mini_Qdisc_pair::p_miniq is a double pointer to mini_Qdisc, initialized
in ingress_init() to point to net_device::miniq_ingress. ingress Qdiscs
access this per-net_device pointer in mini_qdisc_pair_swap(). Similar
for clsact Qdiscs and miniq_egress.
Unfortunately, after introducing RTNL-unlocked RTM_{NEW,DEL,GET}TFILTER
requests (thanks Hillf Danton for the hint), when replacing ingress or
clsact Qdiscs, for example, the old Qdisc ("@old") could access the same
miniq_{in,e}gress pointer(s) concurrently with the new Qdisc ("@new"),
causing race conditions [1] including a use-after-free bug in
mini_qdisc_pair_swap() reported by syzbot:
@old and @new should not affect each other. In other words, @old should
never modify miniq_{in,e}gress after @new, and @new should not update
@old's RCU state.
Fixing without changing sch_api.c turned out to be difficult (please
refer to Closes: for discussions). Instead, make sure @new's first call
always happen after @old's last call (in {ingress,clsact}_destroy()) has
finished:
In qdisc_graft(), return -EBUSY if @old has any ongoing filter requests,
and call qdisc_destroy() for @old before grafting @new.
Introduce qdisc_refcount_dec_if_one() as the counterpart of
qdisc_refcount_inc_nz() used for filter requests. Introduce a
non-static version of qdisc_destroy() that does a TCQ_F_BUILTIN check,
just like qdisc_put() etc.
Depends on patch "net/sched: Refactor qdisc_graft() for ingress and
clsact Qdiscs".
[1] To illustrate, the syzkaller reproducer adds ingress Qdiscs under
TC_H_ROOT (no longer possible after commit c7cfbd115001 ("net/sched:
sch_ingress: Only create under TC_H_INGRESS")) on eth0 that has 8
transmission queues:
Thread 1 creates ingress Qdisc A (containing mini Qdisc a1 and a2),
then adds a flower filter X to A.
Thread 2 creates another ingress Qdisc B (containing mini Qdisc b1 and
b2) to replace A, then adds a flower filter Y to B.
Here, B calls mini_qdisc_pair_swap(), pointing eth0->miniq_ingress to
its mini Qdisc, b1. Then, A calls mini_qdisc_pair_swap() again during
ingress_destroy(), setting eth0->miniq_ingress to NULL, so ingress
packets on eth0 will not find filter Y in sch_handle_ingress().
This is just one of the possible consequences of concurrently accessing
miniq_{in,e}gress pointers.
Fixes: 7a096d579e8e ("net: sched: ingress: set 'unlocked' flag for Qdisc ops") Fixes: 87f373921c4e ("net: sched: ingress: set 'unlocked' flag for clsact Qdisc ops") Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/ Cc: Hillf Danton <hdanton@sina.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We will report extack message if there is an error via netlink_ack(). But
if the rule is not to be exclusively executed by the hardware, extack is not
passed along and offloading failures don't get logged.
In commit 81c7288b170a ("sched: cls: enable verbose logging") Marcelo
made cls could log verbose info for offloading failures, which helps
improving Open vSwitch debuggability when using flower offloading.
It would also be helpful if userspace monitor tools, like "tc monitor",
could log this kind of message, as it doesn't require vswitchd log level
adjusment. Let's add a new tc attributes to report the extack message so
the monitor program could receive the failures. e.g.
# tc monitor
added chain dev enp3s0f1np1 parent ffff: chain 0
added filter dev enp3s0f1np1 ingress protocol all pref 49152 flower chain 0 handle 0x1
ct_state +trk+new
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1
Warning: mlx5_core: matching on ct_state +new isn't supported.
In this patch I only report the extack message on add/del operations.
It doesn't look like we need to report the extack message on get/dump
operations.
Note this message not only reporte to multicast groups, it could also
be reported unicast, which may affect the current usersapce tool's behaivor.
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20230113034353.2766735-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 84ad0af0bccd ("net/sched: qdisc_destroy() old ingress and clsact Qdiscs before grafting") Signed-off-by: Sasha Levin <sashal@kernel.org>
Setting very small value of db like 10ms introduces rounding errors when
converting to/from jiffies on some kernel configs. For example, on 250hz
the actual value will be set to 12ms which causes the test to fail:
# $ sudo ./tdc.py -d eth2 -e 3410
# -- ns/SubPlugin.__init__
# Test 3410: Create SFB with db setting
#
# All test results:
#
# 1..1
# not ok 1 3410 - Create SFB with db setting
# Could not match regex pattern. Verify command output:
# qdisc sfb 1: root refcnt 2 rehash 600s db 12ms limit 1000p max 25p target 20p increment 0.000503548 decrement 4.57771e-05 penalty_rate 10pps penalty_burst 20p
Set the value to 100ms instead which currently seem to work on 100hz,
250hz, 300hz and 1000hz kernel configs.
Fixes: 6ad92dc56fca ("selftests/tc-testing: add selftests for sfb qdisc") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Pointer nv_encoder could be dereferenced at nouveau_connector.c
in case it's equal to NULL by jumping to goto label.
This patch adds a NULL-check to avoid it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 3195c5f9784a ("drm/nouveau: set encoder for lvds") Signed-off-by: Natalia Petrova <n.petrova@fintech.ru> Reviewed-by: Lyude Paul <lyude@redhat.com>
[Fixed patch title] Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512103320.82234-1-n.petrova@fintech.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
Add checking for NULL before calling nouveau_connector_detect_depth() in
nouveau_connector_get_modes() function because nv_connector->native_mode
could be dereferenced there since connector pointer passed to
nouveau_connector_detect_depth() and the same value of
nv_connector->native_mode is used there.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d4c2c99bdc83 ("drm/nouveau/dp: remove broken display depth function, use the improved one") Signed-off-by: Natalia Petrova <n.petrova@fintech.ru> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512111526.82408-1-n.petrova@fintech.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: cea86c5bb442 ("drm/bridge: ti-sn65dsi86: Implement the pwm_chip") Signed-off-by: Su Hui <suhui@nfschina.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230608012443.839372-1-suhui@nfschina.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The call site of nouveau_dsm_pci_probe() uses single set of output
variables for all invocations. So, we must not write anything to them
unless it's an NVIDIA device. Otherwise, if we are called with another
device after the NVIDIA device, we'll clober the result of the NVIDIA
device.
For example, if the other device doesn't have _PR3 resources, the
detection later would miss the presence of power resource support, and
the rest of the code will keep using Optimus DSM, breaking power
management for that machine.
Also, because we're detecting NVIDIA's DSM, it doesn't make sense to run
this detection on a non-NVIDIA device anyway. Thus, check at the
beginning of the detection code if this is an NVIDIA card, and just
return if it isn't.
This, together with commit d22915d22ded ("drm/nouveau/devinit/tu102-:
wait for GFW_BOOT_PROGRESS == COMPLETED") developed independently and
landed earlier, fixes runtime power management of the NVIDIA card in
Lenovo Legion 5-15ARH05. Without this patch, the GPU resumption code
will "timeout", sometimes hanging userspace.
As a bonus, we'll also stop preventing _PR3 usage from the bridge for
unrelated devices, which is always nice, I guess.
Q-USGMII is a derivative of USGMII, that uses a specific formatting for
the control word. The layout is close to the USXGMII control word, but
doesn't support speeds over 1Gbps. Use a dedicated decoding logic for
the USGMII control word, re-using USXGMII definitions but only considering
10/100/1000Mbps speeds
Fixes: 5e61fe157a27 ("net: phy: Introduce QUSGMII PHY mode") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Q-USGMII is the quad port version of USGMII, and supports a max speed of
1Gbps on each line. Make so that phylink_interface_max_speed() reports
this information correctly.
Fixes: ae0e4bb2a0e0 ("net: phylink: Adjust link settings based on rate matching") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Guarantee that when probe() is run again, PTM and PCI busmaster will be
in the same state as it was if the driver was never loaded.
Avoid an i225/i226 hardware issue that PTM requests can be made even
though PCI bus mastering is not enabled. These unexpected PTM requests
can crash some systems.
So, "force" disable PTM and busmastering before removing the driver,
so they can be re-enabled in the right order during probe(). This is
more like a workaround and should be applicable for i225 and i226, in
any platform.
Fixes: 1b5d73fb8624 ("igc: Enable PCIe PTM") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There could be a race condition during link down where interrupt
being generated and igc_clean_tx_irq() been called to perform the
TX completion. Properly clear the TX buffer/descriptor ring and
disable the TX Queue ring in igc_free_tx_resources() to avoid that.
Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The sctp_sf_eat_auth() function is supposed to enum sctp_disposition
values and returning a kernel error code will cause issues in the
caller. Change -ENOMEM to SCTP_DISPOSITION_NOMEM.
Fixes: 65b07e5d0d09 ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit 59a0b022aa24 ("ipvlan: Make skb->skb_iif track skb->dev for l3s
mode") fixed ipvlan bonded dev checking by updating skb skb_iif. This fix
works for IPv4, as in raw_v4_input() the dif is from inet_iif(skb), which
is skb->skb_iif when there is no route.
But for IPv6, the fix is not enough, because in ipv6_raw_deliver() ->
raw_v6_match(), the dif is inet6_iif(skb), which is returns IP6CB(skb)->iif
instead of skb->skb_iif if it's not a l3_slave. To fix the IPv6 part
issue. Let's set IP6CB(skb)->iif to correct ifindex.
BTW, ipvlan handles NS/NA specifically. Since it works fine, I will not
reset IP6CB(skb)->iif when addr->atype is IPVL_ICMPV6.
Fixes: c675e06a98a4 ("ipvlan: decouple l3s mode dependencies from other modes") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2196710 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When compiling YNL generated code compiler complains about
array-initializer-out-of-bounds. Turns out the MAX value
for STATS_GRP uses the value for STATS.
This may lead to random corruptions in user space (kernel
itself doesn't use this value as it never parses stats).
Fixes: f09ea6fb1272 ("ethtool: add a new command for reading standard stats") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ib_isert module is releasing the isert connection both in
isert_wait_conn() handler as well as isert_free_conn() handler.
In isert_wait_conn() handler, it is expected to wait for iSCSI
session logout operation to complete. It should free the isert
connection only in isert_free_conn() handler.
When a bunch of iSER target is cleared, this issue can lead to
use-after-free memory issue as isert conn is twice released
When ib_isert module receives connection error event, it is
releasing the isert session and removes corresponding list
node but it doesn't take appropriate mutex lock to remove
the list node. This can lead to linked list corruption
- When a iSER session is released, ib_isert module is taking a mutex
lock and releasing all pending connections. As part of this, ib_isert
is destroying rdma cm_id. To destroy cm_id, rdma_cm module is sending
CM events to CMA handler of ib_isert. This handler is taking same
mutex lock. Hence it leads to deadlock between ib_isert & rdma_cm
modules.
- For fix, created local list of pending connections and release the
connection outside of mutex lock.
The cited commit aimed to ensure that Virtual Functions (VFs) assign a
queue affinity to a Queue Pair (QP) to distribute traffic when
the LAG master creates a hardware LAG. If the affinity was set while
the hardware was not in LAG, the firmware would ignore the affinity value.
However, this commit unintentionally assigned an affinity to QPs on the LAG
master's VPORT even if the RDMA device was not marked as LAG-enabled.
In most cases, this was not an issue because when the hardware entered
hardware LAG configuration, the RDMA device of the LAG master would be
destroyed and a new one would be created, marked as LAG-enabled.
The problem arises when a user configures Equal-Cost Multipath (ECMP).
In ECMP mode, traffic can be directed to different physical ports based on
the queue affinity, which is intended for use by VPORTS other than the
E-Switch manager. ECMP mode is supported only if both E-Switch managers are
in switchdev mode and the appropriate route is configured via IP. In this
configuration, the RDMA device is not destroyed, and we retain the RDMA
device that is not marked as LAG-enabled.
To ensure correct behavior, Send Queues (SQs) opened by the E-Switch
manager through verbs should be assigned strict affinity. This means they
will only be able to communicate through the native physical port
associated with the E-Switch manager. This will prevent the firmware from
assigning affinity and will not allow the SQs to be remapped in case of
failover.
Set static rate to 0 as it should be discovered by path query and
has no meaning for RoCE.
This also avoid of using the rtnl lock and ethtool API, which is
a bottleneck when try to setup many rdma-cm connections at the same
time, especially with multiple processes.
A misbehaved user can create a steering anchor that points to a kernel
flow table and then destroy the anchor without freeing the associated
STC. This creates a problem as the kernel can't destroy the flow
table since there is still a reference to it. As a result, this can
exhaust all available flow table resources, preventing other users from
using the RDMA device.
To prevent this problem, a solution is implemented where a special flow
table with two steering rules is created when a user creates a steering
anchor for the first time. The rules include one that drops all traffic
and another that points to the kernel flow table. If the steering anchor
is destroyed, only the rule pointing to the kernel's flow table is removed.
Any traffic reaching the special flow table after that is dropped.
Since the special flow table is not destroyed when the steering anchor is
destroyed, any issues are prevented from occurring. The remaining resources
are only destroyed when the RDMA device is destroyed, which happens after
all DEVX objects are freed, including the STCs, thus mitigating the issue.
Delay drop data is initiated for PFs that have the capability of
rq_delay_drop and are in roce profile.
However, PFs with RAW ethernet profile do not initiate delay drop data
on function load, causing kernel panic if delay drop struct members are
accessed later on in case a dropless RQ is created.
Thus, stage the delay drop initialization as part of RAW ethernet
PF loading process.
Fix LBK link credits on CN10K to be same as CN9K i.e
16 * MAX_LBK_DATA_RATE instead of current scheme of
calculation based on LBK buf length / FIFO size.
Fixes: 6e54e1c5399a ("octeontx2-af: cn10K: Add MTU configuration") Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
txschq_alloc response have two different arrays to store continuous
and non-continuous schedulers of each level. Requested count should
be checked for each array separately.
Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology") Signed-off-by: Satha Rao <skoteshwar@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Enable more than 32 IRQs by removing the u32 bit mask in
iavf_irq_enable_queues(). There is no need for the mask as there are no
callers that select individual IRQs through the bitmask. Also, if the PF
allocates more than 32 IRQs, this mask will prevent us from using all of
them.
Modify the comment in iavf_register.h to show that the maximum number
allowed for the IRQ index is 63 as per the iAVF standard 1.0 [1].
link: [1] https://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ethernet-adaptive-virtual-function-hardware-spec.pdf Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230608200226.451861-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
ieee80211_vif_set_links requires the sdata->local->mtx lock to be held.
Add the appropriate locking around the calls in both the link add and
remove handlers.
This causes a warning when e.g. ieee80211_link_release_channel is called
via ieee80211_link_stop from ieee80211_vif_update_links.
The wrapper function was incorrectly calling the add handler instead of
the del handler. This had no negative side effect as the default
handlers are essentially identical.
In the normal MLME code we always call
ieee80211_mgd_set_link_qos_params() before
ieee80211_link_info_change_notify() and some drivers,
notably iwlwifi, rely on that as they don't do anything
(but store the data) in their conf_tx.
Fix the order here to be the same as in the normal code
paths, so this isn't broken.
In the event of a failure in tcf_change_indev(), u32_set_parms() will
immediately return without decrementing the recently incremented
reference counter. If this happens enough times, the counter will
rollover and the reference freed, leading to a double free which can be
used to do 'bad things'.
In order to prevent this, move the point of possible failure above the
point where the reference counter is incremented. Also save any
meaningful return values to be applied to the return data at the
appropriate point in time.
This issue was caught with KASAN.
Fixes: 705c7091262d ("net: sched: cls_u32: no need to call tcf_exts_change for newly allocated struct") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Lee Jones <lee@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
CN10KB silicon introduced a new exact match feature,
which is used for DMAC filtering. The state of installed
DMAC filters in this exact match table is getting corrupted
when promiscuous mode is toggled. Fix this by not touching
Exact match related config when promiscuous mode is toggled.
Fixes: 2dba9459d2c9 ("octeontx2-af: Wrapper functions for MAC addr add/del/update/reset") Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Instead of relying on skb->transport_header being set correctly, opt
instead to parse the L3 header length out of the L3 headers for both
IPv4/IPv6 when the Extended Layer Op for tcp/udp is used. This fixes a
bug if GRO is disabled, when GRO is disabled skb->transport_header is
set by __netif_receive_skb_core() to point to the L3 header, it's later
fixed by the upper protocol layers, but act_pedit will receive the SKB
before the fixups are completed. The existing behavior causes the
following to edit the L3 header if GRO is disabled instead of the UDP
header:
tc filter add dev eth0 ingress protocol ip flower ip_proto udp \
dst_ip 192.168.1.3 action pedit ex munge udp set dport 18053
Also re-introduce a rate-limited warning if we were unable to extract
the header offset when using the 'ex' interface.
Fixes: 71d0ed7079df ("net/act_pedit: Support using offset relative to
the conventional network headers") Signed-off-by: Max Tottenham <mtottenh@akamai.com> Reviewed-by: Josh Hunt <johunt@akamai.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202305261541.N165u9TZ-lkp@intel.com/ Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The netlink parsing already validates the key 'htype'.
Remove the datapath check as it's redundant.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 6c02568fd1ae ("net/sched: act_pedit: Parse L3 Header for L4 offset") Signed-off-by: Sasha Levin <sashal@kernel.org>
82580/i354/i350 features circle-counter-like timestamp registers
that are different with newer i210. The EXTTS capture value in
AUXTSMPx should be converted from raw circle counter value to
timestamp value in resolution of 1 nanosec by the driver.
This issue can be reproduced on i350 nics, connecting an 1PPS
signal to a SDP pin, and run 'ts2phc' command to read external
1PPS timestamp value. On i210 this works fine, but on i350 the
extts is not correctly converted.
The i350/i354/82580's SYSTIM and other timestamp registers are
40bit counters, presenting time range of 2^40 ns, that means these
registers overflows every about 1099s. This causes all these regs
can't be used directly in contrast to the newer i210/i211s.
The igb driver needs to convert these raw register values to
valid time stamp format by using kernel timecounter apis for i350s
families. Here the igb_extts() just forgot to do the convert.
Fixes: 38970eac41db ("igb: support EXTTS on 82580/i354/i350") Signed-off-by: Yuezhen Luan <eggcar.luan@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230607164116.3768175-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ping sockets can't send packets when they're bound to a VRF master
device and the output interface is set to a slave device.
For example, when net.ipv4.ping_group_range is properly set, so that
ping6 can use ping sockets, the following kind of commands fails:
$ ip vrf exec red ping6 fe80::854:e7ff:fe88:4bf1%eth1
What happens is that sk->sk_bound_dev_if is set to the VRF master
device, but 'oif' is set to the real output device. Since both are set
but different, ping_v6_sendmsg() sees their value as inconsistent and
fails.
Fix this by allowing 'oif' to be a slave device of ->sk_bound_dev_if.
This fixes the following kselftest failure:
$ ./fcnal-test.sh -t ipv6_ping
[...]
TEST: ping out, vrf device+address bind - ns-B IPv6 LLA [FAIL]
For ENETC hardware, the TCs are numbered from 0 to N-1, where N
is the number of TCs. Numerically higher TC has higher priority.
It's obvious that the highest priority TC index should be N-1 and
the 2nd highest priority TC index should be N-2.
However, the previous logic uses netdev_get_prio_tc_map() to get
the indexes of highest priority and 2nd highest priority TCs, it
does not make sense and is incorrect to give a "tc" argument to
netdev_get_prio_tc_map(). So the driver may get the wrong indexes
of the two highest priotiry TCs which would lead to failed to set
the CBS for the two highest priotiry TCs.
In this example, the previous logic deems the indexes of the two
highest priotiry TCs should be 3 and 2. Actually, the indexes are
5 and 4, because the number of TCs is 6. So it would be failed to
configure the CBS for the two highest priority TCs.
Fixes: c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case of error when adding a new rule that refers to an anonymous set,
deactivate expressions via NFT_TRANS_PREPARE state, not NFT_TRANS_RELEASE.
Thus, the lookup expression marks anonymous sets as inactive in the next
generation to ensure it is not reachable in this transaction anymore and
decrement the set refcount as introduced by c1592a89942e ("netfilter:
nf_tables: deactivate anonymous set from preparation phase"). The abort
step takes care of undoing the anonymous set.
This is also consistent with rule deletion, where NFT_TRANS_PREPARE is
used. Note that this error path is exercised in the preparation step of
the commit protocol. This patch replaces nf_tables_rule_release() by the
deactivate and destroy calls, this time with NFT_TRANS_PREPARE.
Due to this incorrect error handling, it is possible to access a
dangling pointer to the anonymous set that remains in the transaction
list.
Fixes: 958bee14d071 ("netfilter: nf_tables: use new transaction infrastructure to handle sets") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the buffer leak that occurs while switching
the port up and down with traffic and XDP by
checking for an active XDP program and freeing all empty TX buffers.
Fixes: efc2214b6047 ("ice: Add support for XDP") Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The pipapo set backend follows copy-on-update approach, maintaining one
clone of the existing datastructure that is being updated. The clone
and current datastructures are swapped via rcu from the commit step.
The existing integration with the commit protocol is flawed because
there is no operation to clean up the clone if the transaction is
aborted. Moreover, the datastructure swap happens on set element
activation.
This patch adds two new operations for sets: commit and abort, these new
operations are invoked from the commit and abort steps, after the
transactions have been digested, and it updates the pipapo set backend
to use it.
This patch adds a new ->pending_update field to sets to maintain a list
of sets that require this new commit and abort operations.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(a) tCSC: the interval between the assertion of the chip select and the
first clock edge
(b) tASC: the interval between the last clock edge and the deassertion
of the chip select
What is a bit surprising, but is documented in the figure "Example of
continuous transfer (CPHA=1, CONT=1)" in the datasheet, is that when the
chip select stays asserted between multiple TX FIFO writes, the tCSC and
tASC times still apply. With CONT=1, chip select remains asserted, but
SCK takes a break and goes to the idle state for tASC + tCSC ns.
In other words, the default values (of 0 and 0 ns) result in SCK
glitches where the SCK transition to the idle state, as well as the SCK
transition from the idle state, will have no delay in between, and it
may appear that a SCK cycle has simply gone missing. The resulting
timing violation might cause data corruption in many peripherals, as
their chip select is asserted.
The driver has device tree bindings for tCSC ("fsl,spi-cs-sck-delay")
and tASC ("fsl,spi-sck-cs-delay"), but these are only specified to apply
when the chip select toggles in the first place, and this timing
characteristic depends on each peripheral. Many peripherals do not have
explicit timing requirements, so many device trees do not have these
properties present at all.
Nonetheless, the lack of SCK glitches is a common sense requirement, and
since the SCK stays in the idle state during transfers for tCSC+tASC ns,
and that in itself should look like half a cycle, then let's ensure that
tCSC and tASC are at least a quarter of a SCK period, such that their
sum is at least half of one.
Fixes: 95bf15f38641 ("spi: fsl-dspi: Add ~50ns delay between cs and sck") Reported-by: Lisa Chen (陈敏捷) <minjie.chen@geekplus.com> Debugged-by: Lisa Chen (陈敏捷) <minjie.chen@geekplus.com> Tested-by: Lisa Chen (陈敏捷) <minjie.chen@geekplus.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230529223402.1199503-1-vladimir.oltean@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a reference count error in error path code and a potential race
in check_rkey() in rxe_resp.c. When looking up the rkey for a memory
window the reference to the mw from rxe_lookup_mw() is dropped before a
reference is taken on the mr referenced by the mw. If the mr is destroyed
immediately after the call to rxe_put(mw) the mr pointer is unprotected
and may end up pointing at freed memory. The rxe_get(mr) call should take
place before the rxe_put(mw) call.
All errors in check_rkey() call rxe_put(mw) if mw is not NULL but it was
already called after the above. The mw pointer should be set to NULL after
the rxe_put(mw) call to prevent this from happening.
Fixes: cdd0b85675ae ("RDMA/rxe: Implement memory access through MWs") Link: https://lore.kernel.org/r/20230517211509.1819998-1-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In rxe_net.c a received packet, from udp or loopback, is passed to
rxe_rcv() in rxe_recv.c as a udp packet. I.e. skb->data is pointing at the
udp header. But rxe_rcv() makes length checks to verify the packet is long
enough to hold the roce headers as if it were a roce
packet. I.e. skb->data pointing at the bth header. A runt packet would
appear to have 8 more bytes than it actually does which may lead to
incorrect behavior.
This patch calls skb_pull() to adjust the skb to point at the bth header
before calling rxe_rcv() which fixes this error.
In current design:
1. PD and clt_path->s.dev are shared among connections.
2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and
when clt_path->s.dev become zero, it will destroy PD.
4. when con[1] failed to create, con[1] will not take clt_path->s.dev,
but it try to decreased clt_path->s.dev
So, in case create_cm(con[0]) succeeds but create_cm(con[1]) fails,
destroy_con_cq_qp(con[1]) will be called first which will destroy the PD
while this PD is still taken by con[0].
Here, we refactor the error path of create_cm() and init_conns(), so that
we do the cleanup in the order they are created.
The warning occurs when destroying RXE PD whose reference count is not
zero.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/1682384563-2-4-git-send-email-lizhijian@fujitsu.com Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Tested-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The last iu->buf will leak if ib_dma_mapping_error() fails.
Fixes: c0894b3ea69d ("RDMA/rtrs: core: lib functions shared between client and server modules") Link: https://lore.kernel.org/r/1682384563-2-3-git-send-email-lizhijian@fujitsu.com Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Consider a scenario where cable disconnect happens when there is an active
usb reqest queued to the UDC. As part of the disconnect we would issue an
end transfer with no interrupt-on-completion before giving back this
request. Since we are giving back the request without skipping TRBs the
num_trbs field of dwc3_request still holds the stale value previously used.
Function drivers re-use same request for a given bind-unbind session and
hence their dwc3_request context gets preserved across cable
disconnect/connect. When such a request gets re-queued after cable connect,
we would increase the num_trbs field on top of the previous stale value
thus incorrectly representing the number of TRBs used. Fix this by
resetting num_trbs field before giving back the request.
Fixes: 09fe1f8d7e2f ("usb: dwc3: gadget: track number of TRBs per request") Cc: stable <stable@kernel.org> Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Message-ID: <1685654850-8468-1-git-send-email-quic_eserrao@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some dwc3 glue drivers are currently accessing the driver data of the
child core device directly, which is clearly a bad idea as the child may
not have probed yet or may have been unbound from its driver.
As a workaround until the glue drivers have been fixed, clear the driver
data pointer before allowing the glue parent device to runtime suspend
to prevent its driver from accessing data that has been freed during
unbind.
The Qualcomm dwc3 glue driver is currently accessing the driver data of
the child core device during suspend and on wakeup interrupts. This is
clearly a bad idea as the child may not have probed yet or could have
been unbound from its driver.
The first such layering violation was part of the initial version of the
driver, but this was later made worse when the hack that accesses the
driver data of the grand child xhci device to configure the wakeup
interrupts was added.
Fixing this properly is not that easily done, so add a sanity check to
make sure that the child driver data is non-NULL before dereferencing it
for now.
Note that this relies on subtleties like the fact that driver core is
making sure that the parent is not suspended while the child is probing.
usb_udc_connect_control(), soft_connect_store() and
usb_gadget_deactivate() can potentially race against each other to invoke
usb_gadget_connect()/usb_gadget_disconnect(). To prevent this, guard
udc->started, gadget->allow_connect, gadget->deactivate and
gadget->connect with connect_lock so that ->pullup() is only invoked when
the gadget is bound, started and not deactivated. The routines
usb_gadget_connect_locked(), usb_gadget_disconnect_locked(),
usb_udc_connect_control_locked(), usb_gadget_udc_start_locked(),
usb_gadget_udc_stop_locked() are called with this lock held.
An earlier version of this commit was reverted due to the crash reported in
https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/.
commit 16737e78d190 ("usb: gadget: udc: core: Offload usb_udc_vbus_handler processing")
addresses the crash reported.
usb_udc_vbus_handler() can be invoked from interrupt context by irq
handlers of the gadget drivers, however, usb_udc_connect_control() has
to run in non-atomic context due to the following:
a. Some of the gadget driver implementations expect the ->pullup
callback to be invoked in non-atomic context.
b. usb_gadget_disconnect() acquires udc_lock which is a mutex.
Hence offload invocation of usb_udc_connect_control()
to workqueue.
UDC should not be pulled up unless gadget driver is bound. The new flag
"allow_connect" is now set by gadget_bind_driver() and cleared by
gadget_unbind_driver(). This prevents work item to pull up the gadget
even if queued when the gadget driver is already unbound.
The current implementation mistakenly performs a & operation on
the output of sysfs_emit. This patch performs the & operation before
calling sysfs_emit.
Fixes: 662a60102c12 ("usb: typec: Separate USB Power Delivery from USB Type-C") Cc: stable <stable@kernel.org> Reported-by: Benson Leung <bleung@chromium.org> Signed-off-by: Pavan Holla <pholla@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Benson Leung <bleung@chromium.org>
Message-ID: <20230607193328.3359487-1-pholla@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the error interrupt is never acknowledged, so once active it
will stay active indefinitely, causing the handler to be called in an
infinite loop.
Fixes: 2f0fc4159a6a ("SERIAL: Lantiq: Add driver for MIPS Lantiq SOCs.") Cc: <stable@vger.kernel.org> Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Message-ID: <20230602133029.546-1-mail@bernhard-seibold.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When resuming from system sleep states the driver issues following
warning on Intel hardware:
thunderbolt 0000:07:00.0: interrupt for TX ring 0 is already enabled
The reason for this is that the commit in question did not mask the ring
interrupt on Intel hardware leaving the interrupt active. Fix this by
masking it also in Intel hardware.
Reported-by: beld zhang <beldzhang@gmail.com> Tested-by: beld zhang <beldzhang@gmail.com> Closes: https://lore.kernel.org/linux-usb/ZHKW5NeabmfhgLbY@debian.me/ Fixes: c4af8e3fecd0 ("thunderbolt: Clear registers properly when auto clear isn't in use") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both tb_xdomain_enable_paths() and tb_xdomain_disable_paths() expect -1,
not 0, if the corresponding ring is not needed. For this reason change
the driver to use correct value for the rings that are not needed.
Fixes: 180b0689425c ("thunderbolt: Allow multiple DMA tunnels over a single XDomain connection") Cc: stable@vger.kernel.org Reported-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the boot firmware has already established tunnels, especially ones
that have special requirements from the link such as DisplayPort, we
should not blindly enable CL states (nor change the TMU configuration).
Otherwise the existing tunnels may not work as expected.
For this reason, skip the CL state enabling when we go over the existing
topology. This will also keep the TMU settings untouched because we do
not change the TMU configuration when CL states are not enabled.
On smu 13.0.0, the compute workload type cannot be set on all the skus
due to some other problems. This workaround is to make sure compute workload type
can also run on some specific skus.
Non-root users shouldn't be able to try to trigger a VBIOS flash
or query the flashing status. This should be reserved for users with the
appropriate permissions.
Cc: stable@vger.kernel.org Fixes: 8424f2ccb3c0 ("drm/amdgpu/psp: Add vbflash sysfs interface support") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VBIOS image update flow requires userspace to:
1) Write the image to `psp_vbflash`
2) Read `psp_vbflash`
3) Poll `psp_vbflash_status` to check for completion
If userspace reads `psp_vbflash` before writing an image, it's
possible that it causes problems that can put the dGPU into an invalid
state.
Explicitly check that an image has been written before letting a read
succeed.
Cc: stable@vger.kernel.org Fixes: 8424f2ccb3c0 ("drm/amdgpu/psp: Add vbflash sysfs interface support") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Why] most edp support only timings from edid. applying
non-edid timings, especially those timings out of edp
bandwidth, may damage edp.
[How] do not add non-edid timings for edp.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only vcn0 can process AV1 codecx. In order to use both vcn0 and
vcn1 in h264/265 transcode to AV1 cases, set vcn0 sched score to 1
at initialization time.
Signed-off-by: Sonny Jiang <sonjiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the IB specification rel-1.6, section 3.5.3:
"QKEYs with the most significant bit set are considered controlled
QKEYs, and a HCA does not allow a consumer to arbitrarily specify a
controlled QKEY."
Thus, block non-privileged users from setting such a QKEY.
This seems to have existed for ever but is now more apparant after
commit 9bff18d13473 ("drm/ttm: use per BO cleanup workers")
My analysis: two threads are running, one in the irq signalling the
fence, in dma_fence_signal_timestamp_locked, it has done the
DMA_FENCE_FLAG_SIGNALLED_BIT setting, but hasn't yet reached the
callbacks.
The second thread in nouveau_cli_work_ready, where it sees the fence is
signalled, so then puts the fence, cleanups the object and frees the
work item, which contains the callback.
Thread one goes again and tries to call the callback and causes the
use-after-free.
Proposed fix: lock the fence signalled check in nouveau_cli_work_ready,
so either the callbacks are done or the memory is freed.
Reviewed-by: Karol Herbst <kherbst@redhat.com> Fixes: 11e451e74050 ("drm/nouveau: remove fence wait code from deferred client work handler") Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://lore.kernel.org/dri-devel/20230615024008.1600281-1-airlied@gmail.com/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a possible memory leak in __stmmac_open when stmmac_init_phy fails.
It's also needed to free everything allocated by stmmac_setup_dma_desc
and not just the dma_conf struct.
Drop free_dma_desc_resources from __stmmac_open and correctly call
free_dma_desc_resources on each user of __stmmac_open on error.
Reported-by: Jose Abreu <Jose.Abreu@synopsys.com> Fixes: ba39b344e924 ("net: ethernet: stmicro: stmmac: generate stmmac dma conf before open") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> Link: https://lore.kernel.org/r/20230614091714.15912-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
issue_discard() passes GFP_NOWAIT to __blkdev_issue_discard() despite
its code assuming bio_alloc() always succeeds.
Commit 3dba53a958a75 ("dm thin: use __blkdev_issue_discard for async
discard support") clearly shows where things went bad:
Before commit 3dba53a958a75, dm-thin.c's open-coded
__blkdev_issue_discard_async() properly handled using GFP_NOWAIT.
Unfortunately __blkdev_issue_discard() doesn't and it was missed
during review.
Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As shown above, if dm_pool_commit_metadata() and
dm_pool_abort_metadata() fail in pool_message process, kworker may
trigger UAF.
Fixes: be500ed721a6 ("dm space maps: improve performance with inc/dec on ranges of blocks") Cc: stable@vger.kernel.org Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds new DEVICE_FLG with QUIRK_FLAG_DSD_RAW and Vendor Id for
HEM devices which supports native DSD. Prior to this change Linux kernel
was not enabling native DSD playback for HEM devices, and as a result,
DSD audio was being converted to PCM "on the fly". HEM devices,
when connected to the system, would only play audio in PCM format,
even if the source material was in DSD format. With the addition of new
VENDOR_FLG in the quircks.c file, the devices are now correctly
recognized, and raw DSD data is transmitted to the device,
allowing for native DSD playback.
As reported in the bugzilla below, the PM resume of a UAC3 device may
fail due to the incomplete power state change, stuck at D1. The
reason is that the driver expects the full D0 power state change only
at hw_params, while the normal PCM resume procedure doesn't call
hw_params.
For fixing the bug, we add the same power state update to D0 at the
prepare callback, which is certainly called by the resume procedure.
Note that, with this change, the power state change in the hw_params
becomes almost redundant, since snd_usb_hw_params() doesn't touch the
parameters (at least it tires so). But dropping it is still a bit
risky (e.g. we have the media-driver binding), so I leave the D0 power
state change in snd_usb_hw_params() as is for now.
Commit 619104ba453ad0 ("btrfs: move common NOCOW checks against a file
extent into a helper") changed our call to btrfs_cross_ref_exist() to
always pass false for the 'strict' parameter. We're passing this down
through the stack so that we can do a full check for cross references
during swapfile activation.
btrfs subvol snap swappy swapsnap
btrfs subvol del -C swapsnap
btrfs fi sync /
sync;sync;sync
swapon swappy/swapfile
The fix is to just use args->strict, and everyone except swapfile
activation is passing false.
Fixes: 619104ba453ad0 ("btrfs: move common NOCOW checks against a file extent into a helper") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can_nocow_extent can reduce the len passed in, which needs to be
propagated to btrfs_dio_iomap_begin so that iomap does not submit
more data then is mapped.
This problems exists since the btrfs_get_blocks_direct helper was added
in commit c5794e51784a ("btrfs: Factor out write portion of
btrfs_get_blocks_direct"), but the ordered_extent splitting added in
commit b73a6fd1b1ef ("btrfs: split partial dio bios before submit")
added a WARN_ON that made a syzkaller test fail.
Reported-by: syzbot+ee90502d5c8fd1d0dd93@syzkaller.appspotmail.com Fixes: c5794e51784a ("btrfs: Factor out write portion of btrfs_get_blocks_direct") CC: stable@vger.kernel.org # 6.1+ Tested-by: syzbot+ee90502d5c8fd1d0dd93@syzkaller.appspotmail.com Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[CAUSE]
Since the introduction of global roots, we handle
csum/extent/free-space-tree roots as global roots, even if no
extent-tree-v2 feature is enabled.
So for regular csum/extent/fst roots, we load them into
fs_info::global_root_tree rb tree.
And we should not expect any conflicts in that rb tree, thus we have an
ASSERT() inside btrfs_global_root_insert().
But rescue=usebackuproot can break the assumption, as we will try to
load those trees again and again as long as we have bad roots and have
backup roots slot remaining.
So in that case we can have conflicting roots in the rb tree, and
triggering the ASSERT() crash.
[FIX]
We can safely remove that ASSERT(), as the caller will properly put the
offending root.
To make further debugging easier, also add two explicit error messages:
- Error message for conflicting global roots
- Error message when using backup roots slot
Reported-by: syzbot+a694851c6ab28cbcfb9c@syzkaller.appspotmail.com Fixes: abed4aaae4f7 ("btrfs: track the csum, extent, and free space trees in a rb tree") CC: stable@vger.kernel.org # 6.1+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
And both of them have their range [sh_addr ... sh_addr+sh_size] on the
area pointed by `e_entry`.
This causes that image->start is calculated twice, once for .text and
another time for .text.hot. The second calculation leaves image->start
in a random location.
Because of this, the system crashes immediately after:
kexec_core: Starting new kernel
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-0-b05c520b7296@chromium.org Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-1-b05c520b7296@chromium.org Fixes: 930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Ross Zwisler <zwisler@google.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Philipp Rudo <prudo@redhat.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Palmer Dabbelt <palmer@rivosinc.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Simon Horman <horms@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Rix <trix@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the application sets ->msg_control and we have to later retry this
command, or if it got queued with IOSQE_ASYNC to begin with, then we
need to retain the original msg_control value. This is due to the net
stack overwriting this field with an in-kernel pointer, to copy it
in. Hitting that path for the second time will now fail the copy from
user, as it's attempting to copy from a non-user address.
The current sanity check for nilfs2 geometry information lacks checks for
the number of segments stored in superblocks, so even for device images
that have been destructively truncated or have an unusually high number of
segments, the mount operation may succeed.
This causes out-of-bounds block I/O on file system block reads or log
writes to the segments, the latter in particular causing
"a_ops->writepages" to repeatedly fail, resulting in sync_inodes_sb() to
hang.
Fix this issue by checking the number of segments stored in the superblock
and avoiding mounting devices that can cause out-of-bounds accesses. To
eliminate the possibility of overflow when calculating the number of
blocks required for the device from the number of segments, this also adds
a helper function to calculate the upper bound on the number of segments
and inserts a check using it.
Syzbot reports that in its stress test for resize ioctl, the log writing
function nilfs_segctor_do_construct hits a WARN_ON in
nilfs_segctor_truncate_segments().
It turned out that there is a problem with the current implementation of
the resize ioctl, which changes the writable range on the device (the
range of allocatable segments) at the end of the resize process.
This order is necessary for file system expansion to avoid corrupting the
superblock at trailing edge. However, in the case of a file system
shrink, if log writes occur after truncating out-of-bounds trailing
segments and before the resize is complete, segments may be allocated from
the truncated space.
The userspace resize tool was fine as it limits the range of allocatable
segments before performing the resize, but it can run into this issue if
the resize ioctl is called alone.
Fix this issue by changing nilfs_sufile_resize() to update the range of
allocatable segments immediately after successful truncation of segment
space in case of file system shrink.
A syzbot fault injection test reported that nilfs_btnode_create_block, a
helper function that allocates a new node block for b-trees, causes a
kernel BUG for disk images where the file system block size is smaller
than the page size.
This was due to unexpected flags on the newly allocated buffer head, and
it turned out to be because the buffer flags were not cleared by
nilfs_btnode_abort_change_key() after an error occurred during a b-tree
update operation and the buffer was later reused in that state.
Fix this issue by using nilfs_btnode_delete() to abandon the unused
preallocated buffer in nilfs_btnode_abort_change_key().
The given value of 1518 seems to refer to the layer 2 ethernet frame
size without 802.1Q tag. Actual use of the "max-frame-size" including in
the consumer of the "altr,tse-1.0" compatible is the MTU.
Before storing a page, zswap first checks if the number of stored pages
exceeds the limit specified by memory.zswap.max, for each cgroup in the
hierarchy. If this limit is reached or exceeded, then zswap shrinking is
triggered and short-circuits the store attempt.
However, since the zswap's LRU is not memcg-aware, this can create the
following pathological behavior: the cgroup whose zswap limit is 0 will
evict pages from other cgroups continually, without lowering its own zswap
usage. This means the shrinking will continue until the need for swap
ceases or the pool becomes empty.
As a result of this, we observe a disproportionate amount of zswap
writeback and a perpetually small zswap pool in our experiments, even
though the pool limit is never hit.
More generally, a cgroup might unnecessarily evict pages from other
cgroups before we drive the memcg back below its limit.
This patch fixes the issue by rejecting zswap store attempt without
shrinking the pool when obj_cgroup_may_zswap() returns false.
When changing a file size with fallocate() the new size isn't being
checked. In particular, the FSIZE ulimit isn't being checked, which makes
fstest generic/228 fail. Simply adding a call to inode_newsize_ok() fixes
this issue.
Link: https://lkml.kernel.org/r/20230529152645.32680-1-lhenriques@suse.de Signed-off-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Mark Fasheh <mark@fasheh.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's trivial to trigger a use-after-free bug in the ocfs2 quotas code using
fstest generic/452. After a read-only remount, quotas are suspended and
ocfs2_mem_dqinfo is freed through ->ocfs2_local_free_info(). When unmounting
the filesystem, an UAF access to the oinfo will eventually cause a crash.
BUG: KASAN: slab-use-after-free in timer_delete+0x54/0xc0
Read of size 8 at addr ffff8880389a8208 by task umount/669
...
Call Trace:
<TASK>
...
timer_delete+0x54/0xc0
try_to_grab_pending+0x31/0x230
__cancel_work_timer+0x6c/0x270
ocfs2_disable_quotas.isra.0+0x3e/0xf0 [ocfs2]
ocfs2_dismount_volume+0xdd/0x450 [ocfs2]
generic_shutdown_super+0xaa/0x280
kill_block_super+0x46/0x70
deactivate_locked_super+0x4d/0xb0
cleanup_mnt+0x135/0x1f0
...
</TASK>
Link: https://lkml.kernel.org/r/20230522102112.9031-1-lhenriques@suse.de Signed-off-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
autoremove_wake_function uses list_del_init_careful, so should epoll's
more aggressive variant. It only doesn't because it was copied from an
older wait.c rather than the most recent.
[bsegall@google.com: add comment] Link: https://lkml.kernel.org/r/xm26bki0ulsr.fsf_-_@google.com Link: https://lkml.kernel.org/r/xm26pm6hvfer.fsf@google.com Fixes: a16ceb139610 ("epoll: autoremove wakers even more aggressively") Signed-off-by: Ben Segall <bsegall@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The locking was changed recently so now the caller holds the wiphy_lock()
lock. Taking the lock inside the reg_wdev_chan_valid() function will
lead to a deadlock.
Fixes: f7e60032c661 ("wifi: cfg80211: fix locking in regulatory disconnect") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/40c4114a-6cb4-4abf-b013-300b598aba65@moroto.mountain Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This should use wiphy_lock() now instead of requiring the
RTNL, since __cfg80211_leave() via cfg80211_leave() is now
requiring that lock to be held.
Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / users / dwmw2 / linux.git / log