overflow if many
entries are present in the input.
3. This results in a smaller allocation than expected, leading to
potential buffer overflow.
Replace kmalloc() with kmalloc_array() which provides built-in overflow
checking and will safely fail the allocation if overflow would occur,
preventing memory corruption.
ASoC: codecs: wcd-common: move status_update callback to common
Soundwire update_status, bus_config and interrupt callbacks for wcd937x,
wcd938x, wcd939x soundwire codecs are exactly identlical, move them to
common driver to remove this duplicate code.
for some reason we ended up with a boiler plate for dev_get_regmap in
wcd939x codec and started exporting a symbol for this. Remove this
redundant wrapper and direclty get regmap.
ASoC: codecs: wcd-common: move WCD_SDW_CH to common
sdw_ch_info and WCD_SDW_CH macro is duplicated across wcd937x, wcd938x,
wcd939x soundwire codec drivers. Move this to wcd common driver to
remove this code duplication.
ASoC: codecs: wcd: add common helper for wcd codecs
All the Qualcomm WCD codecs have most of its code duplicated across all
these 3/4 drivers. This is an attempt to remove those duplicate
parts by adding a common helper library for these codecs.
To start with move all the micbias parsing and voltage settings these
are identical in WCD934x, WCD937x, WCD938x and WCD939x codec driver.
For some reason we ended up with stub functions that are not inline,
this can result in build error if its included multiple places, as we will
be redefining the same function
projects / users / jedix / linux-maple.git / log