Paul Cercueil [Wed, 1 Nov 2023 20:17:31 +0000 (21:17 +0100)]
drm/exynos: dpi: Change connector type to DPI
When exynos_drm_dpi.c was written, DRM_MODE_CONNECTOR_DPI did not exist
yet and I guess that's the reason why DRM_MODE_CONNECTOR_VGA was used as
the connector type.
However, now it makes more sense to use DRM_MODE_CONNECTOR_DPI as the
connector type.
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Uwe Kleine-König [Wed, 8 Nov 2023 04:09:12 +0000 (13:09 +0900)]
drm/exynos: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
fix merge conflict and drop duplicated patch description. Signed-off-by: Inki Dae <inki.dae@samsung.com>
Douglas Anderson [Thu, 21 Sep 2023 19:26:52 +0000 (12:26 -0700)]
drm/exynos: Call drm_atomic_helper_shutdown() at shutdown/unbind time
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.
A few notes about this fix:
- When adding drm_atomic_helper_shutdown() to the unbind path, I added
it after drm_kms_helper_poll_fini() since that's when other drivers
seemed to have it.
- Technically with a previous patch, ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop"), we don't
actually need to check to see if our "drm" pointer is NULL before
calling drm_atomic_helper_shutdown(). We'll leave the "if" test in,
though, so that this patch can land without any dependencies. It
could potentially be removed later.
- This patch also makes sure to set the drvdata to NULL in the case of
bind errors to make sure that shutdown can't access freed data.
Suggested-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Tue, 12 Dec 2023 04:06:29 +0000 (13:06 +0900)]
Merge tag 'exynos-drm-next-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next
Two fixups
- Fix a potential error pointer dereference by checking the return value
of exynos_drm_crtc_get_by_type() function before accessing to crtc
object.
- Fix a wrong error checking in exynos_drm_dma.c modules, which was reported
by Dan[1]
Dave Airlie [Fri, 8 Dec 2023 06:26:20 +0000 (16:26 +1000)]
Merge tag 'drm-misc-next-2023-12-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.8:
UAPI Changes:
- Remove Userspace Mode-Setting ioctls
- v3d: New uapi to handle jobs involving the CPU
Cross-subsystem Changes:
Core Changes:
- atomic: Add support for FB-less planes which got reverted a bit
later for lack of IGT tests and userspace code, Dump private objects
state in drm_state_dump.
- dma-buf: Add fence deadline support
- encoder: Create per-encoder debugfs directory, move the bridge chain
file to that directory
Driver Changes:
- Include drm_auth.h in driver that use it but don't include it, Drop
drm_plane_helper.h from drivers that include it but don't use it
- imagination: Plenty of small fixes
- panfrost: Improve interrupt handling at poweroff
- qaic: Convert to persistent DRM devices
- tidss: Support for the AM62A7, a few probe improvements, some cleanups
- v3d: Support for jobs involving the CPU
- bridge:
- Create transparent aux-bridge for DP/USB-C
- lt8912b: Add suspend/resume support and power regulator support
- panel:
- himax-hx8394: Drop prepare, unprepare and shutdown logic, Support
panel rotation
- New panels: BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G,
Evervision VGG644804, SDC ATNA45AF01
Dave Airlie [Fri, 8 Dec 2023 05:06:04 +0000 (15:06 +1000)]
Merge tag 'drm-intel-next-2023-12-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Improve display debug msgs and other general clean-ups (Ville, Rahuul)
- PSR fixes and improvements around selective fetch (Jouni, Ville)
- Remove FBC restrictions for Xe2LPD displays (Vinod)
- Skip some timing checks on BXT/GLK DSI transcoders (Ville)
- DP MST Fixes (Ville)
- Correct the input parameter on _intel_dsb_commit (heminhong)
- Fix IP version of the display WAs (Bala)
- DGFX uses direct VBT pin mapping (Clint)
- Proper handling of bool on PIPE_CONF_CHECK macros (Jani)
- Skip state verification with TBT-ALT mod (Mika Kahona)
- General organization of display code for reusage with Xe
(Jouni, Luca, Jani, Maarten)
- Squelch a sparse warning (Jani)
- Don't use "proxy" headers (Andy Shevchenko)
- Use devm_gpiod_get() for all GPIOs (Hans)
- Fix ADL+ tiled plane stride (Ville)
- Use octal permissions in display debugfs (Jani)
Luca Coelho [Fri, 1 Dec 2023 10:00:32 +0000 (12:00 +0200)]
drm/i915: handle uncore spinlock when not available
The uncore code may not always be available (e.g. when we build the
display code with Xe), so we can't always rely on having the uncore's
spinlock.
To handle this, split the spin_lock/unlock_irqsave/restore() into
spin_lock/unlock() followed by a call to local_irq_save/restore() and
create wrapper functions for locking and unlocking the uncore's
spinlock. In these functions, we have a condition check and only
actually try to lock/unlock the spinlock when I915 is defined, and
thus uncore is available.
This keeps the ifdefs contained in these new functions and all such
logic inside the display code.
After reading the code, I think this is what happens:
We have a DSI host defined in the device tree and a DSI peripheral under
that host (i.e. an i2c device using the DSI as data bus doesn't exhibit
this behavior).
The host driver calls mipi_dsi_host_register(), which causes (via a few
functions) mipi_dsi_device_add() to be called for the DSI peripheral. So
now we have a DSI device under the host, but attach hasn't been called.
Normally the probing of the devices continues, and eventually the DSI
peripheral's driver will call mipi_dsi_attach(), attaching the
peripheral.
However, if the host driver's probe encounters an error after calling
mipi_dsi_host_register(), and before the peripheral has called
mipi_dsi_attach(), the host driver will do cleanups and return an error
from its probe function. The cleanups include calling
mipi_dsi_host_unregister().
mipi_dsi_host_unregister() will call two functions for all its DSI
peripheral devices: mipi_dsi_detach() and mipi_dsi_device_unregister().
The latter makes sense, as the device exists, but the former may be
wrong as attach has not necessarily been done.
To fix this, track the attached state of the peripheral, and only detach
from mipi_dsi_host_unregister() if the peripheral was attached.
Note that I have only tested this with a board with an i2c DSI
peripheral, not with a "pure" DSI peripheral.
However, slightly related, the unregister machinery still seems broken.
E.g. if the DSI host driver is unbound, it'll detach and unregister the
DSI peripherals. After that, when the DSI peripheral driver unbound
it'll call detach either directly or using the devm variant, leading to
a crash. And probably the driver will crash if it happens, for some
reason, to try to send a message via the DSI bus.
Tomi Valkeinen [Fri, 3 Nov 2023 13:14:04 +0000 (15:14 +0200)]
drm/framebuffer: Fix use of uninitialized variable
smatch reports:
drivers/gpu/drm/drm_framebuffer.c:654 drm_mode_getfb2_ioctl() error: uninitialized symbol 'ret'.
'ret' is possibly not set when there are no errors, causing the error
above. I can't say if that ever happens in real-life, but in any case I
think it is good to initialize 'ret' to 0.
Tomi Valkeinen [Fri, 3 Nov 2023 13:14:03 +0000 (15:14 +0200)]
drm/drm_file: fix use of uninitialized variable
smatch reports:
drivers/gpu/drm/drm_file.c:967 drm_show_memory_stats() error: uninitialized symbol 'supported_status'.
'supported_status' is only set in one code path. I'm not familiar with
the code to say if that path will always be ran in real life, but
whether that is the case or not, I think it is good to initialize
'supported_status' to 0 to silence the warning (and possibly fix a bug).
Inki Dae [Wed, 1 Nov 2023 09:36:51 +0000 (18:36 +0900)]
drm/exynos: fix a wrong error checking
Fix a wrong error checking in exynos_drm_dma.c module.
In the exynos_drm_register_dma function, both arm_iommu_create_mapping()
and iommu_get_domain_for_dev() functions are expected to return NULL as
an error.
However, the error checking is performed using the statement
if(IS_ERR(mapping)), which doesn't provide a suitable error value.
So check if 'mapping' is NULL, and if it is, return -ENODEV.
Xiang Yang [Sat, 12 Aug 2023 06:27:48 +0000 (14:27 +0800)]
drm/exynos: fix a potential error pointer dereference
Smatch reports the warning below:
drivers/gpu/drm/exynos/exynos_hdmi.c:1864 hdmi_bind()
error: 'crtc' dereferencing possible ERR_PTR()
The return value of exynos_drm_crtc_get_by_type maybe ERR_PTR(-ENODEV),
which can not be used directly. Fix this by checking the return value
before using it.
Signed-off-by: Xiang Yang <xiangyang3@huawei.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Dan Carpenter [Wed, 6 Dec 2023 15:05:15 +0000 (18:05 +0300)]
drm/bridge: nxp-ptn3460: simplify some error checking
The i2c_master_send/recv() functions return negative error codes or
they return "len" on success. So the error handling here can be written
as just normal checks for "if (ret < 0) return ret;". No need to
complicate things.
Btw, in this code the "len" parameter can never be zero, but even if
it were, then I feel like this would still be the best way to write it.
Fixes: 914437992876 ("drm/bridge: nxp-ptn3460: fix i2c_master_send() error checking") Suggested-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/04242630-42d8-4920-8c67-24ac9db6b3c9@moroto.mountain
Donald Robson [Mon, 4 Dec 2023 15:13:37 +0000 (15:13 +0000)]
drm/imagination: Removed unused functions in pvr_fw_trace
Fixing the warning below due to an unused file level vtable. Removing
only this causes additional warnings for the now unused functions, so
I've removed those too.
>> drivers/gpu/drm/imagination/pvr_fw_trace.c:205:37: warning: 'pvr_fw_trace_group_mask_fops' defined but not used [-Wunused-const-variable=]
205 | static const struct file_operations pvr_fw_trace_group_mask_fops = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Changes since v1:
- Corrected hash in Fixes tag.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311302054.MVYPxFCE-lkp@intel.com/ Fixes: cb56cd610866 ("drm/imagination: Add firmware trace to debugfs") Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231204151337.60930-1-donald.robson@imgtec.com
Thomas Zimmermann [Mon, 4 Dec 2023 09:07:53 +0000 (10:07 +0100)]
drm/xlnx: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Thomas Zimmermann [Mon, 4 Dec 2023 09:07:52 +0000 (10:07 +0100)]
drm/simpledrm: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Thomas Zimmermann [Mon, 4 Dec 2023 09:07:51 +0000 (10:07 +0100)]
drm/ofdrm: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Thomas Zimmermann [Mon, 4 Dec 2023 09:07:50 +0000 (10:07 +0100)]
drm/solomon: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Thomas Zimmermann [Mon, 4 Dec 2023 09:07:49 +0000 (10:07 +0100)]
drm/shmobile: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Thomas Zimmermann [Mon, 4 Dec 2023 09:07:48 +0000 (10:07 +0100)]
drm/loongson: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Thomas Zimmermann [Mon, 4 Dec 2023 09:07:47 +0000 (10:07 +0100)]
drm/amdgpu: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Thomas Zimmermann [Wed, 22 Nov 2023 12:09:42 +0000 (13:09 +0100)]
char/agp: Remove frontend code
The AGP subsystem supports a user-space interface via /dev/agpgart. It
is only enabled with DRM support for mode setting in user space. (i.e.,
CONFIG_DRM_LEGACY). All of that DRM code has been removed and the option
will go away. Hence remove the AGP frontend.
Modern DRM drivers with kernel mode setting handle AGP support internally.
Thomas Zimmermann [Wed, 22 Nov 2023 12:09:40 +0000 (13:09 +0100)]
drm: Remove locking for legacy ioctls and DRM_UNLOCKED
Modern DRM drivers acquire ioctl locks by themselves. Legacy ioctls
for user-space mode setting used to acquire drm_global_mutex. After
removing the ioctl entry points, also remove the locking code. The only
legacy ioctl without global locking was VBLANK_WAIT, which has been
removed as well. Hence remove the related DRM_UNLOCKED flag.
Thomas Zimmermann [Wed, 22 Nov 2023 12:09:39 +0000 (13:09 +0100)]
drm: Remove support for legacy drivers
Remove all hooks and calls into code for user-space mode setting from
the DRM core. Without the drivers and ioctl entry points, none of this
is required any longer.
Thomas Zimmermann [Wed, 22 Nov 2023 12:09:38 +0000 (13:09 +0100)]
drm: Remove the legacy DRM_IOCTL_MODESET_CTL ioctl
DRM drivers with user-space mode setting have been removed in Linux
v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking
any of the ioctl ops will unconditionally return -EINVAL to user space.
Invoking DRM_IOCTL_MODESET_CTL is different from the other legacy
ioctl ops as it returns 0 even without CONFIG_DRM_LEGACY set. From the
original commit 29935554b384 ("drm: Disallow DRM_IOCTL_MODESET_CTL for
KMS drivers") it is not apparent how or why the operation differs from
the others. It is likely just an oversight in commit 61ae227032e7
("drm: allow removal of legacy codepaths (v4.1)"), which allowed
disabling leagacy ioctls in the first place. Still keep this removal
separate from the other ioctls to allow an easy revert, if necessary.
Thomas Zimmermann [Wed, 22 Nov 2023 12:09:37 +0000 (13:09 +0100)]
drm: Remove entry points for legacy ioctls
DRM drivers with user-space mode setting have been removed in Linux
v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking
any of the ioctl ops will unconditionally return -EINVAL to user space.
This has already been the behavior for kernels without CONFIG_DRM_LEGACY
set.
Ville Syrjälä [Mon, 4 Dec 2023 20:24:43 +0000 (22:24 +0200)]
drm/i915: Fix ADL+ tiled plane stride when the POT stride is smaller than the original
plane_view_scanout_stride() currently assumes that we had to pad the
mapping stride with dummy pages in order to align it. But that is not
the case if the original fb stride exceeds the aligned stride used
to populate the remapped view, which is calculated from the user
specified framebuffer width rather than the user specified framebuffer
stride.
Ignore the original fb stride in this case and just stick to the POT
aligned stride. Getting this wrong will cause the plane to fetch the
wrong data, and can lead to fault errors if the page tables at the
bogus location aren't even populated.
TODO: figure out if this is OK for CCS, or if we should instead increase
the width of the view to cover the entire user specified fb stride
instead...
Dmitry Baryshkov [Sun, 3 Dec 2023 00:05:28 +0000 (03:05 +0300)]
drm/atomic: add private obj state to state dump
The drm_atomic_print_new_state() already prints private object state via
drm_atomic_private_obj_print_state(). Add private object state dumping
to __drm_state_dump(), so that it is also included into drm_state_dump()
output and into debugfs/dri/N/state file.
Boris Brezillon [Mon, 4 Dec 2023 15:14:06 +0000 (16:14 +0100)]
drm/gpuvm: Let drm_gpuvm_bo_put() report when the vm_bo object is destroyed
Some users need to release resources attached to the vm_bo object when
it's destroyed. In Panthor's case, we need to release the pin ref so
BO pages can be returned to the system when all GPU mappings are gone.
This could be done through a custom drm_gpuvm::vm_bo_free() hook, but
this has all sort of locking implications that would force us to expose
a drm_gem_shmem_unpin_locked() helper, not to mention the fact that
having a ::vm_bo_free() implementation without a ::vm_bo_alloc() one
seems odd. So let's keep things simple, and extend drm_gpuvm_bo_put()
to report when the object is destroyed.
AngeloGioacchino Del Regno [Mon, 4 Dec 2023 11:42:15 +0000 (12:42 +0100)]
drm/panfrost: Synchronize and disable interrupts before powering off
To make sure that we don't unintentionally perform any unclocked and/or
unpowered R/W operation on GPU registers, before turning off clocks and
regulators we must make sure that no GPU, JOB or MMU ISR execution is
pending: doing that requires to add a mechanism to synchronize the
interrupts on suspend.
Add functions panfrost_{gpu,job,mmu}_suspend_irq() which will perform
interrupts masking and ISR execution synchronization, and then call
those in the panfrost_device_runtime_suspend() handler in the exact
sequence of job (may require mmu!) -> mmu -> gpu.
As a side note, JOB and MMU suspend_irq functions needed some special
treatment: as their interrupt handlers will unmask interrupts, it was
necessary to add an `is_suspended` bitmap which is used to address the
possible corner case of unintentional IRQ unmasking because of ISR
execution after a call to synchronize_irq().
At resume, clear each is_suspended bit in the reset path of JOB/MMU
to allow unmasking the interrupts.
AngeloGioacchino Del Regno [Mon, 4 Dec 2023 11:42:14 +0000 (12:42 +0100)]
drm/panfrost: Add gpu_irq, mmu_irq to struct panfrost_device
In preparation for adding a IRQ synchronization mechanism for PM suspend,
add gpu_irq and mmu_irq variables to struct panfrost_device and change
functions panfrost_gpu_init() and panfrost_mmu_init() to use those.
AngeloGioacchino Del Regno [Mon, 4 Dec 2023 11:42:13 +0000 (12:42 +0100)]
drm/panfrost: Ignore core_mask for poweroff and disable PWRTRANS irq
Some SoCs may be equipped with a GPU containing two core groups
and this is exactly the case of Samsung's Exynos 5422 featuring
an ARM Mali-T628 MP6 GPU: the support for this GPU in Panfrost
is partial, as this driver currently supports using only one
core group and that's reflected on all parts of it, including
the power on (and power off, previously to this patch) function.
The issue with this is that even though executing the soft reset
operation should power off all cores unconditionally, on at least
one platform we're seeing a crash that seems to be happening due
to an interrupt firing which may be because we are calling power
transition only on the first core group, leaving the second one
unchanged, or because ISR execution was pending before entering
the panfrost_gpu_power_off() function and executed after powering
off the GPU cores, or all of the above.
Finally, solve this by:
- Avoid to enable the power transition interrupt on reset; and
- Ignoring the core_mask and ask the GPU to poweroff both core groups
Fixes: 22aa1a209018 ("drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()") Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-2-angelogioacchino.delregno@collabora.com
Timings taken from the datasheet, although sometimes there are just
typical values and it's not clear if they are no min and max values or
if you must use the typical value exactly. To make things worse, there
is no back porch but only a combined sync and back porch length.
Unfortunately, there is not public datasheet. Therefore, here are the
relevant timings:
| min | typ | max |
-----------------+-----+--------+-----+
CLK frequency | - | 25.175 | - |
HS period | - | 800 | - |
HS pulse width | 5 | 30 | - |
HS-DEN time | 112 | 144 | 175 |
DEN pulse width | - | 640 | - |
VS pulse width | 1 | 3 | 5 |
VS-DEN time | - | 35 | - |
VS period | - | 525 | - |
Marco Felsch [Thu, 23 Nov 2023 17:08:04 +0000 (18:08 +0100)]
drm/panel: ilitek-ili9881c: make use of prepare_prev_first
The panel.prepare() call requires an initialized MIPI-DSI host, so set
the prepare_prev_first flag to indicate that the host must be
initialized first.
Chris Morgan [Mon, 4 Dec 2023 18:57:15 +0000 (12:57 -0600)]
drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
Add support for the Powkiddy X55 panel as used on the Powkiddy X55
handheld gaming console. This panel uses a Himax HX8394 display
controller and requires a vendor provided init sequence. The display
resolution is 720x1280 and is 67mm by 121mm as measured with calipers.
Dave Airlie [Tue, 5 Dec 2023 02:19:21 +0000 (12:19 +1000)]
Merge tag 'drm-intel-fixes-2023-12-01-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v6.7-rc4 #2:
- d21a3962d304 ("drm/i915: Call intel_pre_plane_updates() also for pipes
getting enabled") in the previous fixes pull depends on a change that
wasn't included. Pick it up.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Dmitry Baryshkov [Sun, 3 Dec 2023 11:53:14 +0000 (14:53 +0300)]
drm/bridge: migrate bridge_chains to per-encoder file
Instead of having a single file with all bridge chains, list bridges
under a corresponding per-encoder debugfs directory.
While we are at it, also slightly improve the formatting of the bridge
data: split a single line entry into multiple lines, include the symbol
name of the bridge funcs and add the textual representation of the
bridge ops.
Dmitry Baryshkov [Sun, 3 Dec 2023 11:53:13 +0000 (14:53 +0300)]
drm/encoder: register per-encoder debugfs dir
Each of connectors and CRTCs used by the DRM device provides debugfs
directory, which is used by several standard debugfs files and can
further be extended by the driver. Add such generic debugfs directories
for encoder.
Dmitry Baryshkov [Sun, 3 Dec 2023 11:43:31 +0000 (14:43 +0300)]
drm/bridge: implement generic DP HPD bridge
Several USB-C controllers implement a pretty simple DRM bridge which
implements just the HPD notification operations. Add special helper
for creating such simple bridges.
Dmitry Baryshkov [Sun, 3 Dec 2023 11:43:28 +0000 (14:43 +0300)]
drm/bridge: add transparent bridge helper
Define a helper for creating simple transparent bridges which serve the
only purpose of linking devices into the bridge chain up to the last
bridge representing the connector. This is especially useful for
DP/USB-C bridge chains, which can span across several devices, but do
not require any additional functionality from the intermediate bridges.
The i2c_master_send/recv() functions return negative error codes or the
number of bytes that were able to be sent/received. This code has
two problems. 1) Instead of checking if all the bytes were sent or
received, it checks that at least one byte was sent or received.
2) If there was a partial send/receive then we should return a negative
error code but this code returns success.
Stefan Eichenberger [Wed, 15 Nov 2023 12:13:38 +0000 (13:13 +0100)]
drm/bridge: lt8912b: Add power supplies
Add supplies to the driver that can be used to turn the Lontium lt8912b
on and off. It can have up to 7 independent supplies, we add them all
and enable/disable them with bulk_enable/disable.
Khaled Almahallawy [Thu, 30 Nov 2023 23:15:10 +0000 (15:15 -0800)]
drm/display/dp: Add the remaining Square PHY patterns DPCD register definitions
DP2.1 Specs added new DPCDs definitions for square pattern configs[1]
These new definitions are used for UHBR Source Transmitter
Equalizations tests[2]. Add the 3 new values for square pattern.
heminhong [Fri, 10 Nov 2023 05:50:31 +0000 (13:50 +0800)]
drm/qxl: remove unused declaration
Some functions are never used by the driver,
removing the functions declaration, it can be reducing program size,
and improving code readability and maintainability.
Dmitry Baryshkov [Sat, 2 Dec 2023 22:55:52 +0000 (01:55 +0300)]
drm/drv: propagate errors from drm_modeset_register_all()
In case the drm_modeset_register_all() function fails, its error code
will be ignored. Instead make the drm_dev_register() bail out in case of
such an error.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311242159.hh8MWiAm-lkp@intel.com/ Fixes: ff5f643de0bf ("drm/imagination: Add GEM and VM related code") Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-5-donald.robson@imgtec.com
Donald Robson [Thu, 30 Nov 2023 16:00:16 +0000 (16:00 +0000)]
drm/imagination: pvr_gpuvm_free() now static
The function below is used only within this source file, but is not static.
drivers/gpu/drm/imagination/pvr_vm.c:542:6: error: no previous prototype for 'pvr_gpuvm_free' [-Werror=missing-prototypes]
542 | void pvr_gpuvm_free(struct drm_gpuvm *gpuvm)
Make it static.
Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311242159.hh8MWiAm-lkp@intel.com/ Fixes: ff5f643de0bf ("drm/imagination: Add GEM and VM related code") Signed-off-by: Donald Robson <donald.robson@imgtec.com> Link: https://lore.kernel.org/r/20231130160017.259902-4-donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
Donald Robson [Thu, 30 Nov 2023 16:00:15 +0000 (16:00 +0000)]
drm/imagination: pvr_device_process_active_queues now static
The function below is used only within this source file, but is not static.
>> drivers/gpu/drm/imagination/pvr_device.c:129:6: warning: no previous prototype for function 'pvr_device_process_active_queues' [-Wmissing-prototypes]
129 | void pvr_device_process_active_queues(struct pvr_device *pvr_dev)
| ^
drivers/gpu/drm/imagination/pvr_device.c:129:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
129 | void pvr_device_process_active_queues(struct pvr_device *pvr_dev)
| ^
| static
1 warning generated.
Make it static.
Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311250632.giVEx7MU-lkp@intel.com/ Fixes: eaf01ee5ba28 ("drm/imagination: Implement job submission and scheduling") Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-3-donald.robson@imgtec.com
Donald Robson [Thu, 30 Nov 2023 16:00:14 +0000 (16:00 +0000)]
drm/imagination: Fixed missing header in pvr_fw_meta
A missing header causes the compiler to warn that the function below is not
forward declared.
>> drivers/gpu/drm/imagination/pvr_fw_meta.c:33:1: warning: no previous prototype for function 'pvr_meta_cr_read32' [-Wmissing-prototypes]
33 | pvr_meta_cr_read32(struct pvr_device *pvr_dev, u32 reg_addr, u32 *reg_value_out)
| ^
drivers/gpu/drm/imagination/pvr_fw_meta.c:32:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
32 | int
| ^
| static
1 warning generated.
Include the correct header.
Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311250226.Da2yiSKp-lkp@intel.com/ Fixes: cc1aeedb98ad ("drm/imagination: Implement firmware infrastructure and META FW support") Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-2-donald.robson@imgtec.com