Krzysztof Kozlowski [Tue, 9 Jul 2024 12:59:31 +0000 (14:59 +0200)]
thermal/drivers/broadcom: Fix race between removal and clock disable
During the probe, driver enables clocks necessary to access registers
(in get_temp()) and then registers thermal zone with managed-resources
(devm) interface. Removal of device is not done in reversed order,
because:
1. Clock will be disabled in driver remove() callback - thermal zone is
still registered and accessible to users,
2. devm interface will unregister thermal zone.
This leaves short window between (1) and (2) for accessing the
get_temp() callback with disabled clock.
Fix this by enabling clock also via devm-interface, so entire cleanup
path will be in proper, reversed order.
Fixes: 8454c8c09c77 ("thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-1-241644e2b6e0@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
dt-bindings: thermal: Drop 'trips' node as required
It is possible to have thermal zones which don't have any trip points.
These zones in effect simply represent a temperature sensor without any
action associated with it. While the schema has always required a
'trips' node, users have existed for a long time without it. Update the
schema to match reality.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Krzysztof Kozlowski [Fri, 5 Jul 2024 09:51:40 +0000 (11:51 +0200)]
dt-bindings: thermal: simplify few bindings
Simplify few bindings which already reference thermal-sensor.yaml schema
by dropping unneeded requiring of '#thermal-sensor-cells' and dropping
assigned-clocks properties (core schema allows it if 'clocks' are
there).
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Amit Kucheria <amitk@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-11-554061b52fbc@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Device is a thermal sensor and all in-tree DTS provide
'#thermal-sensor-cells', so reference the thermal-sensor.yaml to
simplify it, bring the common definition of '#thermal-sensor-cells'
property and require it.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Guillaume LA ROQUE <glaroque@baylibre.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-2-554061b52fbc@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Chen-Yu Tsai [Thu, 20 Jun 2024 09:23:03 +0000 (17:23 +0800)]
thermal/drivers/mediatek/lvts_thermal: Provide default calibration data
On some pre-production hardware, the SoCs do not contain calibration
data for the thermal sensors. The downstream drivers provide default
values that sort of work, instead of having the thermal sensors not
work at all.
Port the default values to the upstream driver. These values are from
the ChromeOS kernels, which sadly do not cover the MT7988.
Krzysztof Kozlowski [Tue, 2 Jul 2024 14:52:48 +0000 (16:52 +0200)]
dt-bindings: thermal: correct thermal zone node name limit
Linux kernel uses thermal zone node name during registering thermal
zones and has a hard-coded limit of 20 characters, including terminating
NUL byte. The bindings expect node names to finish with '-thermal'
which is eight bytes long, thus we have only 11 characters for the reset
of the node name (thus 10 for the pattern after leading fixed character).
Reported-by: Rob Herring <robh@kernel.org> Closes: https://lore.kernel.org/all/CAL_JsqKogbT_4DPd1n94xqeHaU_J8ve5K09WOyVsRX3jxxUW3w@mail.gmail.com/ Fixes: 1202a442a31f ("dt-bindings: thermal: Add yaml bindings for thermal zones") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240702145248.47184-1-krzysztof.kozlowski@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Julien Panis [Mon, 3 Jun 2024 10:50:49 +0000 (12:50 +0200)]
dt-bindings: thermal: mediatek: Fix thermal zone definitions for MT8188
Fix thermal zone names for consistency with the other SoCs:
- GPU0 must be used as the first GPU item.
- SOCx deal with audio DSP, video, and infra subsystems.
The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.
The definitions can be safely modified here because they are used only
in the LVTS driver, which is modified accordingly, and have not yet
been included in a released kernel.
Fixes: 78c88534e5e1 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8188") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Julien Panis <jpanis@baylibre.com> Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-2-8c8e3c7a3643@baylibre.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Julien Panis [Mon, 3 Jun 2024 10:50:48 +0000 (12:50 +0200)]
dt-bindings: thermal: mediatek: Fix thermal zone definition for MT8186
Fix a thermal zone name for consistency with the other SoCs:
MFG contains GPU, the latter is more specific and must be used here.
The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.
The definition can be safely modified here because it is used only
in the LVTS driver, which is modified accordingly, and has not yet
been included in a released kernel.
Fixes: a2ca202350f9 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8186") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Julien Panis <jpanis@baylibre.com> Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-1-8c8e3c7a3643@baylibre.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
thermal/drivers/k3_j72xx_bandgap: Implement suspend/resume support
This add suspend-to-ram support.
The derived_table is kept-as is, so the resume is only about
pm_runtime_* calls and restoring the same registers as the probe.
Extract the hardware initialization procedure to a function called at
both probe-time & resume-time.
The probe-time loop is split in two to ensure doing the hardware
initialization before registering thermal zones. That ensures our
callbacks cannot be called while in bad state.
The 100ms delay in the hardware initialization sequence was removed.
It was initially added to be sure the thresholds are programmed before
enabling the interrupt, but in fact it's not needed (tested on J7200
platform).
Rafael J. Wysocki [Mon, 8 Jul 2024 15:16:00 +0000 (17:16 +0200)]
thermal: core: Fix list sorting in __thermal_zone_device_update()
The order in which lists are sorted in __thermal_zone_device_update()
is reverse with respect to what it should be due to a mistake in
thermal_trip_notify_cmp().
Fix it and observe that it is not necessary to sort the lists in
different orders. They can both be sorted in ascending order if
way_down_list is walked in reverse order which allows the code to
be slightly more straightforward (and less prone to silly mistakes).
Rafael J. Wysocki [Fri, 28 Jun 2024 12:10:03 +0000 (14:10 +0200)]
thermal: core: Call monitor_thermal_zone() if zone temperature is invalid
Commit 202aa0d4bb53 ("thermal: core: Do not call handle_thermal_trip()
if zone temperature is invalid") caused __thermal_zone_device_update()
to return early if the current thermal zone temperature was invalid.
This was done to avoid running handle_thermal_trip() and governor
callbacks in that case which led to confusion. However, it went too
far because monitor_thermal_zone() still needs to be called even when
the zone temperature is invalid to ensure that it will be updated
eventually in case thermal polling is enabled and the driver has no
other means to notify the core of zone temperature changes (for example,
it does not register an interrupt handler or ACPI notifier).
Also if the .set_trips() zone callback is expected to set up monitoring
interrupts for a thermal zone, it has to be provided with valid
boundaries and that can only happen if the zone temperature is known.
Accordingly, to ensure that __thermal_zone_device_update() will
run again after a failing zone temperature check, make it call
monitor_thermal_zone() regardless of whether or not the zone
temperature is valid and make the latter schedule a thermal zone
temperature update if the zone temperature is invalid even if
polling is not enabled for the thermal zone.
Fixes: 202aa0d4bb53 ("thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid") Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2764814.mvXUDI8C0e@rjwysocki.net
[ rjw: Changed THERMAL_RECHECK_DELAY_MS to 250 ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
NÃcolas F. R. A. Prado [Tue, 2 Jul 2024 21:24:56 +0000 (17:24 -0400)]
thermal: gov_power_allocator: Return early in manage if trip_max is NULL
Commit da781936e7c3 ("thermal: gov_power_allocator: Allow binding
without trip points") allowed the governor to bind even when trip_max
is NULL. This allows a NULL pointer dereference to happen in the manage
callback.
Add an early return to prevent it, since the governor is expected to not do
anything in this case.
Linus Torvalds [Sun, 30 Jun 2024 21:32:24 +0000 (14:32 -0700)]
Merge tag 'ata-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add NOLPM quirk for for all Crucial BX SSD1 models.
Considering that we now have had bug reports for 3 different BX SSD1
variants from Crucial with the same product name, make the quirk more
inclusive, to catch more device models from the same generation.
- Fix a trivial NULL pointer dereference in the error path for
ata_host_release().
- Create a ata_port_free(), so that we don't miss freeing ata_port
struct members when freeing a struct ata_port.
- Fix a trivial double free in the error path for ata_host_alloc().
- Ensure that we remove the libata "remapped NVMe device count" sysfs
entry on .probe() error.
* tag 'ata-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Clean up sysfs file on error
ata: libata-core: Fix double free on error
ata,scsi: libata-core: Do not leak memory for ata_port struct members
ata: libata-core: Fix null pointer dereference on error
ata: libata-core: Add ATA_HORKAGE_NOLPM for all Crucial BX SSD1 models
Niklas Cassel [Sat, 29 Jun 2024 12:42:14 +0000 (14:42 +0200)]
ata: ahci: Clean up sysfs file on error
.probe() (ahci_init_one()) calls sysfs_add_file_to_group(), however,
if probe() fails after this call, we currently never call
sysfs_remove_file_from_group().
(The sysfs_remove_file_from_group() call in .remove() (ahci_remove_one())
does not help, as .remove() is not called on .probe() error.)
Thus, if probe() fails after the sysfs_add_file_to_group() call, the next
time we insmod the module we will get:
Niklas Cassel [Sat, 29 Jun 2024 12:42:13 +0000 (14:42 +0200)]
ata: libata-core: Fix double free on error
If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump
to the err_out label, which will call devres_release_group().
devres_release_group() will trigger a call to ata_host_release().
ata_host_release() calls kfree(host), so executing the kfree(host) in
ata_host_alloc() will lead to a double free:
Niklas Cassel [Sat, 29 Jun 2024 12:42:12 +0000 (14:42 +0200)]
ata,scsi: libata-core: Do not leak memory for ata_port struct members
libsas is currently not freeing all the struct ata_port struct members,
e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL).
Add a function, ata_port_free(), that is used to free a ata_port,
including its struct members. It makes sense to keep the code related to
freeing a ata_port in its own function, which will also free all the
struct members of struct ata_port.
Do not access ata_port struct members unconditionally.
Fixes: 633273a3ed1c ("libata-pmp: hook PMP support and enable it") Cc: stable@vger.kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20240629124210.181537-7-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
Linus Torvalds [Sun, 30 Jun 2024 17:00:01 +0000 (10:00 -0700)]
Merge tag 'kbuild-fixes-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove the executable bit from installed DTB files
- Escape $ in subshell execution in the debian-orig target
- Fix RPM builds with CONFIG_MODULES=n
- Fix xconfig with the O= option
- Fix scripts_gdb with the O= option
* tag 'kbuild-fixes-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: scripts/gdb: bring the "abspath" back
kbuild: Use $(obj)/%.cc to fix host C++ module builds
kbuild: rpm-pkg: fix build error with CONFIG_MODULES=n
kbuild: Fix build target deb-pkg: ln: failed to create hard link
kbuild: doc: Update default INSTALL_MOD_DIR from extra to updates
kbuild: Install dtb files as 0644 in Makefile.dtbinst
Linus Torvalds [Wed, 26 Jun 2024 00:50:04 +0000 (17:50 -0700)]
x86-32: fix cmpxchg8b_emu build error with clang
The kernel test robot reported that clang no longer compiles the 32-bit
x86 kernel in some configurations due to commit 95ece48165c1
("locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}()
functions").
The build fails with
arch/x86/include/asm/cmpxchg_32.h:149:9: error: inline assembly requires more registers than available
and the reason seems to be that not only does the cmpxchg8b instruction
need four fixed registers (EDX:EAX and ECX:EBX), with the emulation
fallback the inline asm also wants a fifth fixed register for the
address (it uses %esi for that, but that's just a software convention
with cmpxchg8b_emu).
Avoiding using another pointer input to the asm (and just forcing it to
use the "0(%esi)" addressing that we end up requiring for the sw
fallback) seems to fix the issue.
Linus Torvalds [Sun, 30 Jun 2024 16:11:59 +0000 (09:11 -0700)]
Merge tag 'staging-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 6.10-rc6, both for the
vc04_services drivers:
- build fix if CONFIG_DEBUGFS was not set
- initialization check fix that was much reported.
Both of these have been in linux-next this week with no reported
issues"
* tag 'staging-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_debugfs: Fix build if CONFIG_DEBUG_FS is not set
staging: vc04_services: vchiq_arm: Fix initialisation check
Linus Torvalds [Sun, 30 Jun 2024 15:57:43 +0000 (08:57 -0700)]
Merge tag 'tty-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial / console fixes from Greg KH:
"Here are a bunch of fixes/reverts for 6.10-rc6. Include in here are:
- revert the bunch of tty/serial/console changes that landed in -rc1
that didn't quite work properly yet.
Everyone agreed to just revert them for now and will work on making
them better for a future release instead of trying to quick fix the
existing changes this late in the release cycle
- 8250 driver port count bugfix
- Other tiny serial port bugfixes for reported issues
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "printk: Save console options for add_preferred_console_match()"
Revert "printk: Don't try to parse DEVNAME:0.0 console options"
Revert "printk: Flag register_console() if console is set on command line"
Revert "serial: core: Add support for DEVNAME:0.0 style naming for kernel console"
Revert "serial: core: Handle serial console options"
Revert "serial: 8250: Add preferred console in serial8250_isa_init_ports()"
Revert "Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports"
Revert "serial: 8250: Fix add preferred console for serial8250_isa_init_ports()"
Revert "serial: core: Fix ifdef for serial base console functions"
serial: bcm63xx-uart: fix tx after conversion to uart_port_tx_limited()
serial: core: introduce uart_port_tx_limited_flags()
Revert "serial: core: only stop transmit when HW fifo is empty"
serial: imx: set receiver level before starting uart
tty: mcf: MCF54418 has 10 UARTS
serial: 8250_omap: Implementation of Errata i2310
tty: serial: 8250: Fix port count mismatch with the device
Linus Torvalds [Sun, 30 Jun 2024 15:41:42 +0000 (08:41 -0700)]
Merge tag 'smp_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp fixes from Borislav Petkov:
- Fix "nosmp" and "maxcpus=0" after the parallel CPU bringup work went
in and broke them
- Make sure CPU hotplug dynamic prepare states are actually executed
* tag 'smp_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Fix broken cmdline "nosmp" and "maxcpus=0"
cpu/hotplug: Fix dynstate assignment in __cpuhp_setup_state_cpuslocked()
Linus Torvalds [Sun, 30 Jun 2024 15:36:13 +0000 (08:36 -0700)]
Merge tag 'irq_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Make sure multi-bridge machines get all eiointc interrupt controllers
initialized even if the number of CPUs has been limited by a cmdline
param
- Make sure interrupt lines on liointc hw are configured properly even
when interrupt routing changes
- Avoid use-after-free in the error path of the MSI init code
* tag 'irq_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Fix UAF in msi_capability_init
irqchip/loongson-liointc: Set different ISRs for different cores
irqchip/loongson-eiointc: Use early_cpu_to_node() instead of cpu_to_node()
Linus Torvalds [Sun, 30 Jun 2024 15:31:08 +0000 (08:31 -0700)]
Merge tag 'timers_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Warn when an hrtimer doesn't get a callback supplied
* tag 'timers_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Prevent queuing of hrtimer without a function callback
Linus Torvalds [Sat, 29 Jun 2024 16:21:40 +0000 (09:21 -0700)]
Merge tag 'xfs-6.10-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Always free only post-EOF delayed allocations for files with the
XFS_DIFLAG_PREALLOC or APPEND flags set.
- Do not align cow fork delalloc to cowextsz hint when running low on
space.
- Allow zero-size symlinks and directories as long as the link count is
zero.
- Change XFS_IOC_EXCHANGE_RANGE to be a _IOW only ioctl. This was ioctl
was introduced during v6.10 developement cycle.
- xfs_init_new_inode() now creates an attribute fork on a newly created
inode even if ATTR feature flag is not enabled.
* tag 'xfs-6.10-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: honor init_xattrs in xfs_init_new_inode for !ATTR fs
xfs: fix direction in XFS_IOC_EXCHANGE_RANGE
xfs: allow unlinked symlinks and dirs with zero size
xfs: restrict when we try to align cow fork delalloc to cowextsz hints
xfs: fix freeing speculative preallocations for preallocated files
Linus Torvalds [Sat, 29 Jun 2024 16:12:53 +0000 (09:12 -0700)]
Merge tag 'i2c-for-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two fixes for the testunit and and a fixup for the code reorganization
of the previous wmt-driver"
* tag 'i2c-for-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: discard write requests while old command is running
i2c: testunit: don't erase registers after STOP
i2c: viai2c: turn common code into a proper module
- sdhci-brcmstb: Fix support for erase/trim/discard
* tag 'mmc-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: Do not lock spinlock around mmc_gpio_get_ro()
mmc: sdhci: Do not invert write-protect twice
Revert "mmc: moxart-mmc: Use sg_miter for PIO"
mmc: sdhci-brcmstb: check R1_STATUS for erase/trim/discard
mmc: sdhci-pci-o2micro: Convert PCIBIOS_* return codes to errnos
mmc: sdhci-pci: Convert PCIBIOS_* return codes to errnos
Linus Torvalds [Fri, 28 Jun 2024 23:14:59 +0000 (16:14 -0700)]
Merge tag 'riscv-for-linus-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for vector load/store instruction decoding, which could result
in reserved vector element length encodings decoding as valid vector
instructions.
- Instruction patching now aggressively flushes the local instruction
cache, to avoid situations where patching functions on the flush path
results in torn instructions being fetched.
- A fix to prevent the stack walker from showing up as part of traces.
* tag 'riscv-for-linus-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: stacktrace: convert arch_stack_walk() to noinstr
riscv: patch: Flush the icache right after patching to avoid illegal insns
RISC-V: fix vector insn load/store width mask
Linus Torvalds [Fri, 28 Jun 2024 21:27:22 +0000 (14:27 -0700)]
x86: stop playing stack games in profile_pc()
The 'profile_pc()' function is used for timer-based profiling, which
isn't really all that relevant any more to begin with, but it also ends
up making assumptions based on the stack layout that aren't necessarily
valid.
Basically, the code tries to account the time spent in spinlocks to the
caller rather than the spinlock, and while I support that as a concept,
it's not worth the code complexity or the KASAN warnings when no serious
profiling is done using timers anyway these days.
And the code really does depend on stack layout that is only true in the
simplest of cases. We've lost the comment at some point (I think when
the 32-bit and 64-bit code was unified), but it used to say:
Assume the lock function has either no stack frame or a copy
of eflags from PUSHF.
which explains why it just blindly loads a word or two straight off the
stack pointer and then takes a minimal look at the values to just check
if they might be eflags or the return pc:
Eflags always has bits 22 and up cleared unlike kernel addresses
but that basic stack layout assumption assumes that there isn't any lock
debugging etc going on that would complicate the code and cause a stack
frame.
It causes KASAN unhappiness reported for years by syzkaller [1] and
others [2].
With no real practical reason for this any more, just remove the code.
Just for historical interest, here's some background commits relating to
this code from 2006:
0cb91a229364 ("i386: Account spinlocks to the caller during profiling for !FP kernels") 31679f38d886 ("Simplify profile_pc on x86-64")
Wolfram Sang [Thu, 27 Jun 2024 11:14:48 +0000 (13:14 +0200)]
i2c: testunit: discard write requests while old command is running
When clearing registers on new write requests was added, the protection
for currently running commands was missed leading to concurrent access
to the testunit registers. Check the flag beforehand.
Fixes: b39ab96aa894 ("i2c: testunit: add support for block process calls") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Wolfram Sang [Thu, 27 Jun 2024 11:14:47 +0000 (13:14 +0200)]
i2c: testunit: don't erase registers after STOP
STOP fallsthrough to WRITE_REQUESTED but this became problematic when
clearing the testunit registers was added to the latter. Actually, there
is no reason to clear the testunit state after STOP. Doing it when a new
WRITE_REQUESTED arrives is enough. So, no need to fallthrough, at all.
Fixes: b39ab96aa894 ("i2c: testunit: add support for block process calls") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Wolfram Sang [Fri, 28 Jun 2024 18:38:20 +0000 (20:38 +0200)]
Merge tag 'i2c-host-fixes-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
Fixed a build error following the major refactoring involving the
VIA-I2C modules. Originally, the code was split to group together
parts that would be used by different drivers. This caused build
issues when two modules linked to the same code.
Linus Torvalds [Fri, 28 Jun 2024 16:32:33 +0000 (09:32 -0700)]
Merge tag 'nfsd-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Due to a late review, revert and re-fix a recent crasher fix
* tag 'nfsd-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "nfsd: fix oops when reading pool_stats before server is started"
nfsd: initialise nfsd_info.mutex early.
Linus Torvalds [Fri, 28 Jun 2024 16:25:21 +0000 (09:25 -0700)]
Merge tag 'bcachefs-2024-06-28' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Simple stuff:
- NULL ptr/err ptr deref fixes
- fix for getting wedged on shutdown after journal error
- fix missing recalc_capacity() call, capacity now changes correctly
after a device goes read only
however: our capacity calculation still doesn't take into account
when we have mixed ro/rw devices and the ro devices have data on
them, that's going to be a more involved fix to separate accounting
for "capacity used on ro devices" and "capacity used on rw devices"
- boring syzbot stuff
Slightly more involved:
- discard, invalidate workers are now per device
this has the effect of simplifying how we take device refs in these
paths, and the device ref cleanup fixes a longstanding race between
the device removal path and the discard path
- fixes for how the debugfs code takes refs on btree_trans objects we
have debugfs code that prints in use btree_trans objects.
It uses closure_get() on trans->ref, which is mainly for the cycle
detector, but the debugfs code was using it on a closure that may
have hit 0, which is not allowed; for performance reasons we cannot
avoid having not-in-use transactions on the global list.
Introduce some new primitives to fix this and make the
synchronization here a whole lot saner"
* tag 'bcachefs-2024-06-28' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix kmalloc bug in __snapshot_t_mut
bcachefs: Discard, invalidate workers are now per device
bcachefs: Fix shift-out-of-bounds in bch2_blacklist_entries_gc
bcachefs: slab-use-after-free Read in bch2_sb_errors_from_cpu
bcachefs: Add missing bch2_journal_do_writes() call
bcachefs: Fix null ptr deref in journal_pins_to_text()
bcachefs: Add missing recalc_capacity() call
bcachefs: Fix btree_trans list ordering
bcachefs: Fix race between trans_put() and btree_transactions_read()
closures: closure_get_not_zero(), closure_return_sync()
bcachefs: Make btree_deadlock_to_text() clearer
bcachefs: fix seqmutex_relock()
bcachefs: Fix freeing of error pointers
Linus Torvalds [Fri, 28 Jun 2024 16:21:27 +0000 (09:21 -0700)]
Merge tag 'block-6.10-20240628' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"NVMe fixes via Keith:
- Fabrics fixes (Hannes)
- Missing module description (Jeff)
- Clang warning fix (Nathan)"
* tag 'block-6.10-20240628' of git://git.kernel.dk/linux:
nvmet-fc: Remove __counted_by from nvmet_fc_tgt_queue.fod[]
nvmet: make 'tsas' attribute idempotent for RDMA
nvme: fixup comment for nvme RDMA Provider Type
nvme-apple: add missing MODULE_DESCRIPTION()
nvmet: do not return 'reserved' for empty TSAS values
nvme: fix NVME_NS_DEAC may incorrectly identifying the disk as EXT_LBA.
Linus Torvalds [Fri, 28 Jun 2024 16:18:01 +0000 (09:18 -0700)]
Merge tag 'iommu-fixes-v6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Two cache flushing fixes for Intel and AMD drivers
- AMD guest translation enabling fix
- Update IOMMU tree location in MAINTAINERS file
* tag 'iommu-fixes-v6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Update IOMMU tree location
iommu/amd: Fix GT feature enablement again
iommu/vt-d: Fix missed device TLB cache tag
iommu/amd: Invalidate cache before removing device from domain list
Linus Torvalds [Fri, 28 Jun 2024 16:15:13 +0000 (09:15 -0700)]
Merge tag 'gpio-fixes-for-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"An assortment of driver fixes and two commits addressing a bad
behavior of the GPIO uAPI when reconfiguring requested lines.
- fix a race condition in i2c transfers by adding a missing i2c lock
section in gpio-pca953x
- validate the number of obtained interrupts in gpio-davinci
- add missing raw_spinlock_init() in gpio-graniterapids
- fix bad character device behavior: disallow GPIO line
reconfiguration without set direction both in v1 and v2 uAPI"
* tag 'gpio-fixes-for-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: cdev: Ignore reconfiguration without direction
gpiolib: cdev: Disallow reconfiguration without direction (uAPI v1)
gpio: graniterapids: Add missing raw_spinlock_init()
gpio: davinci: Validate the obtained number of IRQs
gpio: pca953x: fix pca953x_irq_bus_sync_unlock race
Linus Torvalds [Fri, 28 Jun 2024 16:10:01 +0000 (09:10 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A pair of small arm64 fixes for -rc6.
One is a fix for the recently merged uffd-wp support (which was
triggering a spurious warning) and the other is a fix to the clearing
of the initial idmap pgd in some configurations
Summary:
- Fix spurious page-table warning when clearing PTE_UFFD_WP in a live
pte
- Fix clearing of the idmap pgd when using large addressing modes"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Clear the initial ID map correctly before remapping
arm64: mm: Permit PTE SW bits to change in live mappings
Linus Torvalds [Fri, 28 Jun 2024 16:04:33 +0000 (09:04 -0700)]
Merge tag 'v6.10-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat fixes from Len Brown:
"Fix three recent minor turbostat regressions"
* tag 'v6.10-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: Add local build_bug.h header for snapshot target
tools/power turbostat: Fix unc freq columns not showing with '-q' or '-l'
tools/power turbostat: option '-n' is ambiguous
Nathan Chancellor [Wed, 29 May 2024 21:29:42 +0000 (14:29 -0700)]
tty: mxser: Remove __counted_by from mxser_board.ports[]
Work for __counted_by on generic pointers in structures (not just
flexible array members) has started landing in Clang 19 (current tip of
tree). During the development of this feature, a restriction was added
to __counted_by to prevent the flexible array member's element type from
including a flexible array member itself such as:
struct foo {
int count;
char buf[];
};
struct bar {
int count;
struct foo data[] __counted_by(count);
};
because the size of data cannot be calculated with the standard array
size formula:
sizeof(struct foo) * count
This restriction was downgraded to a warning but due to CONFIG_WERROR,
it can still break the build. The application of __counted_by on the
ports member of 'struct mxser_board' triggers this restriction,
resulting in:
drivers/tty/mxser.c:291:2: error: 'counted_by' should not be applied to an array with element of unknown size because 'struct mxser_port' is a struct type with a flexible array member. This will be an error in a future compiler version [-Werror,-Wbounds-safety-counted-by-elt-type-unknown-size]
291 | struct mxser_port ports[] __counted_by(nports);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Remove this use of __counted_by to fix the warning/error. However,
rather than remove it altogether, leave it commented, as it may be
possible to support this in future compiler releases.
An unintended consequence of commit 9c573cd31343 ("randomize_kstack:
Improve entropy diffusion") was that the per-architecture entropy size
filtering reduced how many bits were being added to the mix, rather than
how many bits were being used during the offsetting. All architectures
fell back to the existing default of 0x3FF (10 bits), which will consume
at most 1KiB of stack space. It seems that this is working just fine,
so let's avoid the confusion and update everything to use the default.
The prior intent of the per-architecture limits were:
arm64: capped at 0x1FF (9 bits), 5 bits effective
powerpc: uncapped (10 bits), 6 or 7 bits effective
riscv: uncapped (10 bits), 6 bits effective
x86: capped at 0xFF (8 bits), 5 (x86_64) or 6 (ia32) bits effective
s390: capped at 0xFF (8 bits), undocumented effective entropy
Current discussion has led to just dropping the original per-architecture
filters. The additional entropy appears to be safe for arm64, x86,
and s390. Quoting Arnd, "There is no point pretending that 15.75KB is
somehow safe to use while 15.00KB is not."
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/string_kunit.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/string_helpers_kunit.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Niklas Cassel [Thu, 27 Jun 2024 10:55:52 +0000 (12:55 +0200)]
ata: libata-core: Add ATA_HORKAGE_NOLPM for all Crucial BX SSD1 models
We got another report that CT1000BX500SSD1 does not work with LPM.
If you look in libata-core.c, we have six different Crucial devices that
are marked with ATA_HORKAGE_NOLPM. This model would have been the seventh.
(This quirk is used on Crucial models starting with both CT* and
Crucial_CT*)
It is obvious that this vendor does not have a great history of supporting
LPM properly, therefore, add the ATA_HORKAGE_NOLPM quirk for all Crucial
BX SSD1 models.
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Cc: stable@vger.kernel.org Reported-by: Alessandro Maggio <alex.tkd.alex@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832 Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240627105551.4159447-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
Adam Hawley [Wed, 22 May 2024 13:27:21 +0000 (16:27 +0300)]
tools/power turbostat: Fix unc freq columns not showing with '-q' or '-l'
Commit 78464d7681f7 ("tools/power turbostat: Add columns for clustered
uncore frequency") introduced 'probe_intel_uncore_frequency_cluster()'
in a way which prevents printing uncore frequency columns if either of
the '-q' or '-l' options are used. Systems which do not have multiple
uncore frequencies per package are unaffected by this regression.
Fix the function so that uncore frequency columns are shown when either
the '-l' or '-q' option is used by checking if 'quiet' is true after
adding counters for the uncore frequency columns.
Fixes: 78464d7681f7 ("tools/power turbostat: Add columns for clustered uncore frequency") Signed-off-by: Adam Hawley <adam.james.hawley@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
David Arcari [Mon, 20 May 2024 18:57:49 +0000 (14:57 -0400)]
tools/power turbostat: option '-n' is ambiguous
In some cases specifying the '-n' command line argument will cause
turbostat to fail. For instance 'turbostat -n 1' works fine; however,
'turbostat -n 1 -d' will fail. This is the result of the first call
to getopt_long_only() where "MP" is specified as the optstring. This can
be easily fixed by changing the optstring from "MP" to "MPn:" to remove
ambiguity between the arguments.
tools/power turbostat: option '-n' is ambiguous; possibilities: '-num_iterations' '-no-msr' '-no-perf'
Fixes: a0e86c90b83c ("tools/power turbostat: Add --no-perf option") Signed-off-by: David Arcari <darcari@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Fri, 28 Jun 2024 00:24:34 +0000 (17:24 -0700)]
Merge tag 'drm-fixes-2024-06-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular fixes, mostly amdgpu with some minor fixes in other places,
along with a fix for a very narrow UAF race in the pid handover code.
core:
- fix refcounting race on pid handover
fbdev:
- Fix fb_info when vmalloc is used, regression from
CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM.
i915:
- Fix potential UAF due to race on fence register revocation
nouveau
- nouveau tv mode fixes
panel:
- Add KOE TX26D202VM0BWA timings"
* tag 'drm-fixes-2024-06-28' of https://gitlab.freedesktop.org/drm/kernel:
drm/drm_file: Fix pid refcounting race
drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_ld_modes
drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_hd_modes
drm/amdgpu: Don't show false warning for reg list
drm/amdgpu: avoid using null object of framebuffer
drm/amd/display: Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is present
drm/amdgpu: Fix pci state save during mode-1 reset
drm/amdgpu/atomfirmware: fix parsing of vram_info
drm/amd/swsmu: add MALL init support workaround for smu_v14_0_1
drm/i915/gt: Fix potential UAF by revoke of fence registers
drm/panel: simple: Add missing display timing flags for KOE TX26D202VM0BWA
drm/fbdev-dma: Only set smem_start is enable per module option
Jann Horn [Thu, 27 Jun 2024 01:26:00 +0000 (11:26 +1000)]
drm/drm_file: Fix pid refcounting race
<maarten.lankhorst@linux.intel.com>, Maxime Ripard
<mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de>
filp->pid is supposed to be a refcounted pointer; however, before this
patch, drm_file_update_pid() only increments the refcount of a struct
pid after storing a pointer to it in filp->pid and dropping the
dev->filelist_mutex, making the following race possible:
process A process B
========= =========
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid B>, 1)
mutex_unlock(&dev->filelist_mutex)
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid A>, 1)
mutex_unlock(&dev->filelist_mutex)
get_pid(<pid A>)
synchronize_rcu()
put_pid(<pid B>) *** pid B reaches refcount 0 and is freed here ***
get_pid(<pid B>) *** UAF ***
synchronize_rcu()
put_pid(<pid A>)
As far as I know, this race can only occur with CONFIG_PREEMPT_RCU=y
because it requires RCU to detect a quiescent state in code that is not
explicitly calling into the scheduler.
This race leads to use-after-free of a "struct pid".
It is probably somewhat hard to hit because process A has to pass
through a synchronize_rcu() operation while process B is between
mutex_unlock() and get_pid().
Fix it by ensuring that by the time a pointer to the current task's pid
is stored in the file, an extra reference to the pid has been taken.
This fix also removes the condition for synchronize_rcu(); I think
that optimization is unnecessary complexity, since in that case we
would usually have bailed out on the lockless check above.
Fixes: 1c7a387ffef8 ("drm: Update file owner during use") Cc: <stable@vger.kernel.org> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Thu, 27 Jun 2024 19:35:30 +0000 (12:35 -0700)]
Merge tag 'pm-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Modify the intel_pstate driver to use HWP to initialize the ITMT
scheduler extension if ACPI CPPC cannot be used for that, which is the
case on some hybrid x86 systems (Rafael Wysocki)"
* tag 'pm-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Use HWP to initialize ITMT if CPPC is missing
Linus Torvalds [Thu, 27 Jun 2024 19:32:56 +0000 (12:32 -0700)]
Merge tag 'thermal-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Replace an earlier fix for a recent regression in the Step-Wise
thermal governor that was not effective in all of the relevant cases
(Rafael Wysocki)"
* tag 'thermal-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_step_wise: Go straight to instance->lower when mitigation is over
Linus Torvalds [Thu, 27 Jun 2024 19:23:52 +0000 (12:23 -0700)]
Merge tag 'io_uring-6.10-20240627' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Removal of a struct member that's unused since the 6.10 merge window,
and a fix for a regression in SQPOLL wakeups, bringing it back to how
it worked before the SQPOLL local task_work"
* tag 'io_uring-6.10-20240627' of git://git.kernel.dk/linux:
io_uring: signal SQPOLL task_work with TWA_SIGNAL_NO_IPI
io_uring: remove dead struct io_submit_state member
* tag 'nvme-6.10-2024-06-27' of git://git.infradead.org/nvme:
nvmet-fc: Remove __counted_by from nvmet_fc_tgt_queue.fod[]
nvmet: make 'tsas' attribute idempotent for RDMA
nvme: fixup comment for nvme RDMA Provider Type
nvme-apple: add missing MODULE_DESCRIPTION()
nvmet: do not return 'reserved' for empty TSAS values
nvme: fix NVME_NS_DEAC may incorrectly identifying the disk as EXT_LBA.
Linus Torvalds [Thu, 27 Jun 2024 18:09:03 +0000 (11:09 -0700)]
Merge tag 's390-6.10-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Add missing virt_to_phys() conversion for directed interrupt bit
vectors
- Fix broken configuration change notifications for virtio-ccw
- Fix sclp_init() cleanup path on failure and as result - fix a list
double add warning
- Fix unconditional adjusting of GOT entries containing undefined weak
symbols that resolve to zero
* tag 's390-6.10-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Do not adjust GOT entries for undef weak sym
s390/sclp: Fix sclp_init() cleanup on failure
s390/virtio_ccw: Fix config change notifications
s390/pci: Add missing virt_to_phys() for directed DIBV
Linus Torvalds [Thu, 27 Jun 2024 17:53:52 +0000 (10:53 -0700)]
Merge tag 'asm-generic-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are some bugfixes for system call ABI issues I found while
working on a cleanup series. None of these are urgent since these bugs
have gone unnoticed for many years, but I think we probably want to
backport them all to stable kernels, so it makes sense to have the
fixes included as early as possible.
One more fix addresses a compile-time warning in kallsyms that was
uncovered by a patch I did to enable additional warnings in 6.10. I
had mistakenly thought that this fix was already merged through the
module tree, but as Geert pointed out it was still missing"
* tag 'asm-generic-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
kallsyms: rework symbol lookup return codes
linux/syscalls.h: add missing __user annotations
syscalls: mmap(): use unsigned offset type consistently
s390: remove native mmap2() syscall
hexagon: fix fadvise64_64 calling conventions
csky, hexagon: fix broken sys_sync_file_range
sh: rework sync_file_range ABI
powerpc: restore some missing spu syscalls
parisc: use generic sys_fanotify_mark implementation
parisc: use correct compat recv/recvfrom syscalls
sparc: fix compat recv/recvfrom syscalls
sparc: fix old compat_sys_select()
syscalls: fix compat_sys_io_pgetevents_time64 usage
ftruncate: pass a signed offset
Linus Torvalds [Thu, 27 Jun 2024 17:26:16 +0000 (10:26 -0700)]
Merge tag 'for-6.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix quota root leak after quota disable failure
- fix condition when checking if a zone can be added as free
- allocate inode in NOFS context during logging or tree-log replay
- handle raid-stripe-tree lookup correctly during scrub
* tag 'for-6.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: qgroup: fix quota root leak after quota disable failure
btrfs: scrub: handle RST lookup error correctly
btrfs: zoned: fix initial free space detection
btrfs: use NOFS context when getting inodes during logging and log replay
Linus Torvalds [Thu, 27 Jun 2024 17:05:35 +0000 (10:05 -0700)]
Merge tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, bpf and netfilter.
There are a bunch of regressions addressed here, but hopefully nothing
spectacular. We are still waiting the driver fix from Intel, mentioned
by Jakub in the previous networking pull.
Current release - regressions:
- core: add softirq safety to netdev_rename_lock
- tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed
TFO
- batman-adv: fix RCU race at module unload time
Previous releases - regressions:
- openvswitch: get related ct labels from its master if it is not
confirmed
- eth: mlxsw: fix memory corruptions on spectrum-4 systems
- eth: ionic: use dev_consume_skb_any outside of napi
Previous releases - always broken:
- netfilter: fully validate NFT_DATA_VALUE on store to data registers
- unix: several fixes for OoB data
- tcp: fix race for duplicate reqsk on identical SYN
- bpf:
- fix may_goto with negative offset
- fix the corner case with may_goto and jump to the 1st insn
- fix overrunning reservations in ringbuf
- can:
- j1939: recover socket queue on CAN bus error during BAM
transmission
- mcp251xfd: fix infinite loop when xmit fails
- dsa: microchip: monitor potential faults in half-duplex mode
- eth: vxlan: pull inner IP header in vxlan_xmit_one()
- eth: ionic: fix kernel panic due to multi-buffer handling
Misc:
- selftest: unix tests refactor and a lot of new cases added"
* tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
net: mana: Fix possible double free in error handling path
selftest: af_unix: Check SIOCATMARK after every send()/recv() in msg_oob.c.
af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head.
selftest: af_unix: Check EPOLLPRI after every send()/recv() in msg_oob.c
selftest: af_unix: Check SIGURG after every send() in msg_oob.c
selftest: af_unix: Add SO_OOBINLINE test cases in msg_oob.c
af_unix: Don't stop recv() at consumed ex-OOB skb.
selftest: af_unix: Add non-TCP-compliant test cases in msg_oob.c.
af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head.
af_unix: Stop recv(MSG_PEEK) at consumed OOB skb.
selftest: af_unix: Add msg_oob.c.
selftest: af_unix: Remove test_unix_oob.c.
tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset()
netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
net: usb: qmi_wwan: add Telit FN912 compositions
tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
ionic: use dev_consume_skb_any outside of napi
net: dsa: microchip: fix wrong register write when masking interrupt
Fix race for duplicate reqsk on identical SYN
ibmvnic: Add tx check to prevent skb leak
...
Linus Torvalds [Thu, 27 Jun 2024 16:34:09 +0000 (09:34 -0700)]
Merge tag 'sound-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became bigger than usual, as it receives a pile of pending ASoC
fixes. Most of changes are for device-specific issues while there are
a few core fixes that are all rather trivial:
- DMA-engine sync fixes
- Continued MIDI2 conversion fixes
- Various ASoC Intel SOF fixes
- A series of ASoC topology fixes for memory handling
- AMD ACP fix, curing a recent regression, too
- Platform / codec-specific fixes for mediatek, atmel, realtek, etc"
* tag 'sound-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (40 commits)
ASoC: rt5645: fix issue of random interrupt from push-button
ALSA: seq: Fix missing MSB in MIDI2 SPP conversion
ASoC: amd: yc: Fix non-functional mic on ASUS M5602RA
ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook 645/665 G11.
ALSA: hda/realtek: Fix conflicting quirk for PCI SSID 17aa:3820
ALSA: dmaengine_pcm: terminate dmaengine before synchronize
ALSA: hda/relatek: Enable Mute LED on HP Laptop 15-gw0xxx
ALSA: PCM: Allow resume only for suspended streams
ALSA: seq: Fix missing channel at encoding RPN/NRPN MIDI2 messages
ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link
ASoC: fsl-asoc-card: set priv->pdev before using it
ASoC: amd: acp: move chip->flag variable assignment
ASoC: amd: acp: remove i2s configuration check in acp_i2s_probe()
ASoC: amd: acp: add a null check for chip_pdev structure
ASoC: Intel: soc-acpi: mtl: fix speaker no sound on Dell SKU 0C64
ASoC: q6apm-lpass-dai: close graph on prepare errors
ASoC: cs35l56: Disconnect ASP1 TX sources when ASP1 DAI is hooked up
ASoC: topology: Fix route memory corruption
ASoC: rt722-sdca-sdw: add debounce time for type detection
ASoC: SOF: sof-audio: Skip unprepare for in-use widgets on error rollback
...
Building with W=1 in some configurations produces a false positive
warning for kallsyms:
kernel/kallsyms.c: In function '__sprint_symbol.isra':
kernel/kallsyms.c:503:17: error: 'strcpy' source argument is the same as destination [-Werror=restrict]
503 | strcpy(buffer, name);
| ^~~~~~~~~~~~~~~~~~~~
This originally showed up while building with -O3, but later started
happening in other configurations as well, depending on inlining
decisions. The underlying issue is that the local 'name' variable is
always initialized to the be the same as 'buffer' in the called functions
that fill the buffer, which gcc notices while inlining, though it could
see that the address check always skips the copy.
The calling conventions here are rather unusual, as all of the internal
lookup functions (bpf_address_lookup, ftrace_mod_address_lookup,
ftrace_func_address_lookup, module_address_lookup and
kallsyms_lookup_buildid) already use the provided buffer and either return
the address of that buffer to indicate success, or NULL for failure,
but the callers are written to also expect an arbitrary other buffer
to be returned.
Rework the calling conventions to return the length of the filled buffer
instead of its address, which is simpler and easier to follow as well
as avoiding the warning. Leave only the kallsyms_lookup() calling conventions
unchanged, since that is called from 16 different functions and
adapting this would be a much bigger change.
projects / users / jedix / linux-maple.git / log